Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (116 commits)
  [POWERPC] Add export of vgacon_remap_base
  [POWERPC] Remove bogus comment about page_is_ram
  [POWERPC] windfarm: don't die on suspend thread signal
  [POWERPC] Fix comment in kernel/irq.c
  [POWERPC] ppc: Fix booke watchdog initialization
  [POWERPC] PPC: Use ARRAY_SIZE macro when appropriate
  [POWERPC] Use ARRAY_SIZE macro when appropriate
  [POWERPC] Fix ppc64's writing to struct file_operations
  [POWERPC] ppc: use syslog macro for the printk log level
  [POWERPC] ppc: cs4218_tdm remove extra brace
  [POWERPC] Add mpc52xx/lite5200 PCI support
  [POWERPC] Only use H_BULK_REMOVE if the firmware supports it
  [POWERPC] Fixup error handling when emulating a floating point instruction
  [POWERPC] Enable interrupts if we are doing fp math emulation
  [POWERPC] Added kprobes support to ppc32
  [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
  [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace
  [POWERPC] Fix performance monitor exception
  [POWERPC] Compile fixes for arch/powerpc dcr code
  [POWERPC] Maple: use mmio nvram
  ...

arch/powerpc/Kconfig

@@ -173,6 +173,11 @@ config PPC_86xx
 	help
 	  The Freescale E600 SoCs have 74xx cores.
 
+config PPC_8xx
+	bool "Freescale 8xx"
+	select FSL_SOC
+	select 8xx
+
 config 40x
 	bool "AMCC 40x"
 	select PPC_DCR_NATIVE
@@ -181,8 +186,6 @@ config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 
-config 8xx
-	bool "Freescale 8xx"
 
 config E200
 	bool "Freescale e200"
@@ -210,6 +213,10 @@ config POWER4
 config 6xx
 	bool
 
+# this is temp to handle compat with arch=ppc
+config 8xx
+	bool
+
 # this is temp to handle compat with arch=ppc
 config 83xx
 	bool
@@ -429,6 +436,21 @@ config PPC_MPC52xx
 	bool
 	default n
 
+config PPC_MPC5200
+	bool
+	select PPC_MPC52xx
+	default n
+
+config PPC_MPC5200_BUGFIX
+	bool "MPC5200 (L25R) bugfix support"
+	depends on PPC_MPC5200
+	default n
+	help
+	  Enable workarounds for original MPC5200 errata.  This is not required
+	  for MPC5200B based boards.
+
+	  It is safe to say 'Y' here
+
 config PPC_EFIKA
 	bool "bPlan Efika 5k2. MPC5200B based computer"
 	depends on PPC_MULTIPLATFORM && PPC32
@@ -441,7 +463,7 @@ config PPC_EFIKA
 config PPC_LITE5200
 	bool "Freescale Lite5200 Eval Board"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select PPC_MPC52xx
+	select PPC_MPC5200
 	default n
 
 config PPC_PMAC
@@ -484,6 +506,7 @@ config PPC_MAPLE
 	select PPC_970_NAP
 	select PPC_NATIVE
 	select PPC_RTAS
+	select MMIO_NVRAM
 	select ATA_NONSTANDARD if ATA
 	default n
 	help
@@ -541,6 +564,16 @@ config PPC_PS3
 	  enabling this will not result in a bootable kernel on a
 	  PS3 system.
 
+config PPC_CELLEB
+	bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
+	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_CELL
+	select PPC_OF_PLATFORM_PCI
+	select HAS_TXX9_SERIAL
+	select PPC_UDBG_BEAT
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	select USB_EHCI_BIG_ENDIAN_MMIO
+
 config PPC_NATIVE
 	bool
 	depends on PPC_MULTIPLATFORM
@@ -554,6 +587,11 @@ config UDBG_RTAS_CONSOLE
 	depends on PPC_RTAS
 	default n
 
+config PPC_UDBG_BEAT
+	bool "BEAT based debug console"
+	depends on PPC_CELLEB
+	default n
+
 config XICS
 	depends on PPC_PSERIES
 	bool
@@ -707,6 +745,7 @@ source arch/powerpc/platforms/86xx/Kconfig
 source arch/powerpc/platforms/8xx/Kconfig
 source arch/powerpc/platforms/cell/Kconfig
 source arch/powerpc/platforms/ps3/Kconfig
+source arch/powerpc/platforms/pasemi/Kconfig
 
 menu "Kernel options"
 
@@ -729,7 +768,7 @@ config FORCE_MAX_ZONEORDER
 
 config MATH_EMULATION
 	bool "Math emulation"
-	depends on 4xx || 8xx || E200 || PPC_83xx || E500
+	depends on 4xx || 8xx || E200 || PPC_MPC832x || E500
 	---help---
 	  Some PowerPC chips designed for embedded applications do not have
 	  a floating-point unit and therefore do not implement the
@@ -1187,7 +1226,7 @@ source "arch/powerpc/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
-	depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES
+	depends on !BOOKE && !4xx && KALLSYMS && EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

arch/powerpc/Kconfig.debug

@@ -4,14 +4,14 @@ source "lib/Kconfig.debug"
 
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
-	depends on DEBUG_KERNEL && PPC64
+	depends on DEBUG_KERNEL
 	help
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
-	depends on DEBUG_KERNEL && PPC64
+	depends on DEBUG_KERNEL
 	help
 	  Enables the display of the minimum amount of free stack which each
 	  task has ever had available in the sysrq-T and sysrq-P debug output.
@@ -185,6 +185,20 @@ config PPC_EARLY_DEBUG_ISERIES
 	  Select this to enable early debugging for legacy iSeries. You need
 	  to hit "Ctrl-x Ctrl-x" to see the messages on the console.
 
+config PPC_EARLY_DEBUG_PAS_REALMODE
+	bool "PA Semi real mode"
+	depends on PPC_PASEMI
+	help
+	  Select this to enable early debugging for PA Semi.
+	  Output will be on UART0.
+
+config PPC_EARLY_DEBUG_BEAT
+	bool "Beat HV Console"
+	depends on PPC_CELLEB
+	select PPC_UDBG_BEAT
+	help
+	  Select this to enable early debugging for Celleb with Beat.
+
 endchoice
 
 endmenu

arch/powerpc/boot/Makefile

@@ -162,6 +162,7 @@ image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.pseries
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= zImage.ps3
+image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac

arch/powerpc/boot/dts/mpc8272ads.dts

@@ -53,13 +53,20 @@ memory {
                reg = <00000000 4000000 f4500000 00000020>;
        };
 
+       chosen {
+               name = "chosen";
+               linux,platform = <0>;
+               interrupt-controller = <10c00>;
+               linux,phandle = <400>;
+       };
+
        soc8272@f0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
                #interrupt-cells = <2>;
                device_type = "soc";
-               ranges = < 0 0 2 00000000 f0000000 00053000>;
-               reg = <f0000000 0>;
+               ranges = <00000000 f0000000 00053000>;
+               reg = <f0000000 10000>;
 
                mdio@0 {
                        device_type = "mdio";
@@ -71,7 +78,7 @@ mdio@0 {
                        ethernet-phy@0 {
                                linux,phandle = <2452000>;
                                interrupt-parent = <10c00>;
-                               interrupts = <19 1>;
+                               interrupts = <17 4>;
                                reg = <0>;
                                bitbang = [ 12 12 13 02 02 01 ];
                                device_type = "ethernet-phy";
@@ -79,7 +86,7 @@ ethernet-phy@0 {
                        ethernet-phy@1 {
                                linux,phandle = <2452001>;
                                interrupt-parent = <10c00>;
-                               interrupts = <19 1>;
+                               interrupts = <17 4>;
                                bitbang = [ 12 12 13 02 02 01 ];
                                reg = <3>;
                                device_type = "ethernet-phy";
@@ -90,7 +97,7 @@ ethernet@24000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        device_type = "network";
-                       device-id = <2>;
+                       device-id = <1>;
                        compatible = "fs_enet";
                        model = "FCC";
                        reg = <11300 20 8400 100 11380 30>;
@@ -104,7 +111,7 @@ ethernet@24000 {
 
                ethernet@25000 {
                        device_type = "network";
-                       device-id = <3>;
+                       device-id = <2>;
                        compatible = "fs_enet";
                        model = "FCC";
                        reg = <11320 20 8500 100 113b0 30>;
@@ -123,8 +130,8 @@ cpm@f0000000 {
                        #interrupt-cells = <2>;
                        device_type = "cpm";
                        model = "CPM2";
-                       ranges = <00000000 00000000 3ffff>;
-                       reg = <10d80 3280>;
+                       ranges = <00000000 00000000 20000>;
+                       reg = <0 20000>;
                        command-proc = <119c0>;
                        brg-frequency = <17D7840>;
                        cpm_clk = <BEBC200>;
@@ -133,7 +140,7 @@ scc@11a00 {
                                device_type = "serial";
                                compatible = "cpm_uart";
                                model = "SCC";
-                               device-id = <2>;
+                               device-id = <1>;
                                reg = <11a00 20 8000 100>;
                                current-speed = <1c200>;
                                interrupts = <28 2>;
@@ -147,7 +154,7 @@ scc@11a60 {
                                device_type = "serial";
                                compatible = "cpm_uart";
                                model = "SCC";
-                               device-id = <5>;
+                               device-id = <4>;
                                reg = <11a60 20 8300 100>;
                                current-speed = <1c200>;
                                interrupts = <2b 2>;
@@ -181,24 +188,24 @@ pci@0500 {
                        interrupt-map = <
 
                                        /* IDSEL 0x16 */
-                                        b000 0 0 1 f8200000 40 0
-                                        b000 0 0 2 f8200000 41 0
-                                        b000 0 0 3 f8200000 42 0
-                                        b000 0 0 4 f8200000 43 0
+                                        b000 0 0 1 f8200000 40 8
+                                        b000 0 0 2 f8200000 41 8
+                                        b000 0 0 3 f8200000 42 8
+                                        b000 0 0 4 f8200000 43 8
 
                                        /* IDSEL 0x17 */
-                                        b800 0 0 1 f8200000 43 0
-                                        b800 0 0 2 f8200000 40 0
-                                        b800 0 0 3 f8200000 41 0
-                                        b800 0 0 4 f8200000 42 0
+                                        b800 0 0 1 f8200000 43 8
+                                        b800 0 0 2 f8200000 40 8
+                                        b800 0 0 3 f8200000 41 8
+                                        b800 0 0 4 f8200000 42 8
 
                                        /* IDSEL 0x18 */
-                                        c000 0 0 1 f8200000 42 0
-                                        c000 0 0 2 f8200000 43 0
-                                        c000 0 0 3 f8200000 40 0
-                                        c000 0 0 4 f8200000 41 0>;
+                                        c000 0 0 1 f8200000 42 8
+                                        c000 0 0 2 f8200000 43 8
+                                        c000 0 0 3 f8200000 40 8
+                                        c000 0 0 4 f8200000 41 8>;
                        interrupt-parent = <10c00>;
-                       interrupts = <14 3>;
+                       interrupts = <14 8>;
                        bus-range = <0 0>;
                        ranges = <02000000 0 80000000 80000000 0 40000000
                                  01000000 0 00000000 f6000000 0 02000000>;
@@ -210,7 +217,7 @@ crypto@30000 {
                        model = "SEC2";
                        compatible = "talitos";
                        reg = <30000 10000>;
-                       interrupts = <b 0>;
+                       interrupts = <b 2>;
                        interrupt-parent = <10c00>;
                        num-channels = <4>;
                        channel-fifo-len = <18>;

arch/powerpc/boot/dts/mpc8323emds.dts

+/*
+ * MPC8323E EMDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8323EMDS";
+	compatible = "MPC83xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8323@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			32-bit;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;
+	};
+
+	bcsr@f8000000 {
+		device_type = "board-control";
+		reg = <f8000000 8000>;
+	};
+
+	soc8323@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <7DE2900>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 7000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			/* Rev. 2.2 */
+			num-channels = <1>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000004c>;
+			descriptor-types-mask = <0122003f>;
+		};
+
+		pci@8500 {
+			linux,phandle = <8500>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+					/* IDSEL 0x11 AD17 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 AD18 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 AD19 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 AD21*/
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 AD22*/
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 AD23*/
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 AD24*/
+					 c000 0 0 1 700 15 8
+					 c000 0 0 2 700 16 8
+					 c000 0 0 3 700 17 8
+					 c000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 90000000 0 10000000
+			          42000000 0 80000000 80000000 0 10000000
+			          01000000 0 00000000 d0000000 0 00100000>;
+			clock-frequency = <0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+		
+		par_io@1400 {
+			reg = <1400 100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			ucc_pin@03 {
+				linux,phandle = <140003>;
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3  4  3  0  2  0  /* MDIO */
+					3  5  1  0  2  0  /* MDC */
+					0  d  2  0  1  0 	/* RX_CLK (CLK9) */
+					3 18  2  0  1  0 	/* TX_CLK (CLK10) */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  0  1  0  1  0 	/* TxD0 */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  2  1  0  1  0 	/* TxD2 */
+					1  3  1  0  1  0 	/* TxD3 */
+					1  4  2  0  1  0 	/* RxD0 */
+					1  5  2  0  1  0 	/* RxD1 */
+					1  6  2  0  1  0 	/* RxD2 */
+					1  7  2  0  1  0 	/* RxD3 */
+					1  8  2  0  1  0 	/* RX_ER */
+					1  9  1  0  1  0 	/* TX_ER */
+					1  a  2  0  1  0 	/* RX_DV */
+					1  b  2  0  1  0 	/* COL */
+					1  c  1  0  1  0 	/* TX_EN */
+					1  d  2  0  1  0>;/* CRS */
+			};
+			ucc_pin@04 {
+				linux,phandle = <140004>;
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3 1f  2  0  1  0 	/* RX_CLK (CLK7) */
+					3  6  2  0  1  0 	/* TX_CLK (CLK8) */
+					1 12  1  0  1  0 	/* TxD0 */
+					1 13  1  0  1  0 	/* TxD1 */
+					1 14  1  0  1  0 	/* TxD2 */
+					1 15  1  0  1  0 	/* TxD3 */
+					1 16  2  0  1  0 	/* RxD0 */
+					1 17  2  0  1  0 	/* RxD1 */
+					1 18  2  0  1  0 	/* RxD2 */
+					1 19  2  0  1  0 	/* RxD3 */
+					1 1a  2  0  1  0 	/* RX_ER */
+					1 1b  1  0  1  0 	/* TX_ER */
+					1 1c  2  0  1  0 	/* RX_DV */
+					1 1d  2  0  1  0 	/* COL */
+					1 1e  1  0  1  0 	/* TX_EN */
+					1 1f  2  0  1  0>;/* CRS */
+			};
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		model = "QE";
+		ranges = <0 e0100000 00100000>;
+		reg = <e0100000 480>;
+		brg-frequency = <0>;
+		bus-frequency = <BCD3D80>;
+		
+		muram@10000 {
+			device_type = "muram";
+			ranges = <0 00010000 00004000>;
+	
+			data-only@0 {
+				reg = <0 4000>;
+			};
+		};
+
+		spi@4c0 {
+			device_type = "spi";
+			compatible = "fsl_spi";
+			reg = <4c0 40>;
+			interrupts = <2>;
+			interrupt-parent = <80>;
+			mode = "cpu";
+		};
+
+		spi@500 {
+			device_type = "spi";
+			compatible = "fsl_spi";
+			reg = <500 40>;
+			interrupts = <1>;
+			interrupt-parent = <80>;
+			mode = "cpu";
+		};
+
+		usb@6c0 {
+			device_type = "usb";
+			compatible = "qe_udc";
+			reg = <6c0 40 8B00 100>;
+			interrupts = <b>;
+			interrupt-parent = <80>;
+			mode = "slave";
+		};
+
+		ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			model = "UCC";
+			device-id = <3>;
+			reg = <2200 200>;
+			interrupts = <22>;
+			interrupt-parent = <80>;
+			mac-address = [ 00 04 9f 00 23 23 ];
+			rx-clock = <19>;
+			tx-clock = <1a>;
+			phy-handle = <212003>;
+			pio-handle = <140003>;
+		};
+
+		ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			model = "UCC";
+			device-id = <4>;
+			reg = <3000 200>;
+			interrupts = <23>;
+			interrupt-parent = <80>;
+			mac-address = [ 00 11 22 33 44 55 ];
+			rx-clock = <17>;
+			tx-clock = <18>;
+			phy-handle = <212004>;
+			pio-handle = <140004>;
+		};
+
+		mdio@2320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2320 18>;
+			device_type = "mdio";
+			compatible = "ucc_geth_phy";
+
+			ethernet-phy@03 {
+				linux,phandle = <212003>;
+				interrupt-parent = <700>;
+				interrupts = <11 2>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+				interface = <3>; //ENET_100_MII
+			};
+			ethernet-phy@04 {
+				linux,phandle = <212004>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+				interface = <3>;
+			};
+		};
+
+		qeic@80 {
+			linux,phandle = <80>;
+			interrupt-controller;
+			device_type = "qeic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <80 80>;
+			built-in;
+			big-endian;
+			interrupts = <20 8 21 8>; //high:32 low:33
+			interrupt-parent = <700>;
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -200,7 +200,7 @@ a800 0 0 3 40000 34 1
 					 a800 0 0 4 40000 31 1>;
 
 			interrupt-parent = <40000>;
-			interrupts = <42 0>;
+			interrupts = <8 0>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
 				  01000000 0 00000000 e2000000 0 01000000>;
@@ -250,7 +250,7 @@ scc@91a00 {
 				rx-clock = <1>;
 				tx-clock = <1>;
 				current-speed = <1c200>;
-				interrupts = <64 1>;
+				interrupts = <28 8>;
 				interrupt-parent = <90c00>;
 			};
 
@@ -264,7 +264,7 @@ scc@91a20 {
 				rx-clock = <2>;
 				tx-clock = <2>;
 				current-speed = <1c200>;
-				interrupts = <65 1>;
+				interrupts = <29 8>;
 				interrupt-parent = <90c00>;
 			};
 
@@ -278,7 +278,7 @@ fcc@91320 {
 				clock-setup = <ff00ffff 250000>;
 				rx-clock = <15>;
 				tx-clock = <16>;
-				interrupts = <5d 1>;
+				interrupts = <21 8>;
 				interrupt-parent = <90c00>;
 				phy-handle = <2452002>;
 			};
@@ -293,7 +293,7 @@ fcc@91340 {
 				clock-setup = <ffff00ff 3700>;
 				rx-clock = <17>;
 				tx-clock = <18>;
-				interrupts = <5e 1>;
+				interrupts = <22 8>;
 				interrupt-parent = <90c00>;
 				phy-handle = <2452003>;
 			};

arch/powerpc/boot/dts/mpc866ads.dts

+/*
+ * MPC866 ADS Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC866ADS";
+	compatible = "mpc8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,866@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <2000>;		// L1, 8K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			32-bit;
+			interrupts = <f 2>;	// decrementer interrupt
+			interrupt-parent = <ff000000>;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 800000>;
+	};
+
+	soc866@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 ff000000 00100000>;
+		reg = <ff000000 00000200>;
+		bus-frequency = <0>;
+		mdio@e80 {
+			device_type = "mdio";
+			compatible = "fs_enet";
+			reg = <e80 8>;
+			linux,phandle = <e80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ethernet-phy@f {
+				linux,phandle = <e800f>;
+				reg = <f>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		fec@e00 {
+			device_type = "network";
+			compatible = "fs_enet";
+			model = "FEC";
+			device-id = <1>;
+			reg = <e00 188>;
+			mac-address = [ 00 00 0C 00 01 FD ];
+			interrupts = <3 1>;
+			interrupt-parent = <ff000000>;
+			phy-handle = <e800f>;
+		};
+
+		pic@ff000000 {
+			linux,phandle = <ff000000>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0 24>;
+			built-in;
+			device_type = "mpc8xx-pic";
+			compatible = "CPM";
+		};
+
+		cpm@ff000000 {
+			linux,phandle = <ff000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "cpm";
+			model = "CPM";
+			ranges = <0 0 4000>;
+			reg = <860 f0>;
+			command-proc = <9c0>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <930>;
+
+			pic@930 {
+				linux,phandle = <930>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <ff000000>;
+				reg = <930 20>;
+				built-in;
+				device_type = "cpm-pic";
+				compatible = "CPM";
+			};
+
+			smc@a80 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SMC";
+				device-id = <1>;
+				reg = <a80 10 3e80 40>;
+				clock-setup = <00ffffff 0>;
+				rx-clock = <1>;
+				tx-clock = <1>;
+				current-speed = <0>;
+				interrupts = <4 3>;
+				interrupt-parent = <930>;
+			};
+
+			smc@a90 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SMC";
+				device-id = <2>;
+				reg = <a90 20 3f80 40>;
+				clock-setup = <ff00ffff 90000>;
+				rx-clock = <2>;
+				tx-clock = <2>;
+				current-speed = <0>;
+				interrupts = <3 3>;
+				interrupt-parent = <930>;
+			};
+
+			scc@a00 {
+				device_type = "network";
+				compatible = "fs_enet";
+				model = "SCC";
+				device-id = <1>;
+				reg = <a00 18 3c00 80>;
+				mac-address = [ 00 00 0C 00 03 FD ];
+				interrupts = <1e 3>;
+				interrupt-parent = <930>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/mpc885ads.dts

+/*
+ * MPC885 ADS Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC885ADS";
+	compatible = "mpc8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,885@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <2000>;		// L1, 8K
+			i-cache-size = <2000>;		// L1, 8K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			32-bit;
+			interrupts = <f 2>;	// decrementer interrupt
+			interrupt-parent = <ff000000>;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 800000>;
+	};
+
+	soc885@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 ff000000 00100000>;
+		reg = <ff000000 00000200>;
+		bus-frequency = <0>;
+		mdio@e80 {
+			device_type = "mdio";
+			compatible = "fs_enet";
+			reg = <e80 8>;
+			linux,phandle = <e80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ethernet-phy@0 {
+				linux,phandle = <e8000>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <e8001>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@2 {
+				linux,phandle = <e8002>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		fec@e00 {
+			device_type = "network";
+			compatible = "fs_enet";
+			model = "FEC";
+			device-id = <1>;
+			reg = <e00 188>;
+			mac-address = [ 00 00 0C 00 01 FD ];
+			interrupts = <3 1>;
+			interrupt-parent = <ff000000>;
+			phy-handle = <e8000>;
+		};
+
+		fec@1e00 {
+			device_type = "network";
+			compatible = "fs_enet";
+			model = "FEC";
+			device-id = <2>;
+			reg = <1e00 188>;
+			mac-address = [ 00 00 0C 00 02 FD ];
+			interrupts = <7 1>;
+			interrupt-parent = <ff000000>;
+			phy-handle = <e8001>;
+		};
+
+		pic@ff000000 {
+			linux,phandle = <ff000000>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0 24>;
+			built-in;
+			device_type = "mpc8xx-pic";
+			compatible = "CPM";
+		};
+
+		cpm@ff000000 {
+			linux,phandle = <ff000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "cpm";
+			model = "CPM";
+			ranges = <0 0 4000>;
+			reg = <860 f0>;
+			command-proc = <9c0>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <930>;
+
+			pic@930 {
+				linux,phandle = <930>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <ff000000>;
+				reg = <930 20>;
+				built-in;
+				device_type = "cpm-pic";
+				compatible = "CPM";
+			};
+
+			smc@a80 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SMC";
+				device-id = <1>;
+				reg = <a80 10 3e80 40>;
+				clock-setup = <00ffffff 0>;
+				rx-clock = <1>;
+				tx-clock = <1>;
+				current-speed = <0>;
+				interrupts = <4 3>;
+				interrupt-parent = <930>;
+			};
+
+			smc@a90 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SMC";
+				device-id = <2>;
+				reg = <a90 20 3f80 40>;
+				clock-setup = <ff00ffff 90000>;
+				rx-clock = <2>;
+				tx-clock = <2>;
+				current-speed = <0>;
+				interrupts = <3 3>;
+				interrupt-parent = <930>;
+			};
+
+			scc@a40 {
+				device_type = "network";
+				compatible = "fs_enet";
+				model = "SCC";
+				device-id = <3>;
+				reg = <a40 18 3e00 80>;
+				mac-address = [ 00 00 0C 00 03 FD ];
+				interrupts = <1c 3>;
+				interrupt-parent = <930>;
+				phy-handle = <e8002>;
+			};
+		};
+	};
+};

arch/powerpc/configs/mpc834x_itx_defconfig

 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:23:43 2007
+# Fri Jan 26 00:19:02 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -149,7 +149,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -324,6 +323,7 @@ CONFIG_MTD=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
 # CONFIG_MTD_BLOCK is not set
 # CONFIG_MTD_BLOCK_RO is not set
 # CONFIG_FTL is not set
@@ -366,6 +366,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0xfe000000
 CONFIG_MTD_PHYSMAP_LEN=0x1000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -390,6 +391,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # NAND Flash Device Drivers
 #
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
 
 #
 # OneNAND Flash Device Drivers
@@ -1011,7 +1013,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #

arch/powerpc/configs/mpc834x_mds_defconfig

 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:24:10 2007
+# Fri Jan 26 00:19:27 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -149,7 +149,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y

arch/powerpc/configs/mpc8360emds_defconfig

 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:24:40 2007
+# Fri Jan 26 00:19:45 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -150,7 +150,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y

arch/powerpc/configs/ps3_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:29:11 2007
+# Linux kernel version: 2.6.20-rc6
+# Thu Jan 25 13:35:34 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -70,10 +70,10 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -160,7 +160,7 @@ CONFIG_SPU_BASE=y
 # PS3 Platform Options
 #
 CONFIG_PS3_HTAB_SIZE=20
-CONFIG_PS3_DYNAMIC_DMA=y
+# CONFIG_PS3_DYNAMIC_DMA is not set
 CONFIG_PS3_USE_LPAR_ADDR=y
 CONFIG_PS3_VUART=y
 
@@ -207,7 +207,7 @@ CONFIG_PPC_64K_PAGES=y
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="root=/dev/nfs rw ip=dhcp"
+CONFIG_CMDLINE="root=/dev/sda1 ip=dhcp"
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -240,7 +240,8 @@ CONFIG_NET=y
 # Networking options
 #
 # CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -353,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -380,10 +382,11 @@ CONFIG_SCSI_PROC_FS=y
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
 
@@ -456,6 +459,7 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
 
 #
 # Ethernet (1000 Mbit)
@@ -504,10 +508,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -598,6 +605,7 @@ CONFIG_GEN_RTC=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -626,14 +634,141 @@ CONFIG_HID=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=y
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+
+#
+# USB DSL modem support
+#
+
 #
 # USB Gadget Support
 #
@@ -691,8 +826,14 @@ CONFIG_HID=y
 # File systems
 #
 # CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -712,14 +853,20 @@ CONFIG_DNOTIFY=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -785,7 +932,46 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 
 #
 # Distributed Lock Manager
@@ -795,9 +981,10 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_IOMAP_COPY=y
@@ -821,22 +1008,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_RWSEMS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y

arch/powerpc/kernel/Makefile

@@ -17,6 +17,7 @@ obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_ppc970.o \
+				   cpu_setup_pa6t.o \
 				   firmware.o sysfs.o nvram_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o

arch/powerpc/kernel/cpu_setup_pa6t.S

+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+/* Right now, restore and setup are the same thing */
+_GLOBAL(__restore_cpu_pa6t)
+_GLOBAL(__setup_cpu_pa6t)
+	/* Do nothing if not running in HV mode */
+	mfmsr	r0
+	rldicl.	r0,r0,4,63
+	beqlr
+
+	mfspr	r0,SPRN_HID5
+	ori	r0,r0,0x30
+	mtspr	SPRN_HID5,r0
+
+	mfspr	r0,SPRN_LPCR
+	ori	r0,r0,0x7000
+	mtspr	SPRN_LPCR,r0
+
+	blr

arch/powerpc/kernel/cputable.c

@@ -43,6 +43,8 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
 #ifdef CONFIG_PPC64
 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_ppc970(void);
 #endif /* CONFIG_PPC64 */
 
@@ -86,6 +88,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power3",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "power3",
@@ -99,6 +102,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power3",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "power3",
@@ -112,6 +116,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -125,6 +130,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -138,6 +144,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -151,6 +158,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/rs64",
 		.oprofile_type		= PPC_OPROFILE_RS64,
 		.platform		= "rs64",
@@ -164,6 +172,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power4",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power4",
@@ -177,6 +186,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power4",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power4",
@@ -191,6 +201,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
@@ -207,6 +218,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
@@ -239,6 +251,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
@@ -253,6 +266,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power5",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		/* SIHV / SIPR bits are implemented on POWER4+ (GQ)
@@ -271,6 +285,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power5+",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.oprofile_mmcra_sihv	= MMCRA_SIHV,
@@ -321,6 +336,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power6",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
  		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
@@ -340,6 +356,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/cell-be",
 		.oprofile_type		= PPC_OPROFILE_CELL,
 		.platform		= "ppc-cell-be",
@@ -353,6 +370,9 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_PA6T,
+		.cpu_setup		= __setup_cpu_pa6t,
+		.cpu_restore		= __restore_cpu_pa6t,
 		.platform		= "pa6t",
 	},
 	{	/* default match */
@@ -364,6 +384,7 @@ static struct cpu_spec cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
 		.platform		= "power4",
 	}
 #endif	/* CONFIG_PPC64 */

arch/powerpc/kernel/head_32.S

@@ -344,12 +344,7 @@ i##n:								\
 /* System reset */
 /* core99 pmac starts the seconary here by changing the vector, and
    putting it back to what it was (unknown_exception) when done.  */
-#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
-	. = 0x100
-	b	__secondary_start_gemini
-#else
 	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-#endif
 
 /* Machine check */
 /*

arch/powerpc/kernel/head_64.S

@@ -613,7 +613,7 @@ system_call_pSeries:
 /*** pSeries interrupt support ***/
 
 	/* moved from 0xf00 */
-	MASKABLE_EXCEPTION_PSERIES(., performance_monitor)
+	STD_EXCEPTION_PSERIES(., performance_monitor)
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,

arch/powerpc/kernel/pci_32.c

@@ -1450,7 +1450,6 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 		return -1;
 	}
 	pci_dev->irq = virq;
-	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
 
 	return 0;
 }