Commit 291ab06e authored by Stefan Wahren's avatar Stefan Wahren Committed by David S. Miller

net: qualcomm: new Ethernet over SPI driver for QCA7000

This patch adds the Ethernet over SPI driver for the
Qualcomm QCA7000 HomePlug GreenPHY.
Signed-off-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7d50df8f
...@@ -150,6 +150,7 @@ config ETHOC ...@@ -150,6 +150,7 @@ config ETHOC
source "drivers/net/ethernet/packetengines/Kconfig" source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/qualcomm/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig" source "drivers/net/ethernet/rdc/Kconfig"
......
...@@ -60,6 +60,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o ...@@ -60,6 +60,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
......
#
# Qualcomm network device configuration
#
config NET_VENDOR_QUALCOMM
bool "Qualcomm devices"
default y
depends on SPI_MASTER && OF_GPIO
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Qualcomm cards. If you say Y, you will be asked
for your specific card in the following questions.
if NET_VENDOR_QUALCOMM
config QCA7000
tristate "Qualcomm Atheros QCA7000 support"
depends on SPI_MASTER && OF_GPIO
---help---
This SPI protocol driver supports the Qualcomm Atheros QCA7000.
To compile this driver as a module, choose M here. The module
will be called qcaspi.
endif # NET_VENDOR_QUALCOMM
#
# Makefile for the Qualcomm network device drivers.
#
obj-$(CONFIG_QCA7000) += qcaspi.o
qcaspi-objs := qca_spi.o qca_framing.o qca_7k.o qca_debug.o
/*
*
* Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
/* This module implements the Qualcomm Atheros SPI protocol for
* kernel-based SPI device.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spi/spi.h>
#include <linux/version.h>
#include "qca_7k.h"
void
qcaspi_spi_error(struct qcaspi *qca)
{
if (qca->sync != QCASPI_SYNC_READY)
return;
netdev_err(qca->net_dev, "spi error\n");
qca->sync = QCASPI_SYNC_UNKNOWN;
qca->stats.spi_err++;
}
int
qcaspi_read_register(struct qcaspi *qca, u16 reg, u16 *result)
{
__be16 rx_data;
__be16 tx_data;
struct spi_transfer *transfer;
struct spi_message *msg;
int ret;
tx_data = cpu_to_be16(QCA7K_SPI_READ | QCA7K_SPI_INTERNAL | reg);
if (qca->legacy_mode) {
msg = &qca->spi_msg1;
transfer = &qca->spi_xfer1;
transfer->tx_buf = &tx_data;
transfer->rx_buf = NULL;
transfer->len = QCASPI_CMD_LEN;
spi_sync(qca->spi_dev, msg);
} else {
msg = &qca->spi_msg2;
transfer = &qca->spi_xfer2[0];
transfer->tx_buf = &tx_data;
transfer->rx_buf = NULL;
transfer->len = QCASPI_CMD_LEN;
transfer = &qca->spi_xfer2[1];
}
transfer->tx_buf = NULL;
transfer->rx_buf = &rx_data;
transfer->len = QCASPI_CMD_LEN;
ret = spi_sync(qca->spi_dev, msg);
if (!ret)
ret = msg->status;
if (ret)
qcaspi_spi_error(qca);
else
*result = be16_to_cpu(rx_data);
return ret;
}
int
qcaspi_write_register(struct qcaspi *qca, u16 reg, u16 value)
{
__be16 tx_data[2];
struct spi_transfer *transfer;
struct spi_message *msg;
int ret;
tx_data[0] = cpu_to_be16(QCA7K_SPI_WRITE | QCA7K_SPI_INTERNAL | reg);
tx_data[1] = cpu_to_be16(value);
if (qca->legacy_mode) {
msg = &qca->spi_msg1;
transfer = &qca->spi_xfer1;
transfer->tx_buf = &tx_data[0];
transfer->rx_buf = NULL;
transfer->len = QCASPI_CMD_LEN;
spi_sync(qca->spi_dev, msg);
} else {
msg = &qca->spi_msg2;
transfer = &qca->spi_xfer2[0];
transfer->tx_buf = &tx_data[0];
transfer->rx_buf = NULL;
transfer->len = QCASPI_CMD_LEN;
transfer = &qca->spi_xfer2[1];
}
transfer->tx_buf = &tx_data[1];
transfer->rx_buf = NULL;
transfer->len = QCASPI_CMD_LEN;
ret = spi_sync(qca->spi_dev, msg);
if (!ret)
ret = msg->status;
if (ret)
qcaspi_spi_error(qca);
return ret;
}
int
qcaspi_tx_cmd(struct qcaspi *qca, u16 cmd)
{
__be16 tx_data;
struct spi_message *msg = &qca->spi_msg1;
struct spi_transfer *transfer = &qca->spi_xfer1;
int ret;
tx_data = cpu_to_be16(cmd);
transfer->len = sizeof(tx_data);
transfer->tx_buf = &tx_data;
transfer->rx_buf = NULL;
ret = spi_sync(qca->spi_dev, msg);
if (!ret)
ret = msg->status;
if (ret)
qcaspi_spi_error(qca);
return ret;
}
/*
* Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
/* Qualcomm Atheros SPI register definition.
*
* This module is designed to define the Qualcomm Atheros SPI
* register placeholders.
*/
#ifndef _QCA_7K_H
#define _QCA_7K_H
#include <linux/types.h>
#include "qca_spi.h"
#define QCA7K_SPI_READ (1 << 15)
#define QCA7K_SPI_WRITE (0 << 15)
#define QCA7K_SPI_INTERNAL (1 << 14)
#define QCA7K_SPI_EXTERNAL (0 << 14)
#define QCASPI_CMD_LEN 2
#define QCASPI_HW_PKT_LEN 4
#define QCASPI_HW_BUF_LEN 0xC5B
/* SPI registers; */
#define SPI_REG_BFR_SIZE 0x0100
#define SPI_REG_WRBUF_SPC_AVA 0x0200
#define SPI_REG_RDBUF_BYTE_AVA 0x0300
#define SPI_REG_SPI_CONFIG 0x0400
#define SPI_REG_SPI_STATUS 0x0500
#define SPI_REG_INTR_CAUSE 0x0C00
#define SPI_REG_INTR_ENABLE 0x0D00
#define SPI_REG_RDBUF_WATERMARK 0x1200
#define SPI_REG_WRBUF_WATERMARK 0x1300
#define SPI_REG_SIGNATURE 0x1A00
#define SPI_REG_ACTION_CTRL 0x1B00
/* SPI_CONFIG register definition; */
#define QCASPI_SLAVE_RESET_BIT (1 << 6)
/* INTR_CAUSE/ENABLE register definition. */
#define SPI_INT_WRBUF_BELOW_WM (1 << 10)
#define SPI_INT_CPU_ON (1 << 6)
#define SPI_INT_ADDR_ERR (1 << 3)
#define SPI_INT_WRBUF_ERR (1 << 2)
#define SPI_INT_RDBUF_ERR (1 << 1)
#define SPI_INT_PKT_AVLBL (1 << 0)
void qcaspi_spi_error(struct qcaspi *qca);
int qcaspi_read_register(struct qcaspi *qca, u16 reg, u16 *result);
int qcaspi_write_register(struct qcaspi *qca, u16 reg, u16 value);
int qcaspi_tx_cmd(struct qcaspi *qca, u16 cmd);
#endif /* _QCA_7K_H */
/*
* Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* This file contains debugging routines for use in the QCA7K driver.
*/
#include <linux/debugfs.h>
#include <linux/ethtool.h>
#include <linux/seq_file.h>
#include <linux/types.h>
#include "qca_7k.h"
#include "qca_debug.h"
#define QCASPI_MAX_REGS 0x20
static const u16 qcaspi_spi_regs[] = {
SPI_REG_BFR_SIZE,
SPI_REG_WRBUF_SPC_AVA,
SPI_REG_RDBUF_BYTE_AVA,
SPI_REG_SPI_CONFIG,
SPI_REG_SPI_STATUS,
SPI_REG_INTR_CAUSE,
SPI_REG_INTR_ENABLE,
SPI_REG_RDBUF_WATERMARK,
SPI_REG_WRBUF_WATERMARK,
SPI_REG_SIGNATURE,
SPI_REG_ACTION_CTRL
};
/* The order of these strings must match the order of the fields in
* struct qcaspi_stats
* See qca_spi.h
*/
static const char qcaspi_gstrings_stats[][ETH_GSTRING_LEN] = {
"Triggered resets",
"Device resets",
"Reset timeouts",
"Read errors",
"Write errors",
"Read buffer errors",
"Write buffer errors",
"Out of memory",
"Write buffer misses",
"Transmit ring full",
"SPI errors",
};
#ifdef CONFIG_DEBUG_FS
static int
qcaspi_info_show(struct seq_file *s, void *what)
{
struct qcaspi *qca = s->private;
seq_printf(s, "RX buffer size : %lu\n",
(unsigned long)qca->buffer_size);
seq_puts(s, "TX ring state : ");
if (qca->txr.skb[qca->txr.head] == NULL)
seq_puts(s, "empty");
else if (qca->txr.skb[qca->txr.tail])
seq_puts(s, "full");
else
seq_puts(s, "in use");
seq_puts(s, "\n");
seq_printf(s, "TX ring size : %u\n",
qca->txr.size);
seq_printf(s, "Sync state : %u (",
(unsigned int)qca->sync);
switch (qca->sync) {
case QCASPI_SYNC_UNKNOWN:
seq_puts(s, "QCASPI_SYNC_UNKNOWN");
break;
case QCASPI_SYNC_RESET:
seq_puts(s, "QCASPI_SYNC_RESET");
break;
case QCASPI_SYNC_READY:
seq_puts(s, "QCASPI_SYNC_READY");
break;
default:
seq_puts(s, "INVALID");
break;
}
seq_puts(s, ")\n");
seq_printf(s, "IRQ : %d\n",
qca->spi_dev->irq);
seq_printf(s, "INTR REQ : %u\n",
qca->intr_req);
seq_printf(s, "INTR SVC : %u\n",
qca->intr_svc);
seq_printf(s, "SPI max speed : %lu\n",
(unsigned long)qca->spi_dev->max_speed_hz);
seq_printf(s, "SPI mode : %x\n",
qca->spi_dev->mode);
seq_printf(s, "SPI chip select : %u\n",
(unsigned int)qca->spi_dev->chip_select);
seq_printf(s, "SPI legacy mode : %u\n",
(unsigned int)qca->legacy_mode);
seq_printf(s, "SPI burst length : %u\n",
(unsigned int)qca->burst_len);
return 0;
}
static int
qcaspi_info_open(struct inode *inode, struct file *file)
{
return single_open(file, qcaspi_info_show, inode->i_private);
}
static const struct file_operations qcaspi_info_ops = {
.open = qcaspi_info_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
void
qcaspi_init_device_debugfs(struct qcaspi *qca)
{
struct dentry *device_root;
device_root = debugfs_create_dir(dev_name(&qca->net_dev->dev), NULL);
qca->device_root = device_root;
if (IS_ERR(device_root) || !device_root) {
pr_warn("failed to create debugfs directory for %s\n",
dev_name(&qca->net_dev->dev));
return;
}
debugfs_create_file("info", S_IFREG | S_IRUGO, device_root, qca,
&qcaspi_info_ops);
}
void
qcaspi_remove_device_debugfs(struct qcaspi *qca)
{
debugfs_remove_recursive(qca->device_root);
}
#else /* CONFIG_DEBUG_FS */
void
qcaspi_init_device_debugfs(struct qcaspi *qca)
{
}
void
qcaspi_remove_device_debugfs(struct qcaspi *qca)
{
}
#endif
static void
qcaspi_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *p)
{
struct qcaspi *qca = netdev_priv(dev);
strlcpy(p->driver, QCASPI_DRV_NAME, sizeof(p->driver));
strlcpy(p->version, QCASPI_DRV_VERSION, sizeof(p->version));
strlcpy(p->fw_version, "QCA7000", sizeof(p->fw_version));
strlcpy(p->bus_info, dev_name(&qca->spi_dev->dev),
sizeof(p->bus_info));
}
static int
qcaspi_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
cmd->transceiver = XCVR_INTERNAL;
cmd->supported = SUPPORTED_10baseT_Half;
ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_HALF;
cmd->port = PORT_OTHER;
cmd->autoneg = AUTONEG_DISABLE;
return 0;
}
static void
qcaspi_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *estats, u64 *data)
{
struct qcaspi *qca = netdev_priv(dev);
struct qcaspi_stats *st = &qca->stats;
memcpy(data, st, ARRAY_SIZE(qcaspi_gstrings_stats) * sizeof(u64));
}
static void
qcaspi_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
{
switch (stringset) {
case ETH_SS_STATS:
memcpy(buf, &qcaspi_gstrings_stats,
sizeof(qcaspi_gstrings_stats));
break;
default:
WARN_ON(1);
break;
}
}
static int
qcaspi_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return ARRAY_SIZE(qcaspi_gstrings_stats);
default:
return -EINVAL;
}
}
static int
qcaspi_get_regs_len(struct net_device *dev)
{
return sizeof(u32) * QCASPI_MAX_REGS;
}
static void
qcaspi_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
struct qcaspi *qca = netdev_priv(dev);
u32 *regs_buff = p;
unsigned int i;
regs->version = 1;
memset(regs_buff, 0, sizeof(u32) * QCASPI_MAX_REGS);
for (i = 0; i < ARRAY_SIZE(qcaspi_spi_regs); i++) {
u16 offset, value;
qcaspi_read_register(qca, qcaspi_spi_regs[i], &value);
offset = qcaspi_spi_regs[i] >> 8;
regs_buff[offset] = value;
}
}
static void
qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
{
struct qcaspi *qca = netdev_priv(dev);
ring->rx_max_pending = 4;
ring->tx_max_pending = TX_RING_MAX_LEN;
ring->rx_pending = 4;
ring->tx_pending = qca->txr.count;
}
static int
qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
{
struct qcaspi *qca = netdev_priv(dev);
if ((ring->rx_pending) ||
(ring->rx_mini_pending) ||
(ring->rx_jumbo_pending))
return -EINVAL;
if (netif_running(dev))
qcaspi_netdev_close(dev);
qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN);
qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN);
if (netif_running(dev))
qcaspi_netdev_open(dev);
return 0;
}
static const struct ethtool_ops qcaspi_ethtool_ops = {
.get_drvinfo = qcaspi_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_settings = qcaspi_get_settings,
.get_ethtool_stats = qcaspi_get_ethtool_stats,
.get_strings = qcaspi_get_strings,
.get_sset_count = qcaspi_get_sset_count,
.get_regs_len = qcaspi_get_regs_len,
.get_regs = qcaspi_get_regs,
.get_ringparam = qcaspi_get_ringparam,
.set_ringparam = qcaspi_set_ringparam,
};
void qcaspi_set_ethtool_ops(struct net_device *dev)
{
dev->ethtool_ops = &qcaspi_ethtool_ops;
}
/*
* Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* This file contains debugging routines for use in the QCA7K driver.
*/
#ifndef _QCA_DEBUG_H
#define _QCA_DEBUG_H
#include "qca_spi.h"
void qcaspi_init_device_debugfs(struct qcaspi *qca);
void qcaspi_remove_device_debugfs(struct qcaspi *qca);
void qcaspi_set_ethtool_ops(struct net_device *dev);
#endif /* _QCA_DEBUG_H */
/*
* Copyright (c) 2011, 2012, Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* Atheros ethernet framing. Every Ethernet frame is surrounded
* by an atheros frame while transmitted over a serial channel;
*/
#include <linux/kernel.h>
#include "qca_framing.h"
u16
qcafrm_create_header(u8 *buf, u16 length)
{
__le16 len;
if (!buf)
return 0;
len = cpu_to_le16(length);
buf[0] = 0xAA;
buf[1] = 0xAA;
buf[2] = 0xAA;
buf[3] = 0xAA;
buf[4] = len & 0xff;
buf[5] = (len >> 8) & 0xff;
buf[6] = 0;
buf[7] = 0;
return QCAFRM_HEADER_LEN;
}
u16
qcafrm_create_footer(u8 *buf)
{
if (!buf)
return 0;
buf[0] = 0x55;
buf[1] = 0x55;
return QCAFRM_FOOTER_LEN;
}
/* Gather received bytes and try to extract a full ethernet frame by
* following a simple state machine.
*
* Return: QCAFRM_GATHER No ethernet frame fully received yet.
* QCAFRM_NOHEAD Header expected but not found.
* QCAFRM_INVLEN Atheros frame length is invalid
* QCAFRM_NOTAIL Footer expected but not found.
* > 0 Number of byte in the fully received
* Ethernet frame
*/
s32
qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_byte)
{
s32 ret = QCAFRM_GATHER;
u16 len;
switch (handle->state) {
case QCAFRM_HW_LEN0:
case QCAFRM_HW_LEN1:
/* by default, just go to next state */
handle->state--;
if (recv_byte != 0x00) {
/* first two bytes of length must be 0 */
handle->state = QCAFRM_HW_LEN0;
}
break;
case QCAFRM_HW_LEN2:
case QCAFRM_HW_LEN3:
handle->state--;
break;
/* 4 bytes header pattern */
case QCAFRM_WAIT_AA1:
case QCAFRM_WAIT_AA2:
case QCAFRM_WAIT_AA3:
case QCAFRM_WAIT_AA4:
if (recv_byte != 0xAA) {
ret = QCAFRM_NOHEAD;
handle->state = QCAFRM_HW_LEN0;
} else {
handle->state--;
}
break;
/* 2 bytes length. */
/* Borrow offset field to hold length for now. */
case QCAFRM_WAIT_LEN_BYTE0:
handle->offset = recv_byte;
handle->state = QCAFRM_WAIT_LEN_BYTE1;
break;
case QCAFRM_WAIT_LEN_BYTE1:
handle->offset = handle->offset | (recv_byte << 8);
handle->state = QCAFRM_WAIT_RSVD_BYTE1;
break;
case QCAFRM_WAIT_RSVD_BYTE1:
handle->state = QCAFRM_WAIT_RSVD_BYTE2;
break;
case QCAFRM_WAIT_RSVD_BYTE2:
len = handle->offset;
if (len > buf_len || len < QCAFRM_ETHMINLEN) {
ret = QCAFRM_INVLEN;
handle->state = QCAFRM_HW_LEN0;
} else {
handle->state = (enum qcafrm_state)(len + 1);
/* Remaining number of bytes. */
handle->offset = 0;
}
break;
default:
/* Receiving Ethernet frame itself. */
buf[handle->offset] = recv_byte;
handle->offset++;
handle->state--;
break;
case QCAFRM_WAIT_551:
if (recv_byte != 0x55) {
ret = QCAFRM_NOTAIL;
handle->state = QCAFRM_HW_LEN0;
} else {
handle->state = QCAFRM_WAIT_552;
}
break;
case QCAFRM_WAIT_552:
if (recv_byte != 0x55) {
ret = QCAFRM_NOTAIL;
handle->state = QCAFRM_HW_LEN0;
} else {
ret = handle->offset;
/* Frame is fully received. */
handle->state = QCAFRM_HW_LEN0;
}
break;
}
return ret;
}
/*
* Copyright (c) 2011, 2012, Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* Atheros Ethernet framing. Every Ethernet frame is surrounded by an atheros
* frame while transmitted over a serial channel.
*/
#ifndef _QCA_FRAMING_H
#define _QCA_FRAMING_H
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/types.h>
/* Frame is currently being received */
#define QCAFRM_GATHER 0
/* No header byte while expecting it */
#define QCAFRM_NOHEAD (QCAFRM_ERR_BASE - 1)
/* No tailer byte while expecting it */
#define QCAFRM_NOTAIL (QCAFRM_ERR_BASE - 2)
/* Frame length is invalid */
#define QCAFRM_INVLEN (QCAFRM_ERR_BASE - 3)
/* Frame length is invalid */
#define QCAFRM_INVFRAME (QCAFRM_ERR_BASE - 4)
/* Min/Max Ethernet MTU */
#define QCAFRM_ETHMINMTU 46
#define QCAFRM_ETHMAXMTU 1500
/* Min/Max frame lengths */
#define QCAFRM_ETHMINLEN (QCAFRM_ETHMINMTU + ETH_HLEN)
#define QCAFRM_ETHMAXLEN (QCAFRM_ETHMAXMTU + VLAN_ETH_HLEN)
/* QCA7K header len */
#define QCAFRM_HEADER_LEN 8
/* QCA7K footer len */
#define QCAFRM_FOOTER_LEN 2
/* QCA7K Framing. */
#define QCAFRM_ERR_BASE -1000
enum qcafrm_state {
QCAFRM_HW_LEN0 = 0x8000,
QCAFRM_HW_LEN1 = QCAFRM_HW_LEN0 - 1,
QCAFRM_HW_LEN2 = QCAFRM_HW_LEN1 - 1,
QCAFRM_HW_LEN3 = QCAFRM_HW_LEN2 - 1,
/* Waiting first 0xAA of header */
QCAFRM_WAIT_AA1 = QCAFRM_HW_LEN3 - 1,
/* Waiting second 0xAA of header */
QCAFRM_WAIT_AA2 = QCAFRM_WAIT_AA1 - 1,
/* Waiting third 0xAA of header */
QCAFRM_WAIT_AA3 = QCAFRM_WAIT_AA2 - 1,
/* Waiting fourth 0xAA of header */
QCAFRM_WAIT_AA4 = QCAFRM_WAIT_AA3 - 1,
/* Waiting Byte 0-1 of length (litte endian) */
QCAFRM_WAIT_LEN_BYTE0 = QCAFRM_WAIT_AA4 - 1,
QCAFRM_WAIT_LEN_BYTE1 = QCAFRM_WAIT_AA4 - 2,
/* Reserved bytes */
QCAFRM_WAIT_RSVD_BYTE1 = QCAFRM_WAIT_AA4 - 3,
QCAFRM_WAIT_RSVD_BYTE2 = QCAFRM_WAIT_AA4 - 4,
/* The frame length is used as the state until
* the end of the Ethernet frame
* Waiting for first 0x55 of footer
*/
QCAFRM_WAIT_551 = 1,
/* Waiting for second 0x55 of footer */
QCAFRM_WAIT_552 = QCAFRM_WAIT_551 - 1
};
/* Structure to maintain the frame decoding during reception. */
struct qcafrm_handle {
/* Current decoding state */
enum qcafrm_state state;
/* Offset in buffer (borrowed for length too) */
s16 offset;
/* Frame length as kept by this module */
u16 len;
};
u16 qcafrm_create_header(u8 *buf, u16 len);
u16 qcafrm_create_footer(u8 *buf);
static inline void qcafrm_fsm_init(struct qcafrm_handle *handle)
{
handle->state = QCAFRM_HW_LEN0;
}
/* Gather received bytes and try to extract a full Ethernet frame
* by following a simple state machine.
*
* Return: QCAFRM_GATHER No Ethernet frame fully received yet.
* QCAFRM_NOHEAD Header expected but not found.
* QCAFRM_INVLEN QCA7K frame length is invalid
* QCAFRM_NOTAIL Footer expected but not found.
* > 0 Number of byte in the fully received
* Ethernet frame
*/
s32 qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_byte);
#endif /* _QCA_FRAMING_H */
This diff is collapsed.
/*
* Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc.
* Copyright (c) 2014, I2SE GmbH
*
* Permission to use, copy, modify, and/or distribute this software
* for any purpose with or without fee is hereby granted, provided
* that the above copyright notice and this permission notice appear
* in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
* THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* Qualcomm Atheros SPI register definition.
*
* This module is designed to define the Qualcomm Atheros SPI register
* placeholders;
*/
#ifndef _QCA_SPI_H
#define _QCA_SPI_H
#include <linux/netdevice.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include "qca_framing.h"
#define QCASPI_DRV_VERSION "0.2.7-i"
#define QCASPI_DRV_NAME "qcaspi"
#define QCASPI_GOOD_SIGNATURE 0xAA55
#define TX_RING_MAX_LEN 10
#define TX_RING_MIN_LEN 2
/* sync related constants */
#define QCASPI_SYNC_UNKNOWN 0
#define QCASPI_SYNC_RESET 1
#define QCASPI_SYNC_READY 2
#define QCASPI_RESET_TIMEOUT 10
/* sync events */
#define QCASPI_EVENT_UPDATE 0
#define QCASPI_EVENT_CPUON 1
struct tx_ring {
struct sk_buff *skb[TX_RING_MAX_LEN];
u16 head;
u16 tail;
u16 size;
u16 count;
};
struct qcaspi_stats {
u64 trig_reset;
u64 device_reset;
u64 reset_timeout;
u64 read_err;
u64 write_err;
u64 read_buf_err;
u64 write_buf_err;
u64 out_of_mem;
u64 write_buf_miss;
u64 ring_full;
u64 spi_err;
};
struct qcaspi {
struct net_device *net_dev;
struct spi_device *spi_dev;
struct task_struct *spi_thread;
struct tx_ring txr;
struct qcaspi_stats stats;
struct spi_message spi_msg1;
struct spi_message spi_msg2;
struct spi_transfer spi_xfer1;
struct spi_transfer spi_xfer2[2];
u8 *rx_buffer;
u32 buffer_size;
u8 sync;
struct qcafrm_handle frm_handle;
struct sk_buff *rx_skb;
unsigned int intr_req;
unsigned int intr_svc;
#ifdef CONFIG_DEBUG_FS
struct dentry *device_root;
#endif
/* user configurable options */
u32 clkspeed;
u8 legacy_mode;
u16 burst_len;
};
int qcaspi_netdev_open(struct net_device *dev);
int qcaspi_netdev_close(struct net_device *dev);
#endif /* _QCA_SPI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment