Commit 29a7d179 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux into drm-next

Pull in first set of changes from Ben for ast on ppc.

I've done a quick boot test on x86 and it still seems to boot.

* 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux:
  drm/ast: Cleanup analog init code path
  drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
  drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
  drm/ast: POST chip at probe time if VGA not enabled
  drm/ast: Try to use MMIO registers when PIO isn't supported
parents 94d12b13 37b9b81f
......@@ -379,11 +379,39 @@ static bool ast_init_dvo(struct drm_device *dev)
return true;
}
static void ast_init_analog(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u32 data;
/*
* Set DAC source to VGA mode in SCU2C via the P2A
* bridge. First configure the P2U to target the SCU
* in case it isn't at this stage.
*/
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
/* Then unlock the SCU with the magic password */
ast_write32(ast, 0x12000, 0x1688a8a8);
ast_write32(ast, 0x12000, 0x1688a8a8);
ast_write32(ast, 0x12000, 0x1688a8a8);
/* Finally, clear bits [17:16] of SCU2c */
data = ast_read32(ast, 0x1202c);
data &= 0xfffcffff;
ast_write32(ast, 0, data);
/* Disable DVO */
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x00);
}
void ast_init_3rdtx(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 jreg;
u32 data;
if (ast->chip == AST2300 || ast->chip == AST2400) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg & 0x0e) {
......@@ -399,12 +427,8 @@ void ast_init_3rdtx(struct drm_device *dev)
default:
if (ast->tx_chip_type == AST_TX_SIL164)
ast_init_dvo(dev);
else {
ast_write32(ast, 0x12000, 0x1688a8a8);
data = ast_read32(ast, 0x1202c);
data &= 0xfffcffff;
ast_write32(ast, 0, data);
}
else
ast_init_analog(dev);
}
}
}
......@@ -125,8 +125,9 @@ struct ast_gem_object;
#define AST_IO_AR_PORT_WRITE (0x40)
#define AST_IO_MISC_PORT_WRITE (0x42)
#define AST_IO_VGA_ENABLE_PORT (0x43)
#define AST_IO_SEQ_PORT (0x44)
#define AST_DAC_INDEX_READ (0x3c7)
#define AST_IO_DAC_INDEX_READ (0x47)
#define AST_IO_DAC_INDEX_WRITE (0x48)
#define AST_IO_DAC_DATA (0x49)
#define AST_IO_GR_PORT (0x4E)
......@@ -134,6 +135,8 @@ struct ast_gem_object;
#define AST_IO_INPUT_STATUS1_READ (0x5A)
#define AST_IO_MISC_PORT_READ (0x4C)
#define AST_IO_MM_OFFSET (0x380)
#define __ast_read(x) \
static inline u##x ast_read##x(struct ast_private *ast, u32 reg) { \
u##x val = 0;\
......@@ -381,6 +384,9 @@ int ast_bo_push_sysram(struct ast_bo *bo);
int ast_mmap(struct file *filp, struct vm_area_struct *vma);
/* ast post */
void ast_enable_vga(struct drm_device *dev);
void ast_enable_mmio(struct drm_device *dev);
bool ast_is_vga_enabled(struct drm_device *dev);
void ast_post_gpu(struct drm_device *dev);
u32 ast_mindwm(struct ast_private *ast, u32 r);
void ast_moutdwm(struct ast_private *ast, u32 r, u32 v);
......
......@@ -63,7 +63,7 @@ uint8_t ast_get_index_reg_mask(struct ast_private *ast,
}
static int ast_detect_chip(struct drm_device *dev)
static int ast_detect_chip(struct drm_device *dev, bool *need_post)
{
struct ast_private *ast = dev->dev_private;
uint32_t data, jreg;
......@@ -110,6 +110,21 @@ static int ast_detect_chip(struct drm_device *dev)
}
}
/*
* If VGA isn't enabled, we need to enable now or subsequent
* access to the scratch registers will fail. We also inform
* our caller that it needs to POST the chip
* (Assumption: VGA not enabled -> need to POST)
*/
if (!ast_is_vga_enabled(dev)) {
ast_enable_vga(dev);
ast_enable_mmio(dev);
DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
*need_post = true;
} else
*need_post = false;
/* Check if we support wide screen */
switch (ast->chip) {
case AST1180:
ast->support_wide_screen = true;
......@@ -125,6 +140,7 @@ static int ast_detect_chip(struct drm_device *dev)
ast->support_wide_screen = true;
else {
ast->support_wide_screen = false;
/* Read SCU7c (silicon revision register) */
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
......@@ -137,11 +153,29 @@ static int ast_detect_chip(struct drm_device *dev)
break;
}
/* Check 3rd Tx option (digital output afaik) */
ast->tx_chip_type = AST_TX_NONE;
/*
* VGACRA3 Enhanced Color Mode Register, check if DVO is already
* enabled, in that case, assume we have a SIL164 TMDS transmitter
*
* Don't make that assumption if we the chip wasn't enabled and
* is at power-on reset, otherwise we'll incorrectly "detect" a
* SIL164 when there is none.
*/
if (!*need_post) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
if (jreg & 0x80)
ast->tx_chip_type = AST_TX_SIL164;
}
if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
/*
* On AST2300 and 2400, look the configuration set by the SoC in
* the SOC scratch register #1 bits 11:8 (interestingly marked
* as "reserved" in the spec)
*/
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg) {
case 0x04:
......@@ -162,6 +196,17 @@ static int ast_detect_chip(struct drm_device *dev)
}
}
/* Print stuff for diagnostic purposes */
switch(ast->tx_chip_type) {
case AST_TX_SIL164:
DRM_INFO("Using Sil164 TMDS transmitter\n");
break;
case AST_TX_DP501:
DRM_INFO("Using DP501 DisplayPort transmitter\n");
break;
default:
DRM_INFO("Analog VGA only\n");
}
return 0;
}
......@@ -346,6 +391,7 @@ static u32 ast_get_vram_info(struct drm_device *dev)
int ast_driver_load(struct drm_device *dev, unsigned long flags)
{
struct ast_private *ast;
bool need_post;
int ret = 0;
ast = kzalloc(sizeof(struct ast_private), GFP_KERNEL);
......@@ -360,13 +406,27 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
ret = -EIO;
goto out_free;
}
/*
* If we don't have IO space at all, use MMIO now and
* assume the chip has MMIO enabled by default (rev 0x20
* and higher).
*/
if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
DRM_INFO("platform has no IO space, trying MMIO\n");
ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
}
/* "map" IO regs if the above hasn't done so already */
if (!ast->ioregs) {
ast->ioregs = pci_iomap(dev->pdev, 2, 0);
if (!ast->ioregs) {
ret = -EIO;
goto out_free;
}
}
ast_detect_chip(dev);
ast_detect_chip(dev, &need_post);
if (ast->chip != AST1180) {
ast_get_dram_info(dev);
......@@ -374,6 +434,9 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
DRM_INFO("dram %d %d %d %08x\n", ast->mclk, ast->dram_type, ast->dram_bus_width, ast->vram_size);
}
if (need_post)
ast_post_gpu(dev);
ret = ast_mm_init(ast);
if (ret)
goto out_free;
......
......@@ -33,18 +33,23 @@
static void ast_init_dram_2300(struct drm_device *dev);
static void
ast_enable_vga(struct drm_device *dev)
void ast_enable_vga(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
ast_io_write8(ast, AST_IO_VGA_ENABLE_PORT, 0x01);
ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, 0x01);
}
void ast_enable_mmio(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
ast_io_write8(ast, 0x43, 0x01);
ast_io_write8(ast, 0x42, 0x01);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04);
}
#if 0 /* will use later */
static bool
ast_is_vga_enabled(struct drm_device *dev)
bool ast_is_vga_enabled(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 ch;
......@@ -52,7 +57,7 @@ ast_is_vga_enabled(struct drm_device *dev)
if (ast->chip == AST1180) {
/* TODO 1180 */
} else {
ch = ast_io_read8(ast, 0x43);
ch = ast_io_read8(ast, AST_IO_VGA_ENABLE_PORT);
if (ch) {
ast_open_key(ast);
ch = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff);
......@@ -61,7 +66,6 @@ ast_is_vga_enabled(struct drm_device *dev)
}
return 0;
}
#endif
static const u8 extreginfo[] = { 0x0f, 0x04, 0x1c, 0xff };
static const u8 extreginfo_ast2300a0[] = { 0x0f, 0x04, 0x1c, 0xff };
......@@ -371,6 +375,7 @@ void ast_post_gpu(struct drm_device *dev)
pci_write_config_dword(ast->dev->pdev, 0x04, reg);
ast_enable_vga(dev);
ast_enable_mmio(dev);
ast_open_key(ast);
ast_set_def_ext_reg(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment