Commit 2741049e authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

parents 2a298a35 4d5cda06
......@@ -1636,6 +1636,15 @@ L: ldm-devel@lists.sourceforge.net
W: http://ldm.sourceforge.net
S: Maintained
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
P: Eric Moore
M: Eric.Moore@lsil.com
M: support@lsil.com
L: mpt_linux_developer@lsil.com
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
P: Matthew Wilcox
M: matthew@wil.cx
......
......@@ -1118,6 +1118,65 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
return -1;
}
int
mpt_alt_ioc_wait(MPT_ADAPTER *ioc)
{
int loop_count = 30 * 4; /* Wait 30 seconds */
int status = -1; /* -1 means failed to get board READY */
do {
spin_lock(&ioc->initializing_hba_lock);
if (ioc->initializing_hba_lock_flag == 0) {
ioc->initializing_hba_lock_flag=1;
spin_unlock(&ioc->initializing_hba_lock);
status = 0;
break;
}
spin_unlock(&ioc->initializing_hba_lock);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ/4);
} while (--loop_count);
return status;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_bringup_adapter - This is a wrapper function for mpt_do_ioc_recovery
* @ioc: Pointer to MPT adapter structure
* @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
*
* This routine performs all the steps necessary to bring the IOC
* to a OPERATIONAL state.
*
* Special Note: This function was added with spin lock's so as to allow
* the dv(domain validation) work thread to succeed on the other channel
* that maybe occuring at the same time when this function is called.
* Without this lock, the dv would fail when message frames were
* requested during hba bringup on the alternate ioc.
*/
static int
mpt_bringup_adapter(MPT_ADAPTER *ioc, int sleepFlag)
{
int r;
if(ioc->alt_ioc) {
if((r=mpt_alt_ioc_wait(ioc->alt_ioc)!=0))
return r;
}
r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
CAN_SLEEP);
if(ioc->alt_ioc) {
spin_lock(&ioc->alt_ioc->initializing_hba_lock);
ioc->alt_ioc->initializing_hba_lock_flag=0;
spin_unlock(&ioc->alt_ioc->initializing_hba_lock);
}
return r;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_attach - Install a PCI intelligent MPT adapter.
......@@ -1186,6 +1245,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
*/
......@@ -1408,8 +1468,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
*/
mpt_detect_bound_ports(ioc, pdev);
if ((r = mpt_do_ioc_recovery(ioc,
MPT_HOSTEVENT_IOC_BRINGUP, CAN_SLEEP)) != 0) {
if ((r = mpt_bringup_adapter(ioc, CAN_SLEEP)) != 0){
printk(KERN_WARNING MYNAM
": WARNING - %s did not initialize properly! (%d)\n",
ioc->name, r);
......@@ -6298,6 +6357,7 @@ EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
EXPORT_SYMBOL(mpt_alt_ioc_wait);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
......
......@@ -611,6 +611,8 @@ typedef struct _MPT_ADAPTER
int DoneCtx;
int TaskCtx;
int InternalCtx;
spinlock_t initializing_hba_lock;
int initializing_hba_lock_flag;
struct list_head list;
struct net_device *netdev;
struct list_head sas_topology;
......@@ -1001,6 +1003,7 @@ extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
extern int mpt_alt_ioc_wait(MPT_ADAPTER *ioc);
/*
* Public data decl's...
......
......@@ -4162,6 +4162,12 @@ mptscsih_domainValidation(void *arg)
}
}
if(mpt_alt_ioc_wait(hd->ioc)!=0) {
ddvprintk((MYIOC_s_WARN_FMT "alt_ioc busy!\n",
hd->ioc->name));
continue;
}
if (mptscsih_doDv(hd, 0, id) == 1) {
/* Untagged device was busy, try again
*/
......@@ -4173,6 +4179,10 @@ mptscsih_domainValidation(void *arg)
hd->ioc->spi_data.dvStatus[id] &= ~(MPT_SCSICFG_DV_NOT_DONE | MPT_SCSICFG_DV_PENDING);
}
spin_lock(&hd->ioc->initializing_hba_lock);
hd->ioc->initializing_hba_lock_flag=0;
spin_unlock(&hd->ioc->initializing_hba_lock);
if (isPhysDisk) {
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
if (hd->ioc->raid_data.isRaid & (1 << ii)) {
......
......@@ -996,6 +996,20 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
spin_lock_init(&adapter->fsf_req_list_lock);
INIT_LIST_HEAD(&adapter->fsf_req_list_head);
/* initialize debug locks */
spin_lock_init(&adapter->erp_dbf_lock);
spin_lock_init(&adapter->hba_dbf_lock);
spin_lock_init(&adapter->san_dbf_lock);
spin_lock_init(&adapter->scsi_dbf_lock);
/* initialize error recovery stuff */
rwlock_init(&adapter->erp_lock);
sema_init(&adapter->erp_ready_sem, 0);
INIT_LIST_HEAD(&adapter->erp_ready_head);
INIT_LIST_HEAD(&adapter->erp_running_head);
/* initialize abort lock */
rwlock_init(&adapter->abort_lock);
......
......@@ -926,7 +926,6 @@ int zfcp_adapter_debug_register(struct zfcp_adapter *adapter)
char dbf_name[DEBUG_MAX_NAME_LEN];
/* debug feature area which records recovery activity */
spin_lock_init(&adapter->erp_dbf_lock);
sprintf(dbf_name, "zfcp_%s_erp", zfcp_get_busid_by_adapter(adapter));
adapter->erp_dbf = debug_register(dbf_name, dbfsize, 2,
sizeof(struct zfcp_erp_dbf_record));
......@@ -936,7 +935,6 @@ int zfcp_adapter_debug_register(struct zfcp_adapter *adapter)
debug_set_level(adapter->erp_dbf, 3);
/* debug feature area which records HBA (FSF and QDIO) conditions */
spin_lock_init(&adapter->hba_dbf_lock);
sprintf(dbf_name, "zfcp_%s_hba", zfcp_get_busid_by_adapter(adapter));
adapter->hba_dbf = debug_register(dbf_name, dbfsize, 1,
sizeof(struct zfcp_hba_dbf_record));
......@@ -947,7 +945,6 @@ int zfcp_adapter_debug_register(struct zfcp_adapter *adapter)
debug_set_level(adapter->hba_dbf, 3);
/* debug feature area which records SAN command failures and recovery */
spin_lock_init(&adapter->san_dbf_lock);
sprintf(dbf_name, "zfcp_%s_san", zfcp_get_busid_by_adapter(adapter));
adapter->san_dbf = debug_register(dbf_name, dbfsize, 1,
sizeof(struct zfcp_san_dbf_record));
......@@ -958,7 +955,6 @@ int zfcp_adapter_debug_register(struct zfcp_adapter *adapter)
debug_set_level(adapter->san_dbf, 6);
/* debug feature area which records SCSI command failures and recovery */
spin_lock_init(&adapter->scsi_dbf_lock);
sprintf(dbf_name, "zfcp_%s_scsi", zfcp_get_busid_by_adapter(adapter));
adapter->scsi_dbf = debug_register(dbf_name, dbfsize, 1,
sizeof(struct zfcp_scsi_dbf_record));
......
......@@ -1071,11 +1071,6 @@ zfcp_erp_thread_setup(struct zfcp_adapter *adapter)
atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status);
rwlock_init(&adapter->erp_lock);
INIT_LIST_HEAD(&adapter->erp_ready_head);
INIT_LIST_HEAD(&adapter->erp_running_head);
sema_init(&adapter->erp_ready_sem, 0);
retval = kernel_thread(zfcp_erp_thread, adapter, SIGCHLD);
if (retval < 0) {
ZFCP_LOG_NORMAL("error: creation of erp thread failed for "
......@@ -2248,29 +2243,26 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action)
return retval;
}
/*
* function: zfcp_fsf_init
*
* purpose: initializes FSF operation for the specified adapter
*
* returns: 0 - succesful initialization of FSF operation
* !0 - failed to initialize FSF operation
*/
static int
zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *erp_action)
{
int xconfig, xport;
int retval;
if (atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&erp_action->adapter->status)) {
if ((atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&erp_action->adapter->status)) &&
(erp_action->adapter->adapter_features &
FSF_FEATURE_HBAAPI_MANAGEMENT)) {
zfcp_erp_adapter_strategy_open_fsf_xport(erp_action);
atomic_set(&erp_action->adapter->erp_counter, 0);
return ZFCP_ERP_FAILED;
}
xconfig = zfcp_erp_adapter_strategy_open_fsf_xconfig(erp_action);
xport = zfcp_erp_adapter_strategy_open_fsf_xport(erp_action);
if ((xconfig == ZFCP_ERP_FAILED) || (xport == ZFCP_ERP_FAILED))
retval = zfcp_erp_adapter_strategy_open_fsf_xconfig(erp_action);
if (retval == ZFCP_ERP_FAILED)
return ZFCP_ERP_FAILED;
retval = zfcp_erp_adapter_strategy_open_fsf_xport(erp_action);
if (retval == ZFCP_ERP_FAILED)
return ZFCP_ERP_FAILED;
return zfcp_erp_adapter_strategy_open_fsf_statusread(erp_action);
......@@ -2359,41 +2351,29 @@ zfcp_erp_adapter_strategy_open_fsf_xconfig(struct zfcp_erp_action *erp_action)
static int
zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action)
{
int retval = ZFCP_ERP_SUCCEEDED;
int ret;
int retries;
int sleep;
struct zfcp_adapter *adapter = erp_action->adapter;
atomic_clear_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status);
for (retries = 0; ; retries++) {
ZFCP_LOG_DEBUG("Doing exchange port data\n");
retries = 0;
do {
write_lock(&adapter->erp_lock);
zfcp_erp_action_to_running(erp_action);
write_unlock(&adapter->erp_lock);
zfcp_erp_timeout_init(erp_action);
if (zfcp_fsf_exchange_port_data(erp_action, adapter, NULL)) {
retval = ZFCP_ERP_FAILED;
debug_text_event(adapter->erp_dbf, 5, "a_fstx_xf");
ZFCP_LOG_INFO("error: initiation of exchange of "
"port data failed for adapter %s\n",
zfcp_get_busid_by_adapter(adapter));
break;
ret = zfcp_fsf_exchange_port_data(erp_action, adapter, NULL);
if (ret == -EOPNOTSUPP) {
debug_text_event(adapter->erp_dbf, 3, "a_xport_notsupp");
return ZFCP_ERP_SUCCEEDED;
} else if (ret) {
debug_text_event(adapter->erp_dbf, 3, "a_xport_failed");
return ZFCP_ERP_FAILED;
}
debug_text_event(adapter->erp_dbf, 6, "a_fstx_xok");
ZFCP_LOG_DEBUG("Xchange underway\n");
debug_text_event(adapter->erp_dbf, 6, "a_xport_ok");
/*
* Why this works:
* Both the normal completion handler as well as the timeout
* handler will do an 'up' when the 'exchange port data'
* request completes or times out. Thus, the signal to go on
* won't be lost utilizing this semaphore.
* Furthermore, this 'adapter_reopen' action is
* guaranteed to be the only action being there (highest action
* which prevents other actions from being created).
* Resulting from that, the wake signal recognized here
* _must_ be the one belonging to the 'exchange port
* data' request.
*/
down(&adapter->erp_ready_sem);
if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT) {
ZFCP_LOG_INFO("error: exchange of port data "
......@@ -2401,29 +2381,19 @@ zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action)
zfcp_get_busid_by_adapter(adapter));
break;
}
if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&adapter->status))
break;
ZFCP_LOG_DEBUG("host connection still initialising... "
"waiting and retrying...\n");
/* sleep a little bit before retry */
sleep = retries < ZFCP_EXCHANGE_PORT_DATA_SHORT_RETRIES ?
ZFCP_EXCHANGE_PORT_DATA_SHORT_SLEEP :
ZFCP_EXCHANGE_PORT_DATA_LONG_SLEEP;
msleep(jiffies_to_msecs(sleep));
}
if (atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&adapter->status)) {
ZFCP_LOG_INFO("error: exchange of port data for "
"adapter %s failed\n",
zfcp_get_busid_by_adapter(adapter));
retval = ZFCP_ERP_FAILED;
}
if (retries < ZFCP_EXCHANGE_PORT_DATA_SHORT_RETRIES) {
sleep = ZFCP_EXCHANGE_PORT_DATA_SHORT_SLEEP;
retries++;
} else
sleep = ZFCP_EXCHANGE_PORT_DATA_LONG_SLEEP;
schedule_timeout(sleep);
} while (1);
return retval;
return ZFCP_ERP_SUCCEEDED;
}
/*
......
......@@ -554,6 +554,17 @@ static void
zfcp_fsf_link_down_info_eval(struct zfcp_adapter *adapter,
struct fsf_link_down_info *link_down)
{
if (atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&adapter->status))
return;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
if (link_down == NULL) {
zfcp_erp_adapter_reopen(adapter, 0);
return;
}
switch (link_down->error_code) {
case FSF_PSQ_LINK_NO_LIGHT:
ZFCP_LOG_NORMAL("The local link to adapter %s is down "
......@@ -634,10 +645,6 @@ zfcp_fsf_link_down_info_eval(struct zfcp_adapter *adapter,
link_down->explanation_code,
link_down->vendor_specific_code);
if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&adapter->status)) {
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
&adapter->status);
switch (link_down->error_code) {
case FSF_PSQ_LINK_NO_LIGHT:
case FSF_PSQ_LINK_WRAP_PLUG:
......@@ -648,7 +655,6 @@ zfcp_fsf_link_down_info_eval(struct zfcp_adapter *adapter,
default:
zfcp_erp_adapter_failed(adapter);
}
}
}
/*
......@@ -919,24 +925,30 @@ zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req)
case FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK:
ZFCP_LOG_INFO("Physical link to adapter %s is down\n",
zfcp_get_busid_by_adapter(adapter));
zfcp_fsf_link_down_info_eval(adapter,
(struct fsf_link_down_info *)
&status_buffer->payload);
break;
case FSF_STATUS_READ_SUB_FDISC_FAILED:
ZFCP_LOG_INFO("Local link to adapter %s is down "
"due to failed FDISC login\n",
zfcp_get_busid_by_adapter(adapter));
zfcp_fsf_link_down_info_eval(adapter,
(struct fsf_link_down_info *)
&status_buffer->payload);
break;
case FSF_STATUS_READ_SUB_FIRMWARE_UPDATE:
ZFCP_LOG_INFO("Local link to adapter %s is down "
"due to firmware update on adapter\n",
zfcp_get_busid_by_adapter(adapter));
zfcp_fsf_link_down_info_eval(adapter, NULL);
break;
default:
ZFCP_LOG_INFO("Local link to adapter %s is down "
"due to unknown reason\n",
zfcp_get_busid_by_adapter(adapter));
zfcp_fsf_link_down_info_eval(adapter, NULL);
};
zfcp_fsf_link_down_info_eval(adapter,
(struct fsf_link_down_info *) &status_buffer->payload);
break;
case FSF_STATUS_READ_LINK_UP:
......@@ -2191,13 +2203,10 @@ zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action,
return -EOPNOTSUPP;
}
timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
if (!timer)
return -ENOMEM;
/* setup new FSF request */
retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
0, 0, &lock_flags, &fsf_req);
erp_action ? ZFCP_REQ_AUTO_CLEANUP : 0,
0, &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Out of resources. Could not create an "
"exchange port data request for"
......@@ -2205,12 +2214,7 @@ zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action,
zfcp_get_busid_by_adapter(adapter));
write_unlock_irqrestore(&adapter->request_queue.queue_lock,
lock_flags);
goto out;
}
if (erp_action) {
erp_action->fsf_req = fsf_req;
fsf_req->erp_action = erp_action;
return retval;
}
if (data)
......@@ -2220,10 +2224,23 @@ zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action,
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
if (erp_action) {
erp_action->fsf_req = fsf_req;
fsf_req->erp_action = erp_action;
timer = &erp_action->timer;
} else {
timer = kmalloc(sizeof(struct timer_list), GFP_ATOMIC);
if (!timer) {
write_unlock_irqrestore(&adapter->request_queue.queue_lock,
lock_flags);
zfcp_fsf_req_free(fsf_req);
return -ENOMEM;
}
init_timer(timer);
timer->function = zfcp_fsf_request_timeout_handler;
timer->data = (unsigned long) adapter;
timer->expires = ZFCP_FSF_REQUEST_TIMEOUT;
}
retval = zfcp_fsf_req_send(fsf_req, timer);
if (retval) {
......@@ -2233,23 +2250,22 @@ zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action,
zfcp_fsf_req_free(fsf_req);
if (erp_action)
erp_action->fsf_req = NULL;
else
kfree(timer);
write_unlock_irqrestore(&adapter->request_queue.queue_lock,
lock_flags);
goto out;
return retval;
}
ZFCP_LOG_DEBUG("Exchange Port Data request initiated (adapter %s)\n",
zfcp_get_busid_by_adapter(adapter));
write_unlock_irqrestore(&adapter->request_queue.queue_lock,
lock_flags);
write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
if (!erp_action) {
wait_event(fsf_req->completion_wq,
fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
del_timer_sync(timer);
zfcp_fsf_req_free(fsf_req);
out:
kfree(timer);
}
return retval;
}
......
......@@ -179,7 +179,7 @@ zfcp_scsi_slave_alloc(struct scsi_device *sdp)
struct zfcp_adapter *adapter;
struct zfcp_unit *unit;
unsigned long flags;
int retval = -ENODEV;
int retval = -ENXIO;
adapter = (struct zfcp_adapter *) sdp->host->hostdata[0];
if (!adapter)
......
......@@ -325,6 +325,8 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
* translations ( 64/32, 128/32, 255/63 ).
*/
buf = scsi_bios_ptable(bdev);
if (!buf)
return 0;
if(*(__le16 *)(buf + 0x40) == cpu_to_le16(0xaa55)) {
struct partition *first = (struct partition * )buf;
struct partition *entry = first;
......
......@@ -2105,7 +2105,7 @@ ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
scmd_id(cmd),
scmd_channel(cmd) + 'A',
CAM_LUN_WILDCARD,
SCB_LIST_NULL, ROLE_INITIATOR) == 0)
SCB_LIST_NULL, ROLE_INITIATOR))
break;
}
}
......
......@@ -2169,7 +2169,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
if (ahc_match_scb(ahc, pending_scb, scmd_id(cmd),
scmd_channel(cmd) + 'A',
CAM_LUN_WILDCARD,
SCB_LIST_NULL, ROLE_INITIATOR) == 0)
SCB_LIST_NULL, ROLE_INITIATOR))
break;
}
}
......
......@@ -812,12 +812,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
return;
/* see if the device has an echo buffer. If it does we can
* do the SPI pattern write tests */
len = 0;
if (scsi_device_dt(sdev))
len = spi_dv_device_get_echo_buffer(sdev, buffer);
/* len == -1 is the signal that we need to ascertain the
* presence of an echo buffer before trying to use it. len ==
* 0 means we don't have an echo buffer */
len = -1;
retry:
......@@ -840,11 +838,23 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
if (spi_min_period(starget) == 8)
DV_SET(pcomp_en, 1);
}
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);
/* See if we actually managed to negotiate and sustain DT */
if (i->f->get_dt)
i->f->get_dt(starget);
if (len == 0) {
/* see if the device has an echo buffer. If it does we can do
* the SPI pattern write tests. Because of some broken
* devices, we *only* try this on a device that has actually
* negotiated DT */
if (len == -1 && spi_dt(starget))
len = spi_dv_device_get_echo_buffer(sdev, buffer);
if (len <= 0) {
starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
spi_dv_retrain(sdev, buffer, buffer + len,
spi_dv_device_compare_inquiry);
return;
}
......
......@@ -1860,9 +1860,11 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages,
unlock_page(pages[j]); */
res = 0;
out_unmap:
if (res > 0)
if (res > 0) {
for (j=0; j < res; j++)
page_cache_release(pages[j]);
res = 0;
}
kfree(pages);
return res;
}
......@@ -1878,8 +1880,6 @@ st_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_pages,
for (i=0; i < nr_pages; i++) {
struct page *page = sgl[i].page;
/* XXX: just for debug. Remove when PageReserved is removed */
BUG_ON(PageReserved(page));
if (dirtied)
SetPageDirty(page);
/* unlock_page(page); */
......
......@@ -4509,6 +4509,7 @@ static int sgl_map_user_pages(struct scatterlist *sgl, const unsigned int max_pa
if (res > 0) {
for (j=0; j < res; j++)
page_cache_release(pages[j]);
res = 0;
}
kfree(pages);
return res;
......@@ -4524,8 +4525,6 @@ static int sgl_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_p
for (i=0; i < nr_pages; i++) {
struct page *page = sgl[i].page;
/* XXX: just for debug. Remove when PageReserved is removed */
BUG_ON(PageReserved(page));
if (dirtied)
SetPageDirty(page);
/* FIXME: cache flush missing for rw==READ
......
......@@ -2086,6 +2086,7 @@ static void sym2_set_dt(struct scsi_target *starget, int dt)
tp->tgoal.check_nego = 1;
}
#if 0
static void sym2_set_iu(struct scsi_target *starget, int iu)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
......@@ -2111,7 +2112,7 @@ static void sym2_set_qas(struct scsi_target *starget, int qas)
tp->tgoal.qas = 0;
tp->tgoal.check_nego = 1;
}
#endif
static struct spi_function_template sym2_transport_functions = {
.set_offset = sym2_set_offset,
......@@ -2122,10 +2123,12 @@ static struct spi_function_template sym2_transport_functions = {
.show_width = 1,
.set_dt = sym2_set_dt,
.show_dt = 1,
#if 0
.set_iu = sym2_set_iu,
.show_iu = 1,
.set_qas = sym2_set_qas,
.show_qas = 1,
#endif
.get_signalling = sym2_get_signalling,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment