Merge tag 'omap-for-v4.7/dt-part1' of...

Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren:

- Two sets of name and unit address check fixes for dts files.

- DMA, McASP, and timer and regulator related dts changes for dra7

- Add more devices for Nokia N9/N950

- Initial support for am335x ICEv2

- Initial support for am572x-IDK

- Pinctrl changes for am335x-baltos-ir5221

- Initial support for Amazon Kindle Fire (first generation)

- A series of changes to add GPIO controller support for the
  GPMC driver. The driver changes will be merged separately.

- Support for am43xx clkout1

- Pinctrl and RTC changes for am335x-chili

- Add support for dra72-evm rev C (SR2.0)

* tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits)
  ARM: dts: Add support for dra72-evm rev C (SR2.0)
  ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal
  ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board
  ARM: dts: am335x-chili*: Move uart0 description from SOM to board
  ARM: dts: am43xx: add support for clkout1 clock
  ARM: dts: omap3-beagle: Provide NAND ready pin
  ARM: dts: am335x: Provide NAND ready pin
  ARM: dts: am437x: Provide NAND ready pin
  ARM: dts: dra7x-evm: Provide NAND ready pin
  ARM: dts: dm816x: Enable gpio controller for GPMC
  ARM: dts: dm814x: Enable gpio controller for GPMC
  ARM: dts: omap3: Enable gpio controller for GPMC
  ARM: dts: am4372: Enable gpio controller for GPMC
  ARM: dts: am335x: Enable gpio controller for GPMC
  ARM: dts: dra7: Enable gpio controller for GPMC
  ARM: dts: omap5: Enable gpio and interrupt controller for GPMC
  ARM: dts: omap4: Enable gpio and interrupt controller for GPMC
  ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC
  ARM: dts: omap4-kc1: Power off support
  ARM: dts: omap4-kc1: LEDs support
  ...

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -133,6 +133,9 @@ Boards:
 - AM335X Bone : Low cost community board
   compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
 
+- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM.
+  compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3"
+
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"
 
@@ -169,6 +172,9 @@ Boards:
 - AM57XX SBC-AM57x
   compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
 
+- AM5728 IDK
+  compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -16,6 +16,7 @@ al	Annapurna Labs
 allwinner	Allwinner Technology Co., Ltd.
 alphascale	AlphaScale Integrated Circuits Systems, Inc.
 altr	Altera Corp.
+amazon	Amazon.com, Inc.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amd	Advanced Micro Devices (AMD), Inc.
 amlogic	Amlogic, Inc.

arch/arm/boot/dts/Makefile

@@ -511,6 +511,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
+	am335x-icev2.dtb \
 	am335x-lxm.dtb \
 	am335x-nano.dtb \
 	am335x-pepper.dtb \
@@ -520,6 +521,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-duovero-parlor.dtb \
+	omap4-kc1.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -543,8 +545,10 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
+	am572x-idk.dtb \
 	dra7-evm.dtb \
-	dra72-evm.dtb
+	dra72-evm.dtb \
+	dra72-evm-revc.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-kuroboxpro.dtb \
 	orion5x-lacie-d2-network.dtb \

arch/arm/boot/dts/am335x-baltos-ir5221.dts

@@ -109,8 +109,8 @@ uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
 			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
 			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
 			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
 			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
@@ -122,8 +122,8 @@ uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
 			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
 			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
 			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
 			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
@@ -241,6 +241,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		ti,nand-xfer-type = "polled";
@@ -287,8 +288,6 @@ &uart1 {
 	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
 	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-	rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 
 	status = "okay";
 };
@@ -300,8 +299,6 @@ &uart2 {
 	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-	rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 
 	status = "okay";
 };

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -35,6 +35,59 @@ led1 {
 };
 
 &am33xx_pinmux {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
@@ -61,12 +114,34 @@ AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
 	};
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
 &ldo4_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 };
 
 /* Ethernet */
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";

arch/arm/boot/dts/am335x-chilisom.dtsi

@@ -35,59 +35,6 @@ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
 	nandflash_pins: nandflash_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
@@ -109,13 +56,6 @@ AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cl
 	};
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -182,20 +122,8 @@ ldo4_reg: regulator@6 {
 	};
 };
 
-/* Ethernet MAC */
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+&rtc {
+	system-power-controller;
 };
 
 /* NAND Flash */
@@ -214,6 +142,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am335x-cm-t335.dts

@@ -411,6 +411,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am335x-evm.dts

@@ -524,6 +524,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am335x-icev2.dts

+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "TI AM3359 ICE-V2";
+	compatible = "ti,am3359-icev2", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds@0 {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	/* Tricolor status LEDs */
+	leds@1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led@0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led@1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led@4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: user_leds {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+		>;
+	};
+
+	mmc0_pins_default: mmc0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+		>;
+	};
+
+	spi0_pins_default: spi0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_default>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: power-controller@2d {
+		reg = <0x2d>;
+	};
+
+	tpic2810: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1326000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+};
+
+&gpio0 {
+	/* Do not idle the GPIO used for holding the VTT regulator */
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+	status = "okay";
+};

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -135,6 +135,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-width = <1>;

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -171,6 +171,7 @@ nandflash: nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-nand = "true";

arch/arm/boot/dts/am335x-shc.dts

@@ -138,7 +138,7 @@ ethernetphy0: ethernet-phy@0 {
 &epwmss1 {
 	status = "okay";
 
-	ehrpwm1: ehrpwm@48302200 {
+	ehrpwm1: pwm@48302200 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ehrpwm1_pins>;
 		status = "okay";

arch/arm/boot/dts/am33xx.dtsi

@@ -688,7 +688,7 @@ ecap0: ecap@48300100 {
 				status = "disabled";
 			};
 
-			ehrpwm0: ehrpwm@48300200 {
+			ehrpwm0: pwm@48300200 {
 				compatible = "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
@@ -718,7 +718,7 @@ ecap1: ecap@48302100 {
 				status = "disabled";
 			};
 
-			ehrpwm1: ehrpwm@48302200 {
+			ehrpwm1: pwm@48302200 {
 				compatible = "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
@@ -748,7 +748,7 @@ ecap2: ecap@48304100 {
 				status = "disabled";
 			};
 
-			ehrpwm2: ehrpwm@48304200 {
+			ehrpwm2: pwm@48304200 {
 				compatible = "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
@@ -868,6 +868,8 @@ gpmc: gpmc@50000000 {
 			#size-cells = <1>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/am35xx-clocks.dtsi

@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &scm_clocks {
-	emac_ick: emac_ick {
+	emac_ick: emac_ick@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -16,7 +16,7 @@ emac_ick: emac_ick {
 		ti,bit-shift = <1>;
 	};
 
-	emac_fck: emac_fck {
+	emac_fck: emac_fck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
@@ -24,7 +24,7 @@ emac_fck: emac_fck {
 		ti,bit-shift = <9>;
 	};
 
-	vpfe_ick: vpfe_ick {
+	vpfe_ick: vpfe_ick@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -32,7 +32,7 @@ vpfe_ick: vpfe_ick {
 		ti,bit-shift = <2>;
 	};
 
-	vpfe_fck: vpfe_fck {
+	vpfe_fck: vpfe_fck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
@@ -40,7 +40,7 @@ vpfe_fck: vpfe_fck {
 		ti,bit-shift = <10>;
 	};
 
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -48,7 +48,7 @@ hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
 		ti,bit-shift = <0>;
 	};
 
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
@@ -56,7 +56,7 @@ hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
 		ti,bit-shift = <8>;
 	};
 
-	hecc_ck: hecc_ck {
+	hecc_ck: hecc_ck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
@@ -65,7 +65,7 @@ hecc_ck: hecc_ck {
 	};
 };
 &cm_clocks {
-	ipss_ick: ipss_ick {
+	ipss_ick: ipss_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-interface-clock";
 		clocks = <&core_l3_ick>;
@@ -85,7 +85,7 @@ pclk_ck: pclk_ck {
 		clock-frequency = <27000000>;
 	};
 
-	uart4_ick_am35xx: uart4_ick_am35xx {
+	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -93,7 +93,7 @@ uart4_ick_am35xx: uart4_ick_am35xx {
 		ti,bit-shift = <23>;
 	};
 
-	uart4_fck_am35xx: uart4_fck_am35xx {
+	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;

arch/arm/boot/dts/am4372.dtsi

@@ -679,7 +679,7 @@ ecap0: ecap@48300100 {
 				status = "disabled";
 			};
 
-			ehrpwm0: ehrpwm@48300200 {
+			ehrpwm0: pwm@48300200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
@@ -705,7 +705,7 @@ ecap1: ecap@48302100 {
 				status = "disabled";
 			};
 
-			ehrpwm1: ehrpwm@48302200 {
+			ehrpwm1: pwm@48302200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
@@ -731,7 +731,7 @@ ecap2: ecap@48304100 {
 				status = "disabled";
 			};
 
-			ehrpwm2: ehrpwm@48304200 {
+			ehrpwm2: pwm@48304200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
@@ -749,7 +749,7 @@ epwmss3: epwmss@48306000 {
 			ti,hwmods = "epwmss3";
 			status = "disabled";
 
-			ehrpwm3: ehrpwm@48306200 {
+			ehrpwm3: pwm@48306200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
@@ -767,7 +767,7 @@ epwmss4: epwmss@48308000 {
 			ti,hwmods = "epwmss4";
 			status = "disabled";
 
-			ehrpwm4: ehrpwm@48308200 {
+			ehrpwm4: pwm@48308200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
@@ -785,7 +785,7 @@ epwmss5: epwmss@4830a000 {
 			ti,hwmods = "epwmss5";
 			status = "disabled";
 
-			ehrpwm5: ehrpwm@4830a200 {
+			ehrpwm5: pwm@4830a200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x4830a200 0x80>;
@@ -896,6 +896,8 @@ gpmc: gpmc@50000000 {
 			#size-cells = <1>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -119,7 +119,7 @@ clk_32k_rtc: clk_32k_rtc {
 		clock-frequency = <32768>;
 	};
 
-	sound0: sound@0 {
+	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "AM437x-GP-EVM";
 		simple-audio-card,widgets =
@@ -817,6 +817,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -107,7 +107,7 @@ backlight {
 		default-brightness-level = <8>;
 	};
 
-	sound0: sound@0 {
+	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "AM43-EPOS-EVM";
 		simple-audio-card,widgets =
@@ -568,6 +568,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am572x-idk.dts

+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	model = "TI AM5728 IDK";
+	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
+		     "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vmmc_aux-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -151,7 +151,7 @@ tpd12s015_out: endpoint {
 		};
 	};
 
-	sound0: sound@0 {
+	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "BeagleBoard-X15";
 		simple-audio-card,widgets =
@@ -173,8 +173,6 @@ simple-audio-card,cpu {
 
 		sound0_master: simple-audio-card,codec {
 			sound-dai = <&tlv320aic3104>;
-			assigned-clocks = <&clkoutmux2_clk_mux>;
-			assigned-clock-parents = <&sys_clk2_dclk_div>;
 			clocks = <&clkout2_clk>;
 		};
 	};
@@ -584,6 +582,9 @@ tlv320aic3104: tlv320aic3104@18 {
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&clkout2_pins_default>;
 		pinctrl-1 = <&clkout2_pins_sleep>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
 		status = "okay";
 		adc-settle-ms = <40>;
 
@@ -812,6 +813,8 @@ &mcasp3 {
 	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
 		1 2 0 0
 	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &mailbox5 {

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -51,7 +51,7 @@ ads7846reg: fixedregulator-ads7846-reg {
 		regulator-max-microvolt = <3300000>;
 	};
 
-	sound0: sound@0 {
+	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
 		simple-audio-card,format = "i2s";

arch/arm/boot/dts/am57xx-idk-common.dtsi

+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "VMAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&v3_3d>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x418>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					vin-supply = <&vmain>;
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					vin-supply = <&vmain>;
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					/* VDD_IVA + VDD_DSP on AM571 */
+					vin-supply = <&vmain>;
+					regulator-name = "smps45";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					vin-supply = <&vmain>;
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					vin-supply = <&vmain>;
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* 5728 - VDD_IVAHD */
+					/* 5718 - N.C. test point */
+					vin-supply = <&vmain>;
+					regulator-name = "smps8";
+				};
+
+				smps9_reg: smps9 {
+					/* VDD_3_3D */
+					vin-supply = <&vmain>;
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					/* NOTE: on rev 1.3a, data supply */
+					vin-supply = <&vmain>;
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDDSH18V */
+					vin-supply = <&vmain>;
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					vin-supply = <&vmain>;
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					vin-supply = <&vmain>;
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC  */
+					vin-supply = <&vmain>;
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					vin-supply = <&vmain>;
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					vin-supply = <&vmain>;
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					vin-supply = <&vmain>;
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x248>;
+};
+
+&rtc {
+	status = "okay";
+	ext-clk-src;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "otg";
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	bus-width = <8>;
+	ti,non-removable;
+	max-frequency = <96000000>;
+};

arch/arm/boot/dts/da850.dtsi

@@ -261,13 +261,13 @@ mmc1: mmc@21b000 {
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		ehrpwm0: ehrpwm@300000 {
+		ehrpwm0: pwm@300000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
-		ehrpwm1: ehrpwm@302000 {
+		ehrpwm1: pwm@302000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;

arch/arm/boot/dts/dm814x-clocks.dtsi

@@ -5,7 +5,7 @@
  */
 
 &pllss_clocks {
-	timer1_fck: timer1_fck {
+	timer1_fck: timer1_fck@2e0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
@@ -14,7 +14,7 @@ timer1_fck: timer1_fck {
 		reg = <0x2e0>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: timer2_fck@2e0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
@@ -23,7 +23,7 @@ timer2_fck: timer2_fck {
 		reg = <0x2e0>;
 	};
 
-	sysclk18_ck: sysclk18_ck {
+	sysclk18_ck: sysclk18_ck@2f0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
@@ -33,7 +33,7 @@ sysclk18_ck: sysclk18_ck {
 };
 
 &scm_clocks {
-	devosc_ck: devosc_ck {
+	devosc_ck: devosc_ck@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
@@ -121,7 +121,7 @@ osc_src_ck: osc_src_ck {
 		clock-div = <1>;
 	};
 
-	mpu_clksrc_ck: mpu_clksrc_ck {
+	mpu_clksrc_ck: mpu_clksrc_ck@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&devosc_ck>, <&rtcdivider_ck>;

arch/arm/boot/dts/dm814x.dtsi

@@ -568,6 +568,8 @@ gpmc: gpmc@50000000 {
 			#size-cells = <1>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 	};
 };

arch/arm/boot/dts/dm816x-clocks.dtsi

@@ -86,7 +86,7 @@ sys_clkin_ck: sys_clkin_ck {
 
 /* 0x48180000 */
 &prcm_clocks {
-	clkout_pre_ck: clkout_pre_ck {
+	clkout_pre_ck: clkout_pre_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
@@ -94,7 +94,7 @@ clkout_pre_ck: clkout_pre_ck {
 		reg = <0x100>;
 	};
 
-	clkout_div_ck: clkout_div_ck {
+	clkout_div_ck: clkout_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&clkout_pre_ck>;
@@ -103,7 +103,7 @@ clkout_div_ck: clkout_div_ck {
 		reg = <0x100>;
 	};
 
-	clkout_ck: clkout_ck {
+	clkout_ck: clkout_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkout_div_ck>;
@@ -112,7 +112,7 @@ clkout_ck: clkout_ck {
 	};
 
 	/* CM_DPLL clocks p1795 */
-	sysclk1_ck: sysclk1_ck {
+	sysclk1_ck: sysclk1_ck@300 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 1>;
@@ -120,7 +120,7 @@ sysclk1_ck: sysclk1_ck {
 		reg = <0x0300>;
 	};
 
-	sysclk2_ck: sysclk2_ck {
+	sysclk2_ck: sysclk2_ck@304 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 2>;
@@ -128,7 +128,7 @@ sysclk2_ck: sysclk2_ck {
 		reg = <0x0304>;
 	};
 
-	sysclk3_ck: sysclk3_ck {
+	sysclk3_ck: sysclk3_ck@308 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 3>;
@@ -136,7 +136,7 @@ sysclk3_ck: sysclk3_ck {
 		reg = <0x0308>;
 	};
 
-	sysclk4_ck: sysclk4_ck {
+	sysclk4_ck: sysclk4_ck@30c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 4>;
@@ -144,7 +144,7 @@ sysclk4_ck: sysclk4_ck {
 		reg = <0x030c>;
 	};
 
-	sysclk5_ck: sysclk5_ck {
+	sysclk5_ck: sysclk5_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sysclk4_ck>;
@@ -152,7 +152,7 @@ sysclk5_ck: sysclk5_ck {
 		reg = <0x0310>;
 	};
 
-	sysclk6_ck: sysclk6_ck {
+	sysclk6_ck: sysclk6_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 4>;
@@ -160,7 +160,7 @@ sysclk6_ck: sysclk6_ck {
 		reg = <0x0314>;
 	};
 
-	sysclk10_ck: sysclk10_ck {
+	sysclk10_ck: sysclk10_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&ddr_fapll 2>;
@@ -168,7 +168,7 @@ sysclk10_ck: sysclk10_ck {
 		reg = <0x0324>;
 	};
 
-	sysclk24_ck: sysclk24_ck {
+	sysclk24_ck: sysclk24_ck@3b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 5>;
@@ -176,7 +176,7 @@ sysclk24_ck: sysclk24_ck {
 		reg = <0x03b4>;
 	};
 
-	mpu_ck: mpu_ck {
+	mpu_ck: mpu_ck@15dc {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sysclk2_ck>;
@@ -184,7 +184,7 @@ mpu_ck: mpu_ck {
                 reg = <0x15dc>;
 	};
 
-	audio_pll_a_ck: audio_pll_a_ck {
+	audio_pll_a_ck: audio_pll_a_ck@35c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&audio_fapll 1>;
@@ -192,56 +192,56 @@ audio_pll_a_ck: audio_pll_a_ck {
 		reg = <0x035c>;
 	};
 
-	sysclk18_ck: sysclk18_ck {
+	sysclk18_ck: sysclk18_ck@378 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
 		reg = <0x0378>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: timer1_fck@390 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0390>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: timer2_fck@394 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0394>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: timer3_fck@398 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0398>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: timer4_fck@39c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x039c>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: timer5_fck@3a0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a0>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: timer6_fck@3a4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a4>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: timer7_fck@3a8 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;

arch/arm/boot/dts/dm816x.dtsi

@@ -185,6 +185,8 @@ gpmc: gpmc@50000000 {
 			gpmc,num-waitpins = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		i2c1: i2c@48028000 {

arch/arm/boot/dts/dra7-evm.dts

@@ -33,6 +33,7 @@ evm_3v3_sd: fixedregulator-sd {
 	evm_3v3_sw: fixedregulator-evm_3v3_sw {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3_sw";
+		vin-supply = <&sysen1>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -64,10 +65,11 @@ vtt_fixed: fixedregulator-vtt {
 		regulator-always-on;
 		regulator-boot-on;
 		enable-active-high;
+		vin-supply = <&sysen2>;
 		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
 
-	sound0: sound@0 {
+	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "DRA7xx-EVM";
 		simple-audio-card,widgets =
@@ -254,8 +256,9 @@ DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 	nand_flash_x16: nand_flash_x16 {
 		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
 		 * So NAND flash requires following switch settings:
-		 * SW5.9 (GPMC_WPN) = LOW
-		 * SW5.1 (NAND_BOOTn) = HIGH */
+		 * SW5.1 (NAND_BOOTn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
 			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
@@ -523,6 +526,31 @@ ldousb_reg: ldousb {
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
 				};
+
+				/* REGEN1 is unused */
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resources */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				/* REGEN3 is unused */
+
+				sysen1: sysen1 {
+					/* PMIC_REGEN_3V3 */
+					regulator-name = "sysen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sysen2: sysen2 {
+					/* PMIC_REGEN_DDR */
+					regulator-name = "sysen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
 			};
 		};
 	};
@@ -539,7 +567,7 @@ pcf_lcd: gpio@20 {
 	};
 
 	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x21>;
 		lines-initial-states = <0x1408>;
 		gpio-controller;
@@ -748,6 +776,7 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -904,6 +933,8 @@ &mcasp3 {
 	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 		1 2 0 0
 	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &mailbox5 {

arch/arm/boot/dts/dra7.dtsi

@@ -123,7 +123,7 @@ scm_conf: scm_conf@0 {
 					#size-cells = <1>;
 					ranges = <0 0x0 0x1400>;
 
-					pbias_regulator: pbias_regulator {
+					pbias_regulator: pbias_regulator@e00 {
 						compatible = "ti,pbias-dra7", "ti,pbias-omap";
 						reg = <0xe00 0x4>;
 						syscon = <&scm_conf>;
@@ -161,6 +161,24 @@ scm_conf_pcie: scm_conf@1c24 {
 					compatible = "syscon";
 					reg = <0x1c24 0x0024>;
 				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -315,13 +333,43 @@ sdma: dma-controller@4a056000 {
 			dma-requests = <127>;
 		};
 
-		sdma_xbar: dma-router@4a002b78 {
-			compatible = "ti,dra7-dma-crossbar";
-			reg = <0x4a002b78 0xfc>;
-			#dma-cells = <1>;
-			dma-requests = <205>;
-			ti,dma-safe-map = <0>;
-			dma-masters = <&sdma>;
+		edma: edma@43300000 {
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg = <0x43300000 0x100000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+			/*
+			 * memcpy is disabled, can be enabled with:
+			 * ti,edma-memcpy-channels = <20 21>;
+			 * for example. Note that these channels need to be
+			 * masked in the xbar as well.
+			 */
+		};
+
+		edma_tptc0: tptc@43400000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x43400000 0x100000>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@43500000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x43500000 0x100000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -773,12 +821,20 @@ timer11: timer@48088000 {
 			ti,hwmods = "timer11";
 		};
 
+		timer12: timer@4ae20000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae20000 0x80>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
+
 		timer13: timer@48828000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48828000 0x80>;
 			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer13";
-			status = "disabled";
 		};
 
 		timer14: timer@4882a000 {
@@ -786,7 +842,6 @@ timer14: timer@4882a000 {
 			reg = <0x4882a000 0x80>;
 			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer14";
-			status = "disabled";
 		};
 
 		timer15: timer@4882c000 {
@@ -794,7 +849,6 @@ timer15: timer@4882c000 {
 			reg = <0x4882c000 0x80>;
 			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer15";
-			status = "disabled";
 		};
 
 		timer16: timer@4882e000 {
@@ -802,7 +856,6 @@ timer16: timer@4882e000 {
 			reg = <0x4882e000 0x80>;
 			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer16";
-			status = "disabled";
 		};
 
 		wdt2: wdt@4ae14000 {
@@ -1404,6 +1457,8 @@ gpmc: gpmc@50000000 {
 			#size-cells = <1>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 
@@ -1418,21 +1473,136 @@ atl: atl@4843c000 {
 			status = "disabled";
 		};
 
+		mcasp1: mcasp@48460000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x48460000 0x2000>,
+			      <0x45800000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
+				 <&mcasp1_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp@48464000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp2";
+			reg = <0x48464000 0x2000>,
+			      <0x45c00000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
+				 <&mcasp2_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
 		mcasp3: mcasp@48468000 {
 			compatible = "ti,dra7-mcasp-audio";
 			ti,hwmods = "mcasp3";
-			reg = <0x48468000 0x2000>;
-			reg-names = "mpu";
+			reg = <0x48468000 0x2000>,
+			      <0x46000000 0x1000>;
+			reg-names = "mpu","dat";
 			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
-			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
 			dma-names = "tx", "rx";
 			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
 
+		mcasp4: mcasp@4846c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp4";
+			reg = <0x4846c000 0x2000>,
+			      <0x48436000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp5: mcasp@48470000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp5";
+			reg = <0x48470000 0x2000>,
+			      <0x4843a000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp6: mcasp@48474000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp6";
+			reg = <0x48474000 0x2000>,
+			      <0x4844c000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp7: mcasp@48478000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp7";
+			reg = <0x48478000 0x2000>,
+			      <0x48450000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp8: mcasp@4847c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp8";
+			reg = <0x4847c000 0x2000>,
+			      <0x48454000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;

arch/arm/boot/dts/dra72-evm-revc.dts

+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "dra72-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA722 Rev C EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+};
+
+&tps65917_regulators {
+	ldo2_reg: ldo2 {
+		/* LDO2_OUT --> VDDA_1V8_PHY2 */
+		regulator-name = "ldo2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo2_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio3>;
+	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+};

arch/arm/boot/dts/omap2420-clocks.dtsi

@@ -9,7 +9,7 @@
  */
 
 &prcm_clocks {
-	sys_clkout2_src_gate: sys_clkout2_src_gate {
+	sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&core_ck>;
@@ -17,7 +17,7 @@ sys_clkout2_src_gate: sys_clkout2_src_gate {
 		reg = <0x0070>;
 	};
 
-	sys_clkout2_src_mux: sys_clkout2_src_mux {
+	sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
@@ -31,7 +31,7 @@ sys_clkout2_src: sys_clkout2_src {
 		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
 	};
 
-	sys_clkout2: sys_clkout2 {
+	sys_clkout2: sys_clkout2@70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkout2_src>;
@@ -41,7 +41,7 @@ sys_clkout2: sys_clkout2 {
 		ti,index-power-of-two;
 	};
 
-	dsp_gate_ick: dsp_gate_ick {
+	dsp_gate_ick: dsp_gate_ick@810 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-interface-clock";
 		clocks = <&dsp_fck>;
@@ -49,7 +49,7 @@ dsp_gate_ick: dsp_gate_ick {
 		reg = <0x0810>;
 	};
 
-	dsp_div_ick: dsp_div_ick {
+	dsp_div_ick: dsp_div_ick@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&dsp_fck>;
@@ -65,7 +65,7 @@ dsp_ick: dsp_ick {
 		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
 	};
 
-	iva1_gate_ifck: iva1_gate_ifck {
+	iva1_gate_ifck: iva1_gate_ifck@800 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -73,7 +73,7 @@ iva1_gate_ifck: iva1_gate_ifck {
 		reg = <0x0800>;
 	};
 
-	iva1_div_ifck: iva1_div_ifck {
+	iva1_div_ifck: iva1_div_ifck@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_ck>;
@@ -96,7 +96,7 @@ iva1_ifck_div: iva1_ifck_div {
 		clock-div = <2>;
 	};
 
-	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
+	iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&iva1_ifck_div>;
@@ -104,7 +104,7 @@ iva1_mpu_int_ifck: iva1_mpu_int_ifck {
 		reg = <0x0800>;
 	};
 
-	wdt3_ick: wdt3_ick {
+	wdt3_ick: wdt3_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -112,7 +112,7 @@ wdt3_ick: wdt3_ick {
 		reg = <0x0210>;
 	};
 
-	wdt3_fck: wdt3_fck {
+	wdt3_fck: wdt3_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -120,7 +120,7 @@ wdt3_fck: wdt3_fck {
 		reg = <0x0200>;
 	};
 
-	mmc_ick: mmc_ick {
+	mmc_ick: mmc_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -128,7 +128,7 @@ mmc_ick: mmc_ick {
 		reg = <0x0210>;
 	};
 
-	mmc_fck: mmc_fck {
+	mmc_fck: mmc_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -136,7 +136,7 @@ mmc_fck: mmc_fck {
 		reg = <0x0200>;
 	};
 
-	eac_ick: eac_ick {
+	eac_ick: eac_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -144,7 +144,7 @@ eac_ick: eac_ick {
 		reg = <0x0210>;
 	};
 
-	eac_fck: eac_fck {
+	eac_fck: eac_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -152,7 +152,7 @@ eac_fck: eac_fck {
 		reg = <0x0200>;
 	};
 
-	i2c1_fck: i2c1_fck {
+	i2c1_fck: i2c1_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_12m_ck>;
@@ -160,7 +160,7 @@ i2c1_fck: i2c1_fck {
 		reg = <0x0200>;
 	};
 
-	i2c2_fck: i2c2_fck {
+	i2c2_fck: i2c2_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_12m_ck>;
@@ -168,7 +168,7 @@ i2c2_fck: i2c2_fck {
 		reg = <0x0200>;
 	};
 
-	vlynq_ick: vlynq_ick {
+	vlynq_ick: vlynq_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l3_ck>;
@@ -176,7 +176,7 @@ vlynq_ick: vlynq_ick {
 		reg = <0x0210>;
 	};
 
-	vlynq_gate_fck: vlynq_gate_fck {
+	vlynq_gate_fck: vlynq_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -192,7 +192,7 @@ core_d18_ck: core_d18_ck {
 		clock-div = <18>;
 	};
 
-	vlynq_mux_fck: vlynq_mux_fck {
+	vlynq_mux_fck: vlynq_mux_fck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;

arch/arm/boot/dts/omap2420-n8x0-common.dtsi

@@ -7,7 +7,7 @@ memory {
 	};
 
 	ocp {
-		i2c@0 {
+		i2c0 {
 			compatible = "i2c-cbus-gpio";
 			gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
 				 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */

arch/arm/boot/dts/omap2420.dtsi

@@ -130,6 +130,10 @@ gpmc: gpmc@6800a000 {
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		mcbsp1: mcbsp@48074000 {

arch/arm/boot/dts/omap2430-clocks.dtsi

@@ -9,7 +9,7 @@
  */
 
 &scm_clocks {
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
+	mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -22,7 +22,7 @@ mcbsp3_fck: mcbsp3_fck {
 		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
 	};
 
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
+	mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -36,7 +36,7 @@ mcbsp4_fck: mcbsp4_fck {
 		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
 	};
 
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
+	mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -52,7 +52,7 @@ mcbsp5_fck: mcbsp5_fck {
 };
 
 &prcm_clocks {
-	iva2_1_gate_ick: iva2_1_gate_ick {
+	iva2_1_gate_ick: iva2_1_gate_ick@800 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&dsp_fck>;
@@ -60,7 +60,7 @@ iva2_1_gate_ick: iva2_1_gate_ick {
 		reg = <0x0800>;
 	};
 
-	iva2_1_div_ick: iva2_1_div_ick {
+	iva2_1_div_ick: iva2_1_div_ick@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&dsp_fck>;
@@ -76,7 +76,7 @@ iva2_1_ick: iva2_1_ick {
 		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
 	};
 
-	mdm_gate_ick: mdm_gate_ick {
+	mdm_gate_ick: mdm_gate_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-interface-clock";
 		clocks = <&core_ck>;
@@ -84,7 +84,7 @@ mdm_gate_ick: mdm_gate_ick {
 		reg = <0x0c10>;
 	};
 
-	mdm_div_ick: mdm_div_ick {
+	mdm_div_ick: mdm_div_ick@c40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_ck>;
@@ -98,7 +98,7 @@ mdm_ick: mdm_ick {
 		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
 	};
 
-	mdm_osc_ck: mdm_osc_ck {
+	mdm_osc_ck: mdm_osc_ck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&osc_ck>;
@@ -106,7 +106,7 @@ mdm_osc_ck: mdm_osc_ck {
 		reg = <0x0c00>;
 	};
 
-	mcbsp3_ick: mcbsp3_ick {
+	mcbsp3_ick: mcbsp3_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -114,7 +114,7 @@ mcbsp3_ick: mcbsp3_ick {
 		reg = <0x0214>;
 	};
 
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
+	mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -122,7 +122,7 @@ mcbsp3_gate_fck: mcbsp3_gate_fck {
 		reg = <0x0204>;
 	};
 
-	mcbsp4_ick: mcbsp4_ick {
+	mcbsp4_ick: mcbsp4_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -130,7 +130,7 @@ mcbsp4_ick: mcbsp4_ick {
 		reg = <0x0214>;
 	};
 
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
+	mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -138,7 +138,7 @@ mcbsp4_gate_fck: mcbsp4_gate_fck {
 		reg = <0x0204>;
 	};
 
-	mcbsp5_ick: mcbsp5_ick {
+	mcbsp5_ick: mcbsp5_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -146,7 +146,7 @@ mcbsp5_ick: mcbsp5_ick {
 		reg = <0x0214>;
 	};
 
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
+	mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -154,7 +154,7 @@ mcbsp5_gate_fck: mcbsp5_gate_fck {
 		reg = <0x0204>;
 	};
 
-	mcspi3_ick: mcspi3_ick {
+	mcspi3_ick: mcspi3_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -162,7 +162,7 @@ mcspi3_ick: mcspi3_ick {
 		reg = <0x0214>;
 	};
 
-	mcspi3_fck: mcspi3_fck {
+	mcspi3_fck: mcspi3_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -170,7 +170,7 @@ mcspi3_fck: mcspi3_fck {
 		reg = <0x0204>;
 	};
 
-	icr_ick: icr_ick {
+	icr_ick: icr_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -178,7 +178,7 @@ icr_ick: icr_ick {
 		reg = <0x0410>;
 	};
 
-	i2chs1_fck: i2chs1_fck {
+	i2chs1_fck: i2chs1_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2430-interface-clock";
 		clocks = <&func_96m_ck>;
@@ -186,7 +186,7 @@ i2chs1_fck: i2chs1_fck {
 		reg = <0x0204>;
 	};
 
-	i2chs2_fck: i2chs2_fck {
+	i2chs2_fck: i2chs2_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2430-interface-clock";
 		clocks = <&func_96m_ck>;
@@ -194,7 +194,7 @@ i2chs2_fck: i2chs2_fck {
 		reg = <0x0204>;
 	};
 
-	usbhs_ick: usbhs_ick {
+	usbhs_ick: usbhs_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l3_ck>;
@@ -202,7 +202,7 @@ usbhs_ick: usbhs_ick {
 		reg = <0x0214>;
 	};
 
-	mmchs1_ick: mmchs1_ick {
+	mmchs1_ick: mmchs1_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -210,7 +210,7 @@ mmchs1_ick: mmchs1_ick {
 		reg = <0x0214>;
 	};
 
-	mmchs1_fck: mmchs1_fck {
+	mmchs1_fck: mmchs1_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -218,7 +218,7 @@ mmchs1_fck: mmchs1_fck {
 		reg = <0x0204>;
 	};
 
-	mmchs2_ick: mmchs2_ick {
+	mmchs2_ick: mmchs2_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -226,7 +226,7 @@ mmchs2_ick: mmchs2_ick {
 		reg = <0x0214>;
 	};
 
-	mmchs2_fck: mmchs2_fck {
+	mmchs2_fck: mmchs2_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -234,7 +234,7 @@ mmchs2_fck: mmchs2_fck {
 		reg = <0x0204>;
 	};
 
-	gpio5_ick: gpio5_ick {
+	gpio5_ick: gpio5_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -242,7 +242,7 @@ gpio5_ick: gpio5_ick {
 		reg = <0x0214>;
 	};
 
-	gpio5_fck: gpio5_fck {
+	gpio5_fck: gpio5_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -250,7 +250,7 @@ gpio5_fck: gpio5_fck {
 		reg = <0x0204>;
 	};
 
-	mdm_intc_ick: mdm_intc_ick {
+	mdm_intc_ick: mdm_intc_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -258,7 +258,7 @@ mdm_intc_ick: mdm_intc_ick {
 		reg = <0x0214>;
 	};
 
-	mmchsdb1_fck: mmchsdb1_fck {
+	mmchsdb1_fck: mmchsdb1_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -266,7 +266,7 @@ mmchsdb1_fck: mmchsdb1_fck {
 		reg = <0x0204>;
 	};
 
-	mmchsdb2_fck: mmchsdb2_fck {
+	mmchsdb2_fck: mmchsdb2_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;

arch/arm/boot/dts/omap2430.dtsi

@@ -63,7 +63,7 @@ scm_clocks: clocks {
 						#size-cells = <0>;
 					};
 
-					pbias_regulator: pbias_regulator {
+					pbias_regulator: pbias_regulator@230 {
 						compatible = "ti,pbias-omap2", "ti,pbias-omap";
 						reg = <0x230 0x4>;
 						syscon = <&scm_conf>;
@@ -154,6 +154,10 @@ gpmc: gpmc@6e000000 {
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		mcbsp1: mcbsp@48074000 {

arch/arm/boot/dts/omap3-beagle.dts

@@ -390,6 +390,7 @@ nand@0,0 {
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <16>;
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/omap3-n9.dts

@@ -57,3 +57,17 @@ csi2a_ep: endpoint {
 &modem {
 	compatible = "nokia,n9-modem";
 };
+
+&lis302 {
+	st,axis-x = <1>;    /* LIS3_DEV_X */
+	st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-46)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <46>;
+	st,max-limit-z = <46>;
+};

arch/arm/boot/dts/omap3.dtsi

@@ -43,7 +43,7 @@ cpu@0 {
 		};
 	};
 
-	pmu {
+	pmu@54000000 {
 		compatible = "arm,cortex-a8-pmu";
 		reg = <0x54000000 0x800000>;
 		interrupts = <3>;
@@ -119,7 +119,7 @@ scm_conf: scm_conf@270 {
 					#size-cells = <1>;
 					ranges = <0 0x270 0x330>;
 
-					pbias_regulator: pbias_regulator {
+					pbias_regulator: pbias_regulator@2b0 {
 						compatible = "ti,pbias-omap3", "ti,pbias-omap";
 						reg = <0x2b0 0x4>;
 						syscon = <&scm_conf>;
@@ -725,6 +725,8 @@ gpmc: gpmc@6e000000 {
 			#size-cells = <1>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		usb_otg_hs: usb_otg_hs@480ab000 {

arch/arm/boot/dts/omap34xx.dtsi

@@ -55,7 +55,7 @@ ports {
 			};
 		};
 
-		bandgap {
+		bandgap@48002524 {
 			reg = <0x48002524 0x4>;
 			compatible = "ti,omap34xx-bandgap";
 			#thermal-sensor-cells = <0>;

arch/arm/boot/dts/omap36xx.dtsi

@@ -87,7 +87,7 @@ ports {
 			};
 		};
 
-		bandgap {
+		bandgap@48002524 {
 			reg = <0x48002524 0x4>;
 			compatible = "ti,omap36xx-bandgap";
 			#thermal-sensor-cells = <0>;

arch/arm/boot/dts/omap4-var-som-om44.dtsi

@@ -17,7 +17,7 @@ memory {
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	sound: sound@0 {
+	sound: sound {
 		compatible = "ti,abe-twl6040";
 		ti,model = "VAR-SOM-OM44";