Commit 26a7e06d authored by Simon Horman's avatar Simon Horman

arm64: renesas: r8a7795: Add Renesas R8A7795 SoC support

Initial version of Renesas R-Car H3 support (V10)
Signed-off-by: default avatarGaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarMagnus Damm <damm+renesas@opensource.se>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Acked-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent 8005c49d
...@@ -27,6 +27,8 @@ SoCs: ...@@ -27,6 +27,8 @@ SoCs:
compatible = "renesas,r8a7793" compatible = "renesas,r8a7793"
- R-Car E2 (R8A77940) - R-Car E2 (R8A77940)
compatible = "renesas,r8a7794" compatible = "renesas,r8a7794"
- R-Car H3 (R8A77950)
compatible = "renesas,r8a7795"
Boards: Boards:
......
...@@ -67,6 +67,23 @@ config ARCH_SEATTLE ...@@ -67,6 +67,23 @@ config ARCH_SEATTLE
help help
This enables support for AMD Seattle SOC Family This enables support for AMD Seattle SOC Family
config ARCH_SHMOBILE
bool
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select ARCH_SHMOBILE
select PINCTRL
select PM_GENERIC_DOMAINS if PM
help
This enables support for the ARMv8 based Renesas SoCs.
config ARCH_R8A7795
bool "Renesas R-Car H3 SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car H3 SoC.
config ARCH_STRATIX10 config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family" bool "Altera's Stratix 10 SoCFPGA Family"
help help
......
...@@ -10,6 +10,7 @@ dts-dirs += hisilicon ...@@ -10,6 +10,7 @@ dts-dirs += hisilicon
dts-dirs += marvell dts-dirs += marvell
dts-dirs += mediatek dts-dirs += mediatek
dts-dirs += qcom dts-dirs += qcom
dts-dirs += renesas
dts-dirs += rockchip dts-dirs += rockchip
dts-dirs += sprd dts-dirs += sprd
dts-dirs += xilinx dts-dirs += xilinx
......
always := $(dtb-y)
clean-files := *.dtb
/*
* Device Tree Source for the r8a7795 SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "renesas,r8a7795";
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
/* 1 core only at this point */
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
};
};
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@0xf1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0xf1010000 0 0x1000>,
<0x0 0xf1020000 0 0x2000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7795-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk>, <&extalr_clk>;
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment