xsysace: Remove SYSACE driver

Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze
systems. The driver is not regularly tested and very likely not working for
quite a long time that's why remove it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

MAINTAINERS

@@ -2717,7 +2717,6 @@ F:	Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
 F:	Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
 F:	Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
 F:	arch/arm/mach-zynq/
-F:	drivers/block/xsysace.c
 F:	drivers/clocksource/timer-cadence-ttc.c
 F:	drivers/cpuidle/cpuidle-zynq.c
 F:	drivers/edac/synopsys_edac.c

arch/microblaze/boot/dts/system.dts

@@ -310,14 +310,6 @@ RS232_Uart_1: serial@84000000 {
 			xlnx,odd-parity = <0x0>;
 			xlnx,use-parity = <0x0>;
 		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
 		debug_module: debug@84400000 {
 			compatible = "xlnx,mdm-1.00.d";
 			reg = < 0x84400000 0x10000 >;

arch/powerpc/boot/dts/icon.dts

@@ -197,13 +197,6 @@ partition@fa0000 {
 						reg = <0x00fa0000 0x00060000>;
 					};
 				};
-
-				SysACE_CompactFlash: sysace@1,0 {
-					compatible = "xlnx,sysace";
-					interrupt-parent = <&UIC2>;
-					interrupts = <24 0x4>;
-					reg = <0x00000001 0x00000000 0x10000>;
-				};
 			};
 
 			UART0: serial@f0000200 {

arch/powerpc/configs/44x/icon_defconfig

@@ -28,7 +28,6 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_XILINX_SYSACE=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y

drivers/block/Kconfig

@@ -378,12 +378,6 @@ config SUNVDC
 
 source "drivers/s390/block/Kconfig"
 
-config XILINX_SYSACE
-	tristate "Xilinx SystemACE support"
-	depends on 4xx || MICROBLAZE
-	help
-	  Include support for the Xilinx SystemACE CompactFlash interface
-
 config XEN_BLKDEV_FRONTEND
 	tristate "Xen virtual block device support"
 	depends on XEN

drivers/block/Makefile

@@ -20,7 +20,6 @@ obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_N64CART)		+= n64cart.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= brd.o
 obj-$(CONFIG_BLK_DEV_LOOP)	+= loop.o
-obj-$(CONFIG_XILINX_SYSACE)	+= xsysace.o
 obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
 obj-$(CONFIG_SUNVDC)		+= sunvdc.o