arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation

When recently adding the missing 'regulator-allowed-modes' properties it appears that the binding example with its four-spaces indentation (corresponding to a single tab, which is still to little) was copied verbatim. Drop the unnecessary first line break after 'regulator-allowed-modes' properties and indent the single remaining continuation line properly. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org

arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation
When recently adding the missing 'regulator-allowed-modes' properties it appears that the binding example with its four-spaces indentation (corresponding to a single tab, which is still to little) was copied verbatim. Drop the unnecessary first line break after 'regulator-allowed-modes' properties and indent the single remaining continuation line properly. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org
25f08f02 · Johan Hovold · Bjorn Andersson · 7fa58dc9 · 25f08f02 · 25f08f02
Commit 25f08f02 authored Nov 16, 2022 by Johan Hovold Committed by Bjorn Andersson Dec 06, 2022
8 changed files
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -136,8 +136,7 @@ vreg_l5a_0p88: ldo5 {
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -154,8 +153,7 @@ vreg_l10a_2p96: ldo10 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -263,8 +261,7 @@ vreg_l5c_1p2: ldo5 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -281,8 +278,7 @@ vreg_l8c_1p2: ldo8 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};


--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -90,8 +90,7 @@ vreg_l3c: ldo3 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -108,8 +107,7 @@ vreg_l6c: ldo6 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -126,8 +124,7 @@ vreg_l10c: ldo10 {
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -137,8 +134,7 @@ vreg_l17c: ldo17 {
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};

--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -170,8 +170,7 @@ vreg_l7c: ldo7 {
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -195,8 +194,7 @@ vreg_l3d: ldo3 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};


--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -231,8 +231,7 @@ pm6150l_l6: ldo6 {
 			regulator-max-microvolt = <2950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;

 		};
@@ -254,8 +253,7 @@ pm6150l_l9: ldo9 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;

 		};

--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -282,8 +282,7 @@ vreg_l6e: ldo6 {
 			regulator-max-microvolt = <2950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-				<RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -304,8 +303,7 @@ vreg_l9e: ldo9 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-				<RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};


--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,8 +348,7 @@ vreg_l6c_2p9: ldo6 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -370,8 +369,7 @@ vreg_l9c_2p9: ldo9 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};


--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,8 +317,7 @@ vreg_l6c_2p9: ldo6 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -342,8 +341,7 @@ vreg_l9c_2p9: ldo9 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};


--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,8 +107,7 @@ vreg_l5b_0p88: ldo5 {
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -118,8 +117,7 @@ vreg_l6b_1p2: ldo6 {
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -129,8 +127,7 @@ vreg_l7b_2p96: ldo7 {
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};

@@ -140,8 +137,7 @@ vreg_l9b_1p2: ldo9 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-			regulator-allowed-modes =
-			    <RPMH_REGULATOR_MODE_LPM
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};