Commit 293fdc24 authored by Gregory CLEMENT's avatar Gregory CLEMENT Committed by David S. Miller

ARM: dts: armada-xp-openblocks-ax3-4: Add BM support

Allow Openblock AX3 using hardware buffer management with mvneta.
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9dd7a57e
...@@ -67,7 +67,8 @@ soc { ...@@ -67,7 +67,8 @@ soc {
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
devbus-bootcs { devbus-bootcs {
status = "okay"; status = "okay";
...@@ -176,21 +177,29 @@ ethernet@70000 { ...@@ -176,21 +177,29 @@ ethernet@70000 {
status = "okay"; status = "okay";
phy = <&phy0>; phy = <&phy0>;
phy-mode = "sgmii"; phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <0>;
}; };
ethernet@74000 { ethernet@74000 {
status = "okay"; status = "okay";
phy = <&phy1>; phy = <&phy1>;
phy-mode = "sgmii"; phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <1>;
}; };
ethernet@30000 { ethernet@30000 {
status = "okay"; status = "okay";
phy = <&phy2>; phy = <&phy2>;
phy-mode = "sgmii"; phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
}; };
ethernet@34000 { ethernet@34000 {
status = "okay"; status = "okay";
phy = <&phy3>; phy = <&phy3>;
phy-mode = "sgmii"; phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
}; };
i2c@11000 { i2c@11000 {
status = "okay"; status = "okay";
...@@ -219,6 +228,14 @@ usb@50000 { ...@@ -219,6 +228,14 @@ usb@50000 {
usb@51000 { usb@51000 {
status = "okay"; status = "okay";
}; };
bm@c0000 {
status = "okay";
};
};
bm-bppi {
status = "okay";
}; };
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment