net: ethernet: sun4i-emac: replace magic number with macro

This patch remove magic numbers in sun4i-emac.c and replace with macros
defined in sun4i-emac.h
Signed-off-by: Conley Lee <conleylee@foxmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/tencent_71466C2135CD1780B19D7844BE3F167C940A@qq.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/allwinner/sun4i-emac.c

@@ -106,9 +106,9 @@ static void emac_update_speed(struct net_device *dev)
 
 	/* set EMAC SPEED, depend on PHY  */
 	reg_val = readl(db->membase + EMAC_MAC_SUPP_REG);
-	reg_val &= ~(0x1 << 8);
+	reg_val &= ~EMAC_MAC_SUPP_100M;
 	if (db->speed == SPEED_100)
-		reg_val |= 1 << 8;
+		reg_val |= EMAC_MAC_SUPP_100M;
 	writel(reg_val, db->membase + EMAC_MAC_SUPP_REG);
 }
 
@@ -264,7 +264,7 @@ static void emac_dma_done_callback(void *arg)
 
 	/* re enable interrupt */
 	reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-	reg_val |= (0x01 << 8);
+	reg_val |= EMAC_INT_CTL_RX_EN;
 	writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 	db->emacrx_completed_flag = 1;
@@ -429,7 +429,7 @@ static unsigned int emac_powerup(struct net_device *ndev)
 	/* initial EMAC */
 	/* flush RX FIFO */
 	reg_val = readl(db->membase + EMAC_RX_CTL_REG);
-	reg_val |= 0x8;
+	reg_val |= EMAC_RX_CTL_FLUSH_FIFO;
 	writel(reg_val, db->membase + EMAC_RX_CTL_REG);
 	udelay(1);
 
@@ -441,8 +441,8 @@ static unsigned int emac_powerup(struct net_device *ndev)
 
 	/* set MII clock */
 	reg_val = readl(db->membase + EMAC_MAC_MCFG_REG);
-	reg_val &= (~(0xf << 2));
-	reg_val |= (0xD << 2);
+	reg_val &= ~EMAC_MAC_MCFG_MII_CLKD_MASK;
+	reg_val |= EMAC_MAC_MCFG_MII_CLKD_72;
 	writel(reg_val, db->membase + EMAC_MAC_MCFG_REG);
 
 	/* clear RX counter */
@@ -506,7 +506,7 @@ static void emac_init_device(struct net_device *dev)
 
 	/* enable RX/TX0/RX Hlevel interrup */
 	reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-	reg_val |= (0xf << 0) | (0x01 << 8);
+	reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
 	writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 	spin_unlock_irqrestore(&db->lock, flags);
@@ -637,7 +637,9 @@ static void emac_rx(struct net_device *dev)
 		if (!rxcount) {
 			db->emacrx_completed_flag = 1;
 			reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-			reg_val |= (0xf << 0) | (0x01 << 8);
+			reg_val |= (EMAC_INT_CTL_TX_EN |
+					EMAC_INT_CTL_TX_ABRT_EN |
+					EMAC_INT_CTL_RX_EN);
 			writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 			/* had one stuck? */
@@ -669,7 +671,9 @@ static void emac_rx(struct net_device *dev)
 			writel(reg_val | EMAC_CTL_RX_EN,
 			       db->membase + EMAC_CTL_REG);
 			reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-			reg_val |= (0xf << 0) | (0x01 << 8);
+			reg_val |= (EMAC_INT_CTL_TX_EN |
+					EMAC_INT_CTL_TX_ABRT_EN |
+					EMAC_INT_CTL_RX_EN);
 			writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 			db->emacrx_completed_flag = 1;
@@ -783,20 +787,20 @@ static irqreturn_t emac_interrupt(int irq, void *dev_id)
 	}
 
 	/* Transmit Interrupt check */
-	if (int_status & (0x01 | 0x02))
+	if (int_status & EMAC_INT_STA_TX_COMPLETE)
 		emac_tx_done(dev, db, int_status);
 
-	if (int_status & (0x04 | 0x08))
+	if (int_status & EMAC_INT_STA_TX_ABRT)
 		netdev_info(dev, " ab : %x\n", int_status);
 
 	/* Re-enable interrupt mask */
 	if (db->emacrx_completed_flag == 1) {
 		reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-		reg_val |= (0xf << 0) | (0x01 << 8);
+		reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
 		writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 	} else {
 		reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-		reg_val |= (0xf << 0);
+		reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN);
 		writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 	}
 

drivers/net/ethernet/allwinner/sun4i-emac.h

@@ -38,6 +38,7 @@
 #define EMAC_RX_CTL_REG		(0x3c)
 #define EMAC_RX_CTL_AUTO_DRQ_EN		(1 << 1)
 #define EMAC_RX_CTL_DMA_EN		(1 << 2)
+#define EMAC_RX_CTL_FLUSH_FIFO		(1 << 3)
 #define EMAC_RX_CTL_PASS_ALL_EN		(1 << 4)
 #define EMAC_RX_CTL_PASS_CTL_EN		(1 << 5)
 #define EMAC_RX_CTL_PASS_CRC_ERR_EN	(1 << 6)
@@ -61,7 +62,21 @@
 #define EMAC_RX_IO_DATA_STATUS_OK	(1 << 7)
 #define EMAC_RX_FBC_REG		(0x50)
 #define EMAC_INT_CTL_REG	(0x54)
+#define EMAC_INT_CTL_RX_EN	(1 << 8)
+#define EMAC_INT_CTL_TX0_EN	(1)
+#define EMAC_INT_CTL_TX1_EN	(1 << 1)
+#define EMAC_INT_CTL_TX_EN	(EMAC_INT_CTL_TX0_EN | EMAC_INT_CTL_TX1_EN)
+#define EMAC_INT_CTL_TX0_ABRT_EN	(0x1 << 2)
+#define EMAC_INT_CTL_TX1_ABRT_EN	(0x1 << 3)
+#define EMAC_INT_CTL_TX_ABRT_EN	(EMAC_INT_CTL_TX0_ABRT_EN | EMAC_INT_CTL_TX1_ABRT_EN)
 #define EMAC_INT_STA_REG	(0x58)
+#define EMAC_INT_STA_TX0_COMPLETE	(0x1)
+#define EMAC_INT_STA_TX1_COMPLETE	(0x1 << 1)
+#define EMAC_INT_STA_TX_COMPLETE	(EMAC_INT_STA_TX0_COMPLETE | EMAC_INT_STA_TX1_COMPLETE)
+#define EMAC_INT_STA_TX0_ABRT	(0x1 << 2)
+#define EMAC_INT_STA_TX1_ABRT	(0x1 << 3)
+#define EMAC_INT_STA_TX_ABRT	(EMAC_INT_STA_TX0_ABRT | EMAC_INT_STA_TX1_ABRT)
+#define EMAC_INT_STA_RX_COMPLETE	(0x1 << 8)
 #define EMAC_MAC_CTL0_REG	(0x5c)
 #define EMAC_MAC_CTL0_RX_FLOW_CTL_EN	(1 << 2)
 #define EMAC_MAC_CTL0_TX_FLOW_CTL_EN	(1 << 3)
@@ -87,8 +102,11 @@
 #define EMAC_MAC_CLRT_RM		(0x0f)
 #define EMAC_MAC_MAXF_REG	(0x70)
 #define EMAC_MAC_SUPP_REG	(0x74)
+#define EMAC_MAC_SUPP_100M	(0x1 << 8)
 #define EMAC_MAC_TEST_REG	(0x78)
 #define EMAC_MAC_MCFG_REG	(0x7c)
+#define EMAC_MAC_MCFG_MII_CLKD_MASK	(0xff << 2)
+#define EMAC_MAC_MCFG_MII_CLKD_72	(0x0d << 2)
 #define EMAC_MAC_A0_REG		(0x98)
 #define EMAC_MAC_A1_REG		(0x9c)
 #define EMAC_MAC_A2_REG		(0xa0)