Skip to content

L
linux
Commit 27e0f0fe authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://gkernel.bkbits.net/net-drivers-2.5 

into home.osdl.org:/home/torvalds/v2.5/linux
parents 5f99d385 d113a0e9
Show whitespace changes
Inline Side-by-side
Showing with 1311 additions and 962 deletions
arch/i386/defconfig
View file @ 27e0f0fe
......@@ -10,7 +10,8 @@ CONFIG_GENERIC_ISA_DMA=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
#
# General setup
......@@ -20,6 +21,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
......@@ -27,6 +29,7 @@ CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
......@@ -79,7 +82,8 @@ CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_PREEMPT=y
......@@ -100,20 +104,22 @@ CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SOFTWARE_SUSPEND=y
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI_HT=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
......@@ -126,11 +132,11 @@ CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set
#
# APM (Advanced Power Management) BIOS Support
......@@ -151,6 +157,7 @@ CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
......@@ -173,12 +180,14 @@ CONFIG_PCMCIA_PROBE=y
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
......@@ -262,7 +271,6 @@ CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
......@@ -300,6 +308,7 @@ CONFIG_IDEDMA_AUTO=y
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
......@@ -330,11 +339,14 @@ CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
......@@ -346,22 +358,21 @@ CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
CONFIG_SCSI_QLA2XXX_CONFIG=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA23XX is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
......@@ -402,7 +413,7 @@ CONFIG_IEEE1394=y
#
#
# Texas Instruments PCILynx requires I2C bit-banging
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y
......@@ -447,10 +458,67 @@ CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -459,7 +527,9 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -487,14 +557,13 @@ CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
......@@ -517,6 +586,7 @@ CONFIG_NET_PCI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
......@@ -567,8 +637,9 @@ CONFIG_8139TOO=y
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
......@@ -588,6 +659,11 @@ CONFIG_8139TOO=y
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
......@@ -659,6 +735,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -672,20 +749,6 @@ CONFIG_PRINTER=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
......@@ -713,7 +776,6 @@ CONFIG_PRINTER=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
......@@ -732,10 +794,16 @@ CONFIG_DRM=y
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I830=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Multimedia devices
#
......@@ -746,138 +814,6 @@ CONFIG_DRM_I830=y
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
......@@ -1057,7 +993,6 @@ CONFIG_USB_HIDINPUT=y
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
......@@ -1077,30 +1012,170 @@ CONFIG_USB_HIDINPUT=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
# File systems
#
# CONFIG_BT is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
......@@ -1117,8 +1192,9 @@ CONFIG_X86_MPPARSE=y
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_CRC32=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
arch/ppc/boot/simple/embed_config.c
View file @ 27e0f0fe
......@@ -50,7 +50,7 @@ embed_config(bd_t **bdp)
{
u_char *mp;
u_char eebuf[128];
int i;
int i = 8;
bd_t *bd;
bd = *bdp;
......@@ -62,11 +62,21 @@ embed_config(bd_t **bdp)
/* All we are looking for is the Ethernet MAC address. The
* first 8 bytes are 'MOTOROLA', so check for part of that.
* Next, the VPD describes a MAC 'packet' as being of type 08
* and size 06. So we look for that and the MAC must follow.
* If there are more than one, we still only care about the first.
* If it's there, assume we have a valid MAC address. If not,
* grab our default one.
*/
if ((*(uint *)eebuf) == 0x4d4f544f)
mp = &eebuf[0x4c];
if ((*(uint *)eebuf) == 0x4d4f544f) {
while (i < 127 && !(eebuf[i] == 0x08 && eebuf[i + 1] == 0x06))
i += eebuf[i + 1] + 2; /* skip this packet */
if (i == 127) /* Couldn't find. */
mp = (u_char *)def_enet_addr;
else
mp = &eebuf[i + 2];
}
else
mp = (u_char *)def_enet_addr;
......
arch/ppc64/defconfig
View file @ 27e0f0fe
#
# Automatically generated make config: don't edit
#
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_ISA_DMA=y
......@@ -14,7 +15,8 @@ CONFIG_FORCE_MAX_ZONEORDER=13
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
#
# General setup
......@@ -33,6 +35,7 @@ CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
......@@ -51,21 +54,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC=y
CONFIG_PPC64=y
CONFIG_ALTIVEC=y
# CONFIG_POWER4_ONLY is not set
CONFIG_SMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NR_CPUS=32
# CONFIG_HMT is not set
# CONFIG_DISCONTIGMEM is not set
# CONFIG_RTAS_FLASH is not set
CONFIG_SCANLOG=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_FLASH=m
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
#
# General setup
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
......@@ -74,6 +79,10 @@ CONFIG_PCI_NAMES=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
......@@ -117,6 +126,7 @@ CONFIG_BLK_DEV_INITRD=y
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
......@@ -145,9 +155,9 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
......@@ -155,18 +165,21 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX_CONFIG=y
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA21XX=y
CONFIG_SCSI_QLA22XX=y
CONFIG_SCSI_QLA23XX=y
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
......@@ -181,6 +194,7 @@ CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y
......@@ -240,7 +254,9 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -268,7 +284,6 @@ CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
......@@ -292,6 +307,7 @@ CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
......@@ -303,7 +319,6 @@ CONFIG_E100=y
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
......@@ -344,10 +359,10 @@ CONFIG_PPPOE=m
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
......@@ -365,6 +380,11 @@ CONFIG_PPPOE=m
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
......@@ -433,6 +453,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -444,20 +465,6 @@ CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_HVC_CONSOLE=y
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
......@@ -483,11 +490,15 @@ CONFIG_HVC_CONSOLE=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MAX_RAW_DEVS=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Multimedia devices
......@@ -499,6 +510,67 @@ CONFIG_RAW_DRIVER=y
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G450=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
......@@ -551,11 +623,14 @@ CONFIG_VFAT_FS=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
......@@ -580,6 +655,7 @@ CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
......@@ -602,11 +678,11 @@ CONFIG_CIFS=m
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
......@@ -646,72 +722,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G450=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
......
arch/ppc64/kernel/asm-offsets.c
View file @ 27e0f0fe
......@@ -13,6 +13,7 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
......
arch/ppc64/kernel/head.S
View file @ 27e0f0fe
......@@ -646,12 +646,14 @@ fast_exception_return:
*/
.globl DataAccess_common
DataAccess_common:
BEGIN_FTR_SECTION
mfspr r22,DAR
srdi r22,r22,60
cmpi 0,r22,0xc
/* Segment fault on a bolted segment. Go off and map that segment. */
beq- .do_stab_bolted
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
stab_bolted_user_return:
EXCEPTION_PROLOG_COMMON
ld r3,_DSISR(r1)
......@@ -661,10 +663,12 @@ stab_bolted_user_return:
rlwinm r4,r3,32-23,29,29 /* DSISR_STORE -> _PAGE_RW */
ld r3,_DAR(r1) /* into the hash table */
BEGIN_FTR_SECTION
beq+ 2f /* If so handle it */
li r4,0x300 /* Trap number */
bl .do_stab_SI
b 1f
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
2: li r5,0x300
bl .do_hash_page_DSI /* Try to handle as hpte fault */
......@@ -690,7 +694,7 @@ DataAccessSLB_common:
EXCEPTION_PROLOG_COMMON
ld r3,_DAR(r1)
li r4,0x380 /* Exception vector */
bl .ste_allocate
bl .slb_allocate
or. r3,r3,r3 /* Check return code */
beq fast_exception_return /* Return if we succeeded */
addi r3,r1,STACK_FRAME_OVERHEAD
......@@ -705,12 +709,14 @@ DataAccessSLB_common:
InstructionAccess_common:
EXCEPTION_PROLOG_COMMON
BEGIN_FTR_SECTION
andis. r0,r23,0x0020 /* no ste found? */
beq+ 2f
mr r3,r22 /* SRR0 at interrupt */
li r4,0x400 /* Trap number */
bl .do_stab_SI
b 1f
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
2: mr r3,r22
li r5,0x400
......@@ -730,7 +736,7 @@ InstructionAccessSLB_common:
EXCEPTION_PROLOG_COMMON
mr r3,r22 /* SRR0 = NIA */
li r4,0x480 /* Exception vector */
bl .ste_allocate
bl .slb_allocate
or. r3,r3,r3 /* Check return code */
beq+ fast_exception_return /* Return if we succeeded */
......@@ -1006,48 +1012,27 @@ _GLOBAL(do_stab_bolted)
* r20 - r23, SRR0 and SRR1 are saved in the exception frame.
* We assume we aren't going to take any exceptions during this procedure.
*/
/* XXX note fix masking in get_kernel_vsid to match */
_GLOBAL(do_slb_bolted)
stw r23,EX_CCR(r21) /* save CR in exc. frame */
/* (((ea >> 28) & 0x1fff) << 15) | (ea >> 60) */
mfspr r21,DAR
rldicl r20,r21,36,32 /* Permits a full 32b of ESID */
rldicr r20,r20,15,48
rldicl r21,r21,4,60
or r20,r20,r21
li r21,9 /* VSID_RANDOMIZER */
sldi r21,r21,32
oris r21,r21,58231
ori r21,r21,39831
mulld r20,r20,r21
clrldi r20,r20,28 /* r20 = vsid */
/* Search the SLB for a free entry */
li r22,1
1:
slbmfee r23,r22
rldicl r23,r23,37,63
cmpwi r23,0
beq 4f /* Found an invalid entry */
addi r22,r22,1
cmpldi r22,64
blt 1b
/*
* We take the next entry, round robin. Previously we tried
* to find a free slot first but that took too long. Unfortunately
* we dont have any LRU information to help us choose a slot.
*/
/* No free entry - just take the next entry, round-robin */
/* XXX we should get the number of SLB entries from the naca */
/* r20 = paca */
/* use a cpu feature mask if we ever change our slb size */
SLB_NUM_ENTRIES = 64
2: mfspr r21,SPRG3
ld r22,PACASTABRR(r21)
addi r23,r22,1
cmpdi r23,SLB_NUM_ENTRIES
blt 3f
li r23,1
3: std r23,PACASTABRR(r21)
1: ld r22,PACASTABRR(r20)
addi r21,r22,1
cmpdi r21,SLB_NUM_ENTRIES
blt+ 2f
li r21,1 /* dont touch bolted slot 0 */
2: std r21,PACASTABRR(r20)
/* r20 = vsid, r22 = entry */
/* r20 = paca, r22 = entry */
/*
* Never cast out the segment for our kernel stack. Since we
......@@ -1056,48 +1041,86 @@ SLB_NUM_ENTRIES = 64
* which gets invalidated due to a tlbie from another cpu at a
* non recoverable point (after setting srr0/1) - Anton
*/
slbmfee r23,r22
srdi r23,r23,28
slbmfee r21,r22
srdi r21,r21,27
/*
* This is incorrect (r1 is not the kernel stack) if we entered
* from userspace but there is no critical window from userspace
* so this should be OK. Also if we cast out the userspace stack
* segment while in userspace we will fault it straight back in.
*/
srdi r21,r1,28
cmpd r21,r23
beq- 2b
srdi r23,r1,27
ori r23,r23,1
cmpd r23,r21
beq- 1b
/* Put together the vsid portion of the entry. */
4: li r21,0
rldimi r21,r20,12,0
ori r20,r21,1024
ori r20,r20,128 /* set class bit for kernel region */
#ifndef CONFIG_PPC_ISERIES
ori r20,r20,256 /* map kernel region with large ptes */
#endif
/* r20 = paca, r22 = entry */
/* (((ea >> 28) & 0x1fff) << 15) | (ea >> 60) */
mfspr r21,DAR
rldicl r23,r21,36,51
sldi r23,r23,15
srdi r21,r21,60
or r23,r23,r21
/* VSID_RANDOMIZER */
li r21,9
sldi r21,r21,32
oris r21,r21,58231
ori r21,r21,39831
/* vsid = (ordinal * VSID_RANDOMIZER) & VSID_MASK */
mulld r23,r23,r21
clrldi r23,r23,28
/* r20 = paca, r22 = entry, r23 = vsid */
/* Put together slb word1 */
sldi r23,r23,12
/* Put together the esid portion of the entry. */
mfspr r21,DAR /* Get the new esid */
rldicl r21,r21,36,28 /* Permits a full 36b of ESID */
li r23,0
rldimi r23,r21,28,0 /* Insert esid */
oris r21,r23,2048 /* valid bit */
rldimi r21,r22,0,52 /* Insert entry */
BEGIN_FTR_SECTION
/* set kp and c bits */
ori r23,r23,0x480
END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE)
BEGIN_FTR_SECTION
/* set kp, l and c bits */
ori r23,r23,0x580
END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
/* r20 = paca, r22 = entry, r23 = slb word1 */
/* Put together slb word0 */
mfspr r21,DAR
rldicr r21,r21,0,35 /* get the new esid */
oris r21,r21,2048 /* set valid bit */
rldimi r21,r22,0,52 /* insert entry */
/* r20 = paca, r21 = slb word0, r23 = slb word1 */
/*
* No need for an isync before or after this slbmte. The exception
* we enter with and the rfid we exit with are context synchronizing .
*/
slbmte r20,r21
slbmte r23,r21
/* All done -- return from exception. */
mfsprg r20,3 /* Load the PACA pointer */
ld r21,PACAEXCSP(r20) /* Get the exception frame pointer */
addi r21,r21,EXC_FRAME_SIZE
lwz r23,EX_CCR(r21) /* get saved CR */
/* note that this is almost identical to maskable_exception_exit */
mtcr r23 /* restore CR */
/*
* Until everyone updates binutils hardwire the POWER4 optimised
* single field mtcrf
*/
#if 0
.machine push
.machine "power4"
mtcrf 0x80,r23
.machine pop
#else
.long 0x7ef80120
#endif
mfmsr r22
li r23, MSR_RI
......@@ -1110,7 +1133,7 @@ SLB_NUM_ENTRIES = 64
mtspr SRR1,r23
ld r22,EX_R22(r21) /* restore r22 and r23 */
ld r23,EX_R23(r21)
mfspr r20,SPRG2
ld r20,EX_R20(r21)
mfspr r21,SPRG1
rfid
......
arch/ppc64/kernel/iSeries_VpdInfo.c
View file @ 27e0f0fe
......@@ -25,6 +25,7 @@
/* Ported to ppc64, August 20, 2001 */
/* End Change Activity */
/************************************************************************/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/types.h>
......
arch/ppc64/kernel/lparcfg.c
View file @ 27e0f0fe
......@@ -5,6 +5,8 @@
* Copyright (c) 2003 Dave Engebretsen
* Will Schmidt willschm@us.ibm.com
* SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation.
* Nathan Lynch nathanl@austin.ibm.com
* Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -15,6 +17,7 @@
* keyword - value pairs that specify the configuration of the partition.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
......@@ -33,6 +36,9 @@ static struct proc_dir_entry *proc_ppc64_lparcfg;
#define LPARCFG_BUFF_SIZE 4096
#ifdef CONFIG_PPC_ISERIES
#define lparcfg_write NULL
static unsigned char e2a(unsigned char x)
{
switch (x) {
......@@ -326,7 +332,7 @@ static int lparcfg_data(unsigned char *buf, unsigned long size)
system_potential_processors = get_splpar_potential_characteristics();
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"system_active_processors=%d\n",
(h_resource >> 2*8) && 0xffff);
(h_resource >> 2*8) & 0xffff);
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"system_potential_processors=%d\n",
system_potential_processors);
......@@ -367,22 +373,115 @@ static int lparcfg_data(unsigned char *buf, unsigned long size)
if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) {
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"pool=%d\n", (h_aggregation >> 0*8)&&0xffff);
"pool=%d\n", (h_aggregation >> 0*8)&0xffff);
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"pool_capacity=%d\n", (h_resource >> 3*8) &&0xffff);
"pool_capacity=%d\n", (h_resource >> 3*8) &0xffff);
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"group=%d\n", (h_aggregation >> 2*8)&&0xffff);
"group=%d\n", (h_aggregation >> 2*8)&0xffff);
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"capped=%d\n", (h_resource >> 6*8)&&0x40);
"capped=%d\n", (h_resource >> 6*8)&0x40);
n += snprintf(buf+n, LPARCFG_BUFF_SIZE - n,
"capacity_weight=%d\n", (int)(h_resource>>5*8)&0xFF);
}
return 0;
}
/*
* Interface for changing system parameters (variable capacity weight
* and entitled capacity). Format of input is "param_name=value";
* anything after value is ignored. Valid parameters at this time are
* "partition_entitled_capacity" and "capacity_weight". We use
* H_SET_PPP to alter parameters.
*
* This function should be invoked only on systems with
* FW_FEATURE_SPLPAR.
*/
static ssize_t lparcfg_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
{
char *kbuf;
char *tmp;
u64 new_entitled, *new_entitled_ptr = &new_entitled;
u8 new_weight, *new_weight_ptr = &new_weight;
unsigned long current_entitled; /* parameters for h_get_ppp */
unsigned long dummy;
unsigned long resource;
u8 current_weight;
ssize_t retval = -ENOMEM;
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
goto out;
retval = -EFAULT;
if (copy_from_user(kbuf, buf, count))
goto out;
retval = -EINVAL;
kbuf[count - 1] = '\0';
tmp = strchr(kbuf, '=');
if (!tmp)
goto out;
*tmp++ = '\0';
if (!strcmp(kbuf, "partition_entitled_capacity")) {
char *endp;
*new_entitled_ptr = (u64)simple_strtoul(tmp, &endp, 10);
if (endp == tmp)
goto out;
new_weight_ptr = &current_weight;
} else if (!strcmp(kbuf, "capacity_weight")) {
char *endp;
*new_weight_ptr = (u8)simple_strtoul(tmp, &endp, 10);
if (endp == tmp)
goto out;
new_entitled_ptr = &current_entitled;
} else
goto out;
/* Get our current parameters */
retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
if (retval) {
retval = -EIO;
goto out;
}
current_weight = (resource>>5*8)&0xFF;
pr_debug("%s: current_entitled = %lu, current_weight = %lu\n",
__FUNCTION__, current_entitled, current_weight);
pr_debug("%s: new_entitled = %lu, new_weight = %lu\n",
__FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
*new_weight_ptr);
if (retval == H_Success || retval == H_Constrained) {
retval = count;
} else if (retval == H_Busy) {
retval = -EBUSY;
} else if (retval == H_Hardware) {
retval = -EIO;
} else if (retval == H_Parameter) {
retval = -EINVAL;
} else {
printk(KERN_WARNING "%s: received unknown hv return code %ld",
__FUNCTION__, retval);
retval = -EIO;
}
out:
kfree(kbuf);
return retval;
}
#endif /* CONFIG_PPC_PSERIES */
......@@ -442,8 +541,15 @@ struct file_operations lparcfg_fops = {
int __init lparcfg_init(void)
{
struct proc_dir_entry *ent;
mode_t mode = S_IRUSR;
/* Allow writing if we have FW_FEATURE_SPLPAR */
if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) {
lparcfg_fops.write = lparcfg_write;
mode |= S_IWUSR;
}
ent = create_proc_entry("ppc64/lparcfg", S_IRUSR, NULL);
ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
if (ent) {
ent->proc_fops = &lparcfg_fops;
ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL);
......
arch/ppc64/kernel/pacaData.c
View file @ 27e0f0fe
......@@ -41,7 +41,6 @@ struct systemcfg *systemcfg;
.xStab_data = { \
.real = (asrr), /* Real pointer to segment table */ \
.virt = (asrv), /* Virt pointer to segment table */ \
.next_round_robin = 1 /* Round robin index */ \
}, \
.lpQueuePtr = (lpq), /* &xItLpQueue, */ \
/* .xRtas = { \
......
arch/ppc64/kernel/ppc_ksyms.c
View file @ 27e0f0fe
......@@ -83,7 +83,7 @@ EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(naca);
EXPORT_SYMBOL(__down);
/* EXPORT_SYMBOL(csum_partial); already in net/netsyms.c */
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(ip_fast_csum);
EXPORT_SYMBOL(csum_tcpudp_magic);
......@@ -191,12 +191,12 @@ EXPORT_SYMBOL(find_all_nodes);
EXPORT_SYMBOL(get_property);
#endif
EXPORT_SYMBOL_NOVERS(memcpy);
EXPORT_SYMBOL_NOVERS(memset);
EXPORT_SYMBOL_NOVERS(memmove);
EXPORT_SYMBOL_NOVERS(memscan);
EXPORT_SYMBOL_NOVERS(memcmp);
EXPORT_SYMBOL_NOVERS(memchr);
EXPORT_SYMBOL(abs);
......
arch/ppc64/kernel/proc_ppc64.c
View file @ 27e0f0fe
......@@ -27,6 +27,7 @@
* End Change Activity
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/proc_fs.h>
......
arch/ppc64/kernel/process.c
View file @ 27e0f0fe
......@@ -151,7 +151,31 @@ struct task_struct *__switch_to(struct task_struct *prev,
local_irq_save(flags);
last = _switch(old_thread, new_thread);
/*
* force our kernel stack out of the ERAT and SLB, this is to
* avoid the race where we it hangs around in the ERAT but not the
* SLB and the ERAT gets invalidated at just the wrong moment by
* another CPU doing a tlbie.
*
* We definitely dont want to flush our bolted segment, so check
* for that first.
*/
if ((cur_cpu_spec->cpu_features & CPU_FTR_SLB) &&
GET_ESID((unsigned long)_get_SP()) != GET_ESID(PAGE_OFFSET)) {
union {
unsigned long word0;
slb_dword0 data;
} esid_data;
esid_data.word0 = 0;
/* class bit is in valid field for slbie instruction */
esid_data.data.v = 1;
esid_data.data.esid = GET_ESID((unsigned long)_get_SP());
asm volatile("isync; slbie %0; isync" : : "r" (esid_data));
}
local_irq_restore(flags);
return last;
}
......
arch/ppc64/kernel/prom.c
View file @ 27e0f0fe
......@@ -2560,6 +2560,7 @@ int of_remove_node(struct device_node *np)
return 0;
}
#ifdef CONFIG_PROC_DEVICETREE
/*
* Add a node to /proc/device-tree.
*/
......@@ -2592,6 +2593,17 @@ static void remove_node_proc_entries(struct device_node *np)
if (np->pde)
remove_proc_entry(np->pde->name, parent->pde);
}
#else /* !CONFIG_PROC_DEVICETREE */
static void add_node_proc_entries(struct device_node *np)
{
return;
}
static void remove_node_proc_entries(struct device_node *np)
{
return;
}
#endif /* CONFIG_PROC_DEVICETREE */
/*
* Fix up the uninitialized fields in a new device node:
......
arch/ppc64/kernel/rtas_flash.c
View file @ 27e0f0fe
......@@ -14,8 +14,6 @@
*/
#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
#include <asm/proc_fs.h>
#include <asm/delay.h>
......
arch/ppc64/kernel/setup.c
View file @ 27e0f0fe
......@@ -38,6 +38,7 @@
#include <asm/paca.h>
#include <asm/ppcdebug.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
extern unsigned long klimit;
......@@ -430,8 +431,58 @@ void parse_cmd_line(unsigned long r3, unsigned long r4, unsigned long r5,
}
}
#ifdef CONFIG_PPC_PSERIES
static int __init set_preferred_console(void)
{
struct device_node *prom_stdout;
char *name;
/* The user has requested a console so this is already set up. */
if (strstr(cmd_line, "console="))
return -EBUSY;
prom_stdout = find_path_device(of_stdout_device);
if (!prom_stdout)
return -ENODEV;
name = (char *)get_property(prom_stdout, "name", NULL);
if (!name)
return -ENODEV;
if (strcmp(name, "serial") == 0) {
int i;
u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
if (i > 8) {
int offset;
switch (reg[1]) {
case 0x3f8:
offset = 0;
break;
case 0x2f8:
offset = 1;
break;
case 0x898:
offset = 2;
break;
case 0x890:
offset = 3;
break;
default:
/* We dont recognise the serial port */
return -ENODEV;
}
return add_preferred_console("ttyS", offset, NULL);
}
} else if (strcmp(name, "vty") == 0) {
/* pSeries LPAR virtual console */
return add_preferred_console("hvc", 0, NULL);
}
return -ENODEV;
}
console_initcall(set_preferred_console);
int parse_bootinfo(void)
{
struct bi_record *rec;
......
arch/ppc64/kernel/signal.c
View file @ 27e0f0fe
......@@ -14,6 +14,7 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
......
arch/ppc64/kernel/signal32.c
View file @ 27e0f0fe
......@@ -14,6 +14,7 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
......
arch/ppc64/kernel/stab.c
View file @ 27e0f0fe
......@@ -12,8 +12,6 @@
* 2 of the License, or (at your option) any later version.
*/
/* XXX Note: Changes for bolted region have not been merged - Anton */
#include <linux/config.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
......@@ -59,6 +57,15 @@ void stab_initialize(unsigned long stab)
}
}
/* Both the segment table and SLB code uses the following cache */
#define NR_STAB_CACHE_ENTRIES 8
DEFINE_PER_CPU(long, stab_cache_ptr);
DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
/*
* Segment table stuff
*/
/*
* Create a segment table entry for the given esid/vsid pair.
*/
......@@ -91,14 +98,8 @@ int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid)
/*
* Could not find empty entry, pick one with a round robin selection.
* Search all entries in the two groups. Note that the first time
* we get here, we start with entry 1 so the initializer
* can be common with the SLB castout code.
* Search all entries in the two groups.
*/
/* This assumes we never castout when initializing the stab. */
PMC_SW_PROCESSOR(stab_capacity_castouts);
castout_entry = get_paca()->xStab_data.next_round_robin;
for (i = 0; i < 16; i++) {
if (castout_entry < 8) {
......@@ -123,23 +124,169 @@ int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid)
/* Modify the old entry to the new value. */
/* Force previous translations to complete. DRENG */
asm volatile("isync" : : : "memory" );
asm volatile("isync" : : : "memory");
castout_ste->dw0.dw0.v = 0;
asm volatile("sync" : : : "memory" ); /* Order update */
asm volatile("sync" : : : "memory"); /* Order update */
castout_ste->dw1.dw1.vsid = vsid;
old_esid = castout_ste->dw0.dw0.esid;
castout_ste->dw0.dw0.esid = esid;
castout_ste->dw0.dw0.kp = 1;
asm volatile("eieio" : : : "memory" ); /* Order update */
asm volatile("eieio" : : : "memory"); /* Order update */
castout_ste->dw0.dw0.v = 1;
asm volatile("slbie %0" : : "r" (old_esid << SID_SHIFT));
/* Ensure completion of slbie */
asm volatile("sync" : : : "memory" );
asm volatile("sync" : : : "memory");
return (global_entry | (castout_entry & 0x7));
}
static inline void __ste_allocate(unsigned long esid, unsigned long vsid,
mm_context_t context)
{
unsigned char stab_entry;
unsigned long *offset;
int region_id = REGION_ID(esid << SID_SHIFT);
stab_entry = make_ste(get_paca()->xStab_data.virt, esid, vsid);
if (region_id != USER_REGION_ID)
return;
offset = &__get_cpu_var(stab_cache_ptr);
if (*offset < NR_STAB_CACHE_ENTRIES) {
__get_cpu_var(stab_cache[*offset]) = stab_entry;
}
(*offset)++;
}
/*
* Allocate a segment table entry for the given ea.
*/
int ste_allocate(unsigned long ea)
{
unsigned long vsid, esid;
mm_context_t context;
/* Check for invalid effective addresses. */
if (!IS_VALID_EA(ea))
return 1;
/* Kernel or user address? */
if (REGION_ID(ea) >= KERNEL_REGION_ID) {
vsid = get_kernel_vsid(ea);
context = REGION_ID(ea);
} else {
if (!current->mm)
return 1;
context = current->mm->context;
vsid = get_vsid(context, ea);
}
esid = GET_ESID(ea);
__ste_allocate(esid, vsid, context);
/* Order update */
asm volatile("sync":::"memory");
return 0;
}
/*
* preload some userspace segments into the segment table.
*/
static void preload_stab(struct task_struct *tsk, struct mm_struct *mm)
{
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
unsigned long unmapped_base;
unsigned long pc_esid = GET_ESID(pc);
unsigned long stack_esid = GET_ESID(stack);
unsigned long unmapped_base_esid;
unsigned long vsid;
if (test_tsk_thread_flag(tsk, TIF_32BIT))
unmapped_base = TASK_UNMAPPED_BASE_USER32;
else
unmapped_base = TASK_UNMAPPED_BASE_USER64;
unmapped_base_esid = GET_ESID(unmapped_base);
if (!IS_VALID_EA(pc) || (REGION_ID(pc) >= KERNEL_REGION_ID))
return;
vsid = get_vsid(mm->context, pc);
__ste_allocate(pc_esid, vsid, mm->context);
if (pc_esid == stack_esid)
return;
if (!IS_VALID_EA(stack) || (REGION_ID(stack) >= KERNEL_REGION_ID))
return;
vsid = get_vsid(mm->context, stack);
__ste_allocate(stack_esid, vsid, mm->context);
if (pc_esid == unmapped_base_esid || stack_esid == unmapped_base_esid)
return;
if (!IS_VALID_EA(unmapped_base) ||
(REGION_ID(unmapped_base) >= KERNEL_REGION_ID))
return;
vsid = get_vsid(mm->context, unmapped_base);
__ste_allocate(unmapped_base_esid, vsid, mm->context);
/* Order update */
asm volatile("sync" : : : "memory");
}
/* Flush all user entries from the segment table of the current processor. */
void flush_stab(struct task_struct *tsk, struct mm_struct *mm)
{
STE *stab = (STE *) get_paca()->xStab_data.virt;
STE *ste;
unsigned long *offset = &__get_cpu_var(stab_cache_ptr);
/* Force previous translations to complete. DRENG */
asm volatile("isync" : : : "memory");
if (*offset <= NR_STAB_CACHE_ENTRIES) {
int i;
for (i = 0; i < *offset; i++) {
ste = stab + __get_cpu_var(stab_cache[i]);
ste->dw0.dw0.v = 0;
}
asm volatile("sync; slbia; sync":::"memory");
} else {
unsigned long entry;
/* Invalidate all entries. */
ste = stab;
/* Never flush the first entry. */
ste += 1;
for (entry = 1;
entry < (PAGE_SIZE / sizeof(STE));
entry++, ste++) {
unsigned long ea;
ea = ste->dw0.dw0.esid << SID_SHIFT;
if (ea < KERNELBASE) {
ste->dw0.dw0.v = 0;
}
}
asm volatile("sync; slbia; sync":::"memory");
}
*offset = 0;
preload_stab(tsk, mm);
}
/*
* SLB stuff
*/
/*
* Create a segment buffer entry for the given esid/vsid pair.
*
......@@ -160,21 +307,10 @@ void make_slbe(unsigned long esid, unsigned long vsid, int large,
} vsid_data;
/*
* Find an empty entry, if one exists. Must start at 0 because
* we use this code to load SLB entry 0 at boot.
* We take the next entry, round robin. Previously we tried
* to find a free slot first but that took too long. Unfortunately
* we dont have any LRU information to help us choose a slot.
*/
for (entry = 0; entry < naca->slb_size; entry++) {
asm volatile("slbmfee %0,%1"
: "=r" (esid_data) : "r" (entry));
if (!esid_data.data.v)
goto write_entry;
}
/*
* Could not find empty entry, pick one with a round robin selection.
*/
PMC_SW_PROCESSOR(stab_capacity_castouts);
/*
* Never cast out the segment for our kernel stack. Since we
......@@ -190,13 +326,13 @@ void make_slbe(unsigned long esid, unsigned long vsid, int large,
if (castout_entry >= naca->slb_size)
castout_entry = 1;
asm volatile("slbmfee %0,%1" : "=r" (esid_data) : "r" (entry));
} while (esid_data.data.esid == GET_ESID((unsigned long)_get_SP()));
} while (esid_data.data.v &&
esid_data.data.esid == GET_ESID((unsigned long)_get_SP()));
get_paca()->xStab_data.next_round_robin = castout_entry;
/* slbie not needed as the previous mapping is still valid. */
write_entry:
/*
* Write the new SLB entry.
*/
......@@ -220,211 +356,129 @@ void make_slbe(unsigned long esid, unsigned long vsid, int large,
asm volatile("slbmte %0,%1" : : "r" (vsid_data), "r" (esid_data));
}
static inline void __ste_allocate(unsigned long esid, unsigned long vsid,
int kernel_segment, mm_context_t context)
static inline void __slb_allocate(unsigned long esid, unsigned long vsid,
mm_context_t context)
{
if (cur_cpu_spec->cpu_features & CPU_FTR_SLB) {
int large = 0;
int region_id = REGION_ID(esid << SID_SHIFT);
unsigned long *offset;
#ifndef CONFIG_PPC_ISERIES
if (REGION_ID(esid << SID_SHIFT) == KERNEL_REGION_ID)
if (cur_cpu_spec->cpu_features & CPU_FTR_16M_PAGE) {
if (region_id == KERNEL_REGION_ID)
large = 1;
else if (REGION_ID(esid << SID_SHIFT) == USER_REGION_ID)
else if (region_id == USER_REGION_ID)
large = in_hugepage_area(context, esid << SID_SHIFT);
#endif
make_slbe(esid, vsid, large, kernel_segment);
} else {
unsigned char top_entry, stab_entry, *segments;
stab_entry = make_ste(get_paca()->xStab_data.virt, esid, vsid);
PMC_SW_PROCESSOR_A(stab_entry_use, stab_entry & 0xf);
segments = get_paca()->xSegments;
top_entry = get_paca()->stab_cache_pointer;
if (!kernel_segment && top_entry < STAB_CACHE_SIZE) {
segments[top_entry] = stab_entry;
if (top_entry == STAB_CACHE_SIZE)
top_entry = 0xff;
top_entry++;
get_paca()->stab_cache_pointer = top_entry;
}
make_slbe(esid, vsid, large, region_id != USER_REGION_ID);
if (region_id != USER_REGION_ID)
return;
offset = &__get_cpu_var(stab_cache_ptr);
if (*offset < NR_STAB_CACHE_ENTRIES) {
__get_cpu_var(stab_cache[*offset]) = esid;
}
(*offset)++;
}
/*
* Allocate a segment table entry for the given ea.
*/
int ste_allocate(unsigned long ea)
int slb_allocate(unsigned long ea)
{
unsigned long vsid, esid;
int kernel_segment = 0;
mm_context_t context;
PMC_SW_PROCESSOR(stab_faults);
/* Check for invalid effective addresses. */
if (!IS_VALID_EA(ea))
if (unlikely(!IS_VALID_EA(ea)))
return 1;
/* Kernel or user address? */
if (REGION_ID(ea) >= KERNEL_REGION_ID) {
kernel_segment = 1;
vsid = get_kernel_vsid(ea);
context = REGION_ID(ea);
vsid = get_kernel_vsid(ea);
} else {
if (! current->mm)
if (unlikely(!current->mm))
return 1;
context = current->mm->context;
vsid = get_vsid(context, ea);
}
esid = GET_ESID(ea);
__ste_allocate(esid, vsid, kernel_segment, context);
if (!(cur_cpu_spec->cpu_features & CPU_FTR_SLB)) {
/* Order update */
asm volatile("sync":::"memory");
}
__slb_allocate(esid, vsid, context);
return 0;
}
unsigned long ppc64_preload_all_segments;
unsigned long ppc64_stab_preload = 1;
#define STAB_PRESSURE 0
#define USE_SLBIE_ON_STAB 0
/*
* preload all 16 segments for a 32 bit process and the PC and SP segments
* for a 64 bit process.
* preload some userspace segments into the SLB.
*/
static void preload_stab(struct task_struct *tsk, struct mm_struct *mm)
static void preload_slb(struct task_struct *tsk, struct mm_struct *mm)
{
if (ppc64_preload_all_segments &&
test_tsk_thread_flag(tsk, TIF_32BIT)) {
unsigned long esid, vsid;
for (esid = 0; esid < 16; esid++) {
unsigned long ea = esid << SID_SHIFT;
vsid = get_vsid(mm->context, ea);
__ste_allocate(esid, vsid, 0, mm->context);
}
} else {
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
unsigned long pc_segment = pc & ~SID_MASK;
unsigned long stack_segment = stack & ~SID_MASK;
unsigned long unmapped_base;
unsigned long pc_esid = GET_ESID(pc);
unsigned long stack_esid = GET_ESID(stack);
unsigned long unmapped_base_esid;
unsigned long vsid;
if (pc) {
if (!IS_VALID_EA(pc) ||
(REGION_ID(pc) >= KERNEL_REGION_ID))
if (test_tsk_thread_flag(tsk, TIF_32BIT))
unmapped_base = TASK_UNMAPPED_BASE_USER32;
else
unmapped_base = TASK_UNMAPPED_BASE_USER64;
unmapped_base_esid = GET_ESID(unmapped_base);
if (!IS_VALID_EA(pc) || (REGION_ID(pc) >= KERNEL_REGION_ID))
return;
vsid = get_vsid(mm->context, pc);
__ste_allocate(GET_ESID(pc), vsid, 0, mm->context);
}
__slb_allocate(pc_esid, vsid, mm->context);
if (stack && (pc_segment != stack_segment)) {
if (!IS_VALID_EA(stack) ||
(REGION_ID(stack) >= KERNEL_REGION_ID))
if (pc_esid == stack_esid)
return;
if (!IS_VALID_EA(stack) || (REGION_ID(stack) >= KERNEL_REGION_ID))
return;
vsid = get_vsid(mm->context, stack);
__ste_allocate(GET_ESID(stack), vsid, 0, mm->context);
}
}
__slb_allocate(stack_esid, vsid, mm->context);
if (!(cur_cpu_spec->cpu_features & CPU_FTR_SLB)) {
/* Order update */
asm volatile("sync" : : : "memory");
}
if (pc_esid == unmapped_base_esid || stack_esid == unmapped_base_esid)
return;
if (!IS_VALID_EA(unmapped_base) ||
(REGION_ID(unmapped_base) >= KERNEL_REGION_ID))
return;
vsid = get_vsid(mm->context, unmapped_base);
__slb_allocate(unmapped_base_esid, vsid, mm->context);
}
/* Flush all user entries from the segment table of the current processor. */
void flush_stab(struct task_struct *tsk, struct mm_struct *mm)
void flush_slb(struct task_struct *tsk, struct mm_struct *mm)
{
if (cur_cpu_spec->cpu_features & CPU_FTR_SLB) {
/*
* XXX disable 32bit slb invalidate optimisation until we fix
* the issue where a 32bit app execed out of a 64bit app can
* cause segments above 4GB not to be flushed - Anton
*/
if (0 && !STAB_PRESSURE && test_thread_flag(TIF_32BIT)) {
unsigned long *offset = &__get_cpu_var(stab_cache_ptr);
if (*offset <= NR_STAB_CACHE_ENTRIES) {
int i;
union {
unsigned long word0;
slb_dword0 data;
} esid_data;
unsigned long esid;
asm volatile("isync" : : : "memory");
for (esid = 0; esid < 16; esid++) {
for (i = 0; i < *offset; i++) {
esid_data.word0 = 0;
esid_data.data.esid = esid;
esid_data.data.esid = __get_cpu_var(stab_cache[i]);
asm volatile("slbie %0" : : "r" (esid_data));
}
asm volatile("isync" : : : "memory");
} else {
asm volatile("isync; slbia; isync":::"memory");
}
PMC_SW_PROCESSOR(stab_invalidations);
} else {
STE *stab = (STE *) get_paca()->xStab_data.virt;
STE *ste;
unsigned long flags;
/* Force previous translations to complete. DRENG */
asm volatile("isync" : : : "memory");
local_irq_save(flags);
if (get_paca()->stab_cache_pointer != 0xff && !STAB_PRESSURE) {
int i;
unsigned char *segments = get_paca()->xSegments;
for (i = 0; i < get_paca()->stab_cache_pointer; i++) {
ste = stab + segments[i];
ste->dw0.dw0.v = 0;
PMC_SW_PROCESSOR(stab_invalidations);
}
#if USE_SLBIE_ON_STAB
asm volatile("sync":::"memory");
for (i = 0; i < get_paca()->stab_cache_pointer; i++) {
ste = stab + segments[i];
asm volatile("slbie %0" : :
"r" (ste->dw0.dw0.esid << SID_SHIFT));
}
asm volatile("sync":::"memory");
#else
asm volatile("sync; slbia; sync":::"memory");
#endif
} else {
unsigned long entry;
/* Invalidate all entries. */
ste = stab;
/* Never flush the first entry. */
ste += 1;
for (entry = 1;
entry < (PAGE_SIZE / sizeof(STE));
entry++, ste++) {
unsigned long ea;
ea = ste->dw0.dw0.esid << SID_SHIFT;
if (STAB_PRESSURE || ea < KERNELBASE) {
ste->dw0.dw0.v = 0;
PMC_SW_PROCESSOR(stab_invalidations);
}
}
asm volatile("sync; slbia; sync":::"memory");
asm volatile("isync; slbia; isync" : : : "memory");
}
get_paca()->stab_cache_pointer = 0;
local_irq_restore(flags);
}
*offset = 0;
if (ppc64_stab_preload)
preload_stab(tsk, mm);
preload_slb(tsk, mm);
}
arch/ppc64/kernel/sys_ppc32.c
View file @ 27e0f0fe
......@@ -14,6 +14,7 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <asm/ptrace.h>
#include <linux/kernel.h>
#include <linux/sched.h>
......@@ -2845,6 +2846,7 @@ long ppc32_timer_create(clockid_t clock,
return -EFAULT;
savefs = get_fs();
set_fs(KERNEL_DS);
err = sys_timer_create(clock, &event, &t);
set_fs(savefs);
......
arch/ppc64/kernel/viopath.c
View file @ 27e0f0fe
......@@ -28,7 +28,6 @@
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/config.h>
#include <asm/uaccess.h>
#include <linux/module.h>
#include <linux/kernel.h>
......
arch/ppc64/mm/hash_low.S
View file @ 27e0f0fe
......@@ -10,7 +10,6 @@
* described in the kernel's COPYING file.
*/
#include <linux/config.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
......
arch/ppc64/mm/hugetlbpage.c
View file @ 27e0f0fe
......@@ -7,7 +7,6 @@
* Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mm.h>
......@@ -655,10 +654,9 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
unsigned long hpteflags, prpn, flags;
long slot;
ea &= ~(HPAGE_SIZE-1);
/* We have to find the first hugepte in the batch, since
* that's the one that will store the HPTE flags */
ea &= HPAGE_MASK;
ptep = hugepte_offset(mm, ea);
/* Search the Linux page table for a match with va */
......@@ -886,10 +884,11 @@ static int __init hugetlb_init(void)
spin_unlock(&htlbpage_lock);
}
htlbpage_max = htlbpage_free = htlbpage_total = i;
printk("Total HugeTLB memory allocated, %d\n", htlbpage_free);
printk(KERN_INFO "Total HugeTLB memory allocated, %d\n",
htlbpage_free);
} else {
htlbpage_max = 0;
printk("CPU does not support HugeTLB\n");
printk(KERN_INFO "CPU does not support HugeTLB\n");
}
return 0;
......
arch/ppc64/xmon/start.c
View file @ 27e0f0fe
......@@ -6,8 +6,10 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sysrq.h>
#include <asm/machdep.h>
#include <asm/io.h>
......@@ -28,11 +30,14 @@ static inline unsigned int readtb(void)
return ret;
}
#ifdef CONFIG_MAGIC_SYSRQ
static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs,
struct tty_struct *tty)
{
xmon(pt_regs);
}
static struct sysrq_key_op sysrq_xmon_op =
{
.handler = sysrq_handle_xmon,
......@@ -40,11 +45,15 @@ static struct sysrq_key_op sysrq_xmon_op =
.action_msg = "Entering xmon\n",
};
#endif /* CONFIG_MAGIC_SYSRQ */
void
xmon_map_scc(void)
{
#ifdef CONFIG_MAGIC_SYSRQ
/* This maybe isn't the best place to register sysrq 'x' */
__sysrq_put_key_op('x', &sysrq_xmon_op);
#endif /* CONFIG_MAGIC_SYSRQ */
}
int
......
arch/s390/Makefile
View file @ 27e0f0fe
......@@ -70,3 +70,8 @@ include/asm-$(ARCH)/offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
$(call filechk,gen-asm-offsets)
CLEAN_FILES += include/asm-$(ARCH)/offsets.h
# Don't use tabs in echo arguments
define archhelp
echo '* image - Kernel image for IPL ($(boot)/image)'
endef
arch/s390/defconfig
View file @ 27e0f0fe
......@@ -147,6 +147,7 @@ CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_BLK_DEV_DM is not set
......
arch/s390/kernel/compat_linux.c
View file @ 27e0f0fe
......@@ -1912,6 +1912,7 @@ do_execve32(char * filename, u32 * argv, u32 * envp, struct pt_regs * regs)
security_bprm_free(&bprm);
out_mm:
if (bprm.mm)
mmdrop(bprm.mm);
out_file:
......
arch/s390/kernel/s390_ksyms.c
View file @ 27e0f0fe
......@@ -9,6 +9,7 @@
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/ioctl32.h>
#include <asm/checksum.h>
#include <asm/cpcmd.h>
#include <asm/delay.h>
......@@ -74,4 +75,5 @@ EXPORT_SYMBOL(console_device);
EXPORT_SYMBOL_NOVERS(do_call_softirq);
EXPORT_SYMBOL(sys_wait4);
EXPORT_SYMBOL(cpcmd);
EXPORT_SYMBOL(sys_ioctl);
arch/s390/mm/init.c
View file @ 27e0f0fe
......@@ -79,8 +79,6 @@ extern unsigned long __init_end;
* paging_init() sets up the page tables
*/
unsigned long last_valid_pfn;
#ifndef CONFIG_ARCH_S390X
void __init paging_init(void)
{
......
drivers/md/raid6x86.h
View file @ 27e0f0fe
......@@ -32,18 +32,20 @@ typedef struct {
/* N.B.: For SSE we only save %xmm0-%xmm7 even for x86-64, since
the code doesn't know about the additional x86-64 registers */
typedef struct {
unsigned int sarea[8*4];
unsigned int cr0;
unsigned int sarea[8*4+2];
unsigned long cr0;
} raid6_sse_save_t __attribute__((aligned(16)));
/* This is for x86-64-specific code which uses all 16 XMM registers */
typedef struct {
unsigned int sarea[16*4];
unsigned int sarea[16*4+2];
unsigned long cr0;
} raid6_sse16_save_t __attribute__((aligned(16)));
/* On x86-64 the stack is 16-byte aligned */
#define SAREA(x) (x->sarea)
/* On x86-64 the stack *SHOULD* be 16-byte aligned, but currently this
is buggy in the kernel and it's only 8-byte aligned in places, so
we need to do this anyway. Sigh. */
#define SAREA(x) ((unsigned int *)((((unsigned long)&(x)->sarea)+15) & ~15))
#else /* __i386__ */
......@@ -60,6 +62,7 @@ typedef struct {
unsigned long cr0;
} raid6_sse_save_t;
/* Find the 16-byte aligned save area */
#define SAREA(x) ((unsigned int *)((((unsigned long)&(x)->sarea)+15) & ~15))
#endif
......
drivers/s390/char/sclp.c
View file @ 27e0f0fe
......@@ -315,7 +315,8 @@ sclp_interrupt_handler(struct pt_regs *regs, __u16 code)
/* Head queue a read sccb if an event buffer is pending */
if (evbuf_pending)
__sclp_unconditional_read();
/* Now clear the running bit */
/* Now clear the running bit if SCLP indicated a finished SCCB */
if (finished_sccb != 0U)
clear_bit(SCLP_RUNNING, &sclp_status);
spin_unlock(&sclp_lock);
/* and start next request on the queue */
......
drivers/s390/char/sclp_con.c
View file @ 27e0f0fe
......@@ -149,7 +149,8 @@ sclp_console_write(struct console *console, const char *message,
count -= written;
} while (count > 0);
/* Setup timer to output current console buffer after 1/10 second */
if (sclp_conbuf != NULL && !timer_pending(&sclp_con_timer)) {
if (sclp_conbuf != NULL && sclp_chars_in_buffer(sclp_conbuf) != 0 &&
!timer_pending(&sclp_con_timer)) {
init_timer(&sclp_con_timer);
sclp_con_timer.function = sclp_console_timeout;
sclp_con_timer.data = 0UL;
......
drivers/s390/char/sclp_rw.c
View file @ 27e0f0fe
......@@ -274,7 +274,7 @@ sclp_write(struct sclp_buffer *buffer, const unsigned char *msg, int count)
if (buffer->current_line != NULL)
sclp_finalize_mto(buffer);
/* skip the rest of the message including the 0 byte */
i_msg = count;
i_msg = count - 1;
break;
default: /* no escape character */
/* do not output unprintable characters */
......
drivers/s390/char/sclp_tty.c
View file @ 27e0f0fe
......@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/uaccess.h>
#include "ctrlchar.h"
......@@ -337,6 +338,9 @@ sclp_tty_write_string(const unsigned char *str, int count)
if (sclp_ttybuf == NULL) {
while (list_empty(&sclp_tty_pages)) {
spin_unlock_irqrestore(&sclp_tty_lock, flags);
if (in_interrupt())
sclp_sync_wait();
else
wait_event(sclp_tty_waitq,
!list_empty(&sclp_tty_pages));
spin_lock_irqsave(&sclp_tty_lock, flags);
......@@ -366,7 +370,9 @@ sclp_tty_write_string(const unsigned char *str, int count)
} while (count > 0);
/* Setup timer to output current console buffer after 1/10 second */
if (sclp_ioctls.final_nl) {
if (sclp_ttybuf != NULL && !timer_pending(&sclp_tty_timer)) {
if (sclp_ttybuf != NULL &&
sclp_chars_in_buffer(sclp_ttybuf) != 0 &&
!timer_pending(&sclp_tty_timer)) {
init_timer(&sclp_tty_timer);
sclp_tty_timer.function = sclp_tty_timeout;
sclp_tty_timer.data = 0UL;
......@@ -374,8 +380,14 @@ sclp_tty_write_string(const unsigned char *str, int count)
add_timer(&sclp_tty_timer);
}
} else {
__sclp_ttybuf_emit(sclp_ttybuf);
if (sclp_ttybuf != NULL &&
sclp_chars_in_buffer(sclp_ttybuf) != 0) {
buf = sclp_ttybuf;
sclp_ttybuf = NULL;
spin_unlock_irqrestore(&sclp_tty_lock, flags);
__sclp_ttybuf_emit(buf);
spin_lock_irqsave(&sclp_tty_lock, flags);
}
}
spin_unlock_irqrestore(&sclp_tty_lock, flags);
}
......@@ -471,7 +483,7 @@ sclp_tty_chars_in_buffer(struct tty_struct *tty)
count = sclp_chars_in_buffer(sclp_ttybuf);
list_for_each(l, &sclp_tty_outqueue) {
t = list_entry(l, struct sclp_buffer, list);
count += sclp_chars_in_buffer(sclp_ttybuf);
count += sclp_chars_in_buffer(t);
}
spin_unlock_irqrestore(&sclp_tty_lock, flags);
return count;
......
drivers/s390/cio/device.c
View file @ 27e0f0fe
......@@ -908,3 +908,4 @@ EXPORT_SYMBOL(ccw_driver_register);
EXPORT_SYMBOL(ccw_driver_unregister);
EXPORT_SYMBOL(get_ccwdev_by_busid);
EXPORT_SYMBOL(ccw_bus_type);
EXPORT_SYMBOL(ccw_device_work);
drivers/s390/net/ctctty.c
View file @ 27e0f0fe
/*
* $Id: ctctty.c,v 1.14 2003/10/06 11:33:33 mschwide Exp $
* $Id: ctctty.c,v 1.15 2004/01/26 10:21:01 mschwide Exp $
*
* CTC / ESCON network driver, tty interface.
*
......@@ -759,9 +759,7 @@ ctc_tty_ioctl(struct tty_struct *tty, struct file *file,
info->line);
#endif
error = put_user(C_CLOCAL(tty) ? 1 : 0, (ulong *) arg);
if (error)
return error;
return 0;
case TIOCSSOFTCAR:
#ifdef CTC_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "%s%d ioctl TIOCSSOFTCAR\n", CTC_TTY_NAME,
......
drivers/usb/host/ehci-hub.c
View file @ 27e0f0fe
......@@ -113,7 +113,7 @@ ehci_hub_descriptor (
u16 temp;
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = 0; /* FIXME: f(system power) */
desc->bPwrOn2PwrGood = 10; /* FIXME: f(system power) */
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
......
include/asm-ppc/todc.h
View file @ 27e0f0fe
......@@ -290,8 +290,8 @@ typedef struct {
#define TODC_TYPE_MC146818_SECONDS 0x00
#define TODC_TYPE_MC146818_CNTL_B 0x0a
#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */
#define TODC_TYPE_MC146818_WATCHDOG 0x0c
#define TODC_TYPE_MC146818_INTERRUPTS 0x0d
#define TODC_TYPE_MC146818_WATCHDOG 0
#define TODC_TYPE_MC146818_INTERRUPTS 0x0c
#define TODC_TYPE_MC146818_ALARM_DATE 0xff
#define TODC_TYPE_MC146818_ALARM_HOUR 0x05
#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03
......
include/asm-ppc64/bugs.h
View file @ 27e0f0fe
......@@ -3,6 +3,10 @@
* bugs.
*
*/
#ifndef _ASM_PPC64_BUGS_H
#define _ASM_PPC64_BUGS_H
static void check_bugs(void) {
}
#endif /* _ASM_PPC64_BUGS_H */
include/asm-ppc64/cputable.h
View file @ 27e0f0fe
......@@ -15,6 +15,8 @@
#ifndef __ASM_PPC_CPUTABLE_H
#define __ASM_PPC_CPUTABLE_H
#include <linux/config.h>
/* Exposed to userland CPU features - Must match ppc32 definitions */
#define PPC_FEATURE_32 0x80000000
#define PPC_FEATURE_64 0x40000000
......@@ -133,10 +135,17 @@ extern firmware_feature_t firmware_features_table[];
#define COMMON_USER_PPC64 (PPC_FEATURE_32 | PPC_FEATURE_64 | \
PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_MMU)
#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | CPU_FTR_16M_PAGE | \
#define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \
CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
CPU_FTR_NODSISRALIGN)
/* iSeries doesn't support large pages */
#ifdef CONFIG_PPC_ISERIES
#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_PPCAS_ARCH_V2_BASE)
#else
#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_PPCAS_ARCH_V2_BASE | CPU_FTR_16M_PAGE)
#endif
#define COMMON_PPC64_FW (0)
#endif
......
include/asm-ppc64/hvcall.h
View file @ 27e0f0fe
#ifndef _PPC64_HVCALL_H
#define _PPC64_HVCALL_H
#define H_Success 0
#define H_Busy 1 /* Hardware busy -- retry later */
#define H_Constrained 4 /* Resource request constrained to max allowed */
#define H_Hardware -1 /* Hardware error */
#define H_Function -2 /* Function not supported */
#define H_Privilege -3 /* Caller not privileged */
......@@ -138,3 +141,4 @@ long plpar_hcall_4out(unsigned long opcode,
unsigned long *out3,
unsigned long *out4);
#endif /* _PPC64_HVCALL_H */
include/asm-ppc64/mmu.h
View file @ 27e0f0fe
......@@ -13,6 +13,7 @@
#ifndef _PPC64_MMU_H_
#define _PPC64_MMU_H_
#include <linux/config.h>
#include <asm/page.h>
#ifndef __ASSEMBLY__
......@@ -26,14 +27,6 @@ typedef unsigned long mm_context_t;
#define CONTEXT_LOW_HPAGES 0
#endif
/*
* Define the size of the cache used for segment table entries. The first
* entry is used as a cache pointer, therefore the actual number of entries
* stored is one less than defined here. Do not change this value without
* considering the impact it will have on the layout of the paca in paca.h.
*/
#define STAB_CACHE_SIZE 16
/*
* Hardware Segment Lookaside Buffer Entry
* This structure has been padded out to two 64b doublewords (actual SLBE's are
......
include/asm-ppc64/mmu_context.h
View file @ 27e0f0fe
#ifndef __PPC64_MMU_CONTEXT_H
#define __PPC64_MMU_CONTEXT_H
#include <linux/config.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/mm.h>
......@@ -138,6 +139,7 @@ destroy_context(struct mm_struct *mm)
}
extern void flush_stab(struct task_struct *tsk, struct mm_struct *mm);
extern void flush_slb(struct task_struct *tsk, struct mm_struct *mm);
/*
* switch_mm is the entry point called from the architecture independent
......@@ -153,6 +155,14 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
: : );
#endif /* CONFIG_ALTIVEC */
/* No need to flush userspace segments if the mm doesnt change */
if (prev == next)
return;
if (cur_cpu_spec->cpu_features & CPU_FTR_SLB)
flush_slb(tsk, next);
else
flush_stab(tsk, next);
cpu_set(smp_processor_id(), next->cpu_vm_mask);
}
......
include/asm-ppc64/paca.h
View file @ 27e0f0fe
......@@ -63,20 +63,15 @@ struct paca_struct {
u16 xPacaIndex; /* Logical processor number 0x18 */
u16 xHwProcNum; /* Physical processor number 0x1A */
u32 default_decr; /* Default decrementer value 0x1c */
u64 unused1;
u64 xKsave; /* Saved Kernel stack addr or zero 0x28 */
u64 pvr; /* Processor version register 0x30 */
u8 *exception_sp; /* 0x38 */
struct ItLpQueue *lpQueuePtr; /* LpQueue handled by this processor 0x40 */
u64 xTOC; /* Kernel TOC address 0x48 */
STAB xStab_data; /* Segment table information 0x50,0x58,0x60 */
u8 xSegments[STAB_CACHE_SIZE]; /* Cache of used stab entries 0x68,0x70 */
u8 xProcEnabled; /* 1=soft enabled 0x78 */
u8 unused2;
u8 prof_enabled; /* 1=iSeries profiling enabled 0x7A */
u8 stab_cache_pointer;
u8 resv1[4]; /* 0x7B-0x7F */
u64 xKsave; /* Saved Kernel stack addr or zero 0x20 */
u64 pvr; /* Processor version register 0x28 */
struct ItLpQueue *lpQueuePtr; /* LpQueue handled by this processor 0x30 */
u64 xTOC; /* Kernel TOC address 0x38 */
STAB xStab_data; /* Segment table information 0x40,0x48,0x50 */
u8 *exception_sp; /* 0x58 */
u8 xProcEnabled; /* 0x59 */
u8 prof_enabled; /* 1=iSeries profiling enabled 0x60 */
u8 resv1[30]; /* 0x61-0x7F */
/*=====================================================================================
* CACHE_LINE_2 0x0080 - 0x00FF
......
include/asm-ppc64/percpu.h
View file @ 27e0f0fe
#ifndef __ARCH_I386_PERCPU__
#define __ARCH_I386_PERCPU__
#ifndef __ARCH_PPC64_PERCPU__
#define __ARCH_PPC64_PERCPU__
#include <asm-generic/percpu.h>
#endif /* __ARCH_I386_PERCPU__ */
#endif /* __ARCH_PPC64_PERCPU__ */
include/asm-ppc64/pgtable.h
View file @ 27e0f0fe
......@@ -7,6 +7,7 @@
*/
#ifndef __ASSEMBLY__
#include <linux/config.h>
#include <linux/stddef.h>
#include <asm/processor.h> /* For TASK_SIZE */
#include <asm/mmu.h>
......
include/asm-ppc64/ppc_asm.h
View file @ 27e0f0fe
......@@ -11,6 +11,8 @@
* 2 of the License, or (at your option) any later version.
*/
#ifndef _PPC64_PPC_ASM_H
#define _PPC64_PPC_ASM_H
/*
* Macros for storing registers into and loading registers from
* exception frames.
......@@ -238,3 +240,5 @@
#define vr29 29
#define vr30 30
#define vr31 31
#endif /* _PPC64_PPC_ASM_H */
include/asm-ppc64/processor.h
View file @ 27e0f0fe
......@@ -12,6 +12,7 @@
#include <linux/stringify.h>
#ifndef __ASSEMBLY__
#include <linux/config.h>
#include <asm/atomic.h>
#include <asm/ppcdebug.h>
#include <asm/a.out.h>
......
include/asm-ppc64/ptrace-common.h
View file @ 27e0f0fe
......@@ -9,6 +9,8 @@
* this archive for more details.
*/
#ifndef _PPC64_PTRACE_COMMON_H
#define _PPC64_PTRACE_COMMON_H
/*
* Set of msr bits that gdb can change on behalf of a process.
*/
......@@ -64,3 +66,5 @@ static inline void clear_single_step(struct task_struct *task)
if (regs != NULL)
regs->msr &= ~MSR_SE;
}
#endif /* _PPC64_PTRACE_COMMON_H */
include/asm-ppc64/serial.h
View file @ 27e0f0fe
/*
* include/asm-ppc/serial.h
* include/asm-ppc64/serial.h
*/
#ifndef _PPC64_SERIAL_H
#define _PPC64_SERIAL_H
#include <linux/config.h>
......@@ -124,3 +126,5 @@
EXTRA_SERIAL_PORT_DEFNS \
HUB6_SERIAL_PORT_DFNS \
MCA_SERIAL_PORT_DFNS
#endif /* _PPC64_SERIAL_H */
include/asm-s390/atomic.h
View file @ 27e0f0fe
#ifndef __ARCH_S390_ATOMIC__
#define __ARCH_S390_ATOMIC__
#ifdef __KERNEL__
/*
* include/asm-s390/atomic.h
*
......@@ -27,6 +26,8 @@ typedef struct {
} __attribute__ ((aligned (4))) atomic_t;
#define ATOMIC_INIT(i) { (i) }
#ifdef __KERNEL__
#define __CS_LOOP(ptr, op_val, op_string) ({ \
typeof(ptr->counter) old_val, new_val; \
__asm__ __volatile__(" l %0,0(%3)\n" \
......@@ -35,8 +36,10 @@ typedef struct {
" cs %0,%1,0(%3)\n" \
" jl 0b" \
: "=&d" (old_val), "=&d" (new_val), \
"+m" (((atomic_t *)(ptr))->counter) \
: "a" (ptr), "d" (op_val) : "cc" ); \
"=m" (((atomic_t *)(ptr))->counter) \
: "a" (ptr), "d" (op_val), \
"m" (((atomic_t *)(ptr))->counter) \
: "cc", "memory" ); \
new_val; \
})
#define atomic_read(v) ((v)->counter)
......@@ -106,8 +109,10 @@ typedef struct {
" csg %0,%1,0(%3)\n" \
" jl 0b" \
: "=&d" (old_val), "=&d" (new_val), \
"+m" (((atomic_t *)(ptr))->counter) \
: "a" (ptr), "d" (op_val) : "cc" ); \
"=m" (((atomic_t *)(ptr))->counter) \
: "a" (ptr), "d" (op_val), \
"m" (((atomic_t *)(ptr))->counter) \
: "cc", "memory" ); \
new_val; \
})
#define atomic64_read(v) ((v)->counter)
......@@ -182,9 +187,9 @@ atomic_compare_and_swap(int expected_oldval,int new_val,atomic_t *v)
" ipm %0\n"
" srl %0,28\n"
"0:"
: "=&d" (retval), "+m" (v->counter)
: "a" (v), "d" (expected_oldval) , "d" (new_val)
: "cc" );
: "=&d" (retval), "=m" (v->counter)
: "a" (v), "d" (expected_oldval) , "d" (new_val),
"m" (v->counter) : "cc", "memory" );
return retval;
}
......
include/asm-s390/bitops.h
View file @ 27e0f0fe
......@@ -13,6 +13,7 @@
*
*/
#include <linux/config.h>
#include <linux/compiler.h>
/*
* 32 bit bitops format:
......@@ -109,6 +110,8 @@ extern const char _sb_findmap[];
#endif /* __s390x__ */
#define __BITOPS_BARRIER() __asm__ __volatile__ ( "" : : : "memory" )
#ifdef CONFIG_SMP
/*
* SMP safe set_bit routine based on compare and swap (CS)
......@@ -189,6 +192,7 @@ test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
/* Do the atomic update. */
__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
__BITOPS_BARRIER();
return (old & mask) != 0;
}
......@@ -211,6 +215,7 @@ test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
/* Do the atomic update. */
__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
__BITOPS_BARRIER();
return (old ^ new) != 0;
}
......@@ -233,6 +238,7 @@ test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
/* Do the atomic update. */
__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
__BITOPS_BARRIER();
return (old & mask) != 0;
}
#endif /* CONFIG_SMP */
......@@ -435,7 +441,7 @@ test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
asm volatile("oc 0(1,%1),0(%2)"
: "=m" (*(char *) addr)
: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
"m" (*(char *) addr) : "cc" );
"m" (*(char *) addr) : "cc", "memory" );
return (ch >> (nr & 7)) & 1;
}
#define __test_and_set_bit(X,Y) test_and_set_bit_simple(X,Y)
......@@ -454,7 +460,7 @@ test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
asm volatile("nc 0(1,%1),0(%2)"
: "=m" (*(char *) addr)
: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
"m" (*(char *) addr) : "cc" );
"m" (*(char *) addr) : "cc", "memory" );
return (ch >> (nr & 7)) & 1;
}
#define __test_and_clear_bit(X,Y) test_and_clear_bit_simple(X,Y)
......@@ -473,7 +479,7 @@ test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
asm volatile("xc 0(1,%1),0(%2)"
: "=m" (*(char *) addr)
: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
"m" (*(char *) addr) : "cc" );
"m" (*(char *) addr) : "cc", "memory" );
return (ch >> (nr & 7)) & 1;
}
#define __test_and_change_bit(X,Y) test_and_change_bit_simple(X,Y)
......@@ -681,59 +687,6 @@ find_next_bit (unsigned long * addr, int size, int offset)
return (offset + res);
}
/*
* ffz = Find First Zero in word. Undefined if no zero exists,
* so code should check against ~0UL first..
*/
static inline unsigned long ffz(unsigned long word)
{
unsigned long reg;
int result;
__asm__(" slr %0,%0\n"
" lhi %2,0xff\n"
" tml %1,0xffff\n"
" jno 0f\n"
" ahi %0,16\n"
" srl %1,16\n"
"0: tml %1,0x00ff\n"
" jno 1f\n"
" ahi %0,8\n"
" srl %1,8\n"
"1: nr %1,%2\n"
" ic %1,0(%1,%3)\n"
" alr %0,%1"
: "=&d" (result), "+a" (word), "=&d" (reg)
: "a" (&_zb_findmap) : "cc" );
return result;
}
/*
* __ffs = find first bit in word. Undefined if no bit exists,
* so code should check against 0UL first..
*/
static inline unsigned long __ffs (unsigned long word)
{
unsigned long reg, result;
__asm__(" slr %0,%0\n"
" lhi %2,0xff\n"
" tml %1,0xffff\n"
" jnz 0f\n"
" ahi %0,16\n"
" srl %1,16\n"
"0: tml %1,0x00ff\n"
" jnz 1f\n"
" ahi %0,8\n"
" srl %1,8\n"
"1: nr %1,%2\n"
" ic %1,0(%1,%3)\n"
" alr %0,%1"
: "=&d" (result), "+a" (word), "=&d" (reg)
: "a" (&_sb_findmap) : "cc" );
return result;
}
#else /* __s390x__ */
/*
......@@ -910,35 +863,31 @@ find_next_bit (unsigned long * addr, unsigned long size, unsigned long offset)
return (offset + res);
}
#endif /* __s390x__ */
/*
* ffz = Find First Zero in word. Undefined if no zero exists,
* so code should check against ~0UL first..
*/
static inline unsigned long ffz(unsigned long word)
{
unsigned long reg, result;
unsigned long bit = 0;
__asm__(" lhi %2,-1\n"
" slgr %0,%0\n"
" clr %1,%2\n"
" jne 0f\n"
" aghi %0,32\n"
" srlg %1,%1,32\n"
"0: lghi %2,0xff\n"
" tmll %1,0xffff\n"
" jno 1f\n"
" aghi %0,16\n"
" srlg %1,%1,16\n"
"1: tmll %1,0x00ff\n"
" jno 2f\n"
" aghi %0,8\n"
" srlg %1,%1,8\n"
"2: ngr %1,%2\n"
" ic %1,0(%1,%3)\n"
" algr %0,%1"
: "=&d" (result), "+a" (word), "=&d" (reg)
: "a" (&_zb_findmap) : "cc" );
return result;
#ifdef __s390x__
if (likely((word & 0xffffffff) == 0xffffffff)) {
word >>= 32;
bit += 32;
}
#endif
if (likely((word & 0xffff) == 0xffff)) {
word >>= 16;
bit += 16;
}
if (likely((word & 0xff) == 0xff)) {
word >>= 8;
bit += 8;
}
return bit + _zb_findmap[word & 0xff];
}
/*
......@@ -947,32 +896,25 @@ static inline unsigned long ffz(unsigned long word)
*/
static inline unsigned long __ffs (unsigned long word)
{
unsigned long reg, result;
unsigned long bit = 0;
__asm__(" slgr %0,%0\n"
" ltr %1,%1\n"
" jnz 0f\n"
" aghi %0,32\n"
" srlg %1,%1,32\n"
"0: lghi %2,0xff\n"
" tmll %1,0xffff\n"
" jnz 1f\n"
" aghi %0,16\n"
" srlg %1,%1,16\n"
"1: tmll %1,0x00ff\n"
" jnz 2f\n"
" aghi %0,8\n"
" srlg %1,%1,8\n"
"2: ngr %1,%2\n"
" ic %1,0(%1,%3)\n"
" algr %0,%1"
: "=&d" (result), "+a" (word), "=&d" (reg)
: "a" (&_sb_findmap) : "cc" );
return result;
#ifdef __s390x__
if (likely((word & 0xffffffff) == 0)) {
word >>= 32;
bit += 32;
}
#endif
if (likely((word & 0xffff) == 0)) {
word >>= 16;
bit += 16;
}
if (likely((word & 0xff) == 0)) {
word >>= 8;
bit += 8;
}
return bit + _sb_findmap[word & 0xff];
}
#endif /* __s390x__ */
/*
* Every architecture must define this function. It's the fastest
* way of searching a 140-bit bitmap where the first 100 bits are
......@@ -989,68 +931,12 @@ static inline int sched_find_first_bit(unsigned long *b)
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
extern inline int ffs (int x)
{
int r = 1;
if (x == 0)
return 0;
__asm__(" tml %1,0xffff\n"
" jnz 0f\n"
" srl %1,16\n"
" ahi %0,16\n"
"0: tml %1,0x00ff\n"
" jnz 1f\n"
" srl %1,8\n"
" ahi %0,8\n"
"1: tml %1,0x000f\n"
" jnz 2f\n"
" srl %1,4\n"
" ahi %0,4\n"
"2: tml %1,0x0003\n"
" jnz 3f\n"
" srl %1,2\n"
" ahi %0,2\n"
"3: tml %1,0x0001\n"
" jnz 4f\n"
" ahi %0,1\n"
"4:"
: "=&d" (r), "+d" (x) : : "cc" );
return r;
}
#define ffs(x) generic_ffs(x)
/*
* fls: find last bit set.
*/
static __inline__ int fls(int x)
{
int r = 32;
if (x == 0)
return 0;
__asm__(" tmh %1,0xffff\n"
" jz 0f\n"
" sll %1,16\n"
" ahi %0,-16\n"
"0: tmh %1,0xff00\n"
" jz 1f\n"
" sll %1,8\n"
" ahi %0,-8\n"
"1: tmh %1,0xf000\n"
" jz 2f\n"
" sll %1,4\n"
" ahi %0,-4\n"
"2: tmh %1,0xc000\n"
" jz 3f\n"
" sll %1,2\n"
" ahi %0,-2\n"
"3: tmh %1,0x8000\n"
" jz 4f\n"
" ahi %0,-1\n"
"4:"
: "+d" (r), "+d" (x) : : "cc" );
return r;
}
#define fls(x) generic_fls(x)
/*
* hweightN: returns the hamming weight (i.e. the number
......@@ -1273,11 +1159,16 @@ ext2_find_next_zero_bit(void *vaddr, unsigned long size, unsigned long offset)
/* Bitmap functions for the minix filesystem. */
/* FIXME !!! */
#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
#define minix_set_bit(nr,addr) set_bit(nr,addr)
#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
#define minix_test_bit(nr,addr) test_bit(nr,addr)
#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
#define minix_test_and_set_bit(nr,addr) \
test_and_set_bit(nr,(unsigned long *)addr)
#define minix_set_bit(nr,addr) \
set_bit(nr,(unsigned long *)addr)
#define minix_test_and_clear_bit(nr,addr) \
test_and_clear_bit(nr,(unsigned long *)addr)
#define minix_test_bit(nr,addr) \
test_bit(nr,(unsigned long *)addr)
#define minix_find_first_zero_bit(addr,size) \
find_first_zero_bit(addr,size)
#endif /* __KERNEL__ */
......
include/asm-s390/byteorder.h
View file @ 27e0f0fe
......@@ -50,7 +50,7 @@ static __inline__ __u32 ___arch__swab32p(__u32 *x)
" icm %0,4,2(%1)\n"
" icm %0,2,1(%1)\n"
" ic %0,0(%1)"
: "=&d" (result) : "a" (x) : "cc" );
: "=&d" (result) : "a" (x), "m" (*x) : "cc" );
#else /* __s390x__ */
" lrv %0,%1"
: "=d" (result) : "m" (*x) );
......@@ -67,7 +67,7 @@ static __inline__ __u32 ___arch__swab32(__u32 x)
__asm__ __volatile__ (
" lrvr %0,%1"
: "=d" (result) : "d" (x) );
: "=d" (result) : "d" (x), "m" (x) );
return result;
#endif /* __s390x__ */
}
......@@ -85,7 +85,7 @@ static __inline__ __u16 ___arch__swab16p(__u16 *x)
#ifndef __s390x__
" icm %0,2,1(%1)\n"
" ic %0,0(%1)\n"
: "=&d" (result) : "a" (x) : "cc" );
: "=&d" (result) : "a" (x), "m" (*x) : "cc" );
#else /* __s390x__ */
" lrvh %0,%1"
: "=d" (result) : "m" (*x) );
......
include/asm-s390/checksum.h
View file @ 27e0f0fe
......@@ -42,7 +42,7 @@ csum_partial(const unsigned char * buff, int len, unsigned int sum)
__asm__ __volatile__ (
"0: cksm %0,%1\n" /* do checksum on longs */
" jo 0b\n"
: "+&d" (sum), "+&a" (rp) : : "cc" );
: "+&d" (sum), "+&a" (rp) : : "cc", "memory" );
#else /* __s390x__ */
__asm__ __volatile__ (
" lgr 2,%1\n" /* address in gpr 2 */
......@@ -51,7 +51,7 @@ csum_partial(const unsigned char * buff, int len, unsigned int sum)
" jo 0b\n"
: "+&d" (sum)
: "d" (buff), "d" (len)
: "cc", "2", "3" );
: "cc", "memory", "2", "3" );
#endif /* __s390x__ */
return sum;
}
......
include/asm-s390/div64.h
View file @ 27e0f0fe
......@@ -36,8 +36,8 @@
" ahi 1,1\n" \
"1: st 1,4+%1\n" \
" lr %0,0" \
: "=d" (__r), "+m" (__n) \
: "d" (base) : "0", "1", "2", "cc" ); \
: "=d" (__r), "=m" (__n) \
: "d" (base), "m" (__n) : "0", "1", "2", "cc" ); \
(n) = (__n); \
__r; \
})
......
include/asm-s390/pgtable.h
View file @ 27e0f0fe
......@@ -553,11 +553,15 @@ ptep_clear_flush(struct vm_area_struct *vma,
if (!(pte_val(pte) & _PAGE_INVALID)) {
/* S390 has 1mb segments, we are emulating 4MB segments */
pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
__asm__ __volatile__ ("ipte %0,%1" : : "a" (pto), "a" (address));
__asm__ __volatile__ ("ipte %2,%3"
: "=m" (*ptep) : "m" (*ptep),
"a" (pto), "a" (address) );
}
#else /* __s390x__ */
if (!(pte_val(pte) & _PAGE_INVALID))
__asm__ __volatile__ ("ipte %0,%1" : : "a" (ptep), "a" (address));
__asm__ __volatile__ ("ipte %2,%3"
: "=m" (*ptep) : "m" (*ptep),
"a" (ptep), "a" (address) );
#endif /* __s390x__ */
pte_clear(ptep);
return pte;
......
include/asm-s390/processor.h
View file @ 27e0f0fe
......@@ -66,7 +66,7 @@ extern struct task_struct *last_task_used_math;
#else /* __s390x__ */
# define TASK_SIZE (0x20000000000UL)
# define TASK_SIZE (0x40000000000UL)
# define TASK31_SIZE (0x80000000UL)
# define TASK_UNMAPPED_BASE (test_thread_flag(TIF_31BIT) ? \
(TASK31_SIZE / 2) : (TASK_SIZE / 2))
......@@ -200,14 +200,14 @@ static inline void __load_psw_mask (unsigned long mask)
" st %0,4(%1)\n"
" lpsw 0(%1)\n"
"1:"
: "=&d" (addr) : "a" (&psw) : "memory", "cc" );
: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc" );
#else /* __s390x__ */
asm volatile (
" larl %0,1f\n"
" stg %0,8(%1)\n"
" lpswe 0(%1)\n"
"1:"
: "=&d" (addr) : "a" (&psw) : "memory", "cc" );
: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc" );
#endif /* __s390x__ */
}
......@@ -229,14 +229,16 @@ static inline void enabled_wait(void)
" oi 4(%1),0x80\n"
" lpsw 0(%1)\n"
"1:"
: "=&a" (reg) : "a" (&wait_psw) : "memory", "cc" );
: "=&a" (reg) : "a" (&wait_psw), "m" (wait_psw)
: "memory", "cc" );
#else /* __s390x__ */
asm volatile (
" larl %0,0f\n"
" stg %0,8(%1)\n"
" lpswe 0(%1)\n"
"0:"
: "=&a" (reg) : "a" (&wait_psw) : "memory", "cc" );
: "=&a" (reg) : "a" (&wait_psw), "m" (wait_psw)
: "memory", "cc" );
#endif /* __s390x__ */
}
......@@ -247,7 +249,7 @@ static inline void enabled_wait(void)
static inline void disabled_wait(unsigned long code)
{
char psw_buffer[2*sizeof(psw_t)];
char ctl_buf[4];
unsigned long ctl_buf;
psw_t *dw_psw = (psw_t *)(((unsigned long) &psw_buffer+sizeof(psw_t)-1)
& -sizeof(psw_t));
......@@ -258,9 +260,9 @@ static inline void disabled_wait(unsigned long code)
* the processor is dead afterwards
*/
#ifndef __s390x__
asm volatile (" stctl 0,0,0(%1)\n"
" ni 0(%1),0xef\n" /* switch off protection */
" lctl 0,0,0(%1)\n"
asm volatile (" stctl 0,0,0(%2)\n"
" ni 0(%2),0xef\n" /* switch off protection */
" lctl 0,0,0(%2)\n"
" stpt 0xd8\n" /* store timer */
" stckc 0xe0\n" /* store clock comparator */
" stpx 0x108\n" /* store prefix register */
......@@ -271,13 +273,14 @@ static inline void disabled_wait(unsigned long code)
" std 6,0x178\n" /* store f6 */
" stm 0,15,0x180\n" /* store general registers */
" stctl 0,15,0x1c0\n" /* store control registers */
" oi 0(%1),0x10\n" /* fake protection bit */
" lpsw 0(%0)"
: : "a" (dw_psw), "a" (&ctl_buf) : "cc" );
" oi 0x1c0,0x10\n" /* fake protection bit */
" lpsw 0(%1)"
: "=m" (ctl_buf)
: "a" (dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc" );
#else /* __s390x__ */
asm volatile (" stctg 0,0,0(%1)\n"
" ni 4(%1),0xef\n" /* switch off protection */
" lctlg 0,0,0(%1)\n"
asm volatile (" stctg 0,0,0(%2)\n"
" ni 4(%2),0xef\n" /* switch off protection */
" lctlg 0,0,0(%2)\n"
" lghi 1,0x1000\n"
" stpt 0x328(1)\n" /* store timer */
" stckc 0x330(1)\n" /* store clock comparator */
......@@ -303,8 +306,10 @@ static inline void disabled_wait(unsigned long code)
" stmg 0,15,0x280(1)\n" /* store general registers */
" stctg 0,15,0x380(1)\n" /* store control registers */
" oi 0x384(1),0x10\n" /* fake protection bit */
" lpswe 0(%0)"
: : "a" (dw_psw), "a" (&ctl_buf) : "cc", "0", "1");
" lpswe 0(%1)"
: "=m" (ctl_buf)
: "a" (dw_psw), "a" (&ctl_buf),
"m" (dw_psw) : "cc", "0", "1");
#endif /* __s390x__ */
}
......
include/asm-s390/rwsem.h
View file @ 27e0f0fe
......@@ -102,21 +102,21 @@ static inline void __down_read(struct rw_semaphore *sem)
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" ahi %1,%3\n"
" cs %0,%1,0(%2)\n"
" ahi %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" aghi %1,%3\n"
" csg %0,%1,0(%2)\n"
" aghi %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "i" (RWSEM_ACTIVE_READ_BIAS)
: "cc", "memory" );
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count),
"i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory" );
if (old < 0)
rwsem_down_read_failed(sem);
}
......@@ -130,25 +130,25 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: ltr %1,%0\n"
" jm 1f\n"
" ahi %1,%3\n"
" cs %0,%1,0(%2)\n"
" ahi %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b\n"
"1:"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: ltgr %1,%0\n"
" jm 1f\n"
" aghi %1,%3\n"
" csg %0,%1,0(%2)\n"
" aghi %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b\n"
"1:"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "i" (RWSEM_ACTIVE_READ_BIAS)
: "cc", "memory" );
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count),
"i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory" );
return old >= 0 ? 1 : 0;
}
......@@ -162,20 +162,20 @@ static inline void __down_write(struct rw_semaphore *sem)
tmp = RWSEM_ACTIVE_WRITE_BIAS;
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" a %1,%3\n"
" cs %0,%1,0(%2)\n"
" a %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" ag %1,%3\n"
" csg %0,%1,0(%2)\n"
" ag %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "m" (tmp)
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count), "m" (tmp)
: "cc", "memory" );
if (old != 0)
rwsem_down_write_failed(sem);
......@@ -190,22 +190,22 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%1)\n"
" l %0,0(%2)\n"
"0: ltr %0,%0\n"
" jnz 1f\n"
" cs %0,%2,0(%1)\n"
" cs %0,%4,0(%2)\n"
" jl 0b\n"
#else /* __s390x__ */
" lg %0,0(%1)\n"
" lg %0,0(%2)\n"
"0: ltgr %0,%0\n"
" jnz 1f\n"
" csg %0,%2,0(%1)\n"
" csg %0,%4,0(%2)\n"
" jl 0b\n"
#endif /* __s390x__ */
"1:"
: "=&d" (old)
: "a" (&sem->count), "d" (RWSEM_ACTIVE_WRITE_BIAS)
: "cc", "memory" );
: "=&d" (old), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count),
"d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory" );
return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0;
}
......@@ -218,20 +218,21 @@ static inline void __up_read(struct rw_semaphore *sem)
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" ahi %1,%3\n"
" cs %0,%1,0(%2)\n"
" ahi %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" aghi %1,%3\n"
" csg %0,%1,0(%2)\n"
" aghi %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "i" (-RWSEM_ACTIVE_READ_BIAS)
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count),
"i" (-RWSEM_ACTIVE_READ_BIAS)
: "cc", "memory" );
if (new < 0)
if ((new & RWSEM_ACTIVE_MASK) == 0)
......@@ -248,20 +249,20 @@ static inline void __up_write(struct rw_semaphore *sem)
tmp = -RWSEM_ACTIVE_WRITE_BIAS;
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" a %1,%3\n"
" cs %0,%1,0(%2)\n"
" a %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" ag %1,%3\n"
" csg %0,%1,0(%2)\n"
" ag %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "m" (tmp)
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count), "m" (tmp)
: "cc", "memory" );
if (new < 0)
if ((new & RWSEM_ACTIVE_MASK) == 0)
......@@ -278,20 +279,20 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
tmp = -RWSEM_WAITING_BIAS;
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" a %1,%3\n"
" cs %0,%1,0(%2)\n"
" a %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" ag %1,%3\n"
" csg %0,%1,0(%2)\n"
" ag %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "m" (tmp)
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count), "m" (tmp)
: "cc", "memory" );
if (new > 1)
rwsem_downgrade_wake(sem);
......@@ -306,20 +307,20 @@ static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" ar %1,%3\n"
" cs %0,%1,0(%2)\n"
" ar %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" agr %1,%3\n"
" csg %0,%1,0(%2)\n"
" agr %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "d" (delta)
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count), "d" (delta)
: "cc", "memory" );
}
......@@ -332,20 +333,20 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
__asm__ __volatile__(
#ifndef __s390x__
" l %0,0(%2)\n"
" l %0,0(%3)\n"
"0: lr %1,%0\n"
" ar %1,%3\n"
" cs %0,%1,0(%2)\n"
" ar %1,%5\n"
" cs %0,%1,0(%3)\n"
" jl 0b"
#else /* __s390x__ */
" lg %0,0(%2)\n"
" lg %0,0(%3)\n"
"0: lgr %1,%0\n"
" agr %1,%3\n"
" csg %0,%1,0(%2)\n"
" agr %1,%5\n"
" csg %0,%1,0(%3)\n"
" jl 0b"
#endif /* __s390x__ */
: "=&d" (old), "=&d" (new)
: "a" (&sem->count), "d" (delta)
: "=&d" (old), "=&d" (new), "=m" (sem->count)
: "a" (&sem->count), "m" (sem->count), "d" (delta)
: "cc", "memory" );
return new;
}
......
include/asm-s390/semaphore.h
View file @ 27e0f0fe
......@@ -95,9 +95,9 @@ static inline int down_trylock(struct semaphore * sem)
" cs %0,%1,0(%3)\n"
" jl 0b\n"
"1:"
: "=&d" (old_val), "=&d" (new_val),
"+m" (sem->count.counter)
: "a" (&sem->count.counter) : "cc" );
: "=&d" (old_val), "=&d" (new_val), "=m" (sem->count.counter)
: "a" (&sem->count.counter), "m" (sem->count.counter)
: "cc", "memory" );
return old_val <= 0;
}
......
include/asm-s390/spinlock.h
View file @ 27e0f0fe
......@@ -57,8 +57,9 @@ extern inline void _raw_spin_lock(spinlock_t *lp)
"1: slr %1,%1\n"
" cs %1,%0,0(%3)\n"
" jl 0b\n"
: "=&d" (reg1), "=&d" (reg2), "+m" (lp->lock)
: "a" (&lp->lock) : "cc" );
: "=&d" (reg1), "=&d" (reg2), "=m" (lp->lock)
: "a" (&lp->lock), "m" (lp->lock)
: "cc", "memory" );
#else /* __s390x__ */
unsigned long reg1, reg2;
__asm__ __volatile(" bras %1,1f\n"
......@@ -66,9 +67,9 @@ extern inline void _raw_spin_lock(spinlock_t *lp)
"1: slr %0,%0\n"
" cs %0,%1,0(%3)\n"
" jl 0b\n"
: "=&d" (reg1), "=&d" (reg2), "+m" (lp->lock)
: "a" (&lp->lock), "i" (__DIAG44_OPERAND)
: "cc" );
: "=&d" (reg1), "=&d" (reg2), "=m" (lp->lock)
: "a" (&lp->lock), "i" (__DIAG44_OPERAND),
"m" (lp->lock) : "cc", "memory" );
#endif /* __s390x__ */
}
......@@ -82,8 +83,9 @@ extern inline int _raw_spin_trylock(spinlock_t *lp)
__asm__ __volatile(" slr %0,%0\n"
" basr %1,0\n"
"0: cs %0,%1,0(%3)"
: "=&d" (result), "=&d" (reg), "+m" (lp->lock)
: "a" (&lp->lock) : "cc" );
: "=&d" (result), "=&d" (reg), "=m" (lp->lock)
: "a" (&lp->lock), "m" (lp->lock)
: "cc", "memory" );
return !result;
}
......@@ -93,7 +95,8 @@ extern inline void _raw_spin_unlock(spinlock_t *lp)
__asm__ __volatile("cs %0,%3,0(%4)"
: "=d" (old), "=m" (lp->lock)
: "0" (lp->lock), "d" (0), "a" (lp) : "cc" );
: "0" (lp->lock), "d" (0), "a" (lp)
: "cc", "memory" );
}
/*
......@@ -126,8 +129,8 @@ typedef struct {
" la 3,1(2)\n" /* one more reader */ \
" cs 2,3,0(%1)\n" /* try to write new value */ \
" jl 0b" \
: "+m" ((rw)->lock) : "a" (&(rw)->lock) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) : "a" (&(rw)->lock), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#else /* __s390x__ */
#define _raw_read_lock(rw) \
asm volatile(" lg 2,0(%1)\n" \
......@@ -137,9 +140,9 @@ typedef struct {
" la 3,1(2)\n" /* one more reader */ \
" csg 2,3,0(%1)\n" /* try to write new value */ \
" jl 0b" \
: "+m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#endif /* __s390x__ */
#ifndef __s390x__
......@@ -151,8 +154,8 @@ typedef struct {
" ahi 3,-1\n" /* one less reader */ \
" cs 2,3,0(%1)\n" \
" jl 0b" \
: "+m" ((rw)->lock) : "a" (&(rw)->lock) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) : "a" (&(rw)->lock), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#else /* __s390x__ */
#define _raw_read_unlock(rw) \
asm volatile(" lg 2,0(%1)\n" \
......@@ -162,9 +165,9 @@ typedef struct {
" bctgr 3,0\n" /* one less reader */ \
" csg 2,3,0(%1)\n" \
" jl 0b" \
: "+m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#endif /* __s390x__ */
#ifndef __s390x__
......@@ -176,8 +179,8 @@ typedef struct {
"1: slr 2,2\n" /* old lock value must be 0 */ \
" cs 2,3,0(%1)\n" \
" jl 0b" \
: "+m" ((rw)->lock) : "a" (&(rw)->lock) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) : "a" (&(rw)->lock), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#else /* __s390x__ */
#define _raw_write_lock(rw) \
asm volatile(" llihh 3,0x8000\n" /* new lock value = 0x80...0 */ \
......@@ -186,9 +189,9 @@ typedef struct {
"1: slgr 2,2\n" /* old lock value must be 0 */ \
" csg 2,3,0(%1)\n" \
" jl 0b" \
: "+m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#endif /* __s390x__ */
#ifndef __s390x__
......@@ -200,8 +203,8 @@ typedef struct {
" sll 2,31\n" /* old lock value must be 0x80000000 */ \
" cs 2,3,0(%1)\n" \
" jl 0b" \
: "+m" ((rw)->lock) : "a" (&(rw)->lock) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) : "a" (&(rw)->lock), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#else /* __s390x__ */
#define _raw_write_unlock(rw) \
asm volatile(" slgr 3,3\n" /* new lock value = 0 */ \
......@@ -210,9 +213,9 @@ typedef struct {
"1: llihh 2,0x8000\n" /* old lock value must be 0x8..0 */\
" csg 2,3,0(%1)\n" \
" jl 0b" \
: "+m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND) \
: "2", "3", "cc" )
: "=m" ((rw)->lock) \
: "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
"m" ((rw)->lock) : "2", "3", "cc", "memory" )
#endif /* __s390x__ */
extern inline int _raw_write_trylock(rwlock_t *rw)
......@@ -230,8 +233,9 @@ extern inline int _raw_write_trylock(rwlock_t *rw)
" llihh %1,0x8000\n"
"0: csg %0,%1,0(%3)\n"
#endif /* __s390x__ */
: "=&d" (result), "=&d" (reg), "+m" (rw->lock)
: "a" (&rw->lock) : "cc" );
: "=&d" (result), "=&d" (reg), "=m" (rw->lock)
: "a" (&rw->lock), "m" (rw->lock)
: "cc", "memory" );
return result == 0;
}
......
include/asm-s390/system.h
View file @ 27e0f0fe
......@@ -32,28 +32,28 @@ extern struct task_struct *__switch_to(void *, void *);
static inline void save_fp_regs(s390_fp_regs *fpregs)
{
asm volatile (
" std 0,8(%0)\n"
" std 2,24(%0)\n"
" std 4,40(%0)\n"
" std 6,56(%0)"
: : "a" (fpregs) : "memory" );
" std 0,8(%1)\n"
" std 2,24(%1)\n"
" std 4,40(%1)\n"
" std 6,56(%1)"
: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory" );
if (!MACHINE_HAS_IEEE)
return;
asm volatile(
" stfpc 0(%0)\n"
" std 1,16(%0)\n"
" std 3,32(%0)\n"
" std 5,48(%0)\n"
" std 7,64(%0)\n"
" std 8,72(%0)\n"
" std 9,80(%0)\n"
" std 10,88(%0)\n"
" std 11,96(%0)\n"
" std 12,104(%0)\n"
" std 13,112(%0)\n"
" std 14,120(%0)\n"
" std 15,128(%0)\n"
: : "a" (fpregs) : "memory" );
" stfpc 0(%1)\n"
" std 1,16(%1)\n"
" std 3,32(%1)\n"
" std 5,48(%1)\n"
" std 7,64(%1)\n"
" std 8,72(%1)\n"
" std 9,80(%1)\n"
" std 10,88(%1)\n"
" std 11,96(%1)\n"
" std 12,104(%1)\n"
" std 13,112(%1)\n"
" std 14,120(%1)\n"
" std 15,128(%1)\n"
: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory" );
}
static inline void restore_fp_regs(s390_fp_regs *fpregs)
......@@ -63,7 +63,7 @@ static inline void restore_fp_regs(s390_fp_regs *fpregs)
" ld 2,24(%0)\n"
" ld 4,40(%0)\n"
" ld 6,56(%0)"
: : "a" (fpregs));
: : "a" (fpregs), "m" (*fpregs) );
if (!MACHINE_HAS_IEEE)
return;
asm volatile(
......@@ -80,7 +80,7 @@ static inline void restore_fp_regs(s390_fp_regs *fpregs)
" ld 13,112(%0)\n"
" ld 14,120(%0)\n"
" ld 15,128(%0)\n"
: : "a" (fpregs));
: : "a" (fpregs), "m" (*fpregs) );
}
#define switch_to(prev,next,last) do { \
......@@ -107,15 +107,15 @@ static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
shift = (3 ^ (addr & 3)) << 3;
addr ^= addr & 3;
asm volatile(
" l %0,0(%3)\n"
" l %0,0(%4)\n"
"0: lr 0,%0\n"
" nr 0,%2\n"
" or 0,%1\n"
" cs %0,0,0(%3)\n"
" nr 0,%3\n"
" or 0,%2\n"
" cs %0,0,0(%4)\n"
" jl 0b\n"
: "=&d" (old)
: "d" (x << shift), "d" (~(255 << shift)), "a" (addr)
: "memory", "cc", "0" );
: "=&d" (old), "=m" (*(int *) addr)
: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
"m" (*(int *) addr) : "memory", "cc", "0" );
x = old >> shift;
break;
case 2:
......@@ -123,34 +123,36 @@ static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
shift = (2 ^ (addr & 2)) << 3;
addr ^= addr & 2;
asm volatile(
" l %0,0(%3)\n"
" l %0,0(%4)\n"
"0: lr 0,%0\n"
" nr 0,%2\n"
" or 0,%1\n"
" cs %0,0,0(%3)\n"
" nr 0,%3\n"
" or 0,%2\n"
" cs %0,0,0(%4)\n"
" jl 0b\n"
: "=&d" (old)
: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr)
: "memory", "cc", "0" );
: "=&d" (old), "=m" (*(int *) addr)
: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
"m" (*(int *) addr) : "memory", "cc", "0" );
x = old >> shift;
break;
case 4:
asm volatile (
" l %0,0(%2)\n"
"0: cs %0,%1,0(%2)\n"
" l %0,0(%3)\n"
"0: cs %0,%2,0(%3)\n"
" jl 0b\n"
: "=&d" (old) : "d" (x), "a" (ptr)
: "memory", "cc", "0" );
: "=&d" (old), "=m" (*(int *) ptr)
: "d" (x), "a" (ptr), "m" (*(int *) ptr)
: "memory", "cc" );
x = old;
break;
#ifdef __s390x__
case 8:
asm volatile (
" lg %0,0(%2)\n"
"0: csg %0,%1,0(%2)\n"
" lg %0,0(%3)\n"
"0: csg %0,%2,0(%3)\n"
" jl 0b\n"
: "=&d" (old) : "d" (x), "a" (ptr)
: "memory", "cc", "0" );
: "=&d" (old), "=m" (*(long *) ptr)
: "d" (x), "a" (ptr), "m" (*(long *) ptr)
: "memory", "cc" );
x = old;
break;
#endif /* __s390x__ */
......@@ -268,7 +270,8 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
#define local_irq_enable() ({ \
unsigned long __dummy; \
__asm__ __volatile__ ( \
"stosm 0(%1),0x03" : "=m" (__dummy) : "a" (&__dummy) ); \
"stosm 0(%1),0x03" \
: "=m" (__dummy) : "a" (&__dummy) : "memory" ); \
})
#define local_irq_disable() ({ \
......@@ -279,10 +282,10 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
})
#define local_save_flags(x) \
__asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x) )
__asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x), "m" (x) )
#define local_irq_restore(x) \
__asm__ __volatile__("ssm 0(%0)" : : "a" (&x) : "memory")
__asm__ __volatile__("ssm 0(%0)" : : "a" (&x), "m" (x) : "memory")
#define irqs_disabled() \
({ \
......@@ -294,7 +297,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
#ifdef __s390x__
#define __load_psw(psw) \
__asm__ __volatile__("lpswe 0(%0)" : : "a" (&psw) : "cc" );
__asm__ __volatile__("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc" );
#define __ctl_load(array, low, high) ({ \
__asm__ __volatile__ ( \
......
include/asm-s390/timex.h
View file @ 27e0f0fe
......@@ -25,7 +25,7 @@ static inline cycles_t get_cycles(void)
{
cycles_t cycles;
__asm__("stck 0(%0)" : : "a" (&(cycles)) : "memory", "cc");
__asm__("stck 0(%1)" : "=m" (cycles) : "a" (&cycles) : "cc");
return cycles >> 2;
}
......@@ -33,7 +33,7 @@ static inline unsigned long long get_clock (void)
{
unsigned long long clk;
__asm__("stck 0(%0)" : : "a" (&(clk)) : "memory", "cc");
__asm__("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
return clk;
}
......
include/asm-s390/tlbflush.h
View file @ 27e0f0fe
......@@ -85,7 +85,7 @@ static inline void global_flush_tlb(void)
" slr 2,2\n"
" slr 3,3\n"
" csp 2,%0"
: : "a" (addr) : "cc", "2", "3" );
: : "a" (addr), "m" (dummy) : "cc", "2", "3" );
}
}
......
include/asm-s390/uaccess.h
View file @ 27e0f0fe
......@@ -124,8 +124,8 @@ struct exception_table_entry
"1:\n" \
__uaccess_fixup \
: "=&d" (err) \
: "a" (__to),"a" (__from),"K" (-EFAULT),"0" (0) \
: "cc" ); \
: "a" (__to),"a" (__from),"K" (-EFAULT),"0" (0),\
"m" (x) : "cc" ); \
})
#else /* __s390x__ */
......
include/linux/proc_fs.h
View file @ 27e0f0fe
......@@ -133,8 +133,14 @@ extern void proc_tty_unregister_driver(struct tty_driver *driver);
*/
struct device_node;
extern void proc_device_tree_init(void);
#ifdef CONFIG_PROC_DEVICETREE
extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
#else /* !CONFIG_PROC_DEVICETREE */
static inline void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *pde)
{
return;
}
#endif /* CONFIG_PROC_DEVICETREE */
/*
* proc_rtas.c
*/
......
kernel/exit.c
View file @ 27e0f0fe
......@@ -403,6 +403,8 @@ void put_files_struct(struct files_struct *files)
}
}
EXPORT_SYMBOL(put_files_struct);
static inline void __exit_files(struct task_struct *tsk)
{
struct files_struct * files = tsk->files;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7