[SCSI] qla4xxx: added IPv6 support.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/qla4xxx/ql4_def.h

@@ -114,6 +114,7 @@
  */
 #define MAC_ADDR_LEN			6	/* in bytes */
 #define IP_ADDR_LEN			4	/* in bytes */
+#define IPv6_ADDR_LEN			16	/* IPv6 address size */
 #define DRIVER_NAME			"qla4xxx"
 
 #define MAX_LINKED_CMDS_PER_LUN		3
@@ -220,7 +221,7 @@ struct ddb_entry {
 
 	uint16_t os_target_id;	/* Target ID */
 	uint16_t fw_ddb_index;	/* DDB firmware index */
-	uint8_t reserved[2];
+	uint16_t options;
 	uint32_t fw_ddb_device_state; /* F/W Device State  -- see ql4_fw.h */
 
 	uint32_t CmdSn;
@@ -245,10 +246,18 @@ struct ddb_entry {
 
 	uint16_t port;
 	uint32_t tpgt;
-	uint8_t ip_addr[ISCSI_IPADDR_SIZE];
+	uint8_t ip_addr[IP_ADDR_LEN];
 	uint8_t iscsi_name[ISCSI_NAME_SIZE];	/* 72 x48 */
 	uint8_t iscsi_alias[0x20];
 	uint8_t isid[6];
+	uint16_t iscsi_max_burst_len;
+	uint16_t iscsi_max_outsnd_r2t;
+	uint16_t iscsi_first_burst_len;
+	uint16_t iscsi_max_rcv_data_seg_len;
+	uint16_t iscsi_max_snd_data_seg_len;
+
+	struct in6_addr remote_ipv6_addr;
+	struct in6_addr link_local_ipv6_addr;
 };
 
 /*
@@ -441,8 +450,35 @@ struct scsi_qla_host {
 
 	/* Saved srb for status continuation entry processing */
 	struct srb *status_srb;
+
+	/* IPv6 support info from InitFW */
+	uint8_t acb_version;
+	uint8_t ipv4_addr_state;
+	uint16_t ipv4_options;
+
+	uint32_t resvd2;
+	uint32_t ipv6_options;
+	uint32_t ipv6_addl_options;
+	uint8_t ipv6_link_local_state;
+	uint8_t ipv6_addr0_state;
+	uint8_t ipv6_addr1_state;
+	uint8_t ipv6_default_router_state;
+	struct in6_addr ipv6_link_local_addr;
+	struct in6_addr ipv6_addr0;
+	struct in6_addr ipv6_addr1;
+	struct in6_addr ipv6_default_router_addr;
 };
 
+static inline int is_ipv4_enabled(struct scsi_qla_host *ha)
+{
+	return ((ha->ipv4_options & IPOPT_IPv4_PROTOCOL_ENABLE) != 0);
+}
+
+static inline int is_ipv6_enabled(struct scsi_qla_host *ha)
+{
+	return ((ha->ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE) != 0);
+}
+
 static inline int is_qla4010(struct scsi_qla_host *ha)
 {
 	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP4010;

drivers/scsi/qla4xxx/ql4_fw.h

@@ -258,13 +258,15 @@ union external_hw_config_reg {
 /* Mailbox 1 */
 #define FW_STATE_READY				0x0000
 #define FW_STATE_CONFIG_WAIT			0x0001
-#define FW_STATE_WAIT_LOGIN			0x0002
+#define FW_STATE_WAIT_AUTOCONNECT		0x0002
 #define FW_STATE_ERROR				0x0004
-#define FW_STATE_DHCP_IN_PROGRESS		0x0008
+#define FW_STATE_CONFIGURING_IP			0x0008
 
 /* Mailbox 3 */
 #define FW_ADDSTATE_OPTICAL_MEDIA		0x0001
-#define FW_ADDSTATE_DHCP_ENABLED		0x0002
+#define FW_ADDSTATE_DHCPv4_ENABLED		0x0002
+#define FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED	0x0004
+#define FW_ADDSTATE_DHCPv4_LEASE_EXPIRED	0x0008
 #define FW_ADDSTATE_LINK_UP			0x0010
 #define FW_ADDSTATE_ISNS_SVC_ENABLED		0x0020
 #define MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS	0x006B
@@ -320,6 +322,8 @@ union external_hw_config_reg {
 /* Host Adapter Initialization Control Block (from host) */
 struct addr_ctrl_blk {
 	uint8_t version;	/* 00 */
+#define  IFCB_VER_MIN			0x01
+#define  IFCB_VER_MAX			0x02
 	uint8_t control;	/* 01 */
 
 	uint16_t fw_options;	/* 02-03 */
@@ -351,11 +355,16 @@ struct addr_ctrl_blk {
 	uint16_t iscsi_opts;	/* 30-31 */
 	uint16_t ipv4_tcp_opts;	/* 32-33 */
 	uint16_t ipv4_ip_opts;	/* 34-35 */
+#define  IPOPT_IPv4_PROTOCOL_ENABLE	0x8000
 
 	uint16_t iscsi_max_pdu_size;	/* 36-37 */
 	uint8_t ipv4_tos;	/* 38 */
 	uint8_t ipv4_ttl;	/* 39 */
 	uint8_t acb_version;	/* 3A */
+#define ACB_NOT_SUPPORTED		0x00
+#define ACB_SUPPORTED			0x02 /* Capable of ACB Version 2
+						Features */
+
 	uint8_t res2;	/* 3B */
 	uint16_t def_timeout;	/* 3C-3D */
 	uint16_t iscsi_fburst_len;	/* 3E-3F */
@@ -397,16 +406,35 @@ struct addr_ctrl_blk {
 	uint32_t cookie;	/* 200-203 */
 	uint16_t ipv6_port;	/* 204-205 */
 	uint16_t ipv6_opts;	/* 206-207 */
+#define IPV6_OPT_IPV6_PROTOCOL_ENABLE	0x8000
+
 	uint16_t ipv6_addtl_opts;	/* 208-209 */
+#define IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE	0x0002 /* Pri ACB
+								  Only */
+#define IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR		0x0001
+
 	uint16_t ipv6_tcp_opts;	/* 20A-20B */
 	uint8_t ipv6_tcp_wsf;	/* 20C */
 	uint16_t ipv6_flow_lbl;	/* 20D-20F */
-	uint8_t ipv6_gw_addr[16];	/* 210-21F */
+	uint8_t ipv6_dflt_rtr_addr[16]; /* 210-21F */
 	uint16_t ipv6_vlan_tag;	/* 220-221 */
 	uint8_t ipv6_lnk_lcl_addr_state;/* 222 */
 	uint8_t ipv6_addr0_state;	/* 223 */
 	uint8_t ipv6_addr1_state;	/* 224 */
-	uint8_t ipv6_gw_state;	/* 225 */
+#define IP_ADDRSTATE_UNCONFIGURED	0
+#define IP_ADDRSTATE_INVALID		1
+#define IP_ADDRSTATE_ACQUIRING		2
+#define IP_ADDRSTATE_TENTATIVE		3
+#define IP_ADDRSTATE_DEPRICATED		4
+#define IP_ADDRSTATE_PREFERRED		5
+#define IP_ADDRSTATE_DISABLING		6
+
+	uint8_t ipv6_dflt_rtr_state;    /* 225 */
+#define IPV6_RTRSTATE_UNKNOWN                   0
+#define IPV6_RTRSTATE_MANUAL                    1
+#define IPV6_RTRSTATE_ADVERTISED                3
+#define IPV6_RTRSTATE_STALE                     4
+
 	uint8_t ipv6_traffic_class;	/* 226 */
 	uint8_t ipv6_hop_limit;	/* 227 */
 	uint8_t ipv6_if_id[8];	/* 228-22F */
@@ -424,7 +452,7 @@ struct addr_ctrl_blk {
 
 struct init_fw_ctrl_blk {
 	struct addr_ctrl_blk pri;
-	struct addr_ctrl_blk sec;
+/*	struct addr_ctrl_blk sec;*/
 };
 
 /*************************************************************************/
@@ -433,6 +461,9 @@ struct dev_db_entry {
 	uint16_t options;	/* 00-01 */
 #define DDB_OPT_DISC_SESSION  0x10
 #define DDB_OPT_TARGET	      0x02 /* device is a target */
+#define DDB_OPT_IPV6_DEVICE	0x100
+#define DDB_OPT_IPV6_NULL_LINK_LOCAL		0x800 /* post connection */
+#define DDB_OPT_IPV6_FW_DEFINED_LINK_LOCAL	0x800 /* pre connection */
 
 	uint16_t exec_throttle;	/* 02-03 */
 	uint16_t exec_count;	/* 04-05 */
@@ -468,7 +499,7 @@ struct dev_db_entry {
 					 * pointer to a string so we
 					 * don't have to reserve soooo
 					 * much RAM */
-	uint8_t ipv6_addr[0x10];/* 1A0-1AF */
+	uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */
 	uint8_t res5[0x10];	/* 1B0-1BF */
 	uint16_t ddb_link;	/* 1C0-1C1 */
 	uint16_t chap_tbl_idx;	/* 1C2-1C3 */

drivers/scsi/qla4xxx/ql4_init.c

@@ -189,6 +189,78 @@ static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
 	return qla4xxx_get_firmware_status(ha);
 }
 
+static uint8_t
+qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha)
+{
+	uint8_t ipv4_wait = 0;
+	uint8_t ipv6_wait = 0;
+	int8_t ip_address[IPv6_ADDR_LEN] = {0} ;
+
+	/* If both IPv4 & IPv6 are enabled, possibly only one
+	 * IP address may be acquired, so check to see if we
+	 * need to wait for another */
+	if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) {
+		if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) &&
+		    ((ha->addl_fw_state &
+				    FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) {
+			ipv4_wait = 1;
+		}
+		if (((ha->ipv6_addl_options &
+			    IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) &&
+		    ((ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING))) {
+
+			ipv6_wait = 1;
+
+			if ((ha->ipv6_link_local_state ==
+						     IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ipv6_addr0_state == IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ipv6_addr1_state == IP_ADDRSTATE_PREFERRED)) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "Preferred IP configured."
+					      " Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if (memcmp(&ha->ipv6_default_router_addr, ip_address,
+				IPv6_ADDR_LEN) == 0) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "No Router configured. "
+					      "Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if ((ha->ipv6_default_router_state ==
+						IPV6_RTRSTATE_MANUAL) &&
+			    (ha->ipv6_link_local_state ==
+						IP_ADDRSTATE_TENTATIVE) &&
+			    (memcmp(&ha->ipv6_link_local_addr,
+				    &ha->ipv6_default_router_addr, 4) == 0)) {
+				DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
+					"IP configured. Don't wait!\n",
+					ha->host_no, __func__));
+				ipv6_wait = 0;
+			}
+		}
+		if (ipv4_wait || ipv6_wait) {
+			DEBUG2(printk("scsi%ld: %s: Wait for additional "
+				      "IP(s) \"", ha->host_no, __func__));
+			if (ipv4_wait)
+				DEBUG2(printk("IPv4 "));
+			if (ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6LinkLocal "));
+			if (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr0 "));
+			if (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr1 "));
+			DEBUG2(printk("\"\n"));
+		}
+	}
+
+	return ipv4_wait|ipv6_wait;
+}
+
 static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 {
 	uint32_t timeout_count;
@@ -226,21 +298,62 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 			continue;
 		}
 
+		if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      "AUTOCONNECT in progress\n",
+				      ha->host_no, __func__));
+		}
+
+		if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      " CONFIGURING IP\n",
+				      ha->host_no, __func__));
+			/*
+			 * Check for link state after 15 secs and if link is
+			 * still DOWN then, cable is unplugged. Ignore "DHCP
+			 * in Progress/CONFIGURING IP" bit to check if firmware
+			 * is in ready state or not after 15 secs.
+			 * This is applicable for both 2.x & 3.x firmware
+			 */
+			if (timeout_count <= (ADAPTER_INIT_TOV - 15)) {
+				if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s:"
+						  " LINK UP (Cable plugged)\n",
+						  ha->host_no, __func__));
+				} else if (ha->firmware_state &
+					  (FW_STATE_CONFIGURING_IP |
+							     FW_STATE_READY)) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+						"LINK DOWN (Cable unplugged)\n",
+						ha->host_no, __func__));
+					ha->firmware_state = FW_STATE_READY;
+				}
+			}
+		}
+
 		if (ha->firmware_state == FW_STATE_READY) {
-			DEBUG2(dev_info(&ha->pdev->dev, "Firmware Ready..\n"));
-			/* The firmware is ready to process SCSI commands. */
+			/* If DHCP IP Addr is available, retrieve it now. */
+			if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR,
+								&ha->dpc_flags))
+				qla4xxx_get_dhcp_ip_address(ha);
+
+			if (!qla4xxx_wait_for_ip_config(ha) ||
+							timeout_count == 1) {
 				DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: MEDIA TYPE - %s\n",
-					  ha->host_no,
+						"Firmware Ready..\n"));
+				/* The firmware is ready to process SCSI
+				   commands. */
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: MEDIA TYPE"
+					" - %s\n", ha->host_no,
 					__func__, (ha->addl_fw_state &
 					FW_ADDSTATE_OPTICAL_MEDIA)
 					!= 0 ? "OPTICAL" : "COPPER"));
 				DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: DHCP STATE Enabled "
-					  "%s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_DHCP_ENABLED) != 0 ?
+					"scsi%ld: %s: DHCPv4 STATE"
+					" Enabled %s\n", ha->host_no,
+					 __func__, (ha->addl_fw_state &
+					 FW_ADDSTATE_DHCPv4_ENABLED) != 0 ?
 					"YES" : "NO"));
 				DEBUG2(dev_info(&ha->pdev->dev,
 					"scsi%ld: %s: LINK %s\n",
@@ -259,6 +372,7 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 				ready = 1;
 				break;
 			}
+		}
 		DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
 			      "seconds expired= %d\n", ha->host_no, __func__,
 			      ha->firmware_state, ha->addl_fw_state,
@@ -272,15 +386,19 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 		msleep(1000);
 	}			/* end of for */
 
-	if (timeout_count == 0)
+	if (timeout_count <= 0)
 		DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
 			      ha->host_no, __func__));
 
-	if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)  {
-		DEBUG2(printk("scsi%ld: %s: FW is reporting its waiting to"
-			      " grab an IP address from DHCP server\n",
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "
+			      "it's waiting to configure an IP address\n",
 			       ha->host_no, __func__));
 		ready = 1;
+	} else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but "
+			      "auto-discovery still in process\n",
+			       ha->host_no, __func__));
 	}
 
 	return ready;
@@ -419,6 +537,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	}
 
 	status = QLA_SUCCESS;
+	ddb_entry->options = le16_to_cpu(fw_ddb_entry->options);
 	ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid);
 	ddb_entry->task_mgmt_timeout =
 		le16_to_cpu(fw_ddb_entry->def_timeout);
@@ -442,11 +561,30 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0],
 	       min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr)));
 
+	ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len;
+	ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t;
+	ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len;
+	ddb_entry->iscsi_max_rcv_data_seg_len =
+				fw_ddb_entry->iscsi_max_rcv_data_seg_len;
+	ddb_entry->iscsi_max_snd_data_seg_len =
+				fw_ddb_entry->iscsi_max_snd_data_seg_len;
+
+	if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) {
+		memcpy(&ddb_entry->remote_ipv6_addr,
+			fw_ddb_entry->ip_addr,
+			min(sizeof(ddb_entry->remote_ipv6_addr),
+			sizeof(fw_ddb_entry->ip_addr)));
+		memcpy(&ddb_entry->link_local_ipv6_addr,
+			fw_ddb_entry->link_local_ipv6_addr,
+			min(sizeof(ddb_entry->link_local_ipv6_addr),
+			sizeof(fw_ddb_entry->link_local_ipv6_addr)));
+	}
+
 	DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n",
 			ha->host_no, __func__, fw_ddb_index,
 			ddb_entry->fw_ddb_device_state, status));
 
- exit_update_ddb:
+exit_update_ddb:
 	if (fw_ddb_entry)
 		dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
 				  fw_ddb_entry, fw_ddb_entry_dma);
@@ -1166,7 +1304,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
 	 * the ddb_list and wait for DHCP lease acquired aen to come in
 	 * followed by 0x8014 aen" to trigger the tgt discovery process.
 	 */
-	if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP)
 		goto exit_init_online;
 
 	/* Skip device discovery if ip and subnet is zero */