[MTD] [NAND] alauda: use USB API functions rather than constants

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/nand/alauda.c

@@ -676,11 +676,11 @@ static int alauda_probe(struct usb_interface *interface,
 		goto error;
 
 	al->write_out = usb_sndbulkpipe(al->dev,
-			ep_wr->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+			usb_endpoint_num(ep_wr));
 	al->bulk_in = usb_rcvbulkpipe(al->dev,
-			ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+			usb_endpoint_num(ep_in));
 	al->bulk_out = usb_sndbulkpipe(al->dev,
-			ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+			usb_endpoint_num(ep_out));
 
 	/* second device is identical up to now */
 	memcpy(al+1, al, sizeof(*al));