IIO: GYRO: IIO driver for Analog Devices Digital Output Gyroscope ADXRS450

From: Cliff Cai <cliff.cai@analog.com>

Add new IIO driver for Analog Devices digital output gyroscope ADXRS450
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/iio/gyro/Kconfig

@@ -35,3 +35,13 @@ config ADIS16260
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called adis16260.
+
+config ADXRS450
+	tristate "Analog Devices ADXRS450 Digital Output Gyroscope SPI driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADXRS450 programmable
+	  digital output gyroscope.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adxrs450.

drivers/staging/iio/gyro/Makefile

@@ -17,3 +17,6 @@ obj-$(CONFIG_ADIS16260) += adis16260.o
 
 adis16251-y             := adis16251_core.o
 obj-$(CONFIG_ADIS16251) += adis16251.o
+
+adxrs450-y             := adxrs450_core.o
+obj-$(CONFIG_ADXRS450) += adxrs450.o

drivers/staging/iio/gyro/adxrs450.h

+#ifndef SPI_ADXRS450_H_
+#define SPI_ADXRS450_H_
+
+#define ADXRS450_STARTUP_DELAY	50 /* ms */
+
+/* The MSB for the spi commands */
+#define ADXRS450_SENSOR_DATA    0x20
+#define ADXRS450_WRITE_DATA	0x40
+#define ADXRS450_READ_DATA	0x80
+
+#define ADXRS450_RATE1	0x00	/* Rate Registers */
+#define ADXRS450_TEMP1	0x02	/* Temperature Registers */
+#define ADXRS450_LOCST1	0x04	/* Low CST Memory Registers */
+#define ADXRS450_HICST1	0x06	/* High CST Memory Registers */
+#define ADXRS450_QUAD1	0x08	/* Quad Memory Registers */
+#define ADXRS450_FAULT1	0x0A	/* Fault Registers */
+#define ADXRS450_PID1	0x0C	/* Part ID Register 1 */
+#define ADXRS450_SNH	0x0E	/* Serial Number Registers, 4 bytes */
+#define ADXRS450_SNL	0x10
+#define ADXRS450_DNC1	0x12	/* Dynamic Null Correction Registers */
+/* Check bits */
+#define ADXRS450_P	0x01
+#define ADXRS450_CHK	0x02
+#define ADXRS450_CST	0x04
+#define ADXRS450_PWR	0x08
+#define ADXRS450_POR	0x10
+#define ADXRS450_NVM	0x20
+#define ADXRS450_Q	0x40
+#define ADXRS450_PLL	0x80
+#define ADXRS450_UV	0x100
+#define ADXRS450_OV	0x200
+#define ADXRS450_AMP	0x400
+#define ADXRS450_FAIL	0x800
+
+#define ADXRS450_WRERR_MASK	(0x7 << 29)
+
+#define ADXRS450_MAX_RX 4
+#define ADXRS450_MAX_TX 4
+
+#define ADXRS450_GET_ST(a)	((a >> 26) & 0x3)
+
+/**
+ * struct adxrs450_state - device instance specific data
+ * @us:			actual spi_device
+ * @indio_dev:		industrial I/O device structure
+ * @tx:			transmit buffer
+ * @rx:			recieve buffer
+ * @buf_lock:		mutex to protect tx and rx
+ **/
+struct adxrs450_state {
+	struct spi_device		*us;
+	struct iio_dev			*indio_dev;
+	u8				*tx;
+	u8				*rx;
+	struct mutex			buf_lock;
+};
+
+#endif /* SPI_ADXRS450_H_ */