arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec

All definitions in pm8916.dtsi use the &pm8916_ label prefix, only the
codec uses the &wcd_codec label. &wcd_codec is confusing because the
codec on MSM8916 is split into a "wcd-digital" and "wcd-analog" part
and both could be described with &wcd_codec.

Let's just name it &pm8916_codec so it's consistent with all other PMIC
device nodes.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-5-bec0f5fb46fb@gerhold.net

arch/arm64/boot/dts/qcom/apq8016-sbc.dts

@@ -324,6 +324,14 @@ &mpss {
 	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
 };
 
+&pm8916_codec {
+	status = "okay";
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -403,7 +411,7 @@ cpu {
 			sound-dai = <&lpass MI2S_PRIMARY>;
 		};
 		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
 		};
 	};
 
@@ -413,7 +421,7 @@ cpu {
 			sound-dai = <&lpass MI2S_TERTIARY>;
 		};
 		codec {
-			sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
 		};
 	};
 };
@@ -431,14 +439,6 @@ &usb_hs_phy {
 	extcon = <&usb_id>;
 };
 
-&wcd_codec {
-	status = "okay";
-	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-	clock-names = "mclk";
-	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
-	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-};
-
 &wcnss {
 	status = "okay";
 	firmware-name = "qcom/apq8016/wcnss.mbn";

arch/arm64/boot/dts/qcom/apq8039-t2.dts

@@ -139,6 +139,13 @@ &mdss {
 	status = "okay";
 };
 
+&pm8916_codec {
+	qcom,hphl-jack-type-normally-open;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	status = "okay";
+};
+
 &pm8916_gpios {
 	gpio-line-names =
 		"PM_GPIO1",     /* WIFI_GPIO1_PRE */
@@ -265,7 +272,7 @@ cpu {
 			sound-dai = <&lpass MI2S_PRIMARY>;
 		};
 		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
 		};
 	};
 
@@ -275,7 +282,7 @@ cpu {
 			sound-dai = <&lpass MI2S_TERTIARY>;
 		};
 		codec {
-			sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
 		};
 	};
 };
@@ -476,13 +483,6 @@ otg_ep: endpoint {
 	};
 };
 
-&wcd_codec {
-	qcom,hphl-jack-type-normally-open;
-	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
-	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-	status = "okay";
-};
-
 &wcnss {
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts

@@ -222,6 +222,14 @@ &lpass_codec {
 	status = "okay";
 };
 
+&pm8916_codec {
+	status = "okay";
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_l8 {
 	regulator-min-microvolt = <2950000>;
 	regulator-max-microvolt = <2950000>;
@@ -298,7 +306,7 @@ cpu {
 			sound-dai = <&lpass MI2S_PRIMARY>;
 		};
 		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
 		};
 	};
 
@@ -308,7 +316,7 @@ cpu {
 			sound-dai = <&lpass MI2S_TERTIARY>;
 		};
 		codec {
-			sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
 		};
 	};
 };
@@ -322,14 +330,6 @@ &usb_hs_phy {
 	extcon = <&usb_id>;
 };
 
-&wcd_codec {
-	status = "okay";
-	qcom,micbias-lvl = <2800>;
-	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
-	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-	qcom,hphl-jack-type-normally-open;
-};
-
 &wcnss {
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi

@@ -28,6 +28,12 @@ &mpss {
 	pll-supply = <&pm8916_l7>;
 };
 
+&pm8916_codec {
+	vdd-cdc-io-supply = <&pm8916_l5>;
+	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	vdd-micbias-supply = <&pm8916_l13>;
+};
+
 &sdhc_1 {
 	vmmc-supply = <&pm8916_l8>;
 	vqmmc-supply = <&pm8916_l5>;
@@ -43,12 +49,6 @@ &usb_hs_phy {
 	v3p3-supply = <&pm8916_l13>;
 };
 
-&wcd_codec {
-	vdd-cdc-io-supply = <&pm8916_l5>;
-	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
-	vdd-micbias-supply = <&pm8916_l13>;
-};
-
 &wcnss {
 	vddpx-supply = <&pm8916_l7>;
 };

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -139,7 +139,7 @@ pm8916_vib: vibrator@c000 {
 			status = "disabled";
 		};
 
-		wcd_codec: audio-codec@f000 {
+		pm8916_codec: audio-codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
 			reg = <0xf000>;
 			reg-names = "pmic-codec-core";