backlight: lm3630: apply chip revision

The LM3630 chip was revised by TI and chip name was also changed to
LM3630A.  And register map, default values and initial sequences are
changed.  The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You
can find more information about LM3630A(datasheet, evm etc) at
http://www.ti.com/product/lm3630aSigned-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/Kconfig

@@ -368,12 +368,12 @@ config BACKLIGHT_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  backlight driver.
 
-config BACKLIGHT_LM3630
-	tristate "Backlight Driver for LM3630"
+config BACKLIGHT_LM3630A
+	tristate "Backlight Driver for LM3630A"
 	depends on BACKLIGHT_CLASS_DEVICE && I2C
 	select REGMAP_I2C
 	help
-	  This supports TI LM3630 Backlight Driver
+	  This supports TI LM3630A Backlight Driver
 
 config BACKLIGHT_LM3639
 	tristate "Backlight Driver for LM3639"

drivers/video/backlight/Makefile

@@ -37,7 +37,7 @@ obj-$(CONFIG_BACKLIGHT_GPIO)		+= gpio_backlight.o
 obj-$(CONFIG_BACKLIGHT_HP680)		+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_HP700)		+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
-obj-$(CONFIG_BACKLIGHT_LM3630)		+= lm3630_bl.o
+obj-$(CONFIG_BACKLIGHT_LM3630A)		+= lm3630a_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)		+= locomolcd.o
 obj-$(CONFIG_BACKLIGHT_LP855X)		+= lp855x_bl.o

include/linux/platform_data/lm3630_bl.h

-/*
-* Simple driver for Texas Instruments LM3630 LED Flash driver chip
-* Copyright (C) 2012 Texas Instruments
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*
-*/
-
-#ifndef __LINUX_LM3630_H
-#define __LINUX_LM3630_H
-
-#define LM3630_NAME "lm3630_bl"
-
-enum lm3630_pwm_ctrl {
-	PWM_CTRL_DISABLE = 0,
-	PWM_CTRL_BANK_A,
-	PWM_CTRL_BANK_B,
-	PWM_CTRL_BANK_ALL,
-};
-
-enum lm3630_pwm_active {
-	PWM_ACTIVE_HIGH = 0,
-	PWM_ACTIVE_LOW,
-};
-
-enum lm3630_bank_a_ctrl {
-	BANK_A_CTRL_DISABLE = 0x0,
-	BANK_A_CTRL_LED1 = 0x4,
-	BANK_A_CTRL_LED2 = 0x1,
-	BANK_A_CTRL_ALL = 0x5,
-};
-
-enum lm3630_bank_b_ctrl {
-	BANK_B_CTRL_DISABLE = 0,
-	BANK_B_CTRL_LED2,
-};
-
-struct lm3630_platform_data {
-
-	/* maximum brightness */
-	int max_brt_led1;
-	int max_brt_led2;
-
-	/* initial on brightness */
-	int init_brt_led1;
-	int init_brt_led2;
-	enum lm3630_pwm_ctrl pwm_ctrl;
-	enum lm3630_pwm_active pwm_active;
-	enum lm3630_bank_a_ctrl bank_a_ctrl;
-	enum lm3630_bank_b_ctrl bank_b_ctrl;
-	unsigned int pwm_period;
-	void (*pwm_set_intensity) (int brightness, int max_brightness);
-};
-
-#endif /* __LINUX_LM3630_H */

include/linux/platform_data/lm3630a_bl.h

+/*
+* Simple driver for Texas Instruments LM3630A LED Flash driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+*/
+
+#ifndef __LINUX_LM3630A_H
+#define __LINUX_LM3630A_H
+
+#define LM3630A_NAME "lm3630a_bl"
+
+enum lm3630a_pwm_ctrl {
+	LM3630A_PWM_DISABLE = 0x00,
+	LM3630A_PWM_BANK_A,
+	LM3630A_PWM_BANK_B,
+	LM3630A_PWM_BANK_ALL,
+	LM3630A_PWM_BANK_A_ACT_LOW = 0x05,
+	LM3630A_PWM_BANK_B_ACT_LOW,
+	LM3630A_PWM_BANK_ALL_ACT_LOW,
+};
+
+enum lm3630a_leda_ctrl {
+	LM3630A_LEDA_DISABLE = 0x00,
+	LM3630A_LEDA_ENABLE = 0x04,
+	LM3630A_LEDA_ENABLE_LINEAR = 0x14,
+};
+
+enum lm3630a_ledb_ctrl {
+	LM3630A_LEDB_DISABLE = 0x00,
+	LM3630A_LEDB_ON_A = 0x01,
+	LM3630A_LEDB_ENABLE = 0x02,
+	LM3630A_LEDB_ENABLE_LINEAR = 0x0A,
+};
+
+#define LM3630A_MAX_BRIGHTNESS 255
+/*
+ *@leda_init_brt : led a init brightness. 4~255
+ *@leda_max_brt  : led a max brightness.  4~255
+ *@leda_ctrl     : led a disable, enable linear, enable exponential
+ *@ledb_init_brt : led b init brightness. 4~255
+ *@ledb_max_brt  : led b max brightness.  4~255
+ *@ledb_ctrl     : led b disable, enable linear, enable exponential
+ *@pwm_period    : pwm period
+ *@pwm_ctrl      : pwm disable, bank a or b, active high or low
+ */
+struct lm3630a_platform_data {
+
+	/* led a config.  */
+	int leda_init_brt;
+	int leda_max_brt;
+	enum lm3630a_leda_ctrl leda_ctrl;
+	/* led b config. */
+	int ledb_init_brt;
+	int ledb_max_brt;
+	enum lm3630a_ledb_ctrl ledb_ctrl;
+	/* pwm config. */
+	unsigned int pwm_period;
+	enum lm3630a_pwm_ctrl pwm_ctrl;
+};
+
+#endif /* __LINUX_LM3630A_H */