Commit 1f56f4a2 authored by Gabe Black's avatar Gabe Black Committed by Jesse Barnes

PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers

This quirk will disable fast back to back transfer on the secondary bus
segment of the TI Bridge.
Signed-off-by: default avatarGabe Black <gabe.black@ni.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent e13cdbd7
...@@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) ...@@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
} }
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
/*
* TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
* Disable fast back-to-back on the secondary bus segment
*/
static void __devinit quirk_xio2000a(struct pci_dev *dev)
{
struct pci_dev *pdev;
u16 command;
dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
"secondary bus fast back-to-back transfers disabled\n");
list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
pci_read_config_word(pdev, PCI_COMMAND, &command);
if (command & PCI_COMMAND_FAST_BACK)
pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
quirk_xio2000a);
#ifdef CONFIG_X86_IO_APIC #ifdef CONFIG_X86_IO_APIC
......
...@@ -776,6 +776,7 @@ ...@@ -776,6 +776,7 @@
#define PCI_DEVICE_ID_TI_X515 0x8036 #define PCI_DEVICE_ID_TI_X515 0x8036
#define PCI_DEVICE_ID_TI_XX12 0x8039 #define PCI_DEVICE_ID_TI_XX12 0x8039
#define PCI_DEVICE_ID_TI_XX12_FM 0x803b #define PCI_DEVICE_ID_TI_XX12_FM 0x803b
#define PCI_DEVICE_ID_TI_XIO2000A 0x8231
#define PCI_DEVICE_ID_TI_1130 0xac12 #define PCI_DEVICE_ID_TI_1130 0xac12
#define PCI_DEVICE_ID_TI_1031 0xac13 #define PCI_DEVICE_ID_TI_1031 0xac13
#define PCI_DEVICE_ID_TI_1131 0xac15 #define PCI_DEVICE_ID_TI_1131 0xac15
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment