Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68k updates from Greg Ungerer:
 "The bulk of the changes are to support the ColdFire 5441x SoC family
  with their MMU enabled. The parts have been supported for a long time
  now, but only in no-MMU mode.

  Angelo Dureghello has a new board with a 5441x and we have ironed out
  the last problems with MMU enabled on it. So there is also some
  changes to properly support that board too.

  Also a fix for a link problem when selecting the traditional 68k beep
  device in no-MMU configurations"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: add Sysam stmark2 open board support
  m68k: coldfire: add dspi0 module support
  m68k: pull mach_beep in setup.c
  m68k: allow ColdFire m5441x parts to run with MMU enabled
  m68k: fix ColdFire node shift size calculation
  m68k: move coldfire MMU initialization code

arch/m68k/Kconfig.cpu

@@ -284,7 +284,7 @@ config M548x
 
 config M5441x
 	bool "MCF5441x"
-	depends on !MMU
+	select MMU_COLDFIRE if MMU
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CACHE_CB
 	help

arch/m68k/Kconfig.machine

@@ -266,6 +266,12 @@ config AMCORE
 	help
 	  Support for the Sysam AMCORE open-hardware generic board.
 
+config STMARK2
+        bool "Sysam stmark2 board support"
+        depends on M5441x
+        help
+          Support for the Sysam stmark2 open-hardware generic board.
+
 config FIREBEE
 	bool "FireBee board support"
 	depends on M547x

arch/m68k/coldfire/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_CLEOPATRA)	+= nettel.o
 obj-$(CONFIG_FIREBEE)	+= firebee.o
 obj-$(CONFIG_MCF8390)	+= mcf8390.o
 obj-$(CONFIG_AMCORE)	+= amcore.o
+obj-$(CONFIG_STMARK2)	+= stmark2.o
 
 obj-$(CONFIG_PCI)	+= pci.o
 

arch/m68k/coldfire/m5441x.c

@@ -27,7 +27,7 @@ DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
 DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
 DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
 DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
-DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "fsl-dspi.0", 23, MCF_CLK);
 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
@@ -140,6 +140,7 @@ static struct clk * const enable_clks[] __initconst = {
 	&__clk_0_18, /* intc0 */
 	&__clk_0_19, /* intc0 */
 	&__clk_0_20, /* intc0 */
+	&__clk_0_23, /* dspi.0 */
 	&__clk_0_24, /* uart0 */
 	&__clk_0_25, /* uart1 */
 	&__clk_0_26, /* uart2 */

arch/m68k/coldfire/m54xx.c

@@ -96,10 +96,6 @@ static void mcf54xx_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-#ifdef CONFIG_MMU
-	cf_bootmem_alloc();
-	mmu_context_init();
-#endif
 	mach_reset = mcf54xx_reset;
 	mach_sched_init = hw_timer_init;
 	m54xx_uarts_init();

arch/m68k/coldfire/stmark2.c

+/*
+ * stmark2.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-fsl-dspi.h>
+#include <linux/spi/flash.h>
+#include <asm/mcfsim.h>
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition stmark2_partitions[] = {
+	{
+		.name = "U-Boot (1024K)",
+		.size = 0x100000,
+		.offset = 0x0
+	}, {
+		.name = "Kernel+initramfs (7168K)",
+		.size = 0x700000,
+		.offset = MTDPART_OFS_APPEND
+	}, {
+		.name = "Flash Free Space (8192K)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND
+	}
+};
+
+static struct flash_platform_data stmark2_spi_flash_data = {
+	.name = "is25lp128",
+	.parts = stmark2_partitions,
+	.nr_parts = ARRAY_SIZE(stmark2_partitions),
+	.type = "is25lp128",
+};
+
+static struct spi_board_info stmark2_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &stmark2_spi_flash_data,
+		.mode = SPI_MODE_3,
+	}
+};
+
+/* SPI controller data, SPI (0) */
+static struct fsl_dspi_platform_data dspi_spi0_info = {
+	.cs_num = 4,
+	.bus_num = 0,
+	.sck_cs_delay = 100,
+	.cs_sck_delay = 100,
+};
+
+static struct resource dspi_spi0_resource[] = {
+	[0] = {
+		.start = MCFDSPI_BASE0,
+		.end   = MCFDSPI_BASE0 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = 12,
+		.end   = 13,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = MCF_IRQ_DSPI0,
+		.end   = MCF_IRQ_DSPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller, id = bus number */
+static struct platform_device dspi_spi0_device = {
+	.name = "fsl-dspi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dspi_spi0_resource),
+	.resource = dspi_spi0_resource,
+	.dev = {
+		.platform_data = &dspi_spi0_info,
+	},
+};
+
+static struct platform_device *stmark2_devices[] __initdata = {
+	&dspi_spi0_device,
+};
+
+/*
+ * Note: proper pin-mux setup is mandatory for proper SPI functionality.
+ */
+static int __init init_stmark2(void)
+{
+	/* DSPI0, all pins as DSPI, and using CS1 */
+	__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
+	__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
+
+	/* Board gpio setup */
+	__raw_writeb(0x00, MCFGPIO_PAR_BE);
+	__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
+	__raw_writeb(0x00, MCFGPIO_PAR_CS);
+	__raw_writeb(0x00, MCFGPIO_PAR_CANI2C);
+
+	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
+
+	spi_register_board_info(stmark2_board_info,
+				ARRAY_SIZE(stmark2_board_info));
+
+	return 0;
+}
+
+late_initcall(init_stmark2);

arch/m68k/configs/stmark2_defconfig

+CONFIG_LOCALVERSION="stmark2-001"
+CONFIG_DEFAULT_HOSTNAME="stmark2"
+CONFIG_SYSVIPC=y
+# CONFIG_FHANDLE is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../uClinux-dist/romfs"
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_AIO is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_CMDLINE_PARSER=y
+# CONFIG_MMU is not set
+CONFIG_M5441x=y
+CONFIG_CLOCK_FREQ=240000000
+CONFIG_STMARK2=y
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x8000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40001000
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_DEVMEM is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_FSL_DSPI=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_FSCACHE=y
+# CONFIG_PROC_SYSCTL is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+CONFIG_SLUB_DEBUG_ON=y
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1"
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC16=y

arch/m68k/include/asm/m5441xsim.h

@@ -278,4 +278,10 @@
 #define MCFGPIO_IRQ_VECBASE	(MCFINT_VECBASE - MCFGPIO_IRQ_MIN)
 #define MCFGPIO_PIN_MAX		87
 
+/*
+ *  DSPI module.
+ */
+#define MCFDSPI_BASE0		0xfc05c000
+#define MCF_IRQ_DSPI0		(MCFINT0_VECBASE + MCFINT0_DSPI0)
+
 #endif /* m5441xsim_h */

arch/m68k/include/asm/mcfmmu.h

@@ -106,6 +106,7 @@ static inline void mmu_write(u32 a, u32 v)
 }
 
 void cf_bootmem_alloc(void);
+void cf_mmu_context_init(void);
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word);
 
 #endif

arch/m68k/include/asm/mmu_context.h

@@ -92,7 +92,6 @@ static inline void activate_mm(struct mm_struct *active_mm,
 
 #define deactivate_mm(tsk, mm) do { } while (0)
 
-extern void mmu_context_init(void);
 #define prepare_arch_switch(next) load_ksp_mmu(next)
 
 static inline void load_ksp_mmu(struct task_struct *task)

arch/m68k/kernel/setup.c

@@ -4,3 +4,8 @@
 #else
 #include "setup_no.c"
 #endif
+
+#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
+void (*mach_beep)(unsigned int, unsigned int);
+EXPORT_SYMBOL(mach_beep);
+#endif

arch/m68k/kernel/setup_mm.c

@@ -106,10 +106,6 @@ EXPORT_SYMBOL(mach_heartbeat);
 #ifdef CONFIG_M68K_L2_CACHE
 void (*mach_l2_flush) (int);
 #endif
-#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
-void (*mach_beep)(unsigned int, unsigned int);
-EXPORT_SYMBOL(mach_beep);
-#endif
 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
 int isa_type;
 int isa_sex;
@@ -344,6 +340,8 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_COLDFIRE
 	case MACH_M54XX:
 	case MACH_M5441X:
+		cf_bootmem_alloc();
+		cf_mmu_context_init();
 		config_BSP(NULL, 0);
 		break;
 #endif

arch/m68k/mm/mcfmmu.c

@@ -170,7 +170,7 @@ void __init cf_bootmem_alloc(void)
 	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
 	high_memory = (void *)_ramend;
 
-	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+	m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
 	module_fixup(NULL, __start_fixup, __stop_fixup);
 
 	/* setup bootmem data */
@@ -184,7 +184,7 @@ void __init cf_bootmem_alloc(void)
  * Initialize the context management stuff.
  * The following was taken from arch/ppc/mmu_context.c
  */
-void __init mmu_context_init(void)
+void __init cf_mmu_context_init(void)
 {
 	/*
 	 * Some processors have too few contexts to reserve one for