Commit 252b8efe authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Ben Dooks

ARM: S5PC100: Use common functions for gpiolib implementation

GPIOlib helpers from plat-samsung already have functions for accessing
4bit gpio banks. This patch removes the duplicated functions from
plat-s5pc1xx/gpiolib.c.
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent cb34a674
......@@ -19,6 +19,7 @@ config PLAT_S5PC1XX
select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
select SAMSUNG_GPIOLIB_4BIT
help
Base platform code for any Samsung S5PC1XX device
......
......@@ -61,74 +61,6 @@
* L3 8 4Bit None
*/
#define OFF_GPCON (0x00)
#define OFF_GPDAT (0x04)
#define con_4bit_shift(__off) ((__off) * 4)
#if 1
#define gpio_dbg(x...) do { } while (0)
#else
#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif
/* The s5pc1xx_gpiolib routines are to control the gpio banks where
* the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
* following example:
*
* base + 0x00: Control register, 4 bits per gpio
* gpio n: 4 bits starting at (4*n)
* 0000 = input, 0001 = output, others mean special-function
* base + 0x04: Data register, 1 bit per gpio
* bit n: data bit n
*
* Note, since the data register is one bit per gpio and is at base + 0x4
* we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
* the output.
*/
static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long con;
con = __raw_readl(base + OFF_GPCON);
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, base + OFF_GPCON);
gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
return 0;
}
static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long con;
unsigned long dat;
con = __raw_readl(base + OFF_GPCON);
con &= ~(0xf << con_4bit_shift(offset));
con |= 0x1 << con_4bit_shift(offset);
dat = __raw_readl(base + OFF_GPDAT);
if (value)
dat |= 1 << offset;
else
dat &= ~(1 << offset);
__raw_writel(dat, base + OFF_GPDAT);
__raw_writel(con, base + OFF_GPCON);
__raw_writel(dat, base + OFF_GPDAT);
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
return 0;
}
static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
{
return S3C_IRQ_GPIO(chip->base + offset);
......@@ -452,11 +384,8 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
extern struct irq_chip s5pc1xx_gpioint;
extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = s5pc1xx_gpiolib_input;
chip->chip.direction_output = s5pc1xx_gpiolib_output;
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
/* Interrupt */
if (chip->config == &gpio_cfg) {
......@@ -475,26 +404,19 @@ static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
}
static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
int nr_chips,
void (*fn)(struct s3c_gpio_chip *))
{
for (; nr_chips > 0; nr_chips--, chips++) {
if (fn)
(fn)(chips);
s3c_gpiolib_add(chips);
}
}
static __init int s5pc1xx_gpiolib_init(void)
{
struct s3c_gpio_chip *chips;
struct s3c_gpio_chip *chip;
int nr_chips;
chips = s5pc100_gpio_chips;
chip = s5pc100_gpio_chips;
nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
for (; nr_chips > 0; nr_chips--, chip++)
s5pc100_gpiolib_link(chip);
samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
ARRAY_SIZE(s5pc100_gpio_chips));
/* Interrupt */
set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment