serial: remove quot_frac from serial8250_do_set_divisor()

quot_frac is unused in serial8250_do_set_divisor() since commit
b2b4b8ed (serial: 8250_exar: Move custom divisor support out from
8250_port). So no point to pass it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240805102046.307511-5-jirislaby@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_dwlib.c

@@ -89,7 +89,7 @@ static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
 			       unsigned int quot, unsigned int quot_frac)
 {
 	dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
-	serial8250_do_set_divisor(p, baud, quot, quot_frac);
+	serial8250_do_set_divisor(p, baud, quot);
 }
 
 void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios,

drivers/tty/serial/8250/8250_exar.c

@@ -500,7 +500,7 @@ static unsigned int xr17v35x_get_divisor(struct uart_port *p, unsigned int baud,
 static void xr17v35x_set_divisor(struct uart_port *p, unsigned int baud,
 				 unsigned int quot, unsigned int quot_frac)
 {
-	serial8250_do_set_divisor(p, baud, quot, quot_frac);
+	serial8250_do_set_divisor(p, baud, quot);
 
 	/* Preserve bits not related to baudrate; DLD[7:4]. */
 	quot_frac |= serial_port_in(p, 0x2) & 0xf0;

drivers/tty/serial/8250/8250_pci.c

@@ -1277,7 +1277,7 @@ static void pci_oxsemi_tornado_set_divisor(struct uart_port *port,
 	serial_icr_write(up, UART_TCR, tcr);
 	serial_icr_write(up, UART_CPR, cpr);
 	serial_icr_write(up, UART_CKS, cpr2);
-	serial8250_do_set_divisor(port, baud, quot, 0);
+	serial8250_do_set_divisor(port, baud, quot);
 }
 
 /*

drivers/tty/serial/8250/8250_port.c

@@ -2609,7 +2609,7 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
 }
 
 void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
-			       unsigned int quot, unsigned int quot_frac)
+			       unsigned int quot)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 
@@ -2641,7 +2641,7 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
 	if (port->set_divisor)
 		port->set_divisor(port, baud, quot, quot_frac);
 	else
-		serial8250_do_set_divisor(port, baud, quot, quot_frac);
+		serial8250_do_set_divisor(port, baud, quot);
 }
 
 static unsigned int serial8250_get_baud_rate(struct uart_port *port,

include/linux/serial_8250.h

@@ -193,7 +193,7 @@ void serial8250_do_pm(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate);
 void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
 void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
-			       unsigned int quot, unsigned int quot_frac);
+			       unsigned int quot);
 int fsl8250_handle_irq(struct uart_port *port);
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
 u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);