Commit 1f67df4d authored by Alex Deucher's avatar Alex Deucher

drm/radeon/dpm/evergreen: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent aafb3afa
......@@ -1802,6 +1802,7 @@ int cypress_dpm_enable(struct radeon_device *rdev)
struct rv7xx_power_info *pi = rv770_get_pi(rdev);
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
struct radeon_ps *boot_ps = rdev->pm.dpm.boot_ps;
int ret;
if (pi->gfx_clock_gating)
rv770_restore_cgcg(rdev);
......@@ -1811,16 +1812,23 @@ int cypress_dpm_enable(struct radeon_device *rdev)
if (pi->voltage_control) {
rv770_enable_voltage_control(rdev, true);
cypress_construct_voltage_tables(rdev);
ret = cypress_construct_voltage_tables(rdev);
if (ret)
return ret;
}
if (pi->mvdd_control)
cypress_get_mvdd_configuration(rdev);
if (pi->mvdd_control) {
ret = cypress_get_mvdd_configuration(rdev);
if (ret)
return ret;
}
if (eg_pi->dynamic_ac_timing) {
cypress_set_mc_reg_address_table(rdev);
cypress_force_mc_use_s0(rdev, boot_ps);
cypress_initialize_mc_reg_table(rdev);
ret = cypress_initialize_mc_reg_table(rdev);
if (ret)
eg_pi->dynamic_ac_timing = false;
cypress_force_mc_use_s1(rdev, boot_ps);
}
......@@ -1845,22 +1853,31 @@ int cypress_dpm_enable(struct radeon_device *rdev)
if (pi->dynamic_pcie_gen2)
cypress_enable_dynamic_pcie_gen2(rdev, true);
if (rv770_upload_firmware(rdev))
return -EINVAL;
ret = rv770_upload_firmware(rdev);
if (ret)
return ret;
cypress_get_table_locations(rdev);
ret = cypress_get_table_locations(rdev);
if (ret)
return ret;
if (cypress_init_smc_table(rdev, boot_ps))
return -EINVAL;
ret = cypress_init_smc_table(rdev, boot_ps);
if (ret)
return ret;
if (eg_pi->dynamic_ac_timing)
cypress_populate_mc_reg_table(rdev, boot_ps);
if (eg_pi->dynamic_ac_timing) {
ret = cypress_populate_mc_reg_table(rdev, boot_ps);
if (ret)
return ret;
}
cypress_program_response_times(rdev);
r7xx_start_smc(rdev);
cypress_notify_smc_display_change(rdev, false);
ret = cypress_notify_smc_display_change(rdev, false);
if (ret)
return ret;
cypress_enable_sclk_control(rdev, true);
......@@ -1879,7 +1896,9 @@ int cypress_dpm_enable(struct radeon_device *rdev)
r600_is_internal_thermal_sensor(rdev->pm.int_thermal_type)) {
PPSMC_Result result;
rv770_set_thermal_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
ret = rv770_set_thermal_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
if (ret)
return ret;
rdev->irq.dpm_thermal = true;
radeon_irq_set(rdev);
result = rv770_send_msg_to_smc(rdev, PPSMC_MSG_EnableThermalInterrupt);
......@@ -1938,29 +1957,45 @@ int cypress_dpm_set_power_state(struct radeon_device *rdev)
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
struct radeon_ps *new_ps = rdev->pm.dpm.requested_ps;
struct radeon_ps *old_ps = rdev->pm.dpm.current_ps;
int ret;
rv770_restrict_performance_levels_before_switch(rdev);
ret = rv770_restrict_performance_levels_before_switch(rdev);
if (ret)
return ret;
if (eg_pi->pcie_performance_request)
cypress_notify_link_speed_change_before_state_change(rdev, new_ps, old_ps);
rv770_set_uvd_clock_before_set_eng_clock(rdev, new_ps, old_ps);
rv770_halt_smc(rdev);
cypress_upload_sw_state(rdev, new_ps);
ret = rv770_halt_smc(rdev);
if (ret)
return ret;
ret = cypress_upload_sw_state(rdev, new_ps);
if (ret)
return ret;
if (eg_pi->dynamic_ac_timing)
cypress_upload_mc_reg_table(rdev, new_ps);
if (eg_pi->dynamic_ac_timing) {
ret = cypress_upload_mc_reg_table(rdev, new_ps);
if (ret)
return ret;
}
cypress_program_memory_timing_parameters(rdev, new_ps);
rv770_resume_smc(rdev);
rv770_set_sw_state(rdev);
ret = rv770_resume_smc(rdev);
if (ret)
return ret;
ret = rv770_set_sw_state(rdev);
if (ret)
return ret;
rv770_set_uvd_clock_after_set_eng_clock(rdev, new_ps, old_ps);
if (eg_pi->pcie_performance_request)
cypress_notify_link_speed_change_after_state_change(rdev, new_ps, old_ps);
rv770_unrestrict_performance_levels_after_switch(rdev);
ret = rv770_unrestrict_performance_levels_after_switch(rdev);
if (ret)
return ret;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment