spi: Remove duplicate code to set default bits_per_word setting

The implementation in spi_setup() already set spi->bits_per_word = 8 when
spi->bits_per_word is 0 before calling spi->master->setup.
So we don't need to do it again in setup() callback.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers/spi/spi-davinci.c

@@ -396,10 +396,6 @@ static int davinci_spi_setup(struct spi_device *spi)
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = &dspi->pdata;
 
-	/* if bits per word length is zero then set it default 8 */
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	if (!(spi->mode & SPI_NO_CS)) {
 		if ((pdata->chip_sel == NULL) ||
 		    (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))

drivers/spi/spi-fsl-dspi.c

@@ -373,9 +373,6 @@ static int dspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	return dspi_setup_transfer(spi, NULL);
 }
 

drivers/spi/spi-mxs.c

@@ -111,14 +111,6 @@ static int mxs_spi_setup_transfer(struct spi_device *dev,
 	return 0;
 }
 
-static int mxs_spi_setup(struct spi_device *dev)
-{
-	if (!dev->bits_per_word)
-		dev->bits_per_word = 8;
-
-	return 0;
-}
-
 static u32 mxs_spi_cs_to_reg(unsigned cs)
 {
 	u32 select = 0;
@@ -502,7 +494,6 @@ static int mxs_spi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	master->transfer_one_message = mxs_spi_transfer_one;
-	master->setup = mxs_spi_setup;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->mode_bits = SPI_CPOL | SPI_CPHA;
 	master->num_chipselect = 3;

drivers/spi/spi-rspi.c

@@ -802,8 +802,6 @@ static int rspi_setup(struct spi_device *spi)
 {
 	struct rspi_data *rspi = spi_master_get_devdata(spi->master);
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
 	rspi->max_speed_hz = spi->max_speed_hz;
 
 	rspi->spcmd = SPCMD_SSLKP;

drivers/spi/spi-sc18is602.c

@@ -254,9 +254,6 @@ static int sc18is602_transfer_one(struct spi_master *master,
 
 static int sc18is602_setup(struct spi_device *spi)
 {
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	if (spi->mode & ~(SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST))
 		return -EINVAL;
 

drivers/spi/spi-sh.c

@@ -358,9 +358,6 @@ static int spi_sh_setup(struct spi_device *spi)
 {
 	struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	pr_debug("%s: enter\n", __func__);
 
 	spi_sh_write(ss, 0xfe, SPI_SH_CR1);	/* SPI sycle stop */

drivers/spi/spi-sirf.c

@@ -536,16 +536,9 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 static int spi_sirfsoc_setup(struct spi_device *spi)
 {
-	struct sirfsoc_spi *sspi;
-
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	sspi = spi_master_get_devdata(spi->master);
-
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	return spi_sirfsoc_setup_transfer(spi, NULL);
 }
 

drivers/spi/spi-topcliff-pch.c

@@ -466,12 +466,6 @@ static void pch_spi_reset(struct spi_master *master)
 
 static int pch_spi_setup(struct spi_device *pspi)
 {
-	/* check bits per word */
-	if (pspi->bits_per_word == 0) {
-		pspi->bits_per_word = 8;
-		dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__);
-	}
-
 	/* Check baud rate setting */
 	/* if baud rate of chip is greater than
 	   max we can support,return error */