Commit 228e3023 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'mct-exynos-for-v3.10' of...

Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add support exynos mct device tree and move into drivers/clocksource

* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clocksource: mct: Add terminating entry for exynos_mct_ids table
  clocksource: mct: Add missing semicolons in exynos_mct.c
  ARM: EXYNOS: move mct driver to drivers/clocksource
  ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
  ARM: dts: add mct device tree node for all supported Exynos SoC's
  ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
  ARM: EXYNOS: add device tree support for MCT controller driver
  ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
  ARM: EXYNOS: add a register base address variable in mct controller driver

Conflicts:
	drivers/clocksource/Makefile
	drivers/clocksource/exynos_mct.c

[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 894b7382 354599f4
Samsung's Multi Core Timer (MCT)
The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
global timer and CPU local timers. The global timer is a 64-bit free running
up-counter and can generate 4 interrupts when the counter reaches one of the
four preset counter values. The CPU local timers are 32-bit free running
down-counters and generate an interrupt when the counter expires. There is
one CPU local timer instantiated in MCT for every CPU in the system.
Required properties:
- compatible: should be "samsung,exynos4210-mct".
(a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
(b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
- reg: base address of the mct controller and length of the address space
it occupies.
- interrupts: the list of interrupts generated by the controller. The following
should be the order of the interrupts specified. The local timer interrupts
should be specified after the four global timer interrupts have been
specified.
0: Global Timer Interrupt 0
1: Global Timer Interrupt 1
2: Global Timer Interrupt 2
3: Global Timer Interrupt 3
4: Local Timer Interrupt 0
5: Local Timer Interrupt 1
6: ..
7: ..
i: Local Timer Interrupt n
Example 1: In this example, the system uses only the first global timer
interrupt generated by MCT and the remaining three global timer
interrupts are unused. Two local timer interrupts have been
specified.
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
<0 42 0>, <0 48 0>;
};
Example 2: In this example, the MCT global and local timer interrupts are
connected to two seperate interrupt controllers. Hence, an
interrupt-map is created to map the interrupts to the respective
interrupt controllers.
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
#interrups-cells = <2>;
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
mct_map: mct-map {
#interrupt-cells = <2>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0x0 0 &combiner 23 3>,
<0x4 0 &gic 0 120 0>,
<0x5 0 &gic 0 121 0>;
};
};
......@@ -1654,7 +1654,7 @@ config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP
default y
select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
......
......@@ -47,6 +47,28 @@ combiner:interrupt-controller@10440000 {
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
interrupt-controller;
#interrups-cells = <2>;
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
mct_map: mct-map {
#interrupt-cells = <2>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0x0 0 &gic 0 57 0>,
<0x1 0 &gic 0 69 0>,
<0x2 0 &combiner 12 6>,
<0x3 0 &combiner 12 7>,
<0x4 0 &gic 0 42 0>,
<0x5 0 &gic 0 48 0>;
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
......
......@@ -25,4 +25,26 @@ / {
gic:interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
mct@10050000 {
compatible = "samsung,exynos4412-mct";
reg = <0x10050000 0x800>;
interrupt-controller;
#interrups-cells = <2>;
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
mct_map: mct-map {
#interrupt-cells = <2>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0x0 0 &gic 0 57 0>,
<0x1 0 &combiner 12 5>,
<0x2 0 &combiner 12 6>,
<0x3 0 &combiner 12 7>,
<0x4 0 &gic 1 12 0>,
<0x5 0 &gic 1 12 0>;
};
};
};
......@@ -25,4 +25,28 @@ / {
gic:interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
mct@10050000 {
compatible = "samsung,exynos4412-mct";
reg = <0x10050000 0x800>;
interrupt-controller;
#interrups-cells = <2>;
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>, <6 0>, <7 0>;
mct_map: mct-map {
#interrupt-cells = <2>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0x0 0 &gic 0 57 0>,
<0x1 0 &combiner 12 5>,
<0x2 0 &combiner 12 6>,
<0x3 0 &combiner 12 7>,
<0x4 0 &gic 1 12 0>,
<0x5 0 &gic 1 12 0>,
<0x6 0 &gic 1 12 0>,
<0x7 0 &gic 1 12 0>;
};
};
};
......@@ -69,6 +69,28 @@ combiner:interrupt-controller@10440000 {
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
#interrups-cells = <2>;
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
mct_map: mct-map {
#interrupt-cells = <2>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0x0 0 &combiner 23 3>,
<0x1 0 &combiner 23 4>,
<0x2 0 &combiner 25 2>,
<0x3 0 &combiner 25 3>,
<0x4 0 &gic 0 120 0>,
<0x5 0 &gic 0 121 0>;
};
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
......
......@@ -79,12 +79,6 @@ config SOC_EXYNOS5440
help
Enable EXYNOS5440 SoC support
config EXYNOS4_MCT
bool
default y
help
Use MCT (Multi Core Timer) as kernel timers
config EXYNOS_DEV_DMA
bool
help
......@@ -406,6 +400,7 @@ config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select ARM_AMBA
select CLKSRC_OF
select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
......@@ -422,6 +417,7 @@ config MACH_EXYNOS5_DT
default y
depends on ARCH_EXYNOS5
select ARM_AMBA
select CLKSRC_OF
select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
......
......@@ -26,8 +26,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += pmu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_EXYNOS4_MCT) += mct.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
......
......@@ -256,11 +256,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
......
......@@ -12,7 +12,7 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
extern void exynos4_timer_init(void);
extern void mct_init(void);
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
......
......@@ -30,8 +30,6 @@
/* For EXYNOS4 and EXYNOS5 */
#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
/* For EXYNOS4 SoCs */
......@@ -323,8 +321,6 @@
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
......@@ -419,8 +415,6 @@
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
......
......@@ -65,7 +65,6 @@
#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
#define EXYNOS5_PA_SYSTIMER 0x101C0000
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS5_PA_WATCHDOG 0x101D0000
......
/* arch/arm/mach-exynos4/include/mach/regs-mct.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 MCT configutation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_MCT_H
#define __ASM_ARCH_REGS_MCT_H __FILE__
#include <mach/map.h>
#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
#define MCT_L_TCON_OFFSET (0x20)
#define MCT_L_INT_CSTAT_OFFSET (0x30)
#define MCT_L_INT_ENB_OFFSET (0x34)
#define MCT_L_WSTAT_OFFSET (0x40)
#define MCT_G_TCON_START (1 << 8)
#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
#define MCT_L_TCON_INT_START (1 << 1)
#define MCT_L_TCON_TIMER_START (1 << 0)
#endif /* __ASM_ARCH_REGS_MCT_H */
......@@ -202,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.restart = exynos4_restart,
MACHINE_END
......@@ -13,6 +13,7 @@
#include <linux/of_platform.h>
#include <linux/serial_core.h>
#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
......@@ -142,7 +143,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
.map_io = exynos4_dt_map_io,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = clocksource_of_init,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
MACHINE_END
......@@ -14,6 +14,7 @@
#include <linux/serial_core.h>
#include <linux/memblock.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
......@@ -216,7 +217,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
.map_io = exynos5_dt_map_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = clocksource_of_init,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
......
......@@ -1380,7 +1380,7 @@ MACHINE_START(NURI, "NURI")
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END
......@@ -815,7 +815,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
......@@ -376,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
......@@ -390,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
......@@ -423,7 +423,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
......@@ -436,7 +436,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
.init_time = exynos4_timer_init,
.init_time = mct_init,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
......@@ -70,3 +70,8 @@ config CLKSRC_METAG_GENERIC
def_bool y if METAG
help
This option enables support for the Meta per-thread timers.
config CLKSRC_EXYNOS_MCT
def_bool y if ARCH_EXYNOS
help
Support for Multi Core Timer controller on Exynos SoCs.
......@@ -20,6 +20,7 @@ obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
......@@ -20,6 +20,9 @@
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/clocksource.h>
#include <asm/arch_timer.h>
#include <asm/localtimer.h>
......@@ -28,9 +31,36 @@
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
#define EXYNOS4_MCTREG(x) (x)
#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
#define MCT_L_TCON_OFFSET (0x20)
#define MCT_L_INT_CSTAT_OFFSET (0x30)
#define MCT_L_INT_ENB_OFFSET (0x34)
#define MCT_L_WSTAT_OFFSET (0x40)
#define MCT_G_TCON_START (1 << 8)
#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
#define MCT_L_TCON_INT_START (1 << 1)
#define MCT_L_TCON_TIMER_START (1 << 0)
#define TICK_BASE_CNT 1
enum {
......@@ -38,64 +68,75 @@ enum {
MCT_INT_PPI
};
enum {
MCT_G0_IRQ,
MCT_G1_IRQ,
MCT_G2_IRQ,
MCT_G3_IRQ,
MCT_L0_IRQ,
MCT_L1_IRQ,
MCT_L2_IRQ,
MCT_L3_IRQ,
MCT_NR_IRQS,
};
static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
static int mct_irqs[MCT_NR_IRQS];
struct mct_clock_event_device {
struct clock_event_device *evt;
void __iomem *base;
unsigned long base;
char name[10];
};
static void exynos4_mct_write(unsigned int value, void *addr)
static void exynos4_mct_write(unsigned int value, unsigned long offset)
{
void __iomem *stat_addr;
unsigned long stat_addr;
u32 mask;
u32 i;
__raw_writel(value, addr);
__raw_writel(value, reg_base + offset);
if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
case (u32) MCT_L_TCON_OFFSET:
stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
switch (offset & EXYNOS4_MCT_L_MASK) {
case MCT_L_TCON_OFFSET:
mask = 1 << 3; /* L_TCON write status */
break;
case (u32) MCT_L_ICNTB_OFFSET:
stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
case MCT_L_ICNTB_OFFSET:
mask = 1 << 1; /* L_ICNTB write status */
break;
case (u32) MCT_L_TCNTB_OFFSET:
stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
case MCT_L_TCNTB_OFFSET:
mask = 1 << 0; /* L_TCNTB write status */
break;
default:
return;
}
} else {
switch ((u32) addr) {
case (u32) EXYNOS4_MCT_G_TCON:
switch (offset) {
case EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_L:
case EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_U:
case EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
case EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
break;
case (u32) EXYNOS4_MCT_G_CNT_L:
case EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
case (u32) EXYNOS4_MCT_G_CNT_U:
case EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
......@@ -106,12 +147,12 @@ static void exynos4_mct_write(unsigned int value, void *addr)
/* Wait maximum 1 ms until written values are applied */
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
if (__raw_readl(stat_addr) & mask) {
__raw_writel(mask, stat_addr);
if (__raw_readl(reg_base + stat_addr) & mask) {
__raw_writel(mask, reg_base + stat_addr);
return;
}
panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
}
/* Clocksource handling */
......@@ -122,7 +163,7 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo)
exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
reg = __raw_readl(EXYNOS4_MCT_G_TCON);
reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
reg |= MCT_G_TCON_START;
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
......@@ -130,12 +171,12 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo)
static cycle_t exynos4_frc_read(struct clocksource *cs)
{
unsigned int lo, hi;
u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
do {
hi = hi2;
lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
} while (hi != hi2);
return ((cycle_t)hi << 32) | lo;
......@@ -167,7 +208,7 @@ static void exynos4_mct_comp0_stop(void)
{
unsigned int tcon;
tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
......@@ -180,7 +221,7 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
unsigned int tcon;
cycle_t comp_cycle;
tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
......@@ -257,11 +298,7 @@ static void exynos4_clockevent_init(void)
mct_comp_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
if (soc_is_exynos5250())
setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
else
setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
......@@ -273,12 +310,12 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
unsigned long tmp;
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
tmp = __raw_readl(addr);
tmp = __raw_readl(reg_base + offset);
if (tmp & mask) {
tmp &= ~mask;
exynos4_mct_write(tmp, addr);
exynos4_mct_write(tmp, offset);
}
}
......@@ -297,7 +334,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
/* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
MCT_L_TCON_INTERVAL_MODE;
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
......@@ -349,7 +386,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
return 1;
} else {
......@@ -385,7 +422,6 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
......@@ -406,21 +442,17 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
evt->irq = mct_lx_irq;
setup_irq(mct_lx_irq, &mct_tick0_event_irq);
evt->irq = mct_irqs[MCT_L0_IRQ];
setup_irq(evt->irq, &mct_tick0_event_irq);
} else {
mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
evt->irq = mct_lx_irq;
setup_irq(mct_lx_irq, &mct_tick1_event_irq);
irq_set_affinity(mct_lx_irq, cpumask_of(1));
evt->irq = mct_irqs[MCT_L1_IRQ];
setup_irq(evt->irq, &mct_tick1_event_irq);
irq_set_affinity(evt->irq, cpumask_of(1));
}
} else {
enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
return 0;
......@@ -436,7 +468,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt)
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
}
static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
......@@ -445,41 +477,80 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
};
#endif /* CONFIG_LOCAL_TIMERS */
static void __init exynos4_timer_resources(void)
static void __init exynos4_timer_resources(void __iomem *base)
{
struct clk *mct_clk;
mct_clk = clk_get(NULL, "xtal");
clk_rate = clk_get_rate(mct_clk);
reg_base = base;
if (!reg_base)
panic("%s: unable to ioremap mct address space\n", __func__);
#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
EXYNOS_IRQ_MCT_LOCALTIMER, err);
mct_irqs[MCT_L0_IRQ], err);
}
local_timer_register(&exynos4_mct_tick_ops);
#endif /* CONFIG_LOCAL_TIMERS */
}
void __init exynos4_timer_init(void)
void __init mct_init(void)
{
if (soc_is_exynos5440()) {
arch_timer_of_register();
return;
if (soc_is_exynos4210()) {
mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
mct_int_type = MCT_INT_SPI;
} else {
panic("unable to determine mct controller type\n");
}
if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
mct_int_type = MCT_INT_SPI;
else
mct_int_type = MCT_INT_PPI;
exynos4_timer_resources(S5P_VA_SYSTIMER);
exynos4_clocksource_init();
exynos4_clockevent_init();
}
exynos4_timer_resources();
static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
{
u32 nr_irqs, i;
mct_int_type = int_type;
/* This driver uses only one global timer interrupt */
mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
/*
* Find out the number of local irqs specified. The local
* timer irqs are specified after the four global timer
* irqs are specified.
*/
nr_irqs = of_irq_count(np);
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
mct_irqs[i] = irq_of_parse_and_map(np, i);
exynos4_timer_resources(of_iomap(np, 0));
exynos4_clocksource_init();
exynos4_clockevent_init();
}
static void __init mct_init_spi(struct device_node *np)
{
return mct_init_dt(np, MCT_INT_SPI);
}
static void __init mct_init_ppi(struct device_node *np)
{
return mct_init_dt(np, MCT_INT_PPI);
}
CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment