Commit 1ed34da6 authored by Gokul Sriram Palanisamy's avatar Gokul Sriram Palanisamy Committed by Bjorn Andersson

arm64: dts: qcom: Add board support for HK10

Add initial support for IPQ8074 SoC based HK10-C1
and HK10-C2 evaluation boards.
Signed-off-by: default avatarGokul Sriram Palanisamy <gokulsri@codeaurora.org>
Link: https://lore.kernel.org/r/1614328110-28866-2-git-send-email-gokulsri@codeaurora.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 6215d3f0
......@@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
......
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include "ipq8074-hk10.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
};
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
*/
#include "ipq8074-hk10.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
};
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include "ipq8074.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
interrupt-parent = <&intc>;
aliases {
serial0 = &blsp1_uart5;
};
chosen {
stdout-path = "serial0";
};
memory {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
};
&blsp1_spi1 {
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
};
};
&blsp1_uart5 {
status = "ok";
};
&pcie0 {
status = "ok";
perst-gpio = <&tlmm 58 0x1>;
};
&pcie1 {
status = "ok";
perst-gpio = <&tlmm 61 0x1>;
};
&pcie_phy0 {
status = "ok";
};
&pcie_phy1 {
status = "ok";
};
&qpic_bam {
status = "ok";
};
&qpic_nand {
status = "ok";
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment