ARM: at91: DT: add Calao USB A9263 board support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/usb_a9263.dts

+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 0>;
+				status = "okay";
+			};
+
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};

arch/arm/mach-at91/Makefile.boot

@@ -19,6 +19,7 @@ dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
 # sam9263
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
 # sam9g20
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb