Skip to content

L
linux
Commit 287050fe authored by Mike Frysinger's avatar Mike Frysinger Committed by Bryan Wu
Browse files
Options

Blackfin arch: cleanup and standardize anomaly.h file format -- no functional changes 

Signed-off-by: default avatarMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@analog.com>
parent c6c4d7bb
Hide whitespace changes
Inline Side-by-side
Showing with 174 additions and 266 deletions
include/asm-blackfin/mach-bf533/anomaly.h
View file @ 287050fe
/*
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Based on:
* Author:
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Copyright (C) 2004-2007 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
......@@ -43,44 +21,44 @@
#endif
/* Issues that are common to 0.5, 0.4, and 0.3 silicon */
#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
|| defined(CONFIG_BF_REV_0_3))
#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
slot1 and store of a P register in slot 2 is not
supported */
* slot1 and store of a P register in slot 2 is not
* supported */
#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
every corresponding match */
* every corresponding match */
#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
Channel DMA stops */
* Channel DMA stops */
#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
registers. */
* registers. */
#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
upper bits*/
* upper bits*/
#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
syncs */
* syncs */
#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
functional */
* functional */
#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
state */
* state */
#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
#define ANOMALY_05000272 /* Certain data cache write through modes fail for
VDDint <=0.9V */
* VDDint <=0.9V */
#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
an edge is detected may clear interrupt */
* an edge is detected may clear interrupt */
#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
DMA system instability */
* DMA system instability */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
not restored */
* not restored */
#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
control */
* control */
#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
killed in a particular stage*/
* killed in a particular stage*/
#define ANOMALY_05000311 /* Erroneous flag pin operations under specific
sequences */
* sequences */
#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
registers are interrupted */
* registers are interrupted */
#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */
#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
* Next System MMR Access */
......@@ -91,90 +69,90 @@
/* These issues only occur on 0.3 or 0.4 BF533 */
#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
updated at the same time. */
* updated at the same time. */
#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
Cache Fill can be corrupted after or during
Instruction DMA if certain core stalls exist */
* Cache Fill can be corrupted after or during
* Instruction DMA if certain core stalls exist */
#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
Purpose TX or RX modes */
* Purpose TX or RX modes */
#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
preceding memory read */
* preceding memory read */
#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
inactive channels in certain conditions */
* inactive channels in certain conditions */
#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
situation */
* situation */
#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
data*/
* data*/
#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
Differences in certain Conditions */
* Differences in certain Conditions */
#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
hardware reset */
* hardware reset */
#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
IDLE around a Change of Control causes
unpredictable results */
* IDLE around a Change of Control causes
* unpredictable results */
#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
shadow of a conditional branch */
* shadow of a conditional branch */
#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
errors */
* errors */
#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
interrupt not functional */
* interrupt not functional */
#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
loops may cause the instruction fetch unit to
malfunction */
* loops may cause the instruction fetch unit to
* malfunction */
#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
the ICPLB Data registers differ */
* the ICPLB Data registers differ */
#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
#define ANOMALY_05000262 /* Stores to data cache may be lost */
#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
instruction will cause an infinite stall in the
second to last instruction in a hardware loop */
* instruction will cause an infinite stall in the
* second to last instruction in a hardware loop */
#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
SPORT external receive and transmit clocks. */
* SPORT external receive and transmit clocks. */
#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
internal voltage regulator (VDDint) to increase. */
* internal voltage regulator (VDDint) to increase. */
#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
internal voltage regulator (VDDint) to decrease */
* internal voltage regulator (VDDint) to decrease */
#endif /* issues only occur on 0.3 or 0.4 BF533 */
/* These issues are only on 0.4 silicon */
#if (defined(CONFIG_BF_REV_0_4))
#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
(TDM) */
* (TDM) */
#endif /* issues are only on 0.4 silicon */
/* These issues are only on 0.3 silicon */
#if defined(CONFIG_BF_REV_0_3)
#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
External Frame Syncs */
* External Frame Syncs */
#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
Instruction or Data Fetches, or by Fetches at the
boundary of reserved memory space */
* Instruction or Data Fetches, or by Fetches at the
* boundary of reserved memory space */
#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
when polarity setting is changed */
* when polarity setting is changed */
#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
corruption */
* corruption */
#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
fix */
* fix */
#define ANOMALY_05000201 /* Receive frame sync not ignored during active
frames in sport MCM */
* frames in sport MCM */
#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
stopping */
* stopping */
#if defined(CONFIG_BF533)
#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
allocate cache lines on reads only mode */
* allocate cache lines on reads only mode */
#endif /* CONFIG_BF533 */
#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
instructions */
* instructions */
#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
Sync Transmit Mode */
* Sync Transmit Mode */
#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
#endif /* only on 0.3 silicon */
......
include/asm-blackfin/mach-bf537/anomaly.h
View file @ 287050fe
/*
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Copyright (C) 2004-2007 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
......@@ -46,37 +22,37 @@
#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
slot1 and store of a P register in slot 2 is not
supported */
* slot1 and store of a P register in slot 2 is not
* supported */
#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
Channel DMA stops */
* Channel DMA stops */
#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
registers. */
* registers. */
#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
upper bits*/
* upper bits*/
#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
syncs */
* syncs */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
Changed */
* Changed */
#endif
#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
SPORT external receive and transmit clocks. */
* SPORT external receive and transmit clocks. */
#define ANOMALY_05000272 /* Certain data cache write through modes fail for
VDDint <=0.9V */
* VDDint <=0.9V */
#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
an edge is detected may clear interrupt */
* an edge is detected may clear interrupt */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
not restored */
* not restored */
#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
control */
* control */
#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
killed in a particular stage*/
* killed in a particular stage*/
#define ANOMALY_05000310 /* False hardware errors caused by fetches at the
* boundary of reserved memory */
#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
registers are interrupted */
* registers are interrupted */
#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
* received properly */
......@@ -84,41 +60,41 @@
#if defined(CONFIG_BF_REV_0_2)
#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
IDLE around a Change of Control causes
unpredictable results */
* IDLE around a Change of Control causes
* unpredictable results */
#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
(TDM) */
* (TDM) */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
#endif
#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
interrupt not functional */
* interrupt not functional */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
#endif
#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
loops may cause the instruction fetch unit to
malfunction */
* loops may cause the instruction fetch unit to
* malfunction */
#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
the ICPLB Data registers differ */
* the ICPLB Data registers differ */
#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
#define ANOMALY_05000262 /* Stores to data cache may be lost */
#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
instruction will cause an infinite stall in the
second to last instruction in a hardware loop */
* instruction will cause an infinite stall in the
* second to last instruction in a hardware loop */
#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
and non-zero DEB_TRAFFIC_PERIOD value */
* and non-zero DEB_TRAFFIC_PERIOD value */
#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
internal voltage regulator (VDDint) to decrease */
* internal voltage regulator (VDDint) to decrease */
#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
an edge is detected may clear interrupt */
* an edge is detected may clear interrupt */
#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
DMA system instability */
* DMA system instability */
#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
Atmel Dataflash devices */
* Atmel Dataflash devices */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
* is not restored */
#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
......@@ -134,6 +110,6 @@
* mode */
#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
* status No Carrier */
#endif /* CONFIG_BF_REV_0_2 */
#endif /* CONFIG_BF_REV_0_2 */
#endif /* _MACH_ANOMALY_H_ */
include/asm-blackfin/mach-bf548/anomaly.h
View file @ 287050fe
/*
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Copyright (C) 2004-2007 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
slot1 and store of a P register in slot 2 is not
supported */
* slot1 and store of a P register in slot 2 is not
* supported */
#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
Channel DMA stops */
* Channel DMA stops */
#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
registers. */
* registers. */
#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
Shadow of a Conditional Branch */
* Shadow of a Conditional Branch */
#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
interrupt not functional */
* interrupt not functional */
#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
SPORT external receive and transmit clocks. */
* SPORT external receive and transmit clocks. */
#define ANOMALY_05000272 /* Certain data cache write through modes fail for
VDDint <=0.9V */
* VDDint <=0.9V */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
not restored */
* not restored */
#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
Boundary of Reserved Memory */
* Boundary of Reserved Memory */
#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
LC Registers Are Interrupted */
* LC Registers Are Interrupted */
#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
the USB FIFO Simultaneously */
* the USB FIFO Simultaneously */
#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
function */
* function */
#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
*/
* */
#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
Skew */
* Skew */
#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
of Host DMA Port */
* of Host DMA Port */
#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
Allowed Configuration on Host DMA Port */
* Allowed Configuration on Host DMA Port */
#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
#endif /* _MACH_ANOMALY_H_ */
include/asm-blackfin/mach-bf561/anomaly.h
View file @ 287050fe
/*
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Copyright (C) 2004-2007 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
* - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
* - Revision L, Aug 10, 2006; ADSP-BF561 Silicon Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
......@@ -42,142 +19,142 @@
#endif
/* Issues that are common to 0.5 and 0.3 silicon */
#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
slot1 and store of a P register in slot 2 is not
supported */
* slot1 and store of a P register in slot 2 is not
* supported */
#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
updated at the same time. */
* updated at the same time. */
#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
memory locations */
* memory locations */
#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
registers */
* registers */
#define ANOMALY_05000127 /* Signbits instruction not functional under certain
conditions */
* conditions */
#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
upper bits */
* upper bits */
#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
syncs */
* syncs */
#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
and higher devices */
* and higher devices */
#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
functional */
* functional */
#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
shadow of a conditional branch */
* shadow of a conditional branch */
#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
may cause bad instruction fetches */
* may cause bad instruction fetches */
#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
external SPORT TX and RX clocks */
* external SPORT TX and RX clocks */
#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
voltage regulator (VDDint) to increase */
* voltage regulator (VDDint) to increase */
#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
voltage regulator (VDDint) to decrease */
* voltage regulator (VDDint) to decrease */
#define ANOMALY_05000272 /* Certain data cache write through modes fail for
VDDint <=0.9V */
* VDDint <=0.9V */
#define ANOMALY_05000274 /* Data cache write back to external synchronous memory
may be lost */
* may be lost */
#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
registers are interrupted */
* registers are interrupted */
#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
#if (defined(CONFIG_BF_REV_0_5))
#if (defined(CONFIG_BF_REV_0_5))
#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
mode with external clock */
* mode with external clock */
#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
using IMDMA */
* using IMDMA */
#endif
#if (defined(CONFIG_BF_REV_0_3))
#if (defined(CONFIG_BF_REV_0_3))
#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
Mode with 0 Frame Syncs */
* Mode with 0 Frame Syncs */
#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
cache data writes */
* cache data writes */
#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
accumulator saturation */
* accumulator saturation */
#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
Purpose TX or RX modes */
* Purpose TX or RX modes */
#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
registers */
* registers */
#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
External Frame Syncs */
* External Frame Syncs */
#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
(not a meaningful mode) */
* (not a meaningful mode) */
#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
Placement in Memory */
* Placement in Memory */
#define ANOMALY_05000189 /* False Protection Exception */
#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
when polarity setting is changed */
* when polarity setting is changed */
#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
corruption */
* corruption */
#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
memory read */
* memory read */
#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
fix */
* fix */
#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
inactive channels in certain conditions */
* inactive channels in certain conditions */
#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
situation */
* situation */
#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
allocate cache lines on reads only mode */
* allocate cache lines on reads only mode */
#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
stopping */
* stopping */
#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
instructions */
* instructions */
#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
state */
* state */
#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
Non-Cached On-Chip L2 Memory */
* Non-Cached On-Chip L2 Memory */
#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
data */
* data */
#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
Differences in certain Conditions */
* Differences in certain Conditions */
#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
multichannel mode */
* multichannel mode */
#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
hardware reset */
* hardware reset */
#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
Control causes failures */
* Control causes failures */
#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
(TDM) mode in certain conditions */
* (TDM) mode in certain conditions */
#define ANOMALY_05000251 /* Exception not generated for MMR accesses in
reserved region */
* reserved region */
#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
of the ICPLB Data registers differ */
* of the ICPLB Data registers differ */
#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
#define ANOMALY_05000262 /* Stores to data cache may be lost */
#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
exception */
* exception */
#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
to last instruction in hardware loop */
* to last instruction in hardware loop */
#define ANOMALY_05000276 /* Timing requirements change for External Frame
Sync PPI Modes with non-zero PPI_DELAY */
* Sync PPI Modes with non-zero PPI_DELAY */
#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
DMA system instability */
* DMA system instability */
#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
not restored */
* not restored */
#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
in a particular stage */
* in a particular stage */
#define ANOMALY_05000287 /* A read will receive incorrect data under certain
conditions */
* conditions */
#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7