Skip to content

L
linux
Commit 2023d18e authored by Mark Hounschell's avatar Mark Hounschell Committed by Greg Kroah-Hartman
Browse files
Options

staging: dgap: remove uchar typedef and replace use with u8 

This patch removes the uchar typedef in dgap.h
and changes all uses of it to u8.
Signed-off-by: default avatarMark Hounschell <markh@compro.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c9a12996
Hide whitespace changes
Inline Side-by-side
Showing with 81 additions and 84 deletions
drivers/staging/dgap/dgap.c
View file @ 2023d18e
......@@ -135,9 +135,9 @@ static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds);
static int dgap_event(struct board_t *bd);
static void dgap_poll_tasklet(unsigned long data);
static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1,
uchar byte2, uint ncmds);
static void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds);
static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
u8 byte2, uint ncmds);
static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds);
static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt);
static int dgap_param(struct tty_struct *tty);
static void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf,
......@@ -184,10 +184,10 @@ static uint dgap_config_get_useintr(struct board_t *bd);
static uint dgap_config_get_altpin(struct board_t *bd);
static int dgap_ms_sleep(ulong ms);
static void dgap_do_bios_load(struct board_t *brd, const uchar *ubios, int len);
static void dgap_do_fep_load(struct board_t *brd, const uchar *ufep, int len);
static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len);
static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len);
#ifdef DIGI_CONCENTRATORS_SUPPORTED
static void dgap_do_conc_load(struct board_t *brd, uchar *uaddr, int len);
static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len);
#endif
static int dgap_after_config_loaded(int board);
static int dgap_finalize_board_init(struct board_t *brd);
......@@ -275,7 +275,7 @@ MODULE_DEVICE_TABLE(pci, dgap_pci_tbl);
*/
struct board_id {
uint config_type;
uchar *name;
u8 *name;
uint maxports;
uint dpatype;
};
......@@ -307,10 +307,10 @@ static struct pci_driver dgap_driver = {
};
struct firmware_info {
uchar *conf_name; /* dgap.conf */
uchar *bios_name; /* BIOS filename */
uchar *fep_name; /* FEP filename */
uchar *con_name; /* Concentrator filename FIXME*/
u8 *conf_name; /* dgap.conf */
u8 *bios_name; /* BIOS filename */
u8 *fep_name; /* FEP filename */
u8 *con_name; /* Concentrator filename FIXME*/
int num; /* sequence number */
};
......@@ -1293,8 +1293,8 @@ static int dgap_tty_init(struct board_t *brd)
int i;
int tlw;
uint true_count = 0;
uchar *vaddr;
uchar modem = 0;
u8 *vaddr;
u8 modem = 0;
struct channel_t *ch;
struct bs_t *bs;
struct cm_t *cm;
......@@ -1505,8 +1505,8 @@ static void dgap_tty_uninit(struct board_t *brd)
* dgap_sniff - Dump data out to the "sniff" buffer if the
* proc sniff file is opened...
*/
static void dgap_sniff_nowait_nolock(struct channel_t *ch, uchar *text,
uchar *buf, int len)
static void dgap_sniff_nowait_nolock(struct channel_t *ch, u8 *text,
u8 *buf, int len)
{
struct timeval tv;
int n;
......@@ -1640,8 +1640,8 @@ static void dgap_input(struct channel_t *ch)
int flip_len;
int len = 0;
int n = 0;
uchar *buf;
uchar tmpchar;
u8 *buf;
u8 tmpchar;
int s = 0;
if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
......@@ -2410,7 +2410,7 @@ static int dgap_tty_chars_in_buffer(struct tty_struct *tty)
struct channel_t *ch = NULL;
struct un_t *un = NULL;
struct bs_t *bs = NULL;
uchar tbusy;
u8 tbusy;
uint chars = 0;
u16 thead, ttail, tmask, chead, ctail;
ulong lock_flags = 0;
......@@ -2843,8 +2843,8 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf,
n -= remain;
vaddr = ch->ch_taddr + head;
memcpy_toio(vaddr, (uchar *) buf, remain);
dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf,
memcpy_toio(vaddr, (u8 *) buf, remain);
dgap_sniff_nowait_nolock(ch, "USER WRITE", (u8 *) buf,
remain);
head = ch->ch_tstart;
......@@ -2859,8 +2859,8 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf,
vaddr = ch->ch_taddr + head;
remain = n;
memcpy_toio(vaddr, (uchar *) buf, remain);
dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *)buf,
memcpy_toio(vaddr, (u8 *) buf, remain);
dgap_sniff_nowait_nolock(ch, "USER WRITE", (u8 *)buf,
remain);
head += remain;
......@@ -2915,7 +2915,7 @@ static int dgap_tty_tiocmget(struct tty_struct *tty)
struct channel_t *ch;
struct un_t *un;
int result = -EIO;
uchar mstat = 0;
u8 mstat = 0;
ulong lock_flags;
if (!tty || tty->magic != TTY_MAGIC)
......@@ -3141,7 +3141,7 @@ static void dgap_tty_send_xchar(struct tty_struct *tty, char c)
static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value)
{
int result = 0;
uchar mstat = 0;
u8 mstat = 0;
ulong lock_flags;
int rc = 0;
......@@ -4301,9 +4301,9 @@ static int dgap_tty_register_ports(struct board_t *brd)
* Copies the BIOS code from the user to the board,
* and starts the BIOS running.
*/
static void dgap_do_bios_load(struct board_t *brd, const uchar *ubios, int len)
static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len)
{
uchar *addr;
u8 *addr;
uint offset;
int i;
......@@ -4336,7 +4336,7 @@ static void dgap_do_bios_load(struct board_t *brd, const uchar *ubios, int len)
*/
static int dgap_test_bios(struct board_t *brd)
{
uchar *addr;
u8 *addr;
u16 word;
u16 err1;
u16 err2;
......@@ -4377,9 +4377,9 @@ static int dgap_test_bios(struct board_t *brd)
* Copies the FEP code from the user to the board,
* and starts the FEP running.
*/
static void dgap_do_fep_load(struct board_t *brd, const uchar *ufep, int len)
static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len)
{
uchar *addr;
u8 *addr;
uint offset;
if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
......@@ -4398,8 +4398,8 @@ static void dgap_do_fep_load(struct board_t *brd, const uchar *ufep, int len)
* it its config string describing how the concentrators look.
*/
if ((brd->type == PCX) || (brd->type == PEPC)) {
uchar string[100];
uchar *config, *xconfig;
u8 string[100];
u8 *config, *xconfig;
int i = 0;
xconfig = dgap_create_config_string(brd, string);
......@@ -4423,7 +4423,7 @@ static void dgap_do_fep_load(struct board_t *brd, const uchar *ufep, int len)
*/
static int dgap_test_fep(struct board_t *brd)
{
uchar *addr;
u8 *addr;
u16 word;
u16 err1;
u16 err2;
......@@ -4472,7 +4472,7 @@ static int dgap_test_fep(struct board_t *brd)
*/
static void dgap_do_reset_board(struct board_t *brd)
{
uchar check;
u8 check;
u32 check1;
u32 check2;
int i = 0;
......@@ -4520,7 +4520,7 @@ static void dgap_do_reset_board(struct board_t *brd)
/*
* Sends a concentrator image into the FEP5 board.
*/
static void dgap_do_conc_load(struct board_t *brd, uchar *uaddr, int len)
static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len)
{
char *vaddr;
u16 offset = 0;
......@@ -4553,8 +4553,8 @@ static void dgap_get_vpd(struct board_t *brd)
u16 vpd_offset;
u16 image_length;
u16 i;
uchar byte1;
uchar byte2;
u8 byte1;
u8 byte2;
/*
* Poke the magic number at the PCI Rom Address location.
......@@ -4733,8 +4733,8 @@ static void dgap_poll_tasklet(unsigned long data)
* in the cmd buffer before returning.
*
*=======================================================================*/
static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1,
uchar byte2, uint ncmds)
static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
u8 byte2, uint ncmds)
{
char *vaddr = NULL;
struct cm_t *cm_addr = NULL;
......@@ -4776,7 +4776,7 @@ static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1,
* Put the data in the circular command buffer.
*/
writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
writeb((u8) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
writeb(byte1, (char *) (vaddr + head + CMDSTART + 2));
writeb(byte2, (char *) (vaddr + head + CMDSTART + 3));
......@@ -4819,7 +4819,7 @@ static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1,
* in the cmd buffer before returning.
*
*=======================================================================*/
static void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds)
static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds)
{
char *vaddr = NULL;
struct cm_t *cm_addr = NULL;
......@@ -4860,7 +4860,7 @@ static void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds)
* Put the data in the circular command buffer.
*/
writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
writeb((u8) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
writew((u16) word, (char *) (vaddr + head + CMDSTART + 2));
head = (head + 4) & (CMDMAX - CMDSTART - 4);
......@@ -4944,9 +4944,9 @@ static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds)
*/
/* Write an FF to tell the FEP that we want an extended command */
writeb((uchar) 0xff, (char *) (vaddr + head + CMDSTART + 0));
writeb((u8) 0xff, (char *) (vaddr + head + CMDSTART + 0));
writeb((uchar) ch->ch_portnum, (uchar *) (vaddr + head + CMDSTART + 1));
writeb((u8) ch->ch_portnum, (u8 *) (vaddr + head + CMDSTART + 1));
writew((u16) cmd, (char *) (vaddr + head + CMDSTART + 2));
/*
......@@ -5051,7 +5051,7 @@ static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt)
*/
static uint dgap_get_custom_baud(struct channel_t *ch)
{
uchar *vaddr;
u8 *vaddr;
ulong offset = 0;
uint value = 0;
......@@ -5123,8 +5123,8 @@ static int dgap_param(struct tty_struct *tty)
u16 head;
u16 cflag;
u16 iflag;
uchar mval;
uchar hflow;
u8 mval;
u8 hflow;
if (!tty || tty->magic != TTY_MAGIC)
return -ENXIO;
......@@ -5390,7 +5390,7 @@ static int dgap_param(struct tty_struct *tty)
ch->ch_hflow = hflow;
/* Okay to have channel and board locks held calling this */
dgap_cmdb(ch, SHFLOW, (uchar) hflow, 0xff, 0);
dgap_cmdb(ch, SHFLOW, (u8) hflow, 0xff, 0);
}
......@@ -5418,7 +5418,7 @@ static int dgap_param(struct tty_struct *tty)
ch->ch_mostat = mval;
/* Okay to have channel and board locks held calling this */
dgap_cmdb(ch, SMODEM, (uchar) mval, D_RTS(ch)|D_DTR(ch), 0);
dgap_cmdb(ch, SMODEM, (u8) mval, D_RTS(ch)|D_DTR(ch), 0);
}
/*
......@@ -5572,8 +5572,8 @@ static int dgap_event(struct board_t *bd)
ulong lock_flags;
ulong lock_flags2;
struct bs_t *bs;
uchar *event;
uchar *vaddr = NULL;
u8 *event;
u8 *vaddr = NULL;
struct ev_t *eaddr = NULL;
uint head;
uint tail;
......
drivers/staging/dgap/dgap.h
View file @ 2023d18e
......@@ -39,9 +39,6 @@
# define FALSE 0
#endif
/* Required for our shared headers! */
typedef unsigned char uchar;
#if !defined(TTY_FLIPBUF_SIZE)
# define TTY_FLIPBUF_SIZE 512
#endif
......@@ -541,11 +538,11 @@ struct board_t {
u16 device; /* PCI device ID */
u16 subvendor; /* PCI subsystem vendor ID */
u16 subdevice; /* PCI subsystem device ID */
uchar rev; /* PCI revision ID */
u8 rev; /* PCI revision ID */
uint pci_bus; /* PCI bus value */
uint pci_slot; /* PCI slot value */
u16 maxports; /* MAX ports this board can handle */
uchar vpd[VPDSIZE]; /* VPD of board, if found */
u8 vpd[VPDSIZE]; /* VPD of board, if found */
u32 bd_flags; /* Board flags */
spinlock_t bd_lock; /* Used to protect board */
......@@ -574,11 +571,11 @@ struct board_t {
ulong membase; /* Start of base memory of the card */
ulong membase_end; /* End of base memory of the card */
uchar *re_map_port; /* Remapped io port of the card */
uchar *re_map_membase;/* Remapped memory of the card */
u8 *re_map_port; /* Remapped io port of the card */
u8 *re_map_membase;/* Remapped memory of the card */
uchar runwait; /* # Processes waiting for FEP */
uchar inhibit_poller; /* Tells the poller to leave us alone */
u8 runwait; /* # Processes waiting for FEP */
u8 inhibit_poller; /* Tells the poller to leave us alone */
struct channel_t *channels[MAXPORTS]; /* array of pointers to our */
/* channels. */
......@@ -985,7 +982,7 @@ struct channel_t {
wait_queue_head_t ch_flags_wait;
u32 pscan_state;
uchar pscan_savechar;
u8 pscan_savechar;
u32 ch_portnum; /* Port number, 0 offset. */
u32 ch_open_count; /* open count */
......@@ -1015,27 +1012,27 @@ struct channel_t {
u16 ch_cook; /* Output character mask */
uchar ch_card; /* Card channel is on */
uchar ch_stopc; /* Stop character */
uchar ch_startc; /* Start character */
uchar ch_mostat; /* FEP output modem status */
uchar ch_mistat; /* FEP input modem status */
uchar ch_mforce; /* Modem values to be forced */
uchar ch_mval; /* Force values */
uchar ch_fepstopc; /* FEP stop character */
uchar ch_fepstartc; /* FEP start character */
uchar ch_astopc; /* Auxiliary Stop character */
uchar ch_astartc; /* Auxiliary Start character */
uchar ch_fepastopc; /* Auxiliary FEP stop char */
uchar ch_fepastartc; /* Auxiliary FEP start char */
uchar ch_hflow; /* FEP hardware handshake */
uchar ch_dsr; /* stores real dsr value */
uchar ch_cd; /* stores real cd value */
uchar ch_tx_win; /* channel tx buffer window */
uchar ch_rx_win; /* channel rx buffer window */
u8 ch_card; /* Card channel is on */
u8 ch_stopc; /* Stop character */
u8 ch_startc; /* Start character */
u8 ch_mostat; /* FEP output modem status */
u8 ch_mistat; /* FEP input modem status */
u8 ch_mforce; /* Modem values to be forced */
u8 ch_mval; /* Force values */
u8 ch_fepstopc; /* FEP stop character */
u8 ch_fepstartc; /* FEP start character */
u8 ch_astopc; /* Auxiliary Stop character */
u8 ch_astartc; /* Auxiliary Start character */
u8 ch_fepastopc; /* Auxiliary FEP stop char */
u8 ch_fepastartc; /* Auxiliary FEP start char */
u8 ch_hflow; /* FEP hardware handshake */
u8 ch_dsr; /* stores real dsr value */
u8 ch_cd; /* stores real cd value */
u8 ch_tx_win; /* channel tx buffer window */
u8 ch_rx_win; /* channel rx buffer window */
uint ch_custom_speed; /* Custom baud, if set */
uint ch_baud_info; /* Current baud info for /proc output */
ulong ch_rxcount; /* total of data received so far */
......@@ -1076,14 +1073,14 @@ struct ev_t {
* Download buffer structure.
************************************************************************/
struct downld_t {
uchar dl_type; /* Header */
uchar dl_seq; /* Download sequence */
u8 dl_type; /* Header */
u8 dl_seq; /* Download sequence */
ushort dl_srev; /* Software revision number */
ushort dl_lrev; /* Low revision number */
ushort dl_hrev; /* High revision number */
ushort dl_seg; /* Start segment address */
ushort dl_size; /* Number of bytes to download */
uchar dl_data[1024]; /* Download data */
u8 dl_data[1024]; /* Download data */
};
/************************************************************************
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7