Commit 1ece06ac authored by Dmitry Osipenko's avatar Dmitry Osipenko Committed by Pavel Machek

leds: Add driver for Acer Iconia Tab A500

Acer Iconia Tab A500 is an Android tablet device which has two LEDs
embedded into the Power Button. Orange LED indicates "battery charging"
status and white LED indicates "wake-up/charge-done" status. The new LED
driver provides control over both LEDs to userspace.
Signed-off-by: default avatarDmitry Osipenko <digetx@gmail.com>
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
parent c4241abc
...@@ -921,6 +921,13 @@ config LEDS_SGM3140 ...@@ -921,6 +921,13 @@ config LEDS_SGM3140
This option enables support for the SGM3140 500mA Buck/Boost Charge This option enables support for the SGM3140 500mA Buck/Boost Charge
Pump LED Driver. Pump LED Driver.
config LEDS_ACER_A500
tristate "Power button LED support for Acer Iconia Tab A500"
depends on LEDS_CLASS && MFD_ACER_A500_EC
help
This option enables support for the Power Button LED of
Acer Iconia Tab A500.
comment "LED Triggers" comment "LED Triggers"
source "drivers/leds/trigger/Kconfig" source "drivers/leds/trigger/Kconfig"
......
...@@ -10,6 +10,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o ...@@ -10,6 +10,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers (keep this sorted, M-| sort) # LED Platform Drivers (keep this sorted, M-| sort)
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o
obj-$(CONFIG_LEDS_ACER_A500) += leds-acer-a500.o
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_AN30259A) += leds-an30259a.o obj-$(CONFIG_LEDS_AN30259A) += leds-an30259a.o
obj-$(CONFIG_LEDS_APU) += leds-apu.o obj-$(CONFIG_LEDS_APU) += leds-apu.o
......
// SPDX-License-Identifier: GPL-2.0+
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#define A500_EC_LED_DELAY_USEC (100 * 1000)
enum {
REG_RESET_LEDS = 0x40,
REG_POWER_LED_ON = 0x42,
REG_CHARGE_LED_ON = 0x43,
REG_ANDROID_LEDS_OFF = 0x5a,
};
struct a500_led {
struct led_classdev cdev;
const struct reg_sequence *enable_seq;
struct a500_led *other;
struct regmap *rmap;
};
static const struct reg_sequence a500_ec_leds_reset_seq[] = {
REG_SEQ(REG_RESET_LEDS, 0x0, A500_EC_LED_DELAY_USEC),
REG_SEQ(REG_ANDROID_LEDS_OFF, 0x0, A500_EC_LED_DELAY_USEC),
};
static const struct reg_sequence a500_ec_white_led_enable_seq[] = {
REG_SEQ(REG_POWER_LED_ON, 0x0, A500_EC_LED_DELAY_USEC),
};
static const struct reg_sequence a500_ec_orange_led_enable_seq[] = {
REG_SEQ(REG_CHARGE_LED_ON, 0x0, A500_EC_LED_DELAY_USEC),
};
static int a500_ec_led_brightness_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct a500_led *led = container_of(led_cdev, struct a500_led, cdev);
struct reg_sequence control_seq[2];
unsigned int num_regs = 1;
if (value) {
control_seq[0] = led->enable_seq[0];
} else {
/*
* There is no separate controls which can disable LEDs
* individually, there is only RESET_LEDS command that turns
* off both LEDs.
*
* RESET_LEDS turns off both LEDs, thus restore other LED if
* it's turned ON.
*/
if (led->other->cdev.brightness)
num_regs = 2;
control_seq[0] = a500_ec_leds_reset_seq[0];
control_seq[1] = led->other->enable_seq[0];
}
return regmap_multi_reg_write(led->rmap, control_seq, num_regs);
}
static int a500_ec_leds_probe(struct platform_device *pdev)
{
struct a500_led *white_led, *orange_led;
struct regmap *rmap;
int err;
rmap = dev_get_regmap(pdev->dev.parent, "KB930");
if (!rmap)
return -EINVAL;
/* reset and turn off LEDs */
regmap_multi_reg_write(rmap, a500_ec_leds_reset_seq, 2);
white_led = devm_kzalloc(&pdev->dev, sizeof(*white_led), GFP_KERNEL);
if (!white_led)
return -ENOMEM;
white_led->cdev.name = "power:white";
white_led->cdev.brightness_set_blocking = a500_ec_led_brightness_set;
white_led->cdev.flags = LED_CORE_SUSPENDRESUME;
white_led->cdev.max_brightness = 1;
white_led->enable_seq = a500_ec_white_led_enable_seq;
white_led->rmap = rmap;
orange_led = devm_kzalloc(&pdev->dev, sizeof(*orange_led), GFP_KERNEL);
if (!orange_led)
return -ENOMEM;
orange_led->cdev.name = "power:orange";
orange_led->cdev.brightness_set_blocking = a500_ec_led_brightness_set;
orange_led->cdev.flags = LED_CORE_SUSPENDRESUME;
orange_led->cdev.max_brightness = 1;
orange_led->enable_seq = a500_ec_orange_led_enable_seq;
orange_led->rmap = rmap;
white_led->other = orange_led;
orange_led->other = white_led;
err = devm_led_classdev_register(&pdev->dev, &white_led->cdev);
if (err) {
dev_err(&pdev->dev, "failed to register white LED\n");
return err;
}
err = devm_led_classdev_register(&pdev->dev, &orange_led->cdev);
if (err) {
dev_err(&pdev->dev, "failed to register orange LED\n");
return err;
}
return 0;
}
static struct platform_driver a500_ec_leds_driver = {
.driver = {
.name = "acer-a500-iconia-leds",
},
.probe = a500_ec_leds_probe,
};
module_platform_driver(a500_ec_leds_driver);
MODULE_DESCRIPTION("LED driver for Acer Iconia Tab A500 Power Button");
MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
MODULE_ALIAS("platform:acer-a500-iconia-leds");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment