Commit 1f80ba3d authored by Paul Mackerras's avatar Paul Mackerras

KVM: PPC: Book3S HV: Fix XICS-on-XIVE H_IPI when priority = 0

This fixes a bug in the XICS emulation on POWER9 machines which is
triggered by the guest doing a H_IPI with priority = 0 (the highest
priority).  What happens is that the notification interrupt arrives
at the destination at priority zero.  The loop in scan_interrupts()
sees that a priority 0 interrupt is pending, but because xc->mfrr is
zero, we break out of the loop before taking the notification
interrupt out of the queue and EOI-ing it.  (This doesn't happen
when xc->mfrr != 0; in that case we process the priority-0 notification
interrupt on the first iteration of the loop, and then break out of
a subsequent iteration of the loop with hirq == XICS_IPI.)

To fix this, we move the prio >= xc->mfrr check down to near the end
of the loop.  However, there are then some other things that need to
be adjusted.  Since we are potentially handling the notification
interrupt and also delivering an IPI to the guest in the same loop
iteration, we need to update pending and handle any q->pending_count
value before the xc->mfrr check, rather than at the end of the loop.
Also, we need to update the queue pointers when we have processed and
EOI-ed the notification interrupt, since we may not do it later.
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
parent 6fabc9f2
......@@ -130,24 +130,14 @@ static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc,
*/
prio = ffs(pending) - 1;
/*
* If the most favoured prio we found pending is less
* favored (or equal) than a pending IPI, we return
* the IPI instead.
*
* Note: If pending was 0 and mfrr is 0xff, we will
* not spurriously take an IPI because mfrr cannot
* then be smaller than cppr.
*/
if (prio >= xc->mfrr && xc->mfrr < xc->cppr) {
/* Don't scan past the guest cppr */
if (prio >= xc->cppr || prio > 7) {
if (xc->mfrr < xc->cppr) {
prio = xc->mfrr;
hirq = XICS_IPI;
break;
}
/* Don't scan past the guest cppr */
if (prio >= xc->cppr || prio > 7)
break;
}
/* Grab queue and pointers */
q = &xc->queues[prio];
......@@ -184,9 +174,12 @@ static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc,
* been set and another occurrence of the IPI will trigger.
*/
if (hirq == XICS_IPI || (prio == 0 && !qpage)) {
if (scan_type == scan_fetch)
if (scan_type == scan_fetch) {
GLUE(X_PFX,source_eoi)(xc->vp_ipi,
&xc->vp_ipi_data);
q->idx = idx;
q->toggle = toggle;
}
/* Loop back on same queue with updated idx/toggle */
#ifdef XIVE_RUNTIME_CHECKS
WARN_ON(hirq && hirq != XICS_IPI);
......@@ -199,17 +192,8 @@ static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc,
if (hirq == XICS_DUMMY)
goto skip_ipi;
/* If fetching, update queue pointers */
if (scan_type == scan_fetch) {
q->idx = idx;
q->toggle = toggle;
}
/* Something found, stop searching */
if (hirq)
break;
/* Clear the pending bit on the now empty queue */
/* Clear the pending bit if the queue is now empty */
if (!hirq) {
pending &= ~(1 << prio);
/*
......@@ -227,6 +211,24 @@ static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc,
}
}
/*
* If the most favoured prio we found pending is less
* favored (or equal) than a pending IPI, we return
* the IPI instead.
*/
if (prio >= xc->mfrr && xc->mfrr < xc->cppr) {
prio = xc->mfrr;
hirq = XICS_IPI;
break;
}
/* If fetching, update queue pointers */
if (scan_type == scan_fetch) {
q->idx = idx;
q->toggle = toggle;
}
}
/* If we are just taking a "peek", do nothing else */
if (scan_type == scan_poll)
return hirq;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment