net: stmmac: Uniformize the use of dma_init_* callbacks

Instead of relying on the GMAC version for choosing if we need to use
dma_init or dma_init_{rx/tx}_chan callback, lets uniformize this and
always use the dma_init_{rx/tx}_chan callbacks.

While at it, fix the use of dma_init_chan callback, which shall be
called for as many channels as the max of rx/tx channels.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c

@@ -276,17 +276,28 @@ static int sun8i_dwmac_dma_reset(void __iomem *ioaddr)
  * Called from stmmac via stmmac_dma_ops->init
  */
 static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
-				 struct stmmac_dma_cfg *dma_cfg,
-				 u32 dma_tx, u32 dma_rx, int atds)
+				 struct stmmac_dma_cfg *dma_cfg, int atds)
 {
-	/* Write TX and RX descriptors address */
-	writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST);
-	writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST);
-
 	writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
 	writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
 }
 
+static void sun8i_dwmac_dma_init_rx(void __iomem *ioaddr,
+				    struct stmmac_dma_cfg *dma_cfg,
+				    u32 dma_rx_phy, u32 chan)
+{
+	/* Write RX descriptors address */
+	writel(dma_rx_phy, ioaddr + EMAC_RX_DESC_LIST);
+}
+
+static void sun8i_dwmac_dma_init_tx(void __iomem *ioaddr,
+				    struct stmmac_dma_cfg *dma_cfg,
+				    u32 dma_tx_phy, u32 chan)
+{
+	/* Write TX descriptors address */
+	writel(dma_tx_phy, ioaddr + EMAC_TX_DESC_LIST);
+}
+
 /* sun8i_dwmac_dump_regs() - Dump EMAC address space
  * Called from stmmac_dma_ops->dump_regs
  * Used for ethtool
@@ -492,6 +503,8 @@ static void sun8i_dwmac_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
 static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
 	.reset = sun8i_dwmac_dma_reset,
 	.init = sun8i_dwmac_dma_init,
+	.init_rx_chan = sun8i_dwmac_dma_init_rx,
+	.init_tx_chan = sun8i_dwmac_dma_init_tx,
 	.dump_regs = sun8i_dwmac_dump_regs,
 	.dma_rx_mode = sun8i_dwmac_dma_operation_mode_rx,
 	.dma_tx_mode = sun8i_dwmac_dma_operation_mode_tx,

drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c

@@ -81,8 +81,7 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 }
 
 static void dwmac1000_dma_init(void __iomem *ioaddr,
-			       struct stmmac_dma_cfg *dma_cfg,
-			       u32 dma_tx, u32 dma_rx, int atds)
+			       struct stmmac_dma_cfg *dma_cfg, int atds)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);
 	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
@@ -119,12 +118,22 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 
 	/* Mask interrupts by writing to CSR7 */
 	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
 
-	/* RX/TX descriptor base address lists must be written into
-	 * DMA CSR3 and CSR4, respectively
-	 */
-	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
-	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
+				  struct stmmac_dma_cfg *dma_cfg,
+				  u32 dma_rx_phy, u32 chan)
+{
+	/* RX descriptor base address list must be written into DMA CSR3 */
+	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+}
+
+static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
+				  struct stmmac_dma_cfg *dma_cfg,
+				  u32 dma_tx_phy, u32 chan)
+{
+	/* TX descriptor base address list must be written into DMA CSR4 */
+	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
 }
 
 static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
@@ -264,6 +273,8 @@ static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
 const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.reset = dwmac_dma_reset,
 	.init = dwmac1000_dma_init,
+	.init_rx_chan = dwmac1000_dma_init_rx,
+	.init_tx_chan = dwmac1000_dma_init_tx,
 	.axi = dwmac1000_dma_axi,
 	.dump_regs = dwmac1000_dump_dma_regs,
 	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,

drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c

@@ -29,8 +29,7 @@
 #include "dwmac_dma.h"
 
 static void dwmac100_dma_init(void __iomem *ioaddr,
-			      struct stmmac_dma_cfg *dma_cfg,
-			      u32 dma_tx, u32 dma_rx, int atds)
+			      struct stmmac_dma_cfg *dma_cfg, int atds)
 {
 	/* Enable Application Access by writing to DMA CSR0 */
 	writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
@@ -38,12 +37,22 @@ static void dwmac100_dma_init(void __iomem *ioaddr,
 
 	/* Mask interrupts by writing to CSR7 */
 	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
 
-	/* RX/TX descriptor base addr lists must be written into
-	 * DMA CSR3 and CSR4, respectively
-	 */
-	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
-	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+static void dwmac100_dma_init_rx(void __iomem *ioaddr,
+				 struct stmmac_dma_cfg *dma_cfg,
+				 u32 dma_rx_phy, u32 chan)
+{
+	/* RX descriptor base addr lists must be written into DMA CSR3 */
+	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+}
+
+static void dwmac100_dma_init_tx(void __iomem *ioaddr,
+				 struct stmmac_dma_cfg *dma_cfg,
+				 u32 dma_tx_phy, u32 chan)
+{
+	/* TX descriptor base addr lists must be written into DMA CSR4 */
+	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
 }
 
 /* Store and Forward capability is not used at all.
@@ -112,6 +121,8 @@ static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
 const struct stmmac_dma_ops dwmac100_dma_ops = {
 	.reset = dwmac_dma_reset,
 	.init = dwmac100_dma_init,
+	.init_rx_chan = dwmac100_dma_init_rx,
+	.init_tx_chan = dwmac100_dma_init_tx,
 	.dump_regs = dwmac100_dump_dma_regs,
 	.dma_tx_mode = dwmac100_dma_operation_mode_tx,
 	.dma_diagnostic_fr = dwmac100_dma_diagnostic_fr,

drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c

@@ -120,8 +120,7 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr,
 }
 
 static void dwmac4_dma_init(void __iomem *ioaddr,
-			    struct stmmac_dma_cfg *dma_cfg,
-			    u32 dma_tx, u32 dma_rx, int atds)
+			    struct stmmac_dma_cfg *dma_cfg, int atds)
 {
 	u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
 

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -140,7 +140,7 @@ struct stmmac_dma_ops {
 	/* DMA core initialization */
 	int (*reset)(void __iomem *ioaddr);
 	void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
-		     u32 dma_tx, u32 dma_rx, int atds);
+		     int atds);
 	void (*init_chan)(void __iomem *ioaddr,
 			  struct stmmac_dma_cfg *dma_cfg, u32 chan);
 	void (*init_rx_chan)(void __iomem *ioaddr,

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -2138,10 +2138,9 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 {
 	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	u32 dma_csr_ch = max(rx_channels_count, tx_channels_count);
 	struct stmmac_rx_queue *rx_q;
 	struct stmmac_tx_queue *tx_q;
-	u32 dummy_dma_rx_phy = 0;
-	u32 dummy_dma_tx_phy = 0;
 	u32 chan = 0;
 	int atds = 0;
 	int ret = 0;
@@ -2160,18 +2159,12 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 		return ret;
 	}
 
-	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-		/* DMA Configuration */
-		stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg,
-				dummy_dma_tx_phy, dummy_dma_rx_phy, atds);
-
 	/* DMA RX Channel Configuration */
 	for (chan = 0; chan < rx_channels_count; chan++) {
 		rx_q = &priv->rx_queue[chan];
 
-			stmmac_init_rx_chan(priv, priv->ioaddr,
-					priv->plat->dma_cfg, rx_q->dma_rx_phy,
-					chan);
+		stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+				    rx_q->dma_rx_phy, chan);
 
 		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
 			    (DMA_RX_SIZE * sizeof(struct dma_desc));
@@ -2183,24 +2176,21 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 	for (chan = 0; chan < tx_channels_count; chan++) {
 		tx_q = &priv->tx_queue[chan];
 
-			stmmac_init_chan(priv, priv->ioaddr,
-					priv->plat->dma_cfg, chan);
-
-			stmmac_init_tx_chan(priv, priv->ioaddr,
-					priv->plat->dma_cfg, tx_q->dma_tx_phy,
-					chan);
+		stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+				    tx_q->dma_tx_phy, chan);
 
 		tx_q->tx_tail_addr = tx_q->dma_tx_phy +
 			    (DMA_TX_SIZE * sizeof(struct dma_desc));
 		stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
 				       tx_q->tx_tail_addr, chan);
 	}
-	} else {
-		rx_q = &priv->rx_queue[chan];
-		tx_q = &priv->tx_queue[chan];
-		stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg,
-				tx_q->dma_tx_phy, rx_q->dma_rx_phy, atds);
-	}
+
+	/* DMA CSR Channel configuration */
+	for (chan = 0; chan < dma_csr_ch; chan++)
+		stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan);
+
+	/* DMA Configuration */
+	stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds);
 
 	if (priv->plat->axi)
 		stmmac_axi(priv, priv->ioaddr, priv->plat->axi);