Commit 20d5c84b authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8978' and...

Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8978' and 'asoc/topic/zte-tdm' into asoc-next
ZTE TDM DAI driver
Required properties:
- compatible : should be one of the following.
* zte,zx296718-tdm
- reg : physical base address of the controller and length of memory mapped
region.
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
- clock-names: "wclk" for the wclk.
"pclk" for the pclk.
-#clock-cells: should be 1.
- zte,tdm-dma-sysctrl : Reference to the sysctrl controller controlling
the dma. includes:
phandle of sysctrl.
register offset in sysctrl for control dma.
mask of the register that be written to sysctrl.
Example:
tdm: tdm@1487000 {
compatible = "zte,zx296718-tdm";
reg = <0x01487000 0x1000>;
clocks = <&audiocrm AUDIO_TDM_WCLK>, <&audiocrm AUDIO_TDM_PCLK>;
clock-names = "wclk", "pclk";
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&tdm_global_pin>;
zte,tdm-dma-sysctrl = <&sysctrl 0x10c 4>;
};
...@@ -604,12 +604,150 @@ static const int bclk_divs[] = { ...@@ -604,12 +604,150 @@ static const int bclk_divs[] = {
120, 160, 220, 240, 320, 320, 320 120, 160, 220, 240, 320, 320, 320
}; };
/**
* wm8960_configure_sysclk - checks if there is a sysclk frequency available
* The sysclk must be chosen such that:
* - sysclk = MCLK / sysclk_divs
* - lrclk = sysclk / dac_divs
* - 10 * bclk = sysclk / bclk_divs
*
* If we cannot find an exact match for (sysclk, lrclk, bclk)
* triplet, we relax the bclk such that bclk is chosen as the
* closest available frequency greater than expected bclk.
*
* @wm8960_priv: wm8960 codec private data
* @mclk: MCLK used to derive sysclk
* @sysclk_idx: sysclk_divs index for found sysclk
* @dac_idx: dac_divs index for found lrclk
* @bclk_idx: bclk_divs index for found bclk
*
* Returns:
* -1, in case no sysclk frequency available found
* >=0, in case we could derive bclk and lrclk from sysclk using
* (@sysclk_idx, @dac_idx, @bclk_idx) dividers
*/
static
int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
int *sysclk_idx, int *dac_idx, int *bclk_idx)
{
int sysclk, bclk, lrclk;
int i, j, k;
int diff, closest = mclk;
/* marker for no match */
*bclk_idx = -1;
bclk = wm8960->bclk;
lrclk = wm8960->lrclk;
/* check if the sysclk frequency is available. */
for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
if (sysclk_divs[i] == -1)
continue;
sysclk = mclk / sysclk_divs[i];
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
if (sysclk != dac_divs[j] * lrclk)
continue;
for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
diff = sysclk - bclk * bclk_divs[k] / 10;
if (diff == 0) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
break;
}
if (diff > 0 && closest > diff) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
closest = diff;
}
}
if (k != ARRAY_SIZE(bclk_divs))
break;
}
if (j != ARRAY_SIZE(dac_divs))
break;
}
return *bclk_idx;
}
/**
* wm8960_configure_pll - checks if there is a PLL out frequency available
* The PLL out frequency must be chosen such that:
* - sysclk = lrclk * dac_divs
* - freq_out = sysclk * sysclk_divs
* - 10 * sysclk = bclk * bclk_divs
*
* If we cannot find an exact match for (sysclk, lrclk, bclk)
* triplet, we relax the bclk such that bclk is chosen as the
* closest available frequency greater than expected bclk.
*
* @codec: codec structure
* @freq_in: input frequency used to derive freq out via PLL
* @sysclk_idx: sysclk_divs index for found sysclk
* @dac_idx: dac_divs index for found lrclk
* @bclk_idx: bclk_divs index for found bclk
*
* Returns:
* < 0, in case no PLL frequency out available was found
* >=0, in case we could derive bclk, lrclk, sysclk from PLL out using
* (@sysclk_idx, @dac_idx, @bclk_idx) dividers
*/
static
int wm8960_configure_pll(struct snd_soc_codec *codec, int freq_in,
int *sysclk_idx, int *dac_idx, int *bclk_idx)
{
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
int sysclk, bclk, lrclk, freq_out;
int diff, closest, best_freq_out;
int i, j, k;
bclk = wm8960->bclk;
lrclk = wm8960->lrclk;
closest = freq_in;
best_freq_out = -EINVAL;
*sysclk_idx = *dac_idx = *bclk_idx = -1;
for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
if (sysclk_divs[i] == -1)
continue;
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
sysclk = lrclk * dac_divs[j];
freq_out = sysclk * sysclk_divs[i];
for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
if (!is_pll_freq_available(freq_in, freq_out))
continue;
diff = sysclk - bclk * bclk_divs[k] / 10;
if (diff == 0) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
return freq_out;
}
if (diff > 0 && closest > diff) {
*sysclk_idx = i;
*dac_idx = j;
*bclk_idx = k;
closest = diff;
best_freq_out = freq_out;
}
}
}
}
return best_freq_out;
}
static int wm8960_configure_clocking(struct snd_soc_codec *codec) static int wm8960_configure_clocking(struct snd_soc_codec *codec)
{ {
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
int sysclk, bclk, lrclk, freq_out, freq_in; int freq_out, freq_in;
u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); u16 iface1 = snd_soc_read(codec, WM8960_IFACE1);
int i, j, k; int i, j, k;
int ret;
if (!(iface1 & (1<<6))) { if (!(iface1 & (1<<6))) {
dev_dbg(codec->dev, dev_dbg(codec->dev,
...@@ -623,8 +761,6 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec) ...@@ -623,8 +761,6 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
} }
freq_in = wm8960->freq_in; freq_in = wm8960->freq_in;
bclk = wm8960->bclk;
lrclk = wm8960->lrclk;
/* /*
* If it's sysclk auto mode, check if the MCLK can provide sysclk or * If it's sysclk auto mode, check if the MCLK can provide sysclk or
* not. If MCLK can provide sysclk, using MCLK to provide sysclk * not. If MCLK can provide sysclk, using MCLK to provide sysclk
...@@ -643,60 +779,21 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec) ...@@ -643,60 +779,21 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
} }
if (wm8960->clk_id != WM8960_SYSCLK_PLL) { if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
/* check if the sysclk frequency is available. */ ret = wm8960_configure_sysclk(wm8960, freq_out, &i, &j, &k);
for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { if (ret >= 0) {
if (sysclk_divs[i] == -1)
continue;
sysclk = freq_out / sysclk_divs[i];
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
if (sysclk != dac_divs[j] * lrclk)
continue;
for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
if (sysclk == bclk * bclk_divs[k] / 10)
break;
if (k != ARRAY_SIZE(bclk_divs))
break;
}
if (j != ARRAY_SIZE(dac_divs))
break;
}
if (i != ARRAY_SIZE(sysclk_divs)) {
goto configure_clock; goto configure_clock;
} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
dev_err(codec->dev, "failed to configure clock\n"); dev_err(codec->dev, "failed to configure clock\n");
return -EINVAL; return -EINVAL;
} }
} }
/* get a available pll out frequency and set pll */
for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
if (sysclk_divs[i] == -1)
continue;
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
sysclk = lrclk * dac_divs[j];
freq_out = sysclk * sysclk_divs[i];
for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
if (sysclk == bclk * bclk_divs[k] / 10 &&
is_pll_freq_available(freq_in, freq_out)) {
wm8960_set_pll(codec,
freq_in, freq_out);
break;
} else {
continue;
}
}
if (k != ARRAY_SIZE(bclk_divs))
break;
}
if (j != ARRAY_SIZE(dac_divs))
break;
}
if (i == ARRAY_SIZE(sysclk_divs)) { freq_out = wm8960_configure_pll(codec, freq_in, &i, &j, &k);
dev_err(codec->dev, "failed to configure clock\n"); if (freq_out < 0) {
return -EINVAL; dev_err(codec->dev, "failed to configure clock via PLL\n");
return freq_out;
} }
wm8960_set_pll(codec, freq_in, freq_out);
configure_clock: configure_clock:
/* configure sysclk clock */ /* configure sysclk clock */
......
...@@ -1071,9 +1071,16 @@ static const struct i2c_device_id wm8978_i2c_id[] = { ...@@ -1071,9 +1071,16 @@ static const struct i2c_device_id wm8978_i2c_id[] = {
}; };
MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id); MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id);
static const struct of_device_id wm8978_of_match[] = {
{ .compatible = "wlf,wm8978", },
{ }
};
MODULE_DEVICE_TABLE(of, wm8978_of_match);
static struct i2c_driver wm8978_i2c_driver = { static struct i2c_driver wm8978_i2c_driver = {
.driver = { .driver = {
.name = "wm8978", .name = "wm8978",
.of_match_table = wm8978_of_match,
}, },
.probe = wm8978_i2c_probe, .probe = wm8978_i2c_probe,
.remove = wm8978_i2c_remove, .remove = wm8978_i2c_remove,
......
...@@ -15,3 +15,11 @@ config ZX_I2S ...@@ -15,3 +15,11 @@ config ZX_I2S
help help
Say Y or M if you want to add support for codecs attached to the Say Y or M if you want to add support for codecs attached to the
ZTE ZX I2S interface ZTE ZX I2S interface
config ZX_TDM
tristate "ZTE ZX TDM Driver Support"
depends on COMMON_CLK
select SND_SOC_GENERIC_DMAENGINE_PCM
help
Say Y or M if you want to add support for codecs attached to the
ZTE ZX TDM interface
obj-$(CONFIG_ZX_SPDIF) += zx-spdif.o obj-$(CONFIG_ZX_SPDIF) += zx-spdif.o
obj-$(CONFIG_ZX_I2S) += zx-i2s.o obj-$(CONFIG_ZX_I2S) += zx-i2s.o
obj-$(CONFIG_ZX_TDM) += zx-tdm.o
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment