Commit 29885a65 authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Linus Walleij

pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller

sd_emmc_a is used a controller for the SDIO modules. This adds the pin
configuration for the SDIO controller.
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b8d74b29
...@@ -163,6 +163,13 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) }; ...@@ -163,6 +163,13 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) }; static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) }; static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
static const unsigned int sdio_d0_pins[] = { PIN(GPIOX_0, EE_OFF) };
static const unsigned int sdio_d1_pins[] = { PIN(GPIOX_1, EE_OFF) };
static const unsigned int sdio_d2_pins[] = { PIN(GPIOX_2, EE_OFF) };
static const unsigned int sdio_d3_pins[] = { PIN(GPIOX_3, EE_OFF) };
static const unsigned int sdio_cmd_pins[] = { PIN(GPIOX_4, EE_OFF) };
static const unsigned int sdio_clk_pins[] = { PIN(GPIOX_5, EE_OFF) };
static const unsigned int uart_tx_a_pins[] = { PIN(GPIOX_12, EE_OFF) }; static const unsigned int uart_tx_a_pins[] = { PIN(GPIOX_12, EE_OFF) };
static const unsigned int uart_rx_a_pins[] = { PIN(GPIOX_13, EE_OFF) }; static const unsigned int uart_rx_a_pins[] = { PIN(GPIOX_13, EE_OFF) };
static const unsigned int uart_cts_a_pins[] = { PIN(GPIOX_14, EE_OFF) }; static const unsigned int uart_cts_a_pins[] = { PIN(GPIOX_14, EE_OFF) };
...@@ -370,6 +377,12 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = { ...@@ -370,6 +377,12 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIO_TEST_N, EE_OFF), GPIO_GROUP(GPIO_TEST_N, EE_OFF),
/* Bank X */ /* Bank X */
GROUP(sdio_d0, 8, 5),
GROUP(sdio_d1, 8, 4),
GROUP(sdio_d2, 8, 3),
GROUP(sdio_d3, 8, 2),
GROUP(sdio_cmd, 8, 1),
GROUP(sdio_clk, 8, 0),
GROUP(uart_tx_a, 4, 13), GROUP(uart_tx_a, 4, 13),
GROUP(uart_rx_a, 4, 12), GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11), GROUP(uart_cts_a, 4, 11),
...@@ -507,6 +520,11 @@ static const char * const sdcard_groups[] = { ...@@ -507,6 +520,11 @@ static const char * const sdcard_groups[] = {
"sdcard_cmd", "sdcard_clk", "sdcard_cmd", "sdcard_clk",
}; };
static const char * const sdio_groups[] = {
"sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3",
"sdio_cmd", "sdio_clk",
};
static const char * const uart_a_groups[] = { static const char * const uart_a_groups[] = {
"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a", "uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
}; };
...@@ -600,6 +618,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = { ...@@ -600,6 +618,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs), FUNCTION(gpio_periphs),
FUNCTION(emmc), FUNCTION(emmc),
FUNCTION(sdcard), FUNCTION(sdcard),
FUNCTION(sdio),
FUNCTION(uart_a), FUNCTION(uart_a),
FUNCTION(uart_b), FUNCTION(uart_b),
FUNCTION(uart_c), FUNCTION(uart_c),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment