Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:

Bigger -fixes pile, mostly because I've included Ajax' DP dongle stuff,
as discussed on irc. Otherwise just small things:
- regression fix to finally make 6bpc auto-dither on dp work (Jani)
- reinstate an snb ctx w/a that accidentally got lost in a rework (Chris)
- fixup the DP train sequence, logic-goof-up uncovered by Coverty (Chris)
- fix set_caching locking (Ben)
- fix spurious segfault on con-current gtt mmap faulting (Dimitry and Mika)
- some pageflip correctness fixes (still hunting down some issues, but
  these are the worst offenders of confused code that we've tracked down
  thus far) from Chris and me
- fixup swizzling settings on vlv (Jesse)
- gt_mode w/a from Ben added, fixes snb gt1 rc6+hw ctx hangs.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix GT_MODE default value
  drm/i915: don't frob the vblank ts in finish_page_flip
  drm/i915: call drm_handle_vblank before finish_page_flip
  drm/i915: print warning if vmi915_gem_fault error is not handled
  drm/i915: EBUSY status handling added to i915_gem_fault().
  drm/i915: Try harder to complete DP training pattern 1
  drm/i915: set swizzling to none on VLV
  drm/dp: Make sink count DP 1.2 aware
  drm/dp: Document DP spec versions for various DPCD registers
  drm/i915/dp: Be smarter about connection sense for branch devices
  drm/i915/dp: Fetch downstream port info if needed during DPCD fetch
  drm/dp: Update DPCD defines
  drm: Export drm_probe_ddc()
  drm/i915: Flush the pending flips on the CRTC before modification
  drm/i915: Actually invalidate the TLB for the SandyBridge HW contexts w/a
  drm/i915: Fix set_caching locking
  drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag

drivers/gpu/drm/drm_edid.c

@@ -395,13 +395,14 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
  * \param adapter : i2c device adaptor
  * \return 1 on success
  */
-static bool
+bool
 drm_probe_ddc(struct i2c_adapter *adapter)
 {
 	unsigned char out;
 
 	return (drm_do_probe_ddc_edid(adapter, &out, 0, 1) == 0);
 }
+EXPORT_SYMBOL(drm_probe_ddc);
 
 /**
  * drm_get_edid - get EDID data, if available

drivers/gpu/drm/i915/i915_gem.c

@@ -1399,10 +1399,16 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	case 0:
 	case -ERESTARTSYS:
 	case -EINTR:
+	case -EBUSY:
+		/*
+		 * EBUSY is ok: this just means that another thread
+		 * already did the job.
+		 */
 		return VM_FAULT_NOPAGE;
 	case -ENOMEM:
 		return VM_FAULT_OOM;
 	default:
+		WARN_ON_ONCE(ret);
 		return VM_FAULT_SIGBUS;
 	}
 }
@@ -3217,10 +3223,6 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
 	enum i915_cache_level level;
 	int ret;
 
-	ret = i915_mutex_lock_interruptible(dev);
-	if (ret)
-		return ret;
-
 	switch (args->caching) {
 	case I915_CACHING_NONE:
 		level = I915_CACHE_NONE;
@@ -3232,6 +3234,10 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
 	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
 	if (&obj->base == NULL) {
 		ret = -ENOENT;

drivers/gpu/drm/i915/i915_gem_context.c

@@ -328,7 +328,7 @@ mi_set_context(struct intel_ring_buffer *ring,
 	 * itlb_before_ctx_switch.
 	 */
 	if (IS_GEN6(ring->dev) && ring->itlb_before_ctx_switch) {
-		ret = ring->flush(ring, 0, 0);
+		ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, 0);
 		if (ret)
 			return ret;
 	}

drivers/gpu/drm/i915/i915_gem_tiling.c

@@ -91,7 +91,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 	uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
 	uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
 
-	if (INTEL_INFO(dev)->gen >= 6) {
+	if (IS_VALLEYVIEW(dev)) {
+		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+	} else if (INTEL_INFO(dev)->gen >= 6) {
 		uint32_t dimm_c0, dimm_c1;
 		dimm_c0 = I915_READ(MAD_DIMM_C0);
 		dimm_c1 = I915_READ(MAD_DIMM_C1);

drivers/gpu/drm/i915/i915_irq.c

@@ -697,12 +697,12 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
 			intel_opregion_gse_intr(dev);
 
 		for (i = 0; i < 3; i++) {
+			if (de_iir & (DE_PIPEA_VBLANK_IVB << (5 * i)))
+				drm_handle_vblank(dev, i);
 			if (de_iir & (DE_PLANEA_FLIP_DONE_IVB << (5 * i))) {
 				intel_prepare_page_flip(dev, i);
 				intel_finish_page_flip_plane(dev, i);
 			}
-			if (de_iir & (DE_PIPEA_VBLANK_IVB << (5 * i)))
-				drm_handle_vblank(dev, i);
 		}
 
 		/* check event from PCH */
@@ -784,6 +784,12 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
 	if (de_iir & DE_GSE)
 		intel_opregion_gse_intr(dev);
 
+	if (de_iir & DE_PIPEA_VBLANK)
+		drm_handle_vblank(dev, 0);
+
+	if (de_iir & DE_PIPEB_VBLANK)
+		drm_handle_vblank(dev, 1);
+
 	if (de_iir & DE_PLANEA_FLIP_DONE) {
 		intel_prepare_page_flip(dev, 0);
 		intel_finish_page_flip_plane(dev, 0);
@@ -794,12 +800,6 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
 		intel_finish_page_flip_plane(dev, 1);
 	}
 
-	if (de_iir & DE_PIPEA_VBLANK)
-		drm_handle_vblank(dev, 0);
-
-	if (de_iir & DE_PIPEB_VBLANK)
-		drm_handle_vblank(dev, 1);
-
 	/* check event from PCH */
 	if (de_iir & DE_PCH_EVENT) {
 		if (pch_iir & hotplug_mask)

drivers/gpu/drm/i915/i915_reg.h

@@ -527,6 +527,9 @@
 # define VS_TIMER_DISPATCH				(1 << 6)
 # define MI_FLUSH_ENABLE				(1 << 12)
 
+#define GEN6_GT_MODE	0x20d0
+#define   GEN6_GT_MODE_HI	(1 << 9)
+
 #define GFX_MODE	0x02520
 #define GFX_MODE_GEN7	0x0229c
 #define RING_MODE_GEN7(ring)	((ring)->mmio_base+0x29c)

drivers/gpu/drm/i915/intel_display.c

@@ -2806,13 +2806,34 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc)
 	udelay(100);
 }
 
+static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long flags;
+	bool pending;
+
+	if (atomic_read(&dev_priv->mm.wedged))
+		return false;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	pending = to_intel_crtc(crtc)->unpin_work != NULL;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	return pending;
+}
+
 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (crtc->fb == NULL)
 		return;
 
+	wait_event(dev_priv->pending_flip_queue,
+		   !intel_crtc_has_pending_flip(crtc));
+
 	mutex_lock(&dev->struct_mutex);
 	intel_finish_fb(crtc->fb);
 	mutex_unlock(&dev->struct_mutex);
@@ -4370,7 +4391,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	/* default to 8bpc */
 	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
 	if (is_dp) {
-		if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
 			pipeconf |= PIPECONF_BPP_6 |
 				    PIPECONF_DITHER_EN |
 				    PIPECONF_DITHER_TYPE_SP;
@@ -4802,7 +4823,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		target_clock = adjusted_mode->clock;
 
 	/* determine panel color depth */
-	dither = intel_choose_pipe_bpp_dither(crtc, fb, &pipe_bpp, mode);
+	dither = intel_choose_pipe_bpp_dither(crtc, fb, &pipe_bpp,
+					      adjusted_mode);
 	if (is_lvds && dev_priv->lvds_dither)
 		dither = true;
 
@@ -6159,15 +6181,13 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 	struct intel_unpin_work *work;
 	struct drm_i915_gem_object *obj;
 	struct drm_pending_vblank_event *e;
-	struct timeval tnow, tvbl;
+	struct timeval tvbl;
 	unsigned long flags;
 
 	/* Ignore early vblank irqs */
 	if (intel_crtc == NULL)
 		return;
 
-	do_gettimeofday(&tnow);
-
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
 	if (work == NULL || !work->pending) {
@@ -6181,25 +6201,6 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 		e = work->event;
 		e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
 
-		/* Called before vblank count and timestamps have
-		 * been updated for the vblank interval of flip
-		 * completion? Need to increment vblank count and
-		 * add one videorefresh duration to returned timestamp
-		 * to account for this. We assume this happened if we
-		 * get called over 0.9 frame durations after the last
-		 * timestamped vblank.
-		 *
-		 * This calculation can not be used with vrefresh rates
-		 * below 5Hz (10Hz to be on the safe side) without
-		 * promoting to 64 integers.
-		 */
-		if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
-		    9 * crtc->framedur_ns) {
-			e->event.sequence++;
-			tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
-					     crtc->framedur_ns);
-		}
-
 		e->event.tv_sec = tvbl.tv_sec;
 		e->event.tv_usec = tvbl.tv_usec;
 
@@ -6216,9 +6217,8 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 
 	atomic_clear_mask(1 << intel_crtc->plane,
 			  &obj->pending_flip.counter);
-	if (atomic_read(&obj->pending_flip) == 0)
-		wake_up(&dev_priv->pending_flip_queue);
 
+	wake_up(&dev_priv->pending_flip_queue);
 	schedule_work(&work->work);
 
 	trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);

drivers/gpu/drm/i915/intel_dp.c

@@ -36,6 +36,7 @@
 #include <drm/i915_drm.h>
 #include "i915_drv.h"
 
+#define DP_RECEIVER_CAP_SIZE	0xf
 #define DP_LINK_STATUS_SIZE	6
 #define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
 
@@ -1796,8 +1797,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
 				break;
 		if (i == intel_dp->lane_count && voltage_tries == 5) {
-			++loop_tries;
-			if (loop_tries == 5) {
+			if (++loop_tries == 5) {
 				DRM_DEBUG_KMS("too many full retries, give up\n");
 				break;
 			}
@@ -1807,15 +1807,11 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 		}
 
 		/* Check to see if we've tried the same voltage 5 times */
-		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
-			++voltage_tries;
-			if (voltage_tries == 5) {
-				DRM_DEBUG_KMS("too many voltage retries, give up\n");
-				break;
-			}
-		} else
+		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) {
+			voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 			voltage_tries = 0;
-		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+		} else
+			++voltage_tries;
 
 		/* Compute new intel_dp->train_set as requested by target */
 		intel_get_adjust_train(intel_dp, link_status);
@@ -1963,12 +1959,25 @@ static bool
 intel_dp_get_dpcd(struct intel_dp *intel_dp)
 {
 	if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
-					   sizeof(intel_dp->dpcd)) &&
-	    (intel_dp->dpcd[DP_DPCD_REV] != 0)) {
-		return true;
-	}
+					   sizeof(intel_dp->dpcd)) == 0)
+		return false; /* aux transfer failed */
 
-	return false;
+	if (intel_dp->dpcd[DP_DPCD_REV] == 0)
+		return false; /* DPCD not present */
+
+	if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
+	      DP_DWN_STRM_PORT_PRESENT))
+		return true; /* native DP sink */
+
+	if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
+		return true; /* no per-port downstream info */
+
+	if (intel_dp_aux_native_read_retry(intel_dp, DP_DOWNSTREAM_PORT_0,
+					   intel_dp->downstream_ports,
+					   DP_MAX_DOWNSTREAM_PORTS) == 0)
+		return false; /* downstream port status fetch failed */
+
+	return true;
 }
 
 static void
@@ -2068,11 +2077,43 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	}
 }
 
+/* XXX this is probably wrong for multiple downstream ports */
 static enum drm_connector_status
 intel_dp_detect_dpcd(struct intel_dp *intel_dp)
 {
-	if (intel_dp_get_dpcd(intel_dp))
+	uint8_t *dpcd = intel_dp->dpcd;
+	bool hpd;
+	uint8_t type;
+
+	if (!intel_dp_get_dpcd(intel_dp))
+		return connector_status_disconnected;
+
+	/* if there's no downstream port, we're done */
+	if (!(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT))
+		return connector_status_connected;
+
+	/* If we're HPD-aware, SINK_COUNT changes dynamically */
+	hpd = !!(intel_dp->downstream_ports[0] & DP_DS_PORT_HPD);
+	if (hpd) {
+		uint8_t reg;
+		if (!intel_dp_aux_native_read_retry(intel_dp, DP_SINK_COUNT,
+						    &reg, 1))
+			return connector_status_unknown;
+		return DP_GET_SINK_COUNT(reg) ? connector_status_connected
+					      : connector_status_disconnected;
+	}
+
+	/* If no HPD, poke DDC gently */
+	if (drm_probe_ddc(&intel_dp->adapter))
 		return connector_status_connected;
+
+	/* Well we tried, say unknown for unreliable port types */
+	type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
+	if (type == DP_DS_PORT_TYPE_VGA || type == DP_DS_PORT_TYPE_NON_EDID)
+		return connector_status_unknown;
+
+	/* Anything else is out of spec, warn and ignore */
+	DRM_DEBUG_KMS("Broken DP branch device, ignoring\n");
 	return connector_status_disconnected;
 }
 

drivers/gpu/drm/i915/intel_drv.h

@@ -332,6 +332,7 @@ struct intel_hdmi {
 };
 
 #define DP_RECEIVER_CAP_SIZE		0xf
+#define DP_MAX_DOWNSTREAM_PORTS		0x10
 #define DP_LINK_CONFIGURATION_SIZE	9
 
 struct intel_dp {
@@ -346,6 +347,7 @@ struct intel_dp {
 	uint8_t link_bw;
 	uint8_t lane_count;
 	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
+	uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
 	struct i2c_adapter adapter;
 	struct i2c_algo_dp_aux_data algo;
 	bool is_pch_edp;

drivers/gpu/drm/i915/intel_pm.c

@@ -3474,6 +3474,11 @@ static void gen6_init_clock_gating(struct drm_device *dev)
 			   DISPPLANE_TRICKLE_FEED_DISABLE);
 		intel_flush_display_plane(dev_priv, pipe);
 	}
+
+	/* The default value should be 0x200 according to docs, but the two
+	 * platforms I checked have a 0 for this. (Maybe BIOS overrides?) */
+	I915_WRITE(GEN6_GT_MODE, _MASKED_BIT_DISABLE(0xffff));
+	I915_WRITE(GEN6_GT_MODE, _MASKED_BIT_ENABLE(GEN6_GT_MODE_HI));
 }
 
 static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)

include/drm/drm_crtc.h

@@ -878,6 +878,7 @@ extern char *drm_get_tv_subconnector_name(int val);
 extern char *drm_get_tv_select_name(int val);
 extern void drm_fb_release(struct drm_file *file_priv);
 extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
+extern bool drm_probe_ddc(struct i2c_adapter *adapter);
 extern struct edid *drm_get_edid(struct drm_connector *connector,
 				 struct i2c_adapter *adapter);
 extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);

include/drm/drm_dp_helper.h

@@ -26,7 +26,19 @@
 #include <linux/types.h>
 #include <linux/i2c.h>
 
-/* From the VESA DisplayPort spec */
+/*
+ * Unless otherwise noted, all values are from the DP 1.1a spec.  Note that
+ * DP and DPCD versions are independent.  Differences from 1.0 are not noted,
+ * 1.0 devices basically don't exist in the wild.
+ *
+ * Abbreviations, in chronological order:
+ *
+ * eDP: Embedded DisplayPort version 1
+ * DPI: DisplayPort Interoperability Guideline v1.1a
+ * 1.2: DisplayPort 1.2
+ *
+ * 1.2 formally includes both eDP and DPI definitions.
+ */
 
 #define AUX_NATIVE_WRITE	0x8
 #define AUX_NATIVE_READ		0x9
@@ -53,7 +65,7 @@
 
 #define DP_MAX_LANE_COUNT                   0x002
 # define DP_MAX_LANE_COUNT_MASK		    0x1f
-# define DP_TPS3_SUPPORTED		    (1 << 6)
+# define DP_TPS3_SUPPORTED		    (1 << 6) /* 1.2 */
 # define DP_ENHANCED_FRAME_CAP		    (1 << 7)
 
 #define DP_MAX_DOWNSPREAD                   0x003
@@ -69,19 +81,33 @@
 /* 10b = TMDS or HDMI */
 /* 11b = Other */
 # define DP_FORMAT_CONVERSION               (1 << 3)
+# define DP_DETAILED_CAP_INFO_AVAILABLE	    (1 << 4) /* DPI */
 
 #define DP_MAIN_LINK_CHANNEL_CODING         0x006
 
 #define DP_DOWN_STREAM_PORT_COUNT	    0x007
-#define  DP_PORT_COUNT_MASK		    0x0f
-#define  DP_OUI_SUPPORT			    (1 << 7)
-
-#define DP_EDP_CONFIGURATION_CAP            0x00d
-#define DP_TRAINING_AUX_RD_INTERVAL         0x00e
-
-#define DP_PSR_SUPPORT                      0x070
+# define DP_PORT_COUNT_MASK		    0x0f
+# define DP_MSA_TIMING_PAR_IGNORED	    (1 << 6) /* eDP */
+# define DP_OUI_SUPPORT			    (1 << 7)
+
+#define DP_I2C_SPEED_CAP		    0x00c    /* DPI */
+# define DP_I2C_SPEED_1K		    0x01
+# define DP_I2C_SPEED_5K		    0x02
+# define DP_I2C_SPEED_10K		    0x04
+# define DP_I2C_SPEED_100K		    0x08
+# define DP_I2C_SPEED_400K		    0x10
+# define DP_I2C_SPEED_1M		    0x20
+
+#define DP_EDP_CONFIGURATION_CAP            0x00d   /* XXX 1.2? */
+#define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
+
+/* Multiple stream transport */
+#define DP_MSTM_CAP			    0x021   /* 1.2 */
+# define DP_MST_CAP			    (1 << 0)
+
+#define DP_PSR_SUPPORT                      0x070   /* XXX 1.2? */
 # define DP_PSR_IS_SUPPORTED                1
-#define DP_PSR_CAPS                         0x071
+#define DP_PSR_CAPS                         0x071   /* XXX 1.2? */
 # define DP_PSR_NO_TRAIN_ON_EXIT            1
 # define DP_PSR_SETUP_TIME_330              (0 << 1)
 # define DP_PSR_SETUP_TIME_275              (1 << 1)
@@ -93,11 +119,36 @@
 # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
 # define DP_PSR_SETUP_TIME_SHIFT            1
 
+/*
+ * 0x80-0x8f describe downstream port capabilities, but there are two layouts
+ * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it was not,
+ * each port's descriptor is one byte wide.  If it was set, each port's is
+ * four bytes wide, starting with the one byte from the base info.  As of
+ * DP interop v1.1a only VGA defines additional detail.
+ */
+
+/* offset 0 */
+#define DP_DOWNSTREAM_PORT_0		    0x80
+# define DP_DS_PORT_TYPE_MASK		    (7 << 0)
+# define DP_DS_PORT_TYPE_DP		    0
+# define DP_DS_PORT_TYPE_VGA		    1
+# define DP_DS_PORT_TYPE_DVI		    2
+# define DP_DS_PORT_TYPE_HDMI		    3
+# define DP_DS_PORT_TYPE_NON_EDID	    4
+# define DP_DS_PORT_HPD			    (1 << 3)
+/* offset 1 for VGA is maximum megapixels per second / 8 */
+/* offset 2 */
+# define DP_DS_VGA_MAX_BPC_MASK		    (3 << 0)
+# define DP_DS_VGA_8BPC			    0
+# define DP_DS_VGA_10BPC		    1
+# define DP_DS_VGA_12BPC		    2
+# define DP_DS_VGA_16BPC		    3
+
 /* link configuration */
 #define	DP_LINK_BW_SET		            0x100
 # define DP_LINK_BW_1_62		    0x06
 # define DP_LINK_BW_2_7			    0x0a
-# define DP_LINK_BW_5_4			    0x14
+# define DP_LINK_BW_5_4			    0x14    /* 1.2 */
 
 #define DP_LANE_COUNT_SET	            0x101
 # define DP_LANE_COUNT_MASK		    0x0f
@@ -107,7 +158,7 @@
 # define DP_TRAINING_PATTERN_DISABLE	    0
 # define DP_TRAINING_PATTERN_1		    1
 # define DP_TRAINING_PATTERN_2		    2
-# define DP_TRAINING_PATTERN_3		    3
+# define DP_TRAINING_PATTERN_3		    3	    /* 1.2 */
 # define DP_TRAINING_PATTERN_MASK	    0x3
 
 # define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
@@ -148,24 +199,38 @@
 
 #define DP_DOWNSPREAD_CTRL		    0x107
 # define DP_SPREAD_AMP_0_5		    (1 << 4)
+# define DP_MSA_TIMING_PAR_IGNORE_EN	    (1 << 7) /* eDP */
 
 #define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
 # define DP_SET_ANSI_8B10B		    (1 << 0)
 
-#define DP_PSR_EN_CFG			    0x170
+#define DP_I2C_SPEED_CONTROL_STATUS	    0x109   /* DPI */
+/* bitmask as for DP_I2C_SPEED_CAP */
+
+#define DP_EDP_CONFIGURATION_SET            0x10a   /* XXX 1.2? */
+
+#define DP_MSTM_CTRL			    0x111   /* 1.2 */
+# define DP_MST_EN			    (1 << 0)
+# define DP_UP_REQ_EN			    (1 << 1)
+# define DP_UPSTREAM_IS_SRC		    (1 << 2)
+
+#define DP_PSR_EN_CFG			    0x170   /* XXX 1.2? */
 # define DP_PSR_ENABLE			    (1 << 0)
 # define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
 # define DP_PSR_CRC_VERIFICATION	    (1 << 2)
 # define DP_PSR_FRAME_CAPTURE		    (1 << 3)
 
+#define DP_SINK_COUNT			    0x200
+/* prior to 1.2 bit 7 was reserved mbz */
+# define DP_GET_SINK_COUNT(x)		    ((((x) & 0x80) >> 1) | ((x) & 0x3f))
+# define DP_SINK_CP_READY		    (1 << 6)
+
 #define DP_DEVICE_SERVICE_IRQ_VECTOR	    0x201
 # define DP_REMOTE_CONTROL_COMMAND_PENDING  (1 << 0)
 # define DP_AUTOMATED_TEST_REQUEST	    (1 << 1)
 # define DP_CP_IRQ			    (1 << 2)
 # define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
 
-#define DP_EDP_CONFIGURATION_SET            0x10a
-
 #define DP_LANE0_1_STATUS		    0x202
 #define DP_LANE2_3_STATUS		    0x203
 # define DP_LANE_CR_DONE		    (1 << 0)
@@ -225,14 +290,14 @@
 # define DP_SET_POWER_D0                    0x1
 # define DP_SET_POWER_D3                    0x2
 
-#define DP_PSR_ERROR_STATUS                 0x2006
+#define DP_PSR_ERROR_STATUS                 0x2006  /* XXX 1.2? */
 # define DP_PSR_LINK_CRC_ERROR              (1 << 0)
 # define DP_PSR_RFB_STORAGE_ERROR           (1 << 1)
 
-#define DP_PSR_ESI                          0x2007
+#define DP_PSR_ESI                          0x2007  /* XXX 1.2? */
 # define DP_PSR_CAPS_CHANGE                 (1 << 0)
 
-#define DP_PSR_STATUS                       0x2008
+#define DP_PSR_STATUS                       0x2008  /* XXX 1.2? */
 # define DP_PSR_SINK_INACTIVE               0
 # define DP_PSR_SINK_ACTIVE_SRC_SYNCED      1
 # define DP_PSR_SINK_ACTIVE_RFB             2