scsi: mpt3sas: Convert logging uses with MPT3SAS_FMT without logging levels

Convert these uses to ioc_<level> where appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpt3sas/mpt3sas_base.c

@@ -2819,9 +2819,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 	ioc->reply_queue_count = min_t(int, ioc->cpu_count,
 		ioc->msix_vector_count);
 
-	printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores"
-	  ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
-	  ioc->cpu_count, max_msix_vectors);
+	ioc_info(ioc, "MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n",
+		 ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors);
 
 	if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
 		local_max_msix_vectors = (reset_devices) ? 1 : 8;
@@ -2886,8 +2885,7 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
 {
 	struct pci_dev *pdev = ioc->pdev;
 
-	dexitprintk(ioc, printk(MPT3SAS_FMT "%s\n",
-		ioc->name, __func__));
+	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
 	_base_free_irq(ioc);
 	_base_disable_msix(ioc);
@@ -3007,9 +3005,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 		     ioc->combined_reply_index_count,
 		     sizeof(resource_size_t *), GFP_KERNEL);
 		if (!ioc->replyPostRegisterIndex) {
-			dfailprintk(ioc, printk(MPT3SAS_FMT
-			"allocation for reply Post Register Index failed!!!\n",
-								   ioc->name));
+			dfailprintk(ioc,
+				    ioc_warn(ioc, "allocation for reply Post Register Index failed!!!\n"));
 			r = -ENOMEM;
 			goto out_fail;
 		}
@@ -5438,26 +5435,26 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 	u32 ioc_state;
 	int rc;
 
-	dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
-	    __func__));
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
 	if (ioc->pci_error_recovery) {
-		dfailprintk(ioc, printk(MPT3SAS_FMT
-		    "%s: host in pci error recovery\n", ioc->name, __func__));
+		dfailprintk(ioc,
+			    ioc_info(ioc, "%s: host in pci error recovery\n",
+				     __func__));
 		return -EFAULT;
 	}
 
 	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
-	dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
-	    ioc->name, __func__, ioc_state));
+	dhsprintk(ioc,
+		  ioc_info(ioc, "%s: ioc_state(0x%08x)\n",
+			   __func__, ioc_state));
 
 	if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
 	    (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
 		return 0;
 
 	if (ioc_state & MPI2_DOORBELL_USED) {
-		dhsprintk(ioc, printk(MPT3SAS_FMT
-		    "unexpected doorbell active!\n", ioc->name));
+		dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
 		goto issue_diag_reset;
 	}
 
@@ -5469,9 +5466,9 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 
 	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
 	if (ioc_state) {
-		dfailprintk(ioc, printk(MPT3SAS_FMT
-		    "%s: failed going to ready state (ioc_state=0x%x)\n",
-		    ioc->name, __func__, ioc_state));
+		dfailprintk(ioc,
+			    ioc_info(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
+				     __func__, ioc_state));
 		return -EFAULT;
 	}
 
@@ -5498,9 +5495,9 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
 
 	r = _base_wait_for_iocstate(ioc, 10);
 	if (r) {
-		dfailprintk(ioc, printk(MPT3SAS_FMT
-		    "%s: failed getting to correct state\n",
-		    ioc->name, __func__));
+		dfailprintk(ioc,
+			    ioc_info(ioc, "%s: failed getting to correct state\n",
+				     __func__));
 		return r;
 	}
 	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);

drivers/scsi/mpt3sas/mpt3sas_scsih.c

@@ -4999,15 +4999,15 @@ _scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER *ioc,
 	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
 	if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
 		&mpi_request)) != 0) {
-		printk(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
 			__FILE__, __LINE__, __func__);
 		return;
 	}
 
 	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
-		dewtprintk(ioc, printk(MPT3SAS_FMT
-		 "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
-		 ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
+		dewtprintk(ioc,
+			   ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
+				    le16_to_cpu(mpi_reply.IOCStatus),
 				    le32_to_cpu(mpi_reply.IOCLogInfo)));
 		return;
 	}

drivers/scsi/mpt3sas/mpt3sas_transport.c

@@ -717,9 +717,9 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 		sas_device = mpt3sas_get_sdev_by_addr(ioc,
 				    mpt3sas_port->remote_identify.sas_address);
 		if (!sas_device) {
-			dfailprintk(ioc, printk(MPT3SAS_FMT
-				"failure at %s:%d/%s()!\n",
-				ioc->name, __FILE__, __LINE__, __func__));
+			dfailprintk(ioc,
+				    ioc_info(ioc, "failure at %s:%d/%s()!\n",
+					     __FILE__, __LINE__, __func__));
 			goto out_fail;
 		}
 		sas_device->pend_sas_rphy_add = 1;