Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild

.gitignore

@@ -23,6 +23,7 @@ Module.symvers
 # Generated include files
 #
 include/asm
+include/asm-*/asm-offsets.h
 include/config
 include/linux/autoconf.h
 include/linux/compile.h

Documentation/kbuild/modules.txt

@@ -38,7 +38,7 @@ included in the kernel tree.
 What is covered within this file is mainly information to authors
 of modules. The author of an external modules should supply
 a makefile that hides most of the complexity so one only has to type
-'make' to buld the module. A complete example will be present in
+'make' to build the module. A complete example will be present in
 chapter ¤. Creating a kbuild file for an external module".
 
 
@@ -69,7 +69,7 @@ when building an external module.
 
 --- 2.2 Available targets
 
-	$KDIR refers to path to kernel source top-level directory
+	$KDIR refers to the path to the kernel source top-level directory
 
 	make -C $KDIR M=`pwd`
 		Will build the module(s) located in current directory.
@@ -87,11 +87,11 @@ when building an external module.
 	make -C $KDIR M=$PWD modules_install
 		Install the external module(s).
 		Installation default is in /lib/modules/<kernel-version>/extra,
-		but may be prefixed with INSTALL_MOD_PATH - see separate chater.
+		but may be prefixed with INSTALL_MOD_PATH - see separate chapter.
 
 	make -C $KDIR M=$PWD clean
 		Remove all generated files for the module - the kernel
-		source directory is not moddified.
+		source directory is not modified.
 
 	make -C $KDIR M=`pwd` help
 		help will list the available target when building external
@@ -99,7 +99,7 @@ when building an external module.
 
 --- 2.3 Available options:
 
-	$KDIR refer to path to kernel src
+	$KDIR refers to the path to the kernel source top-level directory
 
 	make -C $KDIR
 		Used to specify where to find the kernel source.
@@ -206,11 +206,11 @@ following files:
 
 		KERNELDIR := /lib/modules/`uname -r`/build
 		all::
-			$(MAKE) -C $KERNELDIR M=`pwd` $@
+			$(MAKE) -C $(KERNELDIR) M=`pwd` $@
 
 		# Module specific targets
 		genbin:
-			echo "X" > 8123_bini.o_shipped
+			echo "X" > 8123_bin.o_shipped
 
 		endif
 
@@ -341,13 +341,13 @@ directory and therefore needs to deal with this in their kbuild file.
 		EXTRA_CFLAGS := -Iinclude
 		8123-y := 8123_if.o 8123_pci.o 8123_bin.o
 
-	Note that in the assingment there is no space between -I and the path.
-	This is a kbuild limitation and no space must be present.
+	Note that in the assignment there is no space between -I and the path.
+	This is a kbuild limitation:  there must be no space present.
 
 
 === 6. Module installation
 
-Modules which are included in the kernel is installed in the directory:
+Modules which are included in the kernel are installed in the directory:
 
 	/lib/modules/$(KERNELRELEASE)/kernel
 
@@ -365,7 +365,7 @@ External modules are installed in the directory:
 		=> Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel
 
 	INSTALL_MOD_PATH may be set as an ordinary shell variable or as in the
-	example above be specified on the commandline when calling make.
+	example above be specified on the command line when calling make.
 	INSTALL_MOD_PATH has effect both when installing modules included in
 	the kernel as well as when installing external modules.
 
@@ -384,7 +384,7 @@ External modules are installed in the directory:
 
 === 7. Module versioning
 
-Module versioning are enabled by the CONFIG_MODVERSIONS tag.
+Module versioning is enabled by the CONFIG_MODVERSIONS tag.
 
 Module versioning is used as a simple ABI consistency check. The Module
 versioning creates a CRC value of the full prototype for an exported symbol and

Makefile

@@ -286,10 +286,6 @@ export quiet Q KBUILD_VERBOSE
 cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
              > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
 
-# For backward compatibility
-check_gcc = $(warning check_gcc is deprecated - use cc-option) \
-            $(call cc-option, $(1),$(2))
-
 # cc-option-yn
 # Usage: flag := $(call cc-option-yn, -march=winchip-c6)
 cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
@@ -481,18 +477,20 @@ ifeq ($(dot-config),1)
 
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
--include .config.cmd
+-include .kconfig.d
 
 include .config
 
 # If .config needs to be updated, it will be done via the dependency
 # that autoconf has on .config.
 # To avoid any implicit rule to kick in, define an empty command
-.config: ;
+.config .kconfig.d: ;
 
 # If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
+# with it and forgot to run make oldconfig.
+# If kconfig.d is missing then we are probarly in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/linux/autoconf.h: .kconfig.d .config
 	$(Q)mkdir -p include/linux
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
@@ -1066,7 +1064,7 @@ help:
 	@echo  '  all		  - Build all targets marked with [*]'
 	@echo  '* vmlinux	  - Build the bare kernel'
 	@echo  '* modules	  - Build all modules'
-	@echo  '  modules_install - Install all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.ko     - Build module including final link'
@@ -1240,7 +1238,10 @@ cscope: FORCE
 quiet_cmd_TAGS = MAKE   $@
 define cmd_TAGS
 	rm -f $@; \
-	ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
+	ETAGSF=`etags --version | grep -i exuberant >/dev/null &&     \
+                echo "-I __initdata,__exitdata,__acquires,__releases  \
+                      -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL              \
+                      --extra=+f --c-kinds=+px"`;                     \
                 $(all-sources) | xargs etags $$ETAGSF -a
 endef
 
@@ -1251,7 +1252,10 @@ TAGS: FORCE
 quiet_cmd_tags = MAKE   $@
 define cmd_tags
 	rm -f $@; \
-	CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
+	CTAGSF=`ctags --version | grep -i exuberant >/dev/null &&     \
+                echo "-I __initdata,__exitdata,__acquires,__releases  \
+                      -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL              \
+                      --extra=+f --c-kinds=+px"`;                     \
                 $(all-sources) | xargs ctags $$CTAGSF -a
 endef
 

arch/x86_64/boot/.gitignore

+bootsect
+bzImage
+setup

arch/x86_64/boot/tools/.gitignore

+build

arch/x86_64/ia32/.gitignore

+vsyscall*.so

drivers/char/.gitignore

 consolemap_deftbl.c
 defkeymap.c
-
+qtronixmap.c

drivers/ieee1394/.gitignore

+oui.c

drivers/md/.gitignore

+mktables
+raid6altivec*.c
+raid6int*.c
+raid6tables.c

drivers/net/wan/.gitignore

+wanxlfw.inc

drivers/scsi/.gitignore

+53c700_d.h
+53c7xx_d.h
+53c7xx_u.h

drivers/scsi/aic7xxx/.gitignore

+aic79xx_reg.h
+aic79xx_reg_print.c
+aic79xx_seq.h
+aic7xxx_reg.h
+aic7xxx_reg_print.c
+aic7xxx_seq.h

include/asm-mips/.gitignore

-asm_offsets.h

include/linux/spinlock.h

@@ -59,8 +59,7 @@
 /*
  * Must define these before including other files, inline functions need them
  */
-#define LOCK_SECTION_NAME                       \
-        ".text.lock." __stringify(KBUILD_BASENAME)
+#define LOCK_SECTION_NAME ".text.lock."KBUILD_BASENAME
 
 #define LOCK_SECTION_START(extra)               \
         ".subsection 1\n\t"                     \

init/Kconfig

@@ -461,8 +461,8 @@ config OBSOLETE_MODPARM
 	  If unsure, say Y.
 
 config MODVERSIONS
-	bool "Module versioning support (EXPERIMENTAL)"
-	depends on MODULES && EXPERIMENTAL
+	bool "Module versioning support"
+	depends on MODULES
 	help
 	  Usually, you have to use modules compiled with your kernel.
 	  Saying Y here makes it sometimes possible to use modules

kernel/.gitignore

+#
+# Generated files
+#
+config_data.h
+config_data.gz

scripts/.gitignore

+#
+# Generated files
+#
 conmakehash
 kallsyms
 pnmtologo
-
+bin2c

scripts/Makefile

@@ -19,4 +19,4 @@ subdir-$(CONFIG_MODVERSIONS) += genksyms
 subdir-$(CONFIG_MODULES)     += mod
 
 # Let clean descend into subdirs
-subdir-	+= basic lxdialog kconfig package
+subdir-	+= basic kconfig package

scripts/Makefile.lib

@@ -81,8 +81,10 @@ obj-dirs	:= $(addprefix $(obj)/,$(obj-dirs))
 # Note: It's possible that one object gets potentially linked into more
 #       than one module. In that case KBUILD_MODNAME will be set to foo_bar,
 #       where foo and bar are the name of the modules.
-basename_flags = -DKBUILD_BASENAME=$(subst $(comma),_,$(subst -,_,$(*F)))
-modname_flags  = $(if $(filter 1,$(words $(modname))),-DKBUILD_MODNAME=$(subst $(comma),_,$(subst -,_,$(modname))))
+name-fix = $(subst $(comma),_,$(subst -,_,$1))
+basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(*F)))"
+modname_flags  = $(if $(filter 1,$(words $(modname))),\
+                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
 
 _c_flags       = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o)
 _a_flags       = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
@@ -113,7 +115,7 @@ endif
 
 c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
 		 $(__c_flags) $(modkern_cflags) \
-		 $(basename_flags) $(modname_flags)
+		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
 
 a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
 		 $(__a_flags) $(modkern_aflags)

scripts/basic/fixdep.c

@@ -130,9 +130,22 @@ void usage(void)
 	exit(1);
 }
 
+/*
+ * Print out the commandline prefixed with cmd_<target filename> :=
+ * If commandline contains '#' escape with '\' so make to not see
+ * the '#' as a start-of-comment symbol
+ **/
 void print_cmdline(void)
 {
-	printf("cmd_%s := %s\n\n", target, cmdline);
+	char *p = cmdline;
+
+	printf("cmd_%s := ", target);
+	for (; *p; p++) {
+		if (*p == '#')
+			printf("\\");
+		printf("%c", *p);
+	}
+	printf("\n\n");
 }
 
 char * str_config  = NULL;

scripts/genksyms/.gitignore

+keywords.c
+lex.c
+parse.[ch]
+genksyms

scripts/genksyms/lex.c_shipped

@@ -2036,49 +2036,131 @@ fini:
 
   return token;
 }
-#ifndef YYSTYPE
-#define YYSTYPE int
-#endif
-#define	ASM_KEYW	257
-#define	ATTRIBUTE_KEYW	258
-#define	AUTO_KEYW	259
-#define	BOOL_KEYW	260
-#define	CHAR_KEYW	261
-#define	CONST_KEYW	262
-#define	DOUBLE_KEYW	263
-#define	ENUM_KEYW	264
-#define	EXTERN_KEYW	265
-#define	FLOAT_KEYW	266
-#define	INLINE_KEYW	267
-#define	INT_KEYW	268
-#define	LONG_KEYW	269
-#define	REGISTER_KEYW	270
-#define	RESTRICT_KEYW	271
-#define	SHORT_KEYW	272
-#define	SIGNED_KEYW	273
-#define	STATIC_KEYW	274
-#define	STRUCT_KEYW	275
-#define	TYPEDEF_KEYW	276
-#define	UNION_KEYW	277
-#define	UNSIGNED_KEYW	278
-#define	VOID_KEYW	279
-#define	VOLATILE_KEYW	280
-#define	TYPEOF_KEYW	281
-#define	EXPORT_SYMBOL_KEYW	282
-#define	ASM_PHRASE	283
-#define	ATTRIBUTE_PHRASE	284
-#define	BRACE_PHRASE	285
-#define	BRACKET_PHRASE	286
-#define	EXPRESSION_PHRASE	287
-#define	CHAR	288
-#define	DOTS	289
-#define	IDENT	290
-#define	INT	291
-#define	REAL	292
-#define	STRING	293
-#define	TYPE	294
-#define	OTHER	295
-#define	FILENAME	296
+/* A Bison parser, made by GNU Bison 2.0.  */
 
+/* Skeleton parser for Yacc-like parsing with Bison,
+   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* As a special exception, when this file is copied by Bison into a
+   Bison output file, you may use that output file without restriction.
+   This special exception was added by the Free Software Foundation
+   in version 1.24 of Bison.  */
+
+/* Tokens.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+   /* Put the tokens into the symbol table, so that GDB and other debuggers
+      know about them.  */
+   enum yytokentype {
+     ASM_KEYW = 258,
+     ATTRIBUTE_KEYW = 259,
+     AUTO_KEYW = 260,
+     BOOL_KEYW = 261,
+     CHAR_KEYW = 262,
+     CONST_KEYW = 263,
+     DOUBLE_KEYW = 264,
+     ENUM_KEYW = 265,
+     EXTERN_KEYW = 266,
+     FLOAT_KEYW = 267,
+     INLINE_KEYW = 268,
+     INT_KEYW = 269,
+     LONG_KEYW = 270,
+     REGISTER_KEYW = 271,
+     RESTRICT_KEYW = 272,
+     SHORT_KEYW = 273,
+     SIGNED_KEYW = 274,
+     STATIC_KEYW = 275,
+     STRUCT_KEYW = 276,
+     TYPEDEF_KEYW = 277,
+     UNION_KEYW = 278,
+     UNSIGNED_KEYW = 279,
+     VOID_KEYW = 280,
+     VOLATILE_KEYW = 281,
+     TYPEOF_KEYW = 282,
+     EXPORT_SYMBOL_KEYW = 283,
+     ASM_PHRASE = 284,
+     ATTRIBUTE_PHRASE = 285,
+     BRACE_PHRASE = 286,
+     BRACKET_PHRASE = 287,
+     EXPRESSION_PHRASE = 288,
+     CHAR = 289,
+     DOTS = 290,
+     IDENT = 291,
+     INT = 292,
+     REAL = 293,
+     STRING = 294,
+     TYPE = 295,
+     OTHER = 296,
+     FILENAME = 297
+   };
+#endif
+#define ASM_KEYW 258
+#define ATTRIBUTE_KEYW 259
+#define AUTO_KEYW 260
+#define BOOL_KEYW 261
+#define CHAR_KEYW 262
+#define CONST_KEYW 263
+#define DOUBLE_KEYW 264
+#define ENUM_KEYW 265
+#define EXTERN_KEYW 266
+#define FLOAT_KEYW 267
+#define INLINE_KEYW 268
+#define INT_KEYW 269
+#define LONG_KEYW 270
+#define REGISTER_KEYW 271
+#define RESTRICT_KEYW 272
+#define SHORT_KEYW 273
+#define SIGNED_KEYW 274
+#define STATIC_KEYW 275
+#define STRUCT_KEYW 276
+#define TYPEDEF_KEYW 277
+#define UNION_KEYW 278
+#define UNSIGNED_KEYW 279
+#define VOID_KEYW 280
+#define VOLATILE_KEYW 281
+#define TYPEOF_KEYW 282
+#define EXPORT_SYMBOL_KEYW 283
+#define ASM_PHRASE 284
+#define ATTRIBUTE_PHRASE 285
+#define BRACE_PHRASE 286
+#define BRACKET_PHRASE 287
+#define EXPRESSION_PHRASE 288
+#define CHAR 289
+#define DOTS 290
+#define IDENT 291
+#define INT 292
+#define REAL 293
+#define STRING 294
+#define TYPE 295
+#define OTHER 296
+#define FILENAME 297
+
+
+
+
+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
+typedef int YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
 
 extern YYSTYPE yylval;
+
+
+

scripts/genksyms/parse.h_shipped

-#ifndef YYSTYPE
-#define YYSTYPE int
+/* A Bison parser, made by GNU Bison 2.0.  */
+
+/* Skeleton parser for Yacc-like parsing with Bison,
+   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* As a special exception, when this file is copied by Bison into a
+   Bison output file, you may use that output file without restriction.
+   This special exception was added by the Free Software Foundation
+   in version 1.24 of Bison.  */
+
+/* Tokens.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+   /* Put the tokens into the symbol table, so that GDB and other debuggers
+      know about them.  */
+   enum yytokentype {
+     ASM_KEYW = 258,
+     ATTRIBUTE_KEYW = 259,
+     AUTO_KEYW = 260,
+     BOOL_KEYW = 261,
+     CHAR_KEYW = 262,
+     CONST_KEYW = 263,
+     DOUBLE_KEYW = 264,
+     ENUM_KEYW = 265,
+     EXTERN_KEYW = 266,
+     FLOAT_KEYW = 267,
+     INLINE_KEYW = 268,
+     INT_KEYW = 269,
+     LONG_KEYW = 270,
+     REGISTER_KEYW = 271,
+     RESTRICT_KEYW = 272,
+     SHORT_KEYW = 273,
+     SIGNED_KEYW = 274,
+     STATIC_KEYW = 275,
+     STRUCT_KEYW = 276,
+     TYPEDEF_KEYW = 277,
+     UNION_KEYW = 278,
+     UNSIGNED_KEYW = 279,
+     VOID_KEYW = 280,
+     VOLATILE_KEYW = 281,
+     TYPEOF_KEYW = 282,
+     EXPORT_SYMBOL_KEYW = 283,
+     ASM_PHRASE = 284,
+     ATTRIBUTE_PHRASE = 285,
+     BRACE_PHRASE = 286,
+     BRACKET_PHRASE = 287,
+     EXPRESSION_PHRASE = 288,
+     CHAR = 289,
+     DOTS = 290,
+     IDENT = 291,
+     INT = 292,
+     REAL = 293,
+     STRING = 294,
+     TYPE = 295,
+     OTHER = 296,
+     FILENAME = 297
+   };
 #endif
-#define	ASM_KEYW	257
-#define	ATTRIBUTE_KEYW	258
-#define	AUTO_KEYW	259
-#define	BOOL_KEYW	260
-#define	CHAR_KEYW	261
-#define	CONST_KEYW	262
-#define	DOUBLE_KEYW	263
-#define	ENUM_KEYW	264
-#define	EXTERN_KEYW	265
-#define	FLOAT_KEYW	266
-#define	INLINE_KEYW	267
-#define	INT_KEYW	268
-#define	LONG_KEYW	269
-#define	REGISTER_KEYW	270
-#define	RESTRICT_KEYW	271
-#define	SHORT_KEYW	272
-#define	SIGNED_KEYW	273
-#define	STATIC_KEYW	274
-#define	STRUCT_KEYW	275
-#define	TYPEDEF_KEYW	276
-#define	UNION_KEYW	277
-#define	UNSIGNED_KEYW	278
-#define	VOID_KEYW	279
-#define	VOLATILE_KEYW	280
-#define	TYPEOF_KEYW	281
-#define	EXPORT_SYMBOL_KEYW	282
-#define	ASM_PHRASE	283
-#define	ATTRIBUTE_PHRASE	284
-#define	BRACE_PHRASE	285
-#define	BRACKET_PHRASE	286
-#define	EXPRESSION_PHRASE	287
-#define	CHAR	288
-#define	DOTS	289
-#define	IDENT	290
-#define	INT	291
-#define	REAL	292
-#define	STRING	293
-#define	TYPE	294
-#define	OTHER	295
-#define	FILENAME	296
+#define ASM_KEYW 258
+#define ATTRIBUTE_KEYW 259
+#define AUTO_KEYW 260
+#define BOOL_KEYW 261
+#define CHAR_KEYW 262
+#define CONST_KEYW 263
+#define DOUBLE_KEYW 264
+#define ENUM_KEYW 265
+#define EXTERN_KEYW 266
+#define FLOAT_KEYW 267
+#define INLINE_KEYW 268
+#define INT_KEYW 269
+#define LONG_KEYW 270
+#define REGISTER_KEYW 271
+#define RESTRICT_KEYW 272
+#define SHORT_KEYW 273
+#define SIGNED_KEYW 274
+#define STATIC_KEYW 275
+#define STRUCT_KEYW 276
+#define TYPEDEF_KEYW 277
+#define UNION_KEYW 278
+#define UNSIGNED_KEYW 279
+#define VOID_KEYW 280
+#define VOLATILE_KEYW 281
+#define TYPEOF_KEYW 282
+#define EXPORT_SYMBOL_KEYW 283
+#define ASM_PHRASE 284
+#define ATTRIBUTE_PHRASE 285
+#define BRACE_PHRASE 286
+#define BRACKET_PHRASE 287
+#define EXPRESSION_PHRASE 288
+#define CHAR 289
+#define DOTS 290
+#define IDENT 291
+#define INT 292
+#define REAL 293
+#define STRING 294
+#define TYPE 295
+#define OTHER 296
+#define FILENAME 297
+
 
 
+
+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
+typedef int YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
 extern YYSTYPE yylval;
+
+
+

scripts/genksyms/parse.y

@@ -197,6 +197,7 @@ storage_class_specifier:
 type_specifier:
 	simple_type_specifier
 	| cvar_qualifier
+	| TYPEOF_KEYW '(' decl_specifier_seq '*' ')'
 	| TYPEOF_KEYW '(' decl_specifier_seq ')'
 
 	/* References to s/u/e's defined elsewhere.  Rearrange things

scripts/kconfig/.gitignore

@@ -5,6 +5,7 @@ config*
 lex.*.c
 *.tab.c
 *.tab.h
+zconf.hash.c
 
 #
 # configuration programs

scripts/kconfig/Makefile

@@ -11,7 +11,7 @@ gconfig: $(obj)/gconf
 	$< arch/$(ARCH)/Kconfig
 
 menuconfig: $(obj)/mconf
-	$(Q)$(MAKE) $(build)=scripts/lxdialog
+	$(Q)$(MAKE) $(build)=scripts/kconfig/lxdialog
 	$< arch/$(ARCH)/Kconfig
 
 config: $(obj)/conf
@@ -115,6 +115,7 @@ endif
 
 clean-files	:= lkc_defs.h qconf.moc .tmp_qtcheck \
 		   .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c
+subdir- += lxdialog
 
 # Needed for systems without gettext
 KBUILD_HAVE_NLS := $(shell \

scripts/kconfig/lxdialog/.gitignore

+#
+# Generated files
+#
+lxdialog

scripts/kconfig/lxdialog/checklist.c

+/*
+ *  checklist.c -- implements the checklist box
+ *
+ *  ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ *     Stuart Herbert - S.Herbert@sheffield.ac.uk: radiolist extension
+ *     Alessandro Rubini - rubini@ipvvis.unipv.it: merged the two
+ *  MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+static int list_width, check_x, item_x;
+
+/*
+ * Print list item
+ */
+static void print_item(WINDOW * win, const char *item, int status, int choice,
+		       int selected)
+{
+	int i;
+
+	/* Clear 'residue' of last item */
+	wattrset(win, menubox_attr);
+	wmove(win, choice, 0);
+	for (i = 0; i < list_width; i++)
+		waddch(win, ' ');
+
+	wmove(win, choice, check_x);
+	wattrset(win, selected ? check_selected_attr : check_attr);
+	wprintw(win, "(%c)", status ? 'X' : ' ');
+
+	wattrset(win, selected ? tag_selected_attr : tag_attr);
+	mvwaddch(win, choice, item_x, item[0]);
+	wattrset(win, selected ? item_selected_attr : item_attr);
+	waddstr(win, (char *)item + 1);
+	if (selected) {
+		wmove(win, choice, check_x + 1);
+		wrefresh(win);
+	}
+}
+
+/*
+ * Print the scroll indicators.
+ */
+static void print_arrows(WINDOW * win, int choice, int item_no, int scroll,
+	     int y, int x, int height)
+{
+	wmove(win, y, x);
+
+	if (scroll > 0) {
+		wattrset(win, uarrow_attr);
+		waddch(win, ACS_UARROW);
+		waddstr(win, "(-)");
+	} else {
+		wattrset(win, menubox_attr);
+		waddch(win, ACS_HLINE);
+		waddch(win, ACS_HLINE);
+		waddch(win, ACS_HLINE);
+		waddch(win, ACS_HLINE);
+	}
+
+	y = y + height + 1;
+	wmove(win, y, x);
+
+	if ((height < item_no) && (scroll + choice < item_no - 1)) {
+		wattrset(win, darrow_attr);
+		waddch(win, ACS_DARROW);
+		waddstr(win, "(+)");
+	} else {
+		wattrset(win, menubox_border_attr);
+		waddch(win, ACS_HLINE);
+		waddch(win, ACS_HLINE);
+		waddch(win, ACS_HLINE);
+		waddch(win, ACS_HLINE);
+	}
+}
+
+/*
+ *  Display the termination buttons
+ */
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
+{
+	int x = width / 2 - 11;
+	int y = height - 2;
+
+	print_button(dialog, "Select", y, x, selected == 0);
+	print_button(dialog, " Help ", y, x + 14, selected == 1);
+
+	wmove(dialog, y, x + 1 + 14 * selected);
+	wrefresh(dialog);
+}
+
+/*
+ * Display a dialog box with a list of options that can be turned on or off
+ * in the style of radiolist (only one option turned on at a time).
+ */
+int dialog_checklist(const char *title, const char *prompt, int height,
+		     int width, int list_height, int item_no,
+		     const char *const *items)
+{
+	int i, x, y, box_x, box_y;
+	int key = 0, button = 0, choice = 0, scroll = 0, max_choice, *status;
+	WINDOW *dialog, *list;
+
+	/* Allocate space for storing item on/off status */
+	if ((status = malloc(sizeof(int) * item_no)) == NULL) {
+		endwin();
+		fprintf(stderr,
+			"\nCan't allocate memory in dialog_checklist().\n");
+		exit(-1);
+	}
+
+	/* Initializes status */
+	for (i = 0; i < item_no; i++) {
+		status[i] = !strcasecmp(items[i * 3 + 2], "on");
+		if ((!choice && status[i])
+		    || !strcasecmp(items[i * 3 + 2], "selected"))
+			choice = i + 1;
+	}
+	if (choice)
+		choice--;
+
+	max_choice = MIN(list_height, item_no);
+
+	/* center dialog box on screen */
+	x = (COLS - width) / 2;
+	y = (LINES - height) / 2;
+
+	draw_shadow(stdscr, y, x, height, width);
+
+	dialog = newwin(height, width, y, x);
+	keypad(dialog, TRUE);
+
+	draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr);
+	wattrset(dialog, border_attr);
+	mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+	for (i = 0; i < width - 2; i++)
+		waddch(dialog, ACS_HLINE);
+	wattrset(dialog, dialog_attr);
+	waddch(dialog, ACS_RTEE);
+
+	print_title(dialog, title, width);
+
+	wattrset(dialog, dialog_attr);
+	print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+	list_width = width - 6;
+	box_y = height - list_height - 5;
+	box_x = (width - list_width) / 2 - 1;
+
+	/* create new window for the list */
+	list = subwin(dialog, list_height, list_width, y + box_y + 1,
+	              x + box_x + 1);
+
+	keypad(list, TRUE);
+
+	/* draw a box around the list items */
+	draw_box(dialog, box_y, box_x, list_height + 2, list_width + 2,
+	         menubox_border_attr, menubox_attr);
+
+	/* Find length of longest item in order to center checklist */
+	check_x = 0;
+	for (i = 0; i < item_no; i++)
+		check_x = MAX(check_x, +strlen(items[i * 3 + 1]) + 4);
+
+	check_x = (list_width - check_x) / 2;
+	item_x = check_x + 4;
+
+	if (choice >= list_height) {
+		scroll = choice - list_height + 1;
+		choice -= scroll;
+	}
+
+	/* Print the list */
+	for (i = 0; i < max_choice; i++) {
+		print_item(list, items[(scroll + i) * 3 + 1],
+			   status[i + scroll], i, i == choice);
+	}
+
+	print_arrows(dialog, choice, item_no, scroll,
+		     box_y, box_x + check_x + 5, list_height);
+
+	print_buttons(dialog, height, width, 0);
+
+	wnoutrefresh(list);
+	wnoutrefresh(dialog);
+	doupdate();
+
+	while (key != ESC) {
+		key = wgetch(dialog);
+
+		for (i = 0; i < max_choice; i++)
+			if (toupper(key) ==
+			    toupper(items[(scroll + i) * 3 + 1][0]))
+				break;
+
+		if (i < max_choice || key == KEY_UP || key == KEY_DOWN ||
+		    key == '+' || key == '-') {
+			if (key == KEY_UP || key == '-') {
+				if (!choice) {
+					if (!scroll)
+						continue;
+					/* Scroll list down */
+					if (list_height > 1) {
+						/* De-highlight current first item */
+						print_item(list, items[scroll * 3 + 1],
+							   status[scroll], 0, FALSE);
+						scrollok(list, TRUE);
+						wscrl(list, -1);
+						scrollok(list, FALSE);
+					}
+					scroll--;
+					print_item(list, items[scroll * 3 + 1], status[scroll], 0, TRUE);
+					wnoutrefresh(list);
+
+					print_arrows(dialog, choice, item_no,
+						     scroll, box_y, box_x + check_x + 5, list_height);
+
+					wrefresh(dialog);
+
+					continue;	/* wait for another key press */
+				} else
+					i = choice - 1;
+			} else if (key == KEY_DOWN || key == '+') {
+				if (choice == max_choice - 1) {
+					if (scroll + choice >= item_no - 1)
+						continue;
+					/* Scroll list up */
+					if (list_height > 1) {
+						/* De-highlight current last item before scrolling up */
+						print_item(list, items[(scroll + max_choice - 1) * 3 + 1],
+							   status[scroll + max_choice - 1],
+							   max_choice - 1, FALSE);
+						scrollok(list, TRUE);
+						wscrl(list, 1);
+						scrollok(list, FALSE);
+					}
+					scroll++;
+					print_item(list, items[(scroll + max_choice - 1) * 3 + 1],
+						   status[scroll + max_choice - 1], max_choice - 1, TRUE);
+					wnoutrefresh(list);
+
+					print_arrows(dialog, choice, item_no,
+						     scroll, box_y, box_x + check_x + 5, list_height);
+
+					wrefresh(dialog);
+
+					continue;	/* wait for another key press */
+				} else
+					i = choice + 1;
+			}
+			if (i != choice) {
+				/* De-highlight current item */
+				print_item(list, items[(scroll + choice) * 3 + 1],
+					   status[scroll + choice], choice, FALSE);
+				/* Highlight new item */
+				choice = i;
+				print_item(list, items[(scroll + choice) * 3 + 1],
+					   status[scroll + choice], choice, TRUE);
+				wnoutrefresh(list);
+				wrefresh(dialog);
+			}
+			continue;	/* wait for another key press */
+		}
+		switch (key) {
+		case 'H':
+		case 'h':
+		case '?':
+			fprintf(stderr, "%s", items[(scroll + choice) * 3]);
+			delwin(dialog);
+			free(status);
+			return 1;
+		case TAB:
+		case KEY_LEFT:
+		case KEY_RIGHT:
+			button = ((key == KEY_LEFT ? --button : ++button) < 0)
+			    ? 1 : (button > 1 ? 0 : button);
+
+			print_buttons(dialog, height, width, button);
+			wrefresh(dialog);
+			break;
+		case 'S':
+		case 's':
+		case ' ':
+		case '\n':
+			if (!button) {
+				if (!status[scroll + choice]) {
+					for (i = 0; i < item_no; i++)
+						status[i] = 0;
+					status[scroll + choice] = 1;
+					for (i = 0; i < max_choice; i++)
+						print_item(list, items[(scroll + i) * 3 + 1],
+							   status[scroll + i], i, i == choice);
+				}
+				wnoutrefresh(list);
+				wrefresh(dialog);
+
+				for (i = 0; i < item_no; i++)
+					if (status[i])
+						fprintf(stderr, "%s", items[i * 3]);
+			} else
+				fprintf(stderr, "%s", items[(scroll + choice) * 3]);
+			delwin(dialog);
+			free(status);
+			return button;
+		case 'X':
+		case 'x':
+			key = ESC;
+		case ESC:
+			break;
+		}
+
+		/* Now, update everything... */
+		doupdate();
+	}
+
+	delwin(dialog);
+	free(status);
+	return -1;		/* ESC pressed */
+}

scripts/lxdialog/colors.h → scripts/kconfig/lxdialog/colors.h

@@ -18,7 +18,6 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-
 /*
  *   Default color definitions
  *

scripts/lxdialog/dialog.h → scripts/kconfig/lxdialog/dialog.h

-
 /*
  *  dialog.h -- common declarations for all dialog modules
  *
@@ -42,7 +41,7 @@
 #if defined(NCURSES_VERSION) && defined(_NEED_WRAP) && !defined(GCC_PRINTFLIKE)
 #define OLD_NCURSES 1
 #undef  wbkgdset
-#define wbkgdset(w,p) /*nothing*/
+#define wbkgdset(w,p)		/*nothing */
 #else
 #define OLD_NCURSES 0
 #endif
@@ -56,7 +55,6 @@
 #define MIN(x,y) (x < y ? x : y)
 #define MAX(x,y) (x > y ? x : y)
 
-
 #ifndef ACS_ULCORNER
 #define ACS_ULCORNER '+'
 #endif
@@ -137,34 +135,34 @@ extern const char *backtitle;
 /*
  * Function prototypes
  */
-extern void create_rc (const char *filename);
-extern int parse_rc (void);
-
-
-void init_dialog (void);
-void end_dialog (void);
-void attr_clear (WINDOW * win, int height, int width, chtype attr);
-void dialog_clear (void);
-void color_setup (void);
-void print_autowrap (WINDOW * win, const char *prompt, int width, int y, int x);
-void print_button (WINDOW * win, const char *label, int y, int x, int selected);
-void draw_box (WINDOW * win, int y, int x, int height, int width, chtype box,
+extern void create_rc(const char *filename);
+extern int parse_rc(void);
+
+void init_dialog(void);
+void end_dialog(void);
+void attr_clear(WINDOW * win, int height, int width, chtype attr);
+void dialog_clear(void);
+void color_setup(void);
+void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x);
+void print_button(WINDOW * win, const char *label, int y, int x, int selected);
+void print_title(WINDOW *dialog, const char *title, int width);
+void draw_box(WINDOW * win, int y, int x, int height, int width, chtype box,
 	      chtype border);
-void draw_shadow (WINDOW * win, int y, int x, int height, int width);
+void draw_shadow(WINDOW * win, int y, int x, int height, int width);
 
-int first_alpha (const char *string, const char *exempt);
-int dialog_yesno (const char *title, const char *prompt, int height, int width);
-int dialog_msgbox (const char *title, const char *prompt, int height,
+int first_alpha(const char *string, const char *exempt);
+int dialog_yesno(const char *title, const char *prompt, int height, int width);
+int dialog_msgbox(const char *title, const char *prompt, int height,
 		  int width, int pause);
-int dialog_textbox (const char *title, const char *file, int height, int width);
-int dialog_menu (const char *title, const char *prompt, int height, int width,
+int dialog_textbox(const char *title, const char *file, int height, int width);
+int dialog_menu(const char *title, const char *prompt, int height, int width,
 		int menu_height, const char *choice, int item_no,
-		const char * const * items);
-int dialog_checklist (const char *title, const char *prompt, int height,
+		const char *const *items);
+int dialog_checklist(const char *title, const char *prompt, int height,
 		     int width, int list_height, int item_no,
-		const char * const * items, int flag);
+		     const char *const *items);
 extern char dialog_input_result[];
-int dialog_inputbox (const char *title, const char *prompt, int height,
+int dialog_inputbox(const char *title, const char *prompt, int height,
 		    int width, const char *init);
 
 /*
@@ -177,11 +175,3 @@ int dialog_inputbox (const char *title, const char *prompt, int height,
  *   -- uppercase chars are used to invoke the button (M_EVENT + 'O')
  */
 #define M_EVENT (KEY_MAX+1)
-
-
-/*
- * The `flag' parameter in checklist is used to select between
- * radiolist and checklist
- */
-#define FLAG_CHECK 1
-#define FLAG_RADIO 0

scripts/kconfig/lxdialog/inputbox.c

+/*
+ *  inputbox.c -- implements the input box
+ *
+ *  ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ *  MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+char dialog_input_result[MAX_LEN + 1];
+
+/*
+ *  Print the termination buttons
+ */
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
+{
+	int x = width / 2 - 11;
+	int y = height - 2;
+
+	print_button(dialog, "  Ok  ", y, x, selected == 0);
+	print_button(dialog, " Help ", y, x + 14, selected == 1);
+
+	wmove(dialog, y, x + 1 + 14 * selected);
+	wrefresh(dialog);
+}
+
+/*
+ * Display a dialog box for inputing a string
+ */
+int dialog_inputbox(const char *title, const char *prompt, int height, int width,
+                    const char *init)
+{
+	int i, x, y, box_y, box_x, box_width;
+	int input_x = 0, scroll = 0, key = 0, button = -1;
+	char *instr = dialog_input_result;
+	WINDOW *dialog;
+
+	/* center dialog box on screen */
+	x = (COLS - width) / 2;
+	y = (LINES - height) / 2;
+
+	draw_shadow(stdscr, y, x, height, width);
+
+	dialog = newwin(height, width, y, x);
+	keypad(dialog, TRUE);
+
+	draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr);
+	wattrset(dialog, border_attr);
+	mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+	for (i = 0; i < width - 2; i++)
+		waddch(dialog, ACS_HLINE);
+	wattrset(dialog, dialog_attr);
+	waddch(dialog, ACS_RTEE);
+
+	print_title(dialog, title, width);
+
+	wattrset(dialog, dialog_attr);
+	print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+	/* Draw the input field box */
+	box_width = width - 6;
+	getyx(dialog, y, x);
+	box_y = y + 2;
+	box_x = (width - box_width) / 2;
+	draw_box(dialog, y + 1, box_x - 1, 3, box_width + 2, border_attr, dialog_attr);
+
+	print_buttons(dialog, height, width, 0);
+
+	/* Set up the initial value */
+	wmove(dialog, box_y, box_x);
+	wattrset(dialog, inputbox_attr);
+
+	if (!init)
+		instr[0] = '\0';
+	else
+		strcpy(instr, init);
+
+	input_x = strlen(instr);
+
+	if (input_x >= box_width) {
+		scroll = input_x - box_width + 1;
+		input_x = box_width - 1;
+		for (i = 0; i < box_width - 1; i++)
+			waddch(dialog, instr[scroll + i]);
+	} else {
+		waddstr(dialog, instr);
+	}
+
+	wmove(dialog, box_y, box_x + input_x);
+
+	wrefresh(dialog);
+
+	while (key != ESC) {
+		key = wgetch(dialog);
+
+		if (button == -1) {	/* Input box selected */
+			switch (key) {
+			case TAB:
+			case KEY_UP:
+			case KEY_DOWN:
+				break;
+			case KEY_LEFT:
+				continue;
+			case KEY_RIGHT:
+				continue;
+			case KEY_BACKSPACE:
+			case 127:
+				if (input_x || scroll) {
+					wattrset(dialog, inputbox_attr);
+					if (!input_x) {
+						scroll = scroll < box_width - 1 ? 0 : scroll - (box_width - 1);
+						wmove(dialog, box_y, box_x);
+						for (i = 0; i < box_width; i++)
+							waddch(dialog,
+							       instr[scroll + input_x + i] ?
+							       instr[scroll + input_x + i] : ' ');
+						input_x = strlen(instr) - scroll;
+					} else
+						input_x--;
+					instr[scroll + input_x] = '\0';
+					mvwaddch(dialog, box_y, input_x + box_x, ' ');
+					wmove(dialog, box_y, input_x + box_x);
+					wrefresh(dialog);
+				}
+				continue;
+			default:
+				if (key < 0x100 && isprint(key)) {
+					if (scroll + input_x < MAX_LEN) {
+						wattrset(dialog, inputbox_attr);
+						instr[scroll + input_x] = key;
+						instr[scroll + input_x + 1] = '\0';
+						if (input_x == box_width - 1) {
+							scroll++;
+							wmove(dialog, box_y, box_x);
+							for (i = 0; i < box_width - 1; i++)
+								waddch(dialog, instr [scroll + i]);
+						} else {
+							wmove(dialog, box_y, input_x++ + box_x);
+							waddch(dialog, key);
+						}
+						wrefresh(dialog);
+					} else
+						flash();	/* Alarm user about overflow */
+					continue;
+				}
+			}
+		}
+		switch (key) {
+		case 'O':
+		case 'o':
+			delwin(dialog);
+			return 0;
+		case 'H':
+		case 'h':
+			delwin(dialog);
+			return 1;
+		case KEY_UP:
+		case KEY_LEFT:
+			switch (button) {
+			case -1:
+				button = 1;	/* Indicates "Cancel" button is selected */
+				print_buttons(dialog, height, width, 1);
+				break;
+			case 0:
+				button = -1;	/* Indicates input box is selected */
+				print_buttons(dialog, height, width, 0);
+				wmove(dialog, box_y, box_x + input_x);
+				wrefresh(dialog);
+				break;
+			case 1:
+				button = 0;	/* Indicates "OK" button is selected */
+				print_buttons(dialog, height, width, 0);
+				break;
+			}
+			break;
+		case TAB:
+		case KEY_DOWN:
+		case KEY_RIGHT:
+			switch (button) {
+			case -1:
+				button = 0;	/* Indicates "OK" button is selected */
+				print_buttons(dialog, height, width, 0);
+				break;
+			case 0:
+				button = 1;	/* Indicates "Cancel" button is selected */
+				print_buttons(dialog, height, width, 1);
+				break;
+			case 1:
+				button = -1;	/* Indicates input box is selected */
+				print_buttons(dialog, height, width, 0);
+				wmove(dialog, box_y, box_x + input_x);
+				wrefresh(dialog);
+				break;
+			}
+			break;
+		case ' ':
+		case '\n':
+			delwin(dialog);
+			return (button == -1 ? 0 : button);
+		case 'X':
+		case 'x':
+			key = ESC;
+		case ESC:
+			break;
+		}
+	}
+
+	delwin(dialog);
+	return -1;		/* ESC pressed */
+}

scripts/lxdialog/lxdialog.c → scripts/kconfig/lxdialog/lxdialog.c

@@ -21,9 +21,9 @@
 
 #include "dialog.h"
 
-static void Usage (const char *name);
+static void Usage(const char *name);
 
-typedef int (jumperFn) (const char *title, int argc, const char * const * argv);
+typedef int (jumperFn) (const char *title, int argc, const char *const *argv);
 
 struct Mode {
 	char *name;
@@ -31,16 +31,14 @@ struct Mode {
 	jumperFn *jumper;
 };
 
-jumperFn j_menu, j_checklist, j_radiolist, j_yesno, j_textbox, j_inputbox;
+jumperFn j_menu, j_radiolist, j_yesno, j_textbox, j_inputbox;
 jumperFn j_msgbox, j_infobox;
 
-static struct Mode modes[] =
-{
+static struct Mode modes[] = {
 	{"--menu", 9, 0, 3, j_menu},
-    {"--checklist", 9, 0, 3, j_checklist},
 	{"--radiolist", 9, 0, 3, j_radiolist},
-    {"--yesno",    5,5,1, j_yesno},
-    {"--textbox",  5,5,1, j_textbox},
+	{"--yesno", 5, 5, 1, j_yesno},
+	{"--textbox", 5, 5, 1, j_textbox},
 	{"--inputbox", 5, 6, 1, j_inputbox},
 	{"--msgbox", 5, 5, 1, j_msgbox},
 	{"--infobox", 5, 5, 1, j_infobox},
@@ -53,49 +51,48 @@ static struct Mode *modePtr;
 #include <locale.h>
 #endif
 
-int
-main (int argc, const char * const * argv)
+int main(int argc, const char *const *argv)
 {
 	int offset = 0, opt_clear = 0, end_common_opts = 0, retval;
 	const char *title = NULL;
 
 #ifdef LOCALE
-    (void) setlocale (LC_ALL, "");
+	(void)setlocale(LC_ALL, "");
 #endif
 
 #ifdef TRACE
-    trace(TRACE_CALLS|TRACE_UPDATE);
+	trace(TRACE_CALLS | TRACE_UPDATE);
 #endif
 	if (argc < 2) {
-	Usage (argv[0]);
-	exit (-1);
+		Usage(argv[0]);
+		exit(-1);
 	}
 
 	while (offset < argc - 1 && !end_common_opts) {	/* Common options */
-	if (!strcmp (argv[offset + 1], "--title")) {
+		if (!strcmp(argv[offset + 1], "--title")) {
 			if (argc - offset < 3 || title != NULL) {
-		Usage (argv[0]);
-		exit (-1);
+				Usage(argv[0]);
+				exit(-1);
 			} else {
 				title = argv[offset + 2];
 				offset += 2;
 			}
-        } else if (!strcmp (argv[offset + 1], "--backtitle")) {
+		} else if (!strcmp(argv[offset + 1], "--backtitle")) {
 			if (backtitle != NULL) {
-                Usage (argv[0]);
-                exit (-1);
+				Usage(argv[0]);
+				exit(-1);
 			} else {
 				backtitle = argv[offset + 2];
 				offset += 2;
 			}
-	} else if (!strcmp (argv[offset + 1], "--clear")) {
+		} else if (!strcmp(argv[offset + 1], "--clear")) {
 			if (opt_clear) {	/* Hey, "--clear" can't appear twice! */
-		Usage (argv[0]);
-		exit (-1);
+				Usage(argv[0]);
+				exit(-1);
 			} else if (argc == 2) {	/* we only want to clear the screen */
-		init_dialog ();
-		refresh ();	/* init_dialog() will clear the screen for us */
-		end_dialog ();
+				init_dialog();
+				refresh();	/* init_dialog() will clear the screen for us */
+				end_dialog();
 				return 0;
 			} else {
 				opt_clear = 1;
@@ -106,43 +103,40 @@ main (int argc, const char * const * argv)
 	}
 
 	if (argc - 1 == offset) {	/* no more options */
-	Usage (argv[0]);
-	exit (-1);
+		Usage(argv[0]);
+		exit(-1);
 	}
 	/* use a table to look for the requested mode, to avoid code duplication */
 
 	for (modePtr = modes; modePtr->name; modePtr++)	/* look for the mode */
-	if (!strcmp (argv[offset + 1], modePtr->name))
+		if (!strcmp(argv[offset + 1], modePtr->name))
 			break;
 
 	if (!modePtr->name)
-	Usage (argv[0]);
+		Usage(argv[0]);
 	if (argc - offset < modePtr->argmin)
-	Usage (argv[0]);
+		Usage(argv[0]);
 	if (modePtr->argmax && argc - offset > modePtr->argmax)
-	Usage (argv[0]);
-
-
+		Usage(argv[0]);
 
-    init_dialog ();
+	init_dialog();
 	retval = (*(modePtr->jumper)) (title, argc - offset, argv + offset);
 
 	if (opt_clear) {	/* clear screen before exit */
-	attr_clear (stdscr, LINES, COLS, screen_attr);
-	refresh ();
+		attr_clear(stdscr, LINES, COLS, screen_attr);
+		refresh();
 	}
 	end_dialog();
 
-    exit (retval);
+	exit(retval);
 }
 
 /*
  * Print program usage
  */
-static void
-Usage (const char *name)
+static void Usage(const char *name)
 {
-    fprintf (stderr, "\
+	fprintf(stderr, "\
 \ndialog, by Savio Lam (lam836@cs.cuhk.hk).\
 \n  patched by Stuart Herbert (S.Herbert@shef.ac.uk)\
 \n  modified/gutted for use as a Linux kernel config tool by \
@@ -156,71 +150,55 @@ Usage (const char *name)
 \nBox options:\
 \n\
 \n  --menu      <text> <height> <width> <menu height> <tag1> <item1>...\
-\n  --checklist <text> <height> <width> <list height> <tag1> <item1> <status1>...\
 \n  --radiolist <text> <height> <width> <list height> <tag1> <item1> <status1>...\
 \n  --textbox   <file> <height> <width>\
 \n  --inputbox  <text> <height> <width> [<init>]\
 \n  --yesno     <text> <height> <width>\
 \n", name, name);
-    exit (-1);
+	exit(-1);
 }
 
 /*
  * These are the program jumpers
  */
 
-int
-j_menu (const char *t, int ac, const char * const * av)
+int j_menu(const char *t, int ac, const char *const *av)
 {
-    return dialog_menu (t, av[2], atoi (av[3]), atoi (av[4]),
-			atoi (av[5]), av[6], (ac - 6) / 2, av + 7);
+	return dialog_menu(t, av[2], atoi(av[3]), atoi(av[4]),
+			   atoi(av[5]), av[6], (ac - 6) / 2, av + 7);
 }
 
-int
-j_checklist (const char *t, int ac, const char * const * av)
+int j_radiolist(const char *t, int ac, const char *const *av)
 {
-    return dialog_checklist (t, av[2], atoi (av[3]), atoi (av[4]),
-	atoi (av[5]), (ac - 6) / 3, av + 6, FLAG_CHECK);
+	return dialog_checklist(t, av[2], atoi(av[3]), atoi(av[4]),
+				atoi(av[5]), (ac - 6) / 3, av + 6);
 }
 
-int
-j_radiolist (const char *t, int ac, const char * const * av)
+int j_textbox(const char *t, int ac, const char *const *av)
 {
-    return dialog_checklist (t, av[2], atoi (av[3]), atoi (av[4]),
-	atoi (av[5]), (ac - 6) / 3, av + 6, FLAG_RADIO);
+	return dialog_textbox(t, av[2], atoi(av[3]), atoi(av[4]));
 }
 
-int
-j_textbox (const char *t, int ac, const char * const * av)
+int j_yesno(const char *t, int ac, const char *const *av)
 {
-    return dialog_textbox (t, av[2], atoi (av[3]), atoi (av[4]));
+	return dialog_yesno(t, av[2], atoi(av[3]), atoi(av[4]));
 }
 
-int
-j_yesno (const char *t, int ac, const char * const * av)
+int j_inputbox(const char *t, int ac, const char *const *av)
 {
-    return dialog_yesno (t, av[2], atoi (av[3]), atoi (av[4]));
-}
-
-int
-j_inputbox (const char *t, int ac, const char * const * av)
-{
-    int ret = dialog_inputbox (t, av[2], atoi (av[3]), atoi (av[4]),
-                            ac == 6 ? av[5] : (char *) NULL);
+	int ret = dialog_inputbox(t, av[2], atoi(av[3]), atoi(av[4]),
+				  ac == 6 ? av[5] : (char *)NULL);
 	if (ret == 0)
 		fprintf(stderr, dialog_input_result);
 	return ret;
 }
 
-int
-j_msgbox (const char *t, int ac, const char * const * av)
+int j_msgbox(const char *t, int ac, const char *const *av)
 {
-    return dialog_msgbox (t, av[2], atoi (av[3]), atoi (av[4]), 1);
+	return dialog_msgbox(t, av[2], atoi(av[3]), atoi(av[4]), 1);
 }
 
-int
-j_infobox (const char *t, int ac, const char * const * av)
+int j_infobox(const char *t, int ac, const char *const *av)
 {
-    return dialog_msgbox (t, av[2], atoi (av[3]), atoi (av[4]), 0);
+	return dialog_msgbox(t, av[2], atoi(av[3]), atoi(av[4]), 0);
 }
-

scripts/lxdialog/msgbox.c → scripts/kconfig/lxdialog/msgbox.c

@@ -25,8 +25,7 @@
  * Display a message box. Program will pause and display an "OK" button
  * if the parameter 'pause' is non-zero.
  */
-int
-dialog_msgbox (const char *title, const char *prompt, int height, int width,
+int dialog_msgbox(const char *title, const char *prompt, int height, int width,
                   int pause)
 {
 	int i, x, y, key = 0;
@@ -36,50 +35,37 @@ dialog_msgbox (const char *title, const char *prompt, int height, int width,
 	x = (COLS - width) / 2;
 	y = (LINES - height) / 2;
 
-    draw_shadow (stdscr, y, x, height, width);
+	draw_shadow(stdscr, y, x, height, width);
 
-    dialog = newwin (height, width, y, x);
-    keypad (dialog, TRUE);
+	dialog = newwin(height, width, y, x);
+	keypad(dialog, TRUE);
 
-    draw_box (dialog, 0, 0, height, width, dialog_attr, border_attr);
+	draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr);
 
-    if (title != NULL && strlen(title) >= width-2 ) {
-	/* truncate long title -- mec */
-	char * title2 = malloc(width-2+1);
-	memcpy( title2, title, width-2 );
-	title2[width-2] = '\0';
-	title = title2;
-    }
+	print_title(dialog, title, width);
 
-    if (title != NULL) {
-	wattrset (dialog, title_attr);
-	mvwaddch (dialog, 0, (width - strlen(title))/2 - 1, ' ');
-	waddstr (dialog, (char *)title);
-	waddch (dialog, ' ');
-    }
-    wattrset (dialog, dialog_attr);
-    print_autowrap (dialog, prompt, width - 2, 1, 2);
+	wattrset(dialog, dialog_attr);
+	print_autowrap(dialog, prompt, width - 2, 1, 2);
 
 	if (pause) {
-	wattrset (dialog, border_attr);
-	mvwaddch (dialog, height - 3, 0, ACS_LTEE);
+		wattrset(dialog, border_attr);
+		mvwaddch(dialog, height - 3, 0, ACS_LTEE);
 		for (i = 0; i < width - 2; i++)
-	    waddch (dialog, ACS_HLINE);
-	wattrset (dialog, dialog_attr);
-	waddch (dialog, ACS_RTEE);
+			waddch(dialog, ACS_HLINE);
+		wattrset(dialog, dialog_attr);
+		waddch(dialog, ACS_RTEE);
 
-	print_button (dialog, "  Ok  ",
-		      height - 2, width / 2 - 4, TRUE);
+		print_button(dialog, "  Ok  ", height - 2, width / 2 - 4, TRUE);
 
-	wrefresh (dialog);
+		wrefresh(dialog);
 		while (key != ESC && key != '\n' && key != ' ' &&
 		       key != 'O' && key != 'o' && key != 'X' && key != 'x')
-	    key = wgetch (dialog);
+			key = wgetch(dialog);
 	} else {
 		key = '\n';
-	wrefresh (dialog);
+		wrefresh(dialog);
 	}
 
-    delwin (dialog);
+	delwin(dialog);
 	return key == ESC ? -1 : 0;
 }

scripts/kconfig/lxdialog/util.c

+/*
+ *  util.c
+ *
+ *  ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ *  MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+/* use colors by default? */
+bool use_colors = 1;
+
+const char *backtitle = NULL;
+
+/*
+ * Attribute values, default is for mono display
+ */
+chtype attributes[] = {
+	A_NORMAL,		/* screen_attr */
+	A_NORMAL,		/* shadow_attr */
+	A_NORMAL,		/* dialog_attr */
+	A_BOLD,			/* title_attr */
+	A_NORMAL,		/* border_attr */
+	A_REVERSE,		/* button_active_attr */
+	A_DIM,			/* button_inactive_attr */
+	A_REVERSE,		/* button_key_active_attr */
+	A_BOLD,			/* button_key_inactive_attr */
+	A_REVERSE,		/* button_label_active_attr */
+	A_NORMAL,		/* button_label_inactive_attr */
+	A_NORMAL,		/* inputbox_attr */
+	A_NORMAL,		/* inputbox_border_attr */
+	A_NORMAL,		/* searchbox_attr */
+	A_BOLD,			/* searchbox_title_attr */
+	A_NORMAL,		/* searchbox_border_attr */
+	A_BOLD,			/* position_indicator_attr */
+	A_NORMAL,		/* menubox_attr */
+	A_NORMAL,		/* menubox_border_attr */
+	A_NORMAL,		/* item_attr */
+	A_REVERSE,		/* item_selected_attr */
+	A_BOLD,			/* tag_attr */
+	A_REVERSE,		/* tag_selected_attr */
+	A_BOLD,			/* tag_key_attr */
+	A_REVERSE,		/* tag_key_selected_attr */
+	A_BOLD,			/* check_attr */
+	A_REVERSE,		/* check_selected_attr */
+	A_BOLD,			/* uarrow_attr */
+	A_BOLD			/* darrow_attr */
+};
+
+#include "colors.h"
+
+/*
+ * Table of color values
+ */
+int color_table[][3] = {
+	{SCREEN_FG, SCREEN_BG, SCREEN_HL},
+	{SHADOW_FG, SHADOW_BG, SHADOW_HL},
+	{DIALOG_FG, DIALOG_BG, DIALOG_HL},
+	{TITLE_FG, TITLE_BG, TITLE_HL},
+	{BORDER_FG, BORDER_BG, BORDER_HL},
+	{BUTTON_ACTIVE_FG, BUTTON_ACTIVE_BG, BUTTON_ACTIVE_HL},
+	{BUTTON_INACTIVE_FG, BUTTON_INACTIVE_BG, BUTTON_INACTIVE_HL},
+	{BUTTON_KEY_ACTIVE_FG, BUTTON_KEY_ACTIVE_BG, BUTTON_KEY_ACTIVE_HL},
+	{BUTTON_KEY_INACTIVE_FG, BUTTON_KEY_INACTIVE_BG,
+	 BUTTON_KEY_INACTIVE_HL},
+	{BUTTON_LABEL_ACTIVE_FG, BUTTON_LABEL_ACTIVE_BG,
+	 BUTTON_LABEL_ACTIVE_HL},
+	{BUTTON_LABEL_INACTIVE_FG, BUTTON_LABEL_INACTIVE_BG,
+	 BUTTON_LABEL_INACTIVE_HL},
+	{INPUTBOX_FG, INPUTBOX_BG, INPUTBOX_HL},
+	{INPUTBOX_BORDER_FG, INPUTBOX_BORDER_BG, INPUTBOX_BORDER_HL},
+	{SEARCHBOX_FG, SEARCHBOX_BG, SEARCHBOX_HL},
+	{SEARCHBOX_TITLE_FG, SEARCHBOX_TITLE_BG, SEARCHBOX_TITLE_HL},
+	{SEARCHBOX_BORDER_FG, SEARCHBOX_BORDER_BG, SEARCHBOX_BORDER_HL},
+	{POSITION_INDICATOR_FG, POSITION_INDICATOR_BG, POSITION_INDICATOR_HL},
+	{MENUBOX_FG, MENUBOX_BG, MENUBOX_HL},
+	{MENUBOX_BORDER_FG, MENUBOX_BORDER_BG, MENUBOX_BORDER_HL},
+	{ITEM_FG, ITEM_BG, ITEM_HL},
+	{ITEM_SELECTED_FG, ITEM_SELECTED_BG, ITEM_SELECTED_HL},
+	{TAG_FG, TAG_BG, TAG_HL},
+	{TAG_SELECTED_FG, TAG_SELECTED_BG, TAG_SELECTED_HL},
+	{TAG_KEY_FG, TAG_KEY_BG, TAG_KEY_HL},
+	{TAG_KEY_SELECTED_FG, TAG_KEY_SELECTED_BG, TAG_KEY_SELECTED_HL},
+	{CHECK_FG, CHECK_BG, CHECK_HL},
+	{CHECK_SELECTED_FG, CHECK_SELECTED_BG, CHECK_SELECTED_HL},
+	{UARROW_FG, UARROW_BG, UARROW_HL},
+	{DARROW_FG, DARROW_BG, DARROW_HL},
+};				/* color_table */
+
+/*
+ * Set window to attribute 'attr'
+ */
+void attr_clear(WINDOW * win, int height, int width, chtype attr)
+{
+	int i, j;
+
+	wattrset(win, attr);
+	for (i = 0; i < height; i++) {
+		wmove(win, i, 0);
+		for (j = 0; j < width; j++)
+			waddch(win, ' ');
+	}
+	touchwin(win);
+}
+
+void dialog_clear(void)
+{
+	attr_clear(stdscr, LINES, COLS, screen_attr);
+	/* Display background title if it exists ... - SLH */
+	if (backtitle != NULL) {
+		int i;
+
+		wattrset(stdscr, screen_attr);
+		mvwaddstr(stdscr, 0, 1, (char *)backtitle);
+		wmove(stdscr, 1, 1);
+		for (i = 1; i < COLS - 1; i++)
+			waddch(stdscr, ACS_HLINE);
+	}
+	wnoutrefresh(stdscr);
+}
+
+/*
+ * Do some initialization for dialog
+ */
+void init_dialog(void)
+{
+	initscr();		/* Init curses */
+	keypad(stdscr, TRUE);
+	cbreak();
+	noecho();
+
+	if (use_colors)		/* Set up colors */
+		color_setup();
+
+	dialog_clear();
+}
+
+/*
+ * Setup for color display
+ */
+void color_setup(void)
+{
+	int i;
+
+	if (has_colors()) {	/* Terminal supports color? */
+		start_color();
+
+		/* Initialize color pairs */
+		for (i = 0; i < ATTRIBUTE_COUNT; i++)
+			init_pair(i + 1, color_table[i][0], color_table[i][1]);
+
+		/* Setup color attributes */
+		for (i = 0; i < ATTRIBUTE_COUNT; i++)
+			attributes[i] = C_ATTR(color_table[i][2], i + 1);
+	}
+}
+
+/*
+ * End using dialog functions.
+ */
+void end_dialog(void)
+{
+	endwin();
+}
+
+/* Print the title of the dialog. Center the title and truncate
+ * tile if wider than dialog (- 2 chars).
+ **/
+void print_title(WINDOW *dialog, const char *title, int width)
+{
+	if (title) {
+		int tlen = MIN(width - 2, strlen(title));
+		wattrset(dialog, title_attr);
+		mvwaddch(dialog, 0, (width - tlen) / 2 - 1, ' ');
+		mvwaddnstr(dialog, 0, (width - tlen)/2, title, tlen);
+		waddch(dialog, ' ');
+	}
+}
+
+/*
+ * Print a string of text in a window, automatically wrap around to the
+ * next line if the string is too long to fit on one line. Newline
+ * characters '\n' are replaced by spaces.  We start on a new line
+ * if there is no room for at least 4 nonblanks following a double-space.
+ */
+void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x)
+{
+	int newl, cur_x, cur_y;
+	int i, prompt_len, room, wlen;
+	char tempstr[MAX_LEN + 1], *word, *sp, *sp2;
+
+	strcpy(tempstr, prompt);
+
+	prompt_len = strlen(tempstr);
+
+	/*
+	 * Remove newlines
+	 */
+	for (i = 0; i < prompt_len; i++) {
+		if (tempstr[i] == '\n')
+			tempstr[i] = ' ';
+	}
+
+	if (prompt_len <= width - x * 2) {	/* If prompt is short */
+		wmove(win, y, (width - prompt_len) / 2);
+		waddstr(win, tempstr);
+	} else {
+		cur_x = x;
+		cur_y = y;
+		newl = 1;
+		word = tempstr;
+		while (word && *word) {
+			sp = index(word, ' ');
+			if (sp)
+				*sp++ = 0;
+
+			/* Wrap to next line if either the word does not fit,
+			   or it is the first word of a new sentence, and it is
+			   short, and the next word does not fit. */
+			room = width - cur_x;
+			wlen = strlen(word);
+			if (wlen > room ||
+			    (newl && wlen < 4 && sp
+			     && wlen + 1 + strlen(sp) > room
+			     && (!(sp2 = index(sp, ' '))
+				 || wlen + 1 + (sp2 - sp) > room))) {
+				cur_y++;
+				cur_x = x;
+			}
+			wmove(win, cur_y, cur_x);
+			waddstr(win, word);
+			getyx(win, cur_y, cur_x);
+			cur_x++;
+			if (sp && *sp == ' ') {
+				cur_x++;	/* double space */
+				while (*++sp == ' ') ;
+				newl = 1;
+			} else
+				newl = 0;
+			word = sp;
+		}
+	}
+}
+
+/*
+ * Print a button
+ */
+void print_button(WINDOW * win, const char *label, int y, int x, int selected)
+{
+	int i, temp;
+
+	wmove(win, y, x);
+	wattrset(win, selected ? button_active_attr : button_inactive_attr);
+	waddstr(win, "<");
+	temp = strspn(label, " ");
+	label += temp;
+	wattrset(win, selected ? button_label_active_attr
+		 : button_label_inactive_attr);
+	for (i = 0; i < temp; i++)
+		waddch(win, ' ');
+	wattrset(win, selected ? button_key_active_attr
+		 : button_key_inactive_attr);
+	waddch(win, label[0]);
+	wattrset(win, selected ? button_label_active_attr
+		 : button_label_inactive_attr);
+	waddstr(win, (char *)label + 1);
+	wattrset(win, selected ? button_active_attr : button_inactive_attr);
+	waddstr(win, ">");
+	wmove(win, y, x + temp + 1);
+}
+
+/*
+ * Draw a rectangular box with line drawing characters
+ */
+void
+draw_box(WINDOW * win, int y, int x, int height, int width,
+	 chtype box, chtype border)
+{
+	int i, j;
+
+	wattrset(win, 0);
+	for (i = 0; i < height; i++) {
+		wmove(win, y + i, x);
+		for (j = 0; j < width; j++)
+			if (!i && !j)
+				waddch(win, border | ACS_ULCORNER);
+			else if (i == height - 1 && !j)
+				waddch(win, border | ACS_LLCORNER);
+			else if (!i && j == width - 1)
+				waddch(win, box | ACS_URCORNER);
+			else if (i == height - 1 && j == width - 1)
+				waddch(win, box | ACS_LRCORNER);
+			else if (!i)
+				waddch(win, border | ACS_HLINE);
+			else if (i == height - 1)
+				waddch(win, box | ACS_HLINE);
+			else if (!j)
+				waddch(win, border | ACS_VLINE);
+			else if (j == width - 1)
+				waddch(win, box | ACS_VLINE);
+			else
+				waddch(win, box | ' ');
+	}
+}
+
+/*
+ * Draw shadows along the right and bottom edge to give a more 3D look
+ * to the boxes
+ */
+void draw_shadow(WINDOW * win, int y, int x, int height, int width)
+{
+	int i;
+
+	if (has_colors()) {	/* Whether terminal supports color? */
+		wattrset(win, shadow_attr);
+		wmove(win, y + height, x + 2);
+		for (i = 0; i < width; i++)
+			waddch(win, winch(win) & A_CHARTEXT);
+		for (i = y + 1; i < y + height + 1; i++) {
+			wmove(win, i, x + width);
+			waddch(win, winch(win) & A_CHARTEXT);
+			waddch(win, winch(win) & A_CHARTEXT);
+		}
+		wnoutrefresh(win);
+	}
+}
+
+/*
+ *  Return the position of the first alphabetic character in a string.
+ */
+int first_alpha(const char *string, const char *exempt)
+{
+	int i, in_paren = 0, c;
+
+	for (i = 0; i < strlen(string); i++) {
+		c = tolower(string[i]);
+
+		if (strchr("<[(", c))
+			++in_paren;
+		if (strchr(">])", c) && in_paren > 0)
+			--in_paren;
+
+		if ((!in_paren) && isalpha(c) && strchr(exempt, c) == 0)
+			return i;
+	}
+
+	return 0;
+}

scripts/lxdialog/yesno.c → scripts/kconfig/lxdialog/yesno.c

@@ -24,24 +24,22 @@
 /*
  * Display termination buttons
  */
-static void
-print_buttons(WINDOW *dialog, int height, int width, int selected)
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
 {
 	int x = width / 2 - 10;
 	int y = height - 2;
 
-    print_button (dialog, " Yes ", y, x, selected == 0);
-    print_button (dialog, "  No  ", y, x + 13, selected == 1);
+	print_button(dialog, " Yes ", y, x, selected == 0);
+	print_button(dialog, "  No  ", y, x + 13, selected == 1);
 
-    wmove(dialog, y, x+1 + 13*selected );
-    wrefresh (dialog);
+	wmove(dialog, y, x + 1 + 13 * selected);
+	wrefresh(dialog);
 }
 
 /*
  * Display a dialog box with two buttons - Yes and No
  */
-int
-dialog_yesno (const char *title, const char *prompt, int height, int width)
+int dialog_yesno(const char *title, const char *prompt, int height, int width)
 {
 	int i, x, y, key = 0, button = 0;
 	WINDOW *dialog;
@@ -50,69 +48,55 @@ dialog_yesno (const char *title, const char *prompt, int height, int width)
 	x = (COLS - width) / 2;
 	y = (LINES - height) / 2;
 
-    draw_shadow (stdscr, y, x, height, width);
+	draw_shadow(stdscr, y, x, height, width);
 
-    dialog = newwin (height, width, y, x);
-    keypad (dialog, TRUE);
+	dialog = newwin(height, width, y, x);
+	keypad(dialog, TRUE);
 
-    draw_box (dialog, 0, 0, height, width, dialog_attr, border_attr);
-    wattrset (dialog, border_attr);
-    mvwaddch (dialog, height-3, 0, ACS_LTEE);
+	draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr);
+	wattrset(dialog, border_attr);
+	mvwaddch(dialog, height - 3, 0, ACS_LTEE);
 	for (i = 0; i < width - 2; i++)
-	waddch (dialog, ACS_HLINE);
-    wattrset (dialog, dialog_attr);
-    waddch (dialog, ACS_RTEE);
-
-    if (title != NULL && strlen(title) >= width-2 ) {
-	/* truncate long title -- mec */
-	char * title2 = malloc(width-2+1);
-	memcpy( title2, title, width-2 );
-	title2[width-2] = '\0';
-	title = title2;
-    }
+		waddch(dialog, ACS_HLINE);
+	wattrset(dialog, dialog_attr);
+	waddch(dialog, ACS_RTEE);
 
-    if (title != NULL) {
-	wattrset (dialog, title_attr);
-	mvwaddch (dialog, 0, (width - strlen(title))/2 - 1, ' ');
-	waddstr (dialog, (char *)title);
-	waddch (dialog, ' ');
-    }
+	print_title(dialog, title, width);
 
-    wattrset (dialog, dialog_attr);
-    print_autowrap (dialog, prompt, width - 2, 1, 3);
+	wattrset(dialog, dialog_attr);
+	print_autowrap(dialog, prompt, width - 2, 1, 3);
 
 	print_buttons(dialog, height, width, 0);
 
 	while (key != ESC) {
-	key = wgetch (dialog);
+		key = wgetch(dialog);
 		switch (key) {
 		case 'Y':
 		case 'y':
-	    delwin (dialog);
+			delwin(dialog);
 			return 0;
 		case 'N':
 		case 'n':
-	    delwin (dialog);
+			delwin(dialog);
 			return 1;
 
 		case TAB:
 		case KEY_LEFT:
 		case KEY_RIGHT:
-	    button = ((key == KEY_LEFT ? --button : ++button) < 0)
-			? 1 : (button > 1 ? 0 : button);
+			button = ((key == KEY_LEFT ? --button : ++button) < 0) ? 1 : (button > 1 ? 0 : button);
 
 			print_buttons(dialog, height, width, button);
-	    wrefresh (dialog);
+			wrefresh(dialog);
 			break;
 		case ' ':
 		case '\n':
-	    delwin (dialog);
+			delwin(dialog);
 			return button;
 		case ESC:
 			break;
 		}
 	}
 
-    delwin (dialog);
+	delwin(dialog);
 	return -1;		/* ESC pressed */
 }

scripts/kconfig/mconf.c

@@ -325,7 +325,7 @@ static void cprint_init(void)
 	memset(args, 0, sizeof(args));
 	indent = 0;
 	child_count = 0;
-	cprint("./scripts/lxdialog/lxdialog");
+	cprint("./scripts/kconfig/lxdialog/lxdialog");
 	cprint("--backtitle");
 	cprint(menu_backtitle);
 }

scripts/kconfig/util.c

@@ -33,7 +33,7 @@ int file_write_dep(const char *name)
 	FILE *out;
 
 	if (!name)
-		name = ".config.cmd";
+		name = ".kconfig.d";
 	out = fopen("..config.tmp", "w");
 	if (!out)
 		return 1;

scripts/lxdialog/inputbox.c

-/*
- *  inputbox.c -- implements the input box
- *
- *  ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
- *  MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "dialog.h"
-
-char dialog_input_result[MAX_LEN + 1];
-
-/*
- *  Print the termination buttons
- */
-static void
-print_buttons(WINDOW *dialog, int height, int width, int selected)
-{
-    int x = width / 2 - 11;
-    int y = height - 2;
-
-    print_button (dialog, "  Ok  ", y, x, selected==0);
-    print_button (dialog, " Help ", y, x + 14, selected==1);
-
-    wmove(dialog, y, x+1+14*selected);
-    wrefresh(dialog);
-}
-
-/*
- * Display a dialog box for inputing a string
- */
-int
-dialog_inputbox (const char *title, const char *prompt, int height, int width,
-		 const char *init)
-{
-    int i, x, y, box_y, box_x, box_width;
-    int input_x = 0, scroll = 0, key = 0, button = -1;
-    char *instr = dialog_input_result;
-    WINDOW *dialog;
-
-    /* center dialog box on screen */
-    x = (COLS - width) / 2;
-    y = (LINES - height) / 2;
-
-
-    draw_shadow (stdscr, y, x, height, width);
-
-    dialog = newwin (height, width, y, x);
-    keypad (dialog, TRUE);
-
-    draw_box (dialog, 0, 0, height, width, dialog_attr, border_attr);
-    wattrset (dialog, border_attr);
-    mvwaddch (dialog, height-3, 0, ACS_LTEE);
-    for (i = 0; i < width - 2; i++)
-	waddch (dialog, ACS_HLINE);
-    wattrset (dialog, dialog_attr);
-    waddch (dialog, ACS_RTEE);
-
-    if (title != NULL && strlen(title) >= width-2 ) {
-	/* truncate long title -- mec */
-	char * title2 = malloc(width-2+1);
-	memcpy( title2, title, width-2 );
-	title2[width-2] = '\0';
-	title = title2;
-    }
-
-    if (title != NULL) {
-	wattrset (dialog, title_attr);
-	mvwaddch (dialog, 0, (width - strlen(title))/2 - 1, ' ');
-	waddstr (dialog, (char *)title);
-	waddch (dialog, ' ');
-    }
-
-    wattrset (dialog, dialog_attr);
-    print_autowrap (dialog, prompt, width - 2, 1, 3);
-
-    /* Draw the input field box */
-    box_width = width - 6;
-    getyx (dialog, y, x);
-    box_y = y + 2;
-    box_x = (width - box_width) / 2;
-    draw_box (dialog, y + 1, box_x - 1, 3, box_width + 2,
-	      border_attr, dialog_attr);
-
-    print_buttons(dialog, height, width, 0);
-
-    /* Set up the initial value */
-    wmove (dialog, box_y, box_x);
-    wattrset (dialog, inputbox_attr);
-
-    if (!init)
-	instr[0] = '\0';
-    else
-	strcpy (instr, init);
-
-    input_x = strlen (instr);
-
-    if (input_x >= box_width) {
-	scroll = input_x - box_width + 1;
-	input_x = box_width - 1;
-	for (i = 0; i < box_width - 1; i++)
-	    waddch (dialog, instr[scroll + i]);
-    } else
-	waddstr (dialog, instr);
-
-    wmove (dialog, box_y, box_x + input_x);
-
-    wrefresh (dialog);
-
-    while (key != ESC) {
-	key = wgetch (dialog);
-
-	if (button == -1) {	/* Input box selected */
-	    switch (key) {
-	    case TAB:
-	    case KEY_UP:
-	    case KEY_DOWN:
-		break;
-	    case KEY_LEFT:
-		continue;
-	    case KEY_RIGHT:
-		continue;
-	    case KEY_BACKSPACE:
-	    case 127:
-		if (input_x || scroll) {
-		    wattrset (dialog, inputbox_attr);
-		    if (!input_x) {
-			scroll = scroll < box_width - 1 ?
-			    0 : scroll - (box_width - 1);
-			wmove (dialog, box_y, box_x);
-			for (i = 0; i < box_width; i++)
-			    waddch (dialog, instr[scroll + input_x + i] ?
-				    instr[scroll + input_x + i] : ' ');
-			input_x = strlen (instr) - scroll;
-		    } else
-			input_x--;
-		    instr[scroll + input_x] = '\0';
-		    mvwaddch (dialog, box_y, input_x + box_x, ' ');
-		    wmove (dialog, box_y, input_x + box_x);
-		    wrefresh (dialog);
-		}
-		continue;
-	    default:
-		if (key < 0x100 && isprint (key)) {
-		    if (scroll + input_x < MAX_LEN) {
-			wattrset (dialog, inputbox_attr);
-			instr[scroll + input_x] = key;
-			instr[scroll + input_x + 1] = '\0';
-			if (input_x == box_width - 1) {
-			    scroll++;
-			    wmove (dialog, box_y, box_x);
-			    for (i = 0; i < box_width - 1; i++)
-				waddch (dialog, instr[scroll + i]);
-			} else {
-			    wmove (dialog, box_y, input_x++ + box_x);
-			    waddch (dialog, key);
-			}
-			wrefresh (dialog);
-		    } else
-			flash ();	/* Alarm user about overflow */
-		    continue;
-		}
-	    }
-	}
-	switch (key) {
-	case 'O':
-	case 'o':
-	    delwin (dialog);
-	    return 0;
-	case 'H':
-	case 'h':
-	    delwin (dialog);
-	    return 1;
-	case KEY_UP:
-	case KEY_LEFT:
-	    switch (button) {
-	    case -1:
-		button = 1;	/* Indicates "Cancel" button is selected */
-		print_buttons(dialog, height, width, 1);
-		break;
-	    case 0:
-		button = -1;	/* Indicates input box is selected */
-		print_buttons(dialog, height, width, 0);
-		wmove (dialog, box_y, box_x + input_x);
-		wrefresh (dialog);
-		break;
-	    case 1:
-		button = 0;	/* Indicates "OK" button is selected */
-		print_buttons(dialog, height, width, 0);
-		break;
-	    }
-	    break;
-	case TAB:
-	case KEY_DOWN:
-	case KEY_RIGHT:
-	    switch (button) {
-	    case -1:
-		button = 0;	/* Indicates "OK" button is selected */
-		print_buttons(dialog, height, width, 0);
-		break;
-	    case 0:
-		button = 1;	/* Indicates "Cancel" button is selected */
-		print_buttons(dialog, height, width, 1);
-		break;
-	    case 1:
-		button = -1;	/* Indicates input box is selected */
-		print_buttons(dialog, height, width, 0);
-		wmove (dialog, box_y, box_x + input_x);
-		wrefresh (dialog);
-		break;
-	    }
-	    break;
-	case ' ':
-	case '\n':
-	    delwin (dialog);
-	    return (button == -1 ? 0 : button);
-	case 'X':
-	case 'x':
-	    key = ESC;
-	case ESC:
-	    break;
-	}
-    }
-
-    delwin (dialog);
-    return -1;			/* ESC pressed */
-}

scripts/mod/modpost.c

@@ -326,8 +326,8 @@ parse_elf_finish(struct elf_info *info)
 	release_file(info->hdr, info->size);
 }
 
-#define CRC_PFX     MODULE_SYMBOL_PREFIX "__crc_"
-#define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_"
+#define CRC_PFX     "__crc_"
+#define KSYMTAB_PFX "__ksymtab_"
 
 void
 handle_modversions(struct module *mod, struct elf_info *info,
@@ -539,10 +539,9 @@ add_header(struct buffer *b, struct module *mod)
 	buf_printf(b, "\n");
 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
 	buf_printf(b, "\n");
-	buf_printf(b, "#undef unix\n"); /* We have a module called "unix" */
 	buf_printf(b, "struct module __this_module\n");
 	buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
-	buf_printf(b, " .name = __stringify(KBUILD_MODNAME),\n");
+	buf_printf(b, " .name = KBUILD_MODNAME,\n");
 	if (mod->has_init)
 		buf_printf(b, " .init = init_module,\n");
 	if (mod->has_cleanup)

scripts/package/Makefile

@@ -84,7 +84,7 @@ clean-dirs += $(objtree)/debian/
 # ---------------------------------------------------------------------------
 .PHONY: tar%pkg
 tar%pkg:
-	$(MAKE)
+	$(MAKE) KBUILD_SRC=
 	$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
 
 clean-dirs += $(objtree)/tar-install/