Make main-title more concise.

Rename "General setup" to "Processor type and features".
Move ACPI types after the point where HP_SIM gets defined.
Pick up HP Ski configuration options from arch/ia64/hp/Config.in.

arch/ia64/config.in

-mainmenu_name "Kernel configuration of Linux for IA-64 machines"
+mainmenu_name "IA-64 Linux Kernel Configuration"
 
 source init/Config.in
 
 mainmenu_option next_comment
-comment 'General setup'
+comment 'Processor type and features'
 
 define_bool CONFIG_IA64 y
 
@@ -14,13 +14,6 @@ define_bool CONFIG_SBUS n
 define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
 define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
 
-if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
-  define_bool CONFIG_ACPI y
-  define_bool CONFIG_ACPI_EFI y
-  define_bool CONFIG_ACPI_INTERPRETER y
-  define_bool CONFIG_ACPI_KERNEL_CONFIG y
-fi
-
 choice 'IA-64 processor type' \
 	"Itanium			CONFIG_ITANIUM \
 	 McKinley			CONFIG_MCKINLEY" Itanium
@@ -38,6 +31,13 @@ choice 'Kernel page size'						\
 	 16KB			CONFIG_IA64_PAGE_SIZE_16KB		\
 	 64KB			CONFIG_IA64_PAGE_SIZE_64KB" 16KB
 
+if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
+  define_bool CONFIG_ACPI y
+  define_bool CONFIG_ACPI_EFI y
+  define_bool CONFIG_ACPI_INTERPRETER y
+  define_bool CONFIG_ACPI_KERNEL_CONFIG y
+fi
+
 if [ "$CONFIG_ITANIUM" = "y" ]; then
 	define_bool CONFIG_IA64_BRL_EMU y
 	bool '  Enable Itanium B-step specific code' CONFIG_ITANIUM_BSTEP_SPECIFIC
@@ -239,15 +239,7 @@ fi
 fi # !HP_SIM
 
 if [ "$CONFIG_IA64_HP_SIM" != "n" -o "$CONFIG_IA64_GENERIC" != "n" ]; then
-  mainmenu_option next_comment
-  comment 'Simulated drivers'
-
-  bool 'Simulated Ethernet ' CONFIG_SIMETH
-  bool 'Simulated serial driver support' CONFIG_SIM_SERIAL
-  if [ "$CONFIG_SCSI" != "n" ]; then
-    bool 'Simulated SCSI disk' CONFIG_SCSI_SIM
-  fi
-  endmenu
+  source arch/ia64/hp/Config.in
 fi
 
 
@@ -269,15 +261,6 @@ if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then
    bool '  Spinlock debugging' CONFIG_DEBUG_SPINLOCK
    bool '  Turn on compare-and-exchange bug checking (slow!)' CONFIG_IA64_DEBUG_CMPXCHG
    bool '  Turn on irq debug checks (slow!)' CONFIG_IA64_DEBUG_IRQ
-   bool '  Built-in Kernel Debugger support' CONFIG_KDB
-   dep_tristate '    KDB modules' CONFIG_KDB_MODULES $CONFIG_KDB
-   if [ "$CONFIG_KDB" = "y" ]; then
-      bool '    KDB off by default' CONFIG_KDB_OFF
-      comment '  Load all symbols for debugging is required for KDB'
-      define_bool CONFIG_KALLSYMS y
-   else
-      bool '  Load all symbols for debugging' CONFIG_KALLSYMS
-   fi
 fi
 
 endmenu

arch/ia64/defconfig

@@ -183,7 +183,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_IDE=y
 
 #
-# IDE, ATA and ATAPI Block devices
+# ATA and ATAPI Block devices
 #
 CONFIG_BLK_DEV_IDE=y
 
@@ -218,16 +218,14 @@ CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_BLK_DEV_ISAPNP is not set
 # CONFIG_BLK_DEV_RZ1000 is not set
 CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 # CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_IDEDMA_ONLYDISK is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_PCI_WIP is not set
-# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
 # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
-CONFIG_BLK_DEV_ADMA=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_AEC62XX_TUNING is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
@@ -254,8 +252,8 @@ CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_DMA_NONPCI is not set
 CONFIG_BLK_DEV_IDE_MODES=y
 # CONFIG_BLK_DEV_ATARAID is not set
@@ -817,6 +815,7 @@ CONFIG_USB_UHCI=m
 # USB Device Class drivers
 #
 # CONFIG_USB_AUDIO is not set
+# CONFIG_USB_EMI26 is not set
 # CONFIG_USB_BLUETOOTH is not set
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_STORAGE_DEBUG is not set

arch/ia64/hp/Makefile

 #
 # ia64/platform/hp/Makefile
 #
+# Copyright (C) 2002 Hewlett-Packard Co.
+#	David Mosberger-Tang <davidm@hpl.hp.com>
 # Copyright (C) 1999 Silicon Graphics, Inc.
 # Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
 #
@@ -12,6 +14,10 @@ O_TARGET := hp.a
 obj-y := hpsim_console.o hpsim_irq.o hpsim_setup.o
 obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
 
+obj-$(CONFIG_SIMETH)	+= simeth.o
+obj-$(CONFIG_SIM_SERIAL) += simserial.o
+obj-$(CONFIG_SCSI_SIM)	+= simscsi.o
+
 clean::
 
 include $(TOPDIR)/Rules.make

arch/ia64/hp/simeth.c

+/*
+ * Simulated Ethernet Driver
+ *
+ * Copyright (C) 1999-2001 Hewlett-Packard Co
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <linux/notifier.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+#define SIMETH_RECV_MAX	10
+
+/*
+ * Maximum possible received frame for Ethernet.
+ * We preallocate an sk_buff of that size to avoid costly
+ * memcpy for temporary buffer into sk_buff. We do basically
+ * what's done in other drivers, like eepro with a ring.
+ * The difference is, of course, that we don't have real DMA !!!
+ */
+#define SIMETH_FRAME_SIZE	ETH_FRAME_LEN
+
+
+#define SSC_NETDEV_PROBE		100
+#define SSC_NETDEV_SEND			101
+#define SSC_NETDEV_RECV			102
+#define SSC_NETDEV_ATTACH		103
+#define SSC_NETDEV_DETACH		104
+
+#define NETWORK_INTR			8
+
+struct simeth_local {
+	struct net_device_stats stats;
+	int 			simfd;	 /* descriptor in the simulator */
+};
+
+static int simeth_probe1(void);
+static int simeth_open(struct net_device *dev);
+static int simeth_close(struct net_device *dev);
+static int simeth_tx(struct sk_buff *skb, struct net_device *dev);
+static int simeth_rx(struct net_device *dev);
+static struct net_device_stats *simeth_get_stats(struct net_device *dev);
+static void simeth_interrupt(int irq, void *dev_id, struct pt_regs * regs);
+static void set_multicast_list(struct net_device *dev);
+static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr);
+
+static char *simeth_version="0.3";
+
+/*
+ * This variable is used to establish a mapping between the Linux/ia64 kernel
+ * and the host linux kernel.
+ *
+ * As of today, we support only one card, even though most of the code
+ * is ready for many more. The mapping is then:
+ *	linux/ia64 -> linux/x86
+ * 	   eth0    -> eth1
+ *
+ * In the future, we some string operations, we could easily support up
+ * to 10 cards (0-9).
+ *
+ * The default mapping can be changed on the kernel command line by
+ * specifying simeth=ethX (or whatever string you want).
+ */
+static char *simeth_device="eth0";	 /* default host interface to use */
+
+
+
+static volatile unsigned int card_count; /* how many cards "found" so far */
+static int simeth_debug;		/* set to 1 to get debug information */
+
+/*
+ * Used to catch IFF_UP & IFF_DOWN events
+ */
+static struct notifier_block simeth_dev_notifier = {
+	simeth_device_event,
+	0
+};
+
+
+/*
+ * Function used when using a kernel command line option.
+ *
+ * Format: simeth=interface_name (like eth0)
+ */
+static int __init
+simeth_setup(char *str)
+{
+	simeth_device = str;
+	return 1;
+}
+
+__setup("simeth=", simeth_setup);
+
+/*
+ * Function used to probe for simeth devices when not installed
+ * as a loadable module
+ */
+
+int __init
+simeth_probe (void)
+{
+	int r;
+
+	printk("simeth: v%s\n", simeth_version);
+
+	r = simeth_probe1();
+
+	if (r == 0) register_netdevice_notifier(&simeth_dev_notifier);
+
+	return r;
+}
+
+extern long ia64_ssc (long, long, long, long, int);
+extern void ia64_ssc_connect_irq (long intr, long irq);
+
+static inline int
+netdev_probe(char *name, unsigned char *ether)
+{
+	return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE);
+}
+
+
+static inline int
+netdev_connect(int irq)
+{
+	/* XXX Fix me
+	 * this does not support multiple cards
+	 * also no return value
+	 */
+	ia64_ssc_connect_irq(NETWORK_INTR, irq);
+	return 0;
+}
+
+static inline int
+netdev_attach(int fd, int irq, unsigned int ipaddr)
+{
+	/* this puts the host interface in the right mode (start interupting) */
+	return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH);
+}
+
+
+static inline int
+netdev_detach(int fd)
+{
+	/*
+	 * inactivate the host interface (don't interrupt anymore) */
+	return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH);
+}
+
+static inline int
+netdev_send(int fd, unsigned char *buf, unsigned int len)
+{
+	return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND);
+}
+
+static inline int
+netdev_read(int fd, unsigned char *buf, unsigned int len)
+{
+	return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
+}
+
+/*
+ * Function shared with module code, so cannot be in init section
+ *
+ * So far this function "detects" only one card (test_&_set) but could
+ * be extended easily.
+ *
+ * Return:
+ * 	- -ENODEV is no device found
+ *	- -ENOMEM is no more memory
+ *	- 0 otherwise
+ */
+static int
+simeth_probe1(void)
+{
+	unsigned char mac_addr[ETH_ALEN];
+	struct simeth_local *local;
+	struct net_device *dev;
+	int fd, i;
+
+	/*
+	 * XXX Fix me
+	 * let's support just one card for now
+	 */
+	if (test_and_set_bit(0, &card_count))
+		return -ENODEV;
+
+	/*
+	 * check with the simulator for the device
+	 */
+	fd = netdev_probe(simeth_device, mac_addr);
+	if (fd == -1)
+		return -ENODEV;
+
+	dev = init_etherdev(NULL, sizeof(struct simeth_local));
+	if (!dev)
+		return -ENOMEM;
+
+	memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
+
+	dev->irq = ia64_alloc_irq();
+
+	/*
+	 * attach the interrupt in the simulator, this does enable interrupts
+	 * until a netdev_attach() is called
+	 */
+	netdev_connect(dev->irq);
+
+	memset(dev->priv, 0, sizeof(struct simeth_local));
+
+	local = dev->priv;
+	local->simfd = fd; /* keep track of underlying file descriptor */
+
+	dev->open		= simeth_open;
+	dev->stop		= simeth_close;
+	dev->hard_start_xmit	= simeth_tx;
+	dev->get_stats		= simeth_get_stats;
+	dev->set_multicast_list = set_multicast_list; /* no yet used */
+
+	/* Fill in the fields of the device structure with ethernet-generic values. */
+	ether_setup(dev);
+
+	printk("%s: hosteth=%s simfd=%d, HwAddr", dev->name, simeth_device, local->simfd);
+	for(i = 0; i < ETH_ALEN; i++) {
+		printk(" %2.2x", dev->dev_addr[i]);
+	}
+	printk(", IRQ %d\n", dev->irq);
+
+		return 0;
+}
+
+/*
+ * actually binds the device to an interrupt vector
+ */
+static int
+simeth_open(struct net_device *dev)
+{
+	if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) {
+		printk ("simeth: unable to get IRQ %d.\n", dev->irq);
+		return -EAGAIN;
+	}
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+/* copied from lapbether.c */
+static __inline__ int dev_is_ethdev(struct net_device *dev)
+{
+       return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
+}
+
+
+/*
+ * Handler for IFF_UP or IFF_DOWN
+ *
+ * The reason for that is that we don't want to be interrupted when the
+ * interface is down. There is no way to unconnect in the simualtor. Instead
+ * we use this function to shutdown packet processing in the frame filter
+ * in the simulator. Thus no interrupts are generated
+ *
+ *
+ * That's also the place where we pass the IP address of this device to the
+ * simulator so that that we can start filtering packets for it
+ *
+ * There may be a better way of doing this, but I don't know which yet.
+ */
+static int
+simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
+{
+	struct net_device *dev = (struct net_device *)ptr;
+	struct simeth_local *local;
+	struct in_device *in_dev;
+	struct in_ifaddr **ifap = NULL;
+	struct in_ifaddr *ifa = NULL;
+	int r;
+
+
+	if ( ! dev ) {
+		printk(KERN_WARNING "simeth_device_event dev=0\n");
+		return NOTIFY_DONE;
+	}
+
+	if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
+
+	/*
+	 * Check whether or not it's for an ethernet device
+	 *
+	 * XXX Fixme: This works only as long as we support one
+	 * type of ethernet device.
+	 */
+	if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE;
+
+	if ((in_dev=dev->ip_ptr) != NULL) {
+		for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next)
+			if (strcmp(dev->name, ifa->ifa_label) == 0) break;
+	}
+	if ( ifa == NULL ) {
+		printk("simeth_open: can't find device %s's ifa\n", dev->name);
+		return NOTIFY_DONE;
+	}
+
+	printk("simeth_device_event: %s ipaddr=0x%x\n", dev->name, htonl(ifa->ifa_local));
+
+	/*
+	 * XXX Fix me
+	 * if the device was up, and we're simply reconfiguring it, not sure
+	 * we get DOWN then UP.
+	 */
+
+	local = dev->priv;
+	/* now do it for real */
+	r = event == NETDEV_UP ?
+		netdev_attach(local->simfd, dev->irq, htonl(ifa->ifa_local)):
+		netdev_detach(local->simfd);
+
+	printk("simeth: netdev_attach/detach: event=%s ->%d\n", event == NETDEV_UP ? "attach":"detach", r);
+
+	return NOTIFY_DONE;
+}
+
+static int
+simeth_close(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+
+	free_irq(dev->irq, dev);
+
+	return 0;
+}
+
+/*
+ * Only used for debug
+ */
+static void
+frame_print(unsigned char *from, unsigned char *frame, int len)
+{
+	int i;
+
+	printk("%s: (%d) %02x", from, len, frame[0] & 0xff);
+	for(i=1; i < 6; i++ ) {
+		printk(":%02x", frame[i] &0xff);
+	}
+	printk(" %2x", frame[6] &0xff);
+	for(i=7; i < 12; i++ ) {
+		printk(":%02x", frame[i] &0xff);
+	}
+	printk(" [%02x%02x]\n", frame[12], frame[13]);
+
+	for(i=14; i < len; i++ ) {
+		printk("%02x ", frame[i] &0xff);
+		if ( (i%10)==0) printk("\n");
+	}
+	printk("\n");
+}
+
+
+/*
+ * Function used to transmit of frame, very last one on the path before
+ * going to the simulator.
+ */
+static int
+simeth_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct simeth_local *local = (struct simeth_local *)dev->priv;
+
+#if 0
+	/* ensure we have at least ETH_ZLEN bytes (min frame size) */
+	unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+	/* Where do the extra padding bytes comes from inthe skbuff ? */
+#else
+	/* the real driver in the host system is going to take care of that
+	 * or maybe it's the NIC itself.
+	 */
+	unsigned int length = skb->len;
+#endif
+
+	local->stats.tx_bytes += skb->len;
+	local->stats.tx_packets++;
+
+
+	if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length);
+
+	netdev_send(local->simfd, skb->data, length);
+
+	/*
+	 * we are synchronous on write, so we don't simulate a
+	 * trasnmit complete interrupt, thus we don't need to arm a tx
+	 */
+
+	dev_kfree_skb(skb);
+	return 0;
+}
+
+static inline struct sk_buff *
+make_new_skb(struct net_device *dev)
+{
+	struct sk_buff *nskb;
+
+	/*
+	 * The +2 is used to make sure that the IP header is nicely
+	 * aligned (on 4byte boundary I assume 14+2=16)
+	 */
+	nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2);
+	if ( nskb == NULL ) {
+		printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
+		return NULL;
+	}
+	nskb->dev = dev;
+
+	skb_reserve(nskb, 2);	/* Align IP on 16 byte boundaries */
+
+	skb_put(nskb,SIMETH_FRAME_SIZE);
+
+	return nskb;
+}
+
+/*
+ * called from interrupt handler to process a received frame
+ */
+static int
+simeth_rx(struct net_device *dev)
+{
+	struct simeth_local	*local;
+	struct sk_buff		*skb;
+	int			len;
+	int			rcv_count = SIMETH_RECV_MAX;
+
+	local = (struct simeth_local *)dev->priv;
+	/*
+	 * the loop concept has been borrowed from other drivers
+	 * looks to me like it's a throttling thing to avoid pushing to many
+	 * packets at one time into the stack. Making sure we can process them
+	 * upstream and make forward progress overall
+	 */
+	do {
+		if ( (skb=make_new_skb(dev)) == NULL ) {
+			printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
+			local->stats.rx_dropped++;
+			return 0;
+		}
+		/*
+		 * Read only one frame at a time
+		 */
+		len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE);
+		if ( len == 0 ) {
+			if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n", dev->name, SIMETH_RECV_MAX-rcv_count);
+			break;
+		}
+#if 0
+		/*
+		 * XXX Fix me
+		 * Should really do a csum+copy here
+		 */
+		memcpy(skb->data, frame, len);
+#endif
+		skb->protocol = eth_type_trans(skb, dev);
+
+		if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len);
+
+		/*
+		 * push the packet up & trigger software interrupt
+		 */
+		netif_rx(skb);
+
+		local->stats.rx_packets++;
+		local->stats.rx_bytes += len;
+
+	} while ( --rcv_count );
+
+	return len; /* 0 = nothing left to read, otherwise, we can try again */
+}
+
+/*
+ * Interrupt handler (Yes, we can do it too !!!)
+ */
+static void
+simeth_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	struct net_device *dev = dev_id;
+
+	if ( dev == NULL ) {
+		printk(KERN_WARNING "simeth: irq %d for unknown device\n", irq);
+		return;
+	}
+
+	/*
+	 * very simple loop because we get interrupts only when receving
+	 */
+	while (simeth_rx(dev));
+}
+
+static struct net_device_stats *
+simeth_get_stats(struct net_device *dev)
+{
+	struct simeth_local  *local = (struct simeth_local *) dev->priv;
+
+	return &local->stats;
+}
+
+/* fake multicast ability */
+static void
+set_multicast_list(struct net_device *dev)
+{
+	printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name);
+}
+
+#ifdef CONFIG_NET_FASTROUTE
+static int
+simeth_accept_fastpath(struct net_device *dev, struct dst_entry *dst)
+{
+	printk(KERN_WARNING "%s: simeth_accept_fastpath called\n", dev->name);
+	return -1;
+}
+#endif
+
+__initcall(simeth_probe);

arch/ia64/hp/simscsi.c

+/*
+ * Simulated SCSI driver.
+ *
+ * Copyright (C) 1999, 2001-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 02/01/15 David Mosberger	Updated for v2.5.1
+ * 99/12/18 David Mosberger	Added support for READ10/WRITE10 needed by linux v2.3.33
+ */
+#include <linux/config.h>
+#include <linux/blk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+
+#include <scsi/scsi.h>
+
+#include <asm/irq.h>
+
+#include "../drivers/scsi/scsi.h"
+#include "../drivers/scsi/sd.h"
+#include "../drivers/scsi/hosts.h"
+#include "simscsi.h"
+
+#define DEBUG_SIMSCSI	1
+
+/* Simulator system calls: */
+
+#define SSC_OPEN			50
+#define SSC_CLOSE			51
+#define SSC_READ			52
+#define SSC_WRITE			53
+#define SSC_GET_COMPLETION		54
+#define SSC_WAIT_COMPLETION		55
+
+#define SSC_WRITE_ACCESS		2
+#define SSC_READ_ACCESS			1
+
+#if DEBUG_SIMSCSI
+  int simscsi_debug;
+# define DBG	simscsi_debug
+#else
+# define DBG	0
+#endif
+
+static struct Scsi_Host *host;
+
+static void simscsi_interrupt (unsigned long val);
+DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
+
+struct disk_req {
+	unsigned long addr;
+	unsigned len;
+};
+
+struct disk_stat {
+	int fd;
+	unsigned count;
+};
+
+extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
+
+static int desc[8] = { -1, -1, -1, -1, -1, -1, -1, -1 };
+
+static struct queue_entry {
+	Scsi_Cmnd *sc;
+} queue[SIMSCSI_REQ_QUEUE_LEN];
+
+static int rd, wr;
+static atomic_t num_reqs = ATOMIC_INIT(0);
+
+/* base name for default disks */
+static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
+
+#define MAX_ROOT_LEN	128
+
+/*
+ * used to setup a new base for disk images
+ * to use /foo/bar/disk[a-z] as disk images
+ * you have to specify simscsi=/foo/bar/disk on the command line
+ */
+static int __init
+simscsi_setup (char *s)
+{
+	/* XXX Fix me we may need to strcpy() ? */
+	if (strlen(s) > MAX_ROOT_LEN) {
+		printk("simscsi_setup: prefix too long---using default %s\n", simscsi_root);
+	}
+	simscsi_root = s;
+	return 1;
+}
+
+__setup("simscsi=", simscsi_setup);
+
+static void
+simscsi_interrupt (unsigned long val)
+{
+	Scsi_Cmnd *sc;
+
+	while ((sc = queue[rd].sc) != 0) {
+		atomic_dec(&num_reqs);
+		queue[rd].sc = 0;
+		if (DBG)
+			printk("simscsi_interrupt: done with %ld\n", sc->serial_number);
+		(*sc->scsi_done)(sc);
+		rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
+	}
+}
+
+int
+simscsi_detect (Scsi_Host_Template *templ)
+{
+	templ->proc_name = "simscsi";
+	host = scsi_register(templ, 0);
+	return 1;	/* fake one SCSI host adapter */
+}
+
+int
+simscsi_release (struct Scsi_Host *host)
+{
+	return 0;	/* this is easy...  */
+}
+
+const char *
+simscsi_info (struct Scsi_Host *host)
+{
+	return "simulated SCSI host adapter";
+}
+
+int
+simscsi_abort (Scsi_Cmnd *cmd)
+{
+	printk ("simscsi_abort: unimplemented\n");
+	return SCSI_ABORT_SUCCESS;
+}
+
+int
+simscsi_reset (Scsi_Cmnd *cmd, unsigned int reset_flags)
+{
+	printk ("simscsi_reset: unimplemented\n");
+	return SCSI_RESET_SUCCESS;
+}
+
+int
+simscsi_biosparam (Disk *disk, kdev_t n, int ip[])
+{
+	int size = disk->capacity;
+
+	ip[0] = 64;
+	ip[1] = 32;
+	ip[2] = size >> 11;
+	return 0;
+}
+
+static void
+simscsi_readwrite (Scsi_Cmnd *sc, int mode, unsigned long offset, unsigned long len)
+{
+	struct disk_stat stat;
+	struct disk_req req;
+
+	req.addr = __pa(sc->request_buffer);
+	req.len  = len;			/* # of bytes to transfer */
+
+	if (sc->request_bufflen < req.len)
+		return;
+
+	stat.fd = desc[sc->target];
+	if (DBG)
+		printk("simscsi_%s @ %lx (off %lx)\n",
+		       mode == SSC_READ ? "read":"write", req.addr, offset);
+	ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
+	ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
+
+	if (stat.count == req.len) {
+		sc->result = GOOD;
+	} else {
+		sc->result = DID_ERROR << 16;
+	}
+}
+
+static void
+simscsi_sg_readwrite (Scsi_Cmnd *sc, int mode, unsigned long offset)
+{
+	int list_len = sc->use_sg;
+	struct scatterlist *sl = (struct scatterlist *)sc->buffer;
+	struct disk_stat stat;
+	struct disk_req req;
+
+	stat.fd = desc[sc->target];
+
+	while (list_len) {
+		req.addr = __pa(page_address(sl->page) + sl->offset);
+		req.len  = sl->length;
+		if (DBG)
+			printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n",
+			       mode == SSC_READ ? "read":"write", req.addr, offset,
+			       list_len, sl->length);
+		ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
+		ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
+
+		/* should not happen in our case */
+		if (stat.count != req.len) {
+			sc->result = DID_ERROR << 16;
+			return;
+		}
+		offset +=  sl->length;
+		sl++;
+		list_len--;
+	}
+	sc->result = GOOD;
+}
+
+/*
+ * function handling both READ_6/WRITE_6 (non-scatter/gather mode)
+ * commands.
+ * Added 02/26/99 S.Eranian
+ */
+static void
+simscsi_readwrite6 (Scsi_Cmnd *sc, int mode)
+{
+	unsigned long offset;
+
+	offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512;
+	if (sc->use_sg > 0)
+		simscsi_sg_readwrite(sc, mode, offset);
+	else
+		simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512);
+}
+
+
+static void
+simscsi_readwrite10 (Scsi_Cmnd *sc, int mode)
+{
+	unsigned long offset;
+
+	offset = (  (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
+		  | (sc->cmnd[4] <<  8) | (sc->cmnd[5] <<  0))*512;
+	if (sc->use_sg > 0)
+		simscsi_sg_readwrite(sc, mode, offset);
+	else
+		simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
+}
+
+int
+simscsi_queuecommand (Scsi_Cmnd *sc, void (*done)(Scsi_Cmnd *))
+{
+	char fname[MAX_ROOT_LEN+16];
+	char *buf;
+#if DEBUG_SIMSCSI
+	register long sp asm ("sp");
+
+	if (DBG)
+		printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n",
+		       sc->target, sc->cmnd[0], sc->serial_number, sp, done);
+#endif
+
+	sc->result = DID_BAD_TARGET << 16;
+	sc->scsi_done = done;
+	if (sc->target <= 7 && sc->lun == 0) {
+		switch (sc->cmnd[0]) {
+		      case INQUIRY:
+			if (sc->request_bufflen < 35) {
+				break;
+			}
+			sprintf (fname, "%s%c", simscsi_root, 'a' + sc->target);
+			desc[sc->target] = ia64_ssc (__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS,
+						     0, 0, SSC_OPEN);
+			if (desc[sc->target] < 0) {
+				/* disk doesn't exist... */
+				break;
+			}
+			buf = sc->request_buffer;
+			buf[0] = 0;	/* magnetic disk */
+			buf[1] = 0;	/* not a removable medium */
+			buf[2] = 2;	/* SCSI-2 compliant device */
+			buf[3] = 2;	/* SCSI-2 response data format */
+			buf[4] = 31;	/* additional length (bytes) */
+			buf[5] = 0;	/* reserved */
+			buf[6] = 0;	/* reserved */
+			buf[7] = 0;	/* various flags */
+			memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
+			sc->result = GOOD;
+			break;
+
+		      case TEST_UNIT_READY:
+			sc->result = GOOD;
+			break;
+
+		      case READ_6:
+			if (desc[sc->target] < 0 )
+				break;
+			simscsi_readwrite6(sc, SSC_READ);
+			break;
+
+		      case READ_10:
+			if (desc[sc->target] < 0 )
+				break;
+			simscsi_readwrite10(sc, SSC_READ);
+			break;
+
+		      case WRITE_6:
+			if (desc[sc->target] < 0)
+				break;
+			simscsi_readwrite6(sc, SSC_WRITE);
+			break;
+
+		      case WRITE_10:
+			if (desc[sc->target] < 0)
+				break;
+			simscsi_readwrite10(sc, SSC_WRITE);
+			break;
+
+
+		      case READ_CAPACITY:
+			if (desc[sc->target] < 0 || sc->request_bufflen < 8) {
+				break;
+			}
+			buf = sc->request_buffer;
+
+			/* pretend to be a 1GB disk (partition table contains real stuff): */
+			buf[0] = 0x00;
+			buf[1] = 0x1f;
+			buf[2] = 0xff;
+			buf[3] = 0xff;
+			/* set block size of 512 bytes: */
+			buf[4] = 0;
+			buf[5] = 0;
+			buf[6] = 2;
+			buf[7] = 0;
+			sc->result = GOOD;
+			break;
+
+		      case MODE_SENSE:
+			printk("MODE_SENSE\n");
+			break;
+
+		      case START_STOP:
+			printk("START_STOP\n");
+			break;
+
+		      default:
+			panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]);
+		}
+	}
+	if (sc->result == DID_BAD_TARGET) {
+		sc->result |= DRIVER_SENSE << 24;
+		sc->sense_buffer[0] = 0x70;
+		sc->sense_buffer[2] = 0x00;
+	}
+	if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
+		panic("Attempt to queue command while command is pending!!");
+	}
+	atomic_inc(&num_reqs);
+	queue[wr].sc = sc;
+	wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
+
+	tasklet_schedule(&simscsi_tasklet);
+	return 0;
+}
+
+
+static Scsi_Host_Template driver_template = SIMSCSI;
+
+#define __initcall(fn)	late_initcall(fn)
+
+#include "../drivers/scsi/scsi_module.c"

arch/ia64/hp/simscsi.h

+/*
+ * Simulated SCSI driver.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef SIMSCSI_H
+#define SIMSCSI_H
+
+#define SIMSCSI_REQ_QUEUE_LEN	64
+
+#define DEFAULT_SIMSCSI_ROOT	"/var/ski-disks/sd"
+
+extern int simscsi_detect (Scsi_Host_Template *);
+extern int simscsi_release (struct Scsi_Host *);
+extern const char *simscsi_info (struct Scsi_Host *);
+extern int simscsi_queuecommand (Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+extern int simscsi_abort (Scsi_Cmnd *);
+extern int simscsi_reset (Scsi_Cmnd *, unsigned int);
+extern int simscsi_biosparam (Disk *, kdev_t, int[]);
+
+#define SIMSCSI {					\
+	detect:			simscsi_detect,		\
+	release:		simscsi_release,	\
+	info:			simscsi_info,		\
+	queuecommand:		simscsi_queuecommand,	\
+	abort:			simscsi_abort,		\
+	reset:			simscsi_reset,		\
+	bios_param:		simscsi_biosparam,	\
+	can_queue:		SIMSCSI_REQ_QUEUE_LEN,	\
+	this_id:		-1,			\
+	sg_tablesize:		SG_ALL,			\
+	cmd_per_lun:		SIMSCSI_REQ_QUEUE_LEN,	\
+	present:		0,			\
+	unchecked_isa_dma:	0,			\
+	use_clustering:		DISABLE_CLUSTERING	\
+}
+
+#endif /* SIMSCSI_H */

arch/ia64/hp/simserial.c

+/*
+ * Simulated Serial Driver (fake serial)
+ *
+ * This driver is mostly used for bringup purposes and will go away.
+ * It has a strong dependency on the system console. All outputs
+ * are rerouted to the same facility as the one used by printk which, in our
+ * case means sys_sim.c console (goes via the simulator). The code hereafter
+ * is completely leveraged from the serial.c driver.
+ *
+ * Copyright (C) 1999-2000 Hewlett-Packard Co
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/04/00 D. Mosberger	Merged in serial.c bug fixes in rs_close().
+ * 02/25/00 D. Mosberger	Synced up with 2.3.99pre-5 version of serial.c.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/malloc.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_KDB
+# include <linux/kdb.h>
+#endif
+
+#undef SIMSERIAL_DEBUG	/* define this to get some debug information */
+
+#define KEYBOARD_INTR	3	/* must match with simulator! */
+
+#define NR_PORTS	1	/* only one port for now */
+#define SERIAL_INLINE	1
+
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
+#ifndef MIN
+#define MIN(a,b)	((a) < (b) ? (a) : (b))
+#endif
+
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+
+#define SSC_GETCHAR	21
+
+extern long ia64_ssc (long, long, long, long, int);
+extern void ia64_ssc_connect_irq (long intr, long irq);
+
+static char *serial_name = "SimSerial driver";
+static char *serial_version = "0.6";
+
+/*
+ * This has been extracted from asm/serial.h. We need one eventually but
+ * I don't know exactly what we're going to put in it so just fake one
+ * for now.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+/*
+ * Most of the values here are meaningless to this particular driver.
+ * However some values must be preserved for the code (leveraged from serial.c
+ * to work correctly).
+ * port must not be 0
+ * type must not be UNKNOWN
+ * So I picked arbitrary (guess from where?) values instead
+ */
+static struct serial_state rs_table[NR_PORTS]={
+  /* UART CLK   PORT IRQ     FLAGS        */
+  { 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 }  /* ttyS0 */
+};
+
+/*
+ * Just for the fun of it !
+ */
+static struct serial_uart_config uart_config[] = {
+	{ "unknown", 1, 0 },
+	{ "8250", 1, 0 },
+	{ "16450", 1, 0 },
+	{ "16550", 1, 0 },
+	{ "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
+	{ "cirrus", 1, 0 },
+	{ "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
+	{ "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
+		  UART_STARTECH },
+	{ "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
+	{ 0, 0}
+};
+
+static struct tty_driver serial_driver, callout_driver;
+static int serial_refcount;
+
+static struct async_struct *IRQ_ports[NR_IRQS];
+static struct tty_struct *serial_table[NR_PORTS];
+static struct termios *serial_termios[NR_PORTS];
+static struct termios *serial_termios_locked[NR_PORTS];
+
+static struct console *console;
+
+static unsigned char *tmp_buf;
+static DECLARE_MUTEX(tmp_buf_sem);
+
+extern struct console *console_drivers; /* from kernel/printk.c */
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_stop(struct tty_struct *tty)
+{
+#ifdef SIMSERIAL_DEBUG
+	printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
+		tty->stopped, tty->hw_stopped, tty->flow_stopped);
+#endif
+
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+#if SIMSERIAL_DEBUG
+	printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
+		tty->stopped, tty->hw_stopped, tty->flow_stopped);
+#endif
+}
+
+static  void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
+{
+	unsigned char ch;
+	static unsigned char seen_esc = 0;
+
+	while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
+		if ( ch == 27 && seen_esc == 0 ) {
+			seen_esc = 1;
+			continue;
+		} else {
+			if ( seen_esc==1 && ch == 'O' ) {
+				seen_esc = 2;
+				continue;
+			} else if ( seen_esc == 2 ) {
+				if ( ch == 'P' ) show_state();		/* F1 key */
+				if ( ch == 'Q' ) show_buffers();	/* F2 key */
+#ifdef CONFIG_KDB
+				if ( ch == 'S' )
+					kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+#endif
+
+				seen_esc = 0;
+				continue;
+			}
+		}
+		seen_esc = 0;
+		if (tty->flip.count >= TTY_FLIPBUF_SIZE) break;
+
+		*tty->flip.char_buf_ptr = ch;
+
+		*tty->flip.flag_buf_ptr = 0;
+
+		tty->flip.flag_buf_ptr++;
+		tty->flip.char_buf_ptr++;
+		tty->flip.count++;
+	}
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ * This is the serial driver's interrupt routine for a single port
+ */
+static void rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
+{
+	struct async_struct * info;
+
+	/*
+	 * I don't know exactly why they don't use the dev_id opaque data
+	 * pointer instead of this extra lookup table
+	 */
+	info = IRQ_ports[irq];
+	if (!info || !info->tty) {
+		printk("simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
+		return;
+	}
+	/*
+	 * pretty simple in our case, because we only get interrupts
+	 * on inbound traffic
+	 */
+	receive_chars(info->tty, regs);
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+#if 0
+/*
+ * not really used in our situation so keep them commented out for now
+ */
+static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
+static void do_serial_bh(void)
+{
+	run_task_queue(&tq_serial);
+	printk("do_serial_bh: called\n");
+}
+#endif
+
+static void do_softint(void *private_)
+{
+	printk("simserial: do_softint called\n");
+}
+
+static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	unsigned long flags;
+
+	if (!tty || !info->xmit.buf) return;
+
+	save_flags(flags); cli();
+	if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
+		restore_flags(flags);
+		return;
+	}
+	info->xmit.buf[info->xmit.head] = ch;
+	info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
+	restore_flags(flags);
+}
+
+static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
+{
+	int count;
+	unsigned long flags;
+
+	save_flags(flags); cli();
+
+	if (info->x_char) {
+		char c = info->x_char;
+
+		console->write(console, &c, 1);
+
+		info->state->icount.tx++;
+		info->x_char = 0;
+
+		goto out;
+	}
+
+	if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) {
+#ifdef SIMSERIAL_DEBUG
+		printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
+		       info->xmit.head, info->xmit.tail, info->tty->stopped);
+#endif
+		goto out;
+	}
+	/*
+	 * We removed the loop and try to do it in to chunks. We need
+	 * 2 operations maximum because it's a ring buffer.
+	 *
+	 * First from current to tail if possible.
+	 * Then from the beginning of the buffer until necessary
+	 */
+
+	count = MIN(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
+		    SERIAL_XMIT_SIZE - info->xmit.tail);
+	console->write(console, info->xmit.buf+info->xmit.tail, count);
+
+	info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
+
+	/*
+	 * We have more at the beginning of the buffer
+	 */
+	count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+	if (count) {
+		console->write(console, info->xmit.buf, count);
+		info->xmit.tail += count;
+	}
+out:
+	restore_flags(flags);
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+	if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped ||
+	    !info->xmit.buf)
+		return;
+
+	transmit_chars(info, NULL);
+}
+
+
+static int rs_write(struct tty_struct * tty, int from_user,
+		    const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	unsigned long flags;
+
+	if (!tty || !info->xmit.buf || !tmp_buf) return 0;
+
+	save_flags(flags);
+	if (from_user) {
+		down(&tmp_buf_sem);
+		while (1) {
+			int c1;
+			c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+			if (count < c)
+				c = count;
+			if (c <= 0)
+				break;
+
+			c -= copy_from_user(tmp_buf, buf, c);
+			if (!c) {
+				if (!ret)
+					ret = -EFAULT;
+				break;
+			}
+			cli();
+			c1 = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+			if (c1 < c)
+				c = c1;
+			memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
+			info->xmit.head = ((info->xmit.head + c) &
+					   (SERIAL_XMIT_SIZE-1));
+			restore_flags(flags);
+			buf += c;
+			count -= c;
+			ret += c;
+		}
+		up(&tmp_buf_sem);
+	} else {
+		cli();
+		while (1) {
+			c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+			if (count < c)
+				c = count;
+			if (c <= 0) {
+				break;
+			}
+			memcpy(info->xmit.buf + info->xmit.head, buf, c);
+			info->xmit.head = ((info->xmit.head + c) &
+					   (SERIAL_XMIT_SIZE-1));
+			buf += c;
+			count -= c;
+			ret += c;
+		}
+		restore_flags(flags);
+	}
+	/*
+	 * Hey, we transmit directly from here in our case
+	 */
+	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE)
+	    && !tty->stopped && !tty->hw_stopped) {
+		transmit_chars(info, NULL);
+	}
+	return ret;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	unsigned long flags;
+
+	save_flags(flags); cli();
+	info->xmit.head = info->xmit.tail = 0;
+	restore_flags(flags);
+
+	wake_up_interruptible(&tty->write_wait);
+
+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+	    tty->ldisc.write_wakeup)
+		(tty->ldisc.write_wakeup)(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+	info->x_char = ch;
+	if (ch) {
+		/*
+		 * I guess we could call console->write() directly but
+		 * let's do that for now.
+		 */
+		transmit_chars(info, NULL);
+	}
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+	if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty));
+
+	printk("simrs_throttle called\n");
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+	struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			rs_send_xchar(tty, START_CHAR(tty));
+	}
+	printk("simrs_unthrottle called\n");
+}
+
+/*
+ * rs_break() --- routine which turns the break handling on or off
+ */
+static void rs_break(struct tty_struct *tty, int break_state)
+{
+}
+
+static int rs_ioctl(struct tty_struct *tty, struct file * file,
+		    unsigned int cmd, unsigned long arg)
+{
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+		case TIOCMGET:
+			printk("rs_ioctl: TIOCMGET called\n");
+			return -EINVAL;
+		case TIOCMBIS:
+		case TIOCMBIC:
+		case TIOCMSET:
+			printk("rs_ioctl: TIOCMBIS/BIC/SET called\n");
+			return -EINVAL;
+		case TIOCGSERIAL:
+			printk("simrs_ioctl TIOCGSERIAL called\n");
+			return 0;
+		case TIOCSSERIAL:
+			printk("simrs_ioctl TIOCSSERIAL called\n");
+			return 0;
+		case TIOCSERCONFIG:
+			printk("rs_ioctl: TIOCSERCONFIG called\n");
+			return -EINVAL;
+
+		case TIOCSERGETLSR: /* Get line status register */
+			printk("rs_ioctl: TIOCSERGETLSR called\n");
+			return  -EINVAL;
+
+		case TIOCSERGSTRUCT:
+			printk("rs_ioctl: TIOCSERGSTRUCT called\n");
+#if 0
+			if (copy_to_user((struct async_struct *) arg,
+					 info, sizeof(struct async_struct)))
+				return -EFAULT;
+#endif
+			return 0;
+
+		/*
+		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+		 * - mask passed in arg for lines of interest
+		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+		 * Caller should use TIOCGICOUNT to see which one it was
+		 */
+		case TIOCMIWAIT:
+			printk("rs_ioctl: TIOCMIWAIT: called\n");
+			return 0;
+		/*
+		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+		 * Return: write counters to the user passed counter struct
+		 * NB: both 1->0 and 0->1 transitions are counted except for
+		 *     RI where only 0->1 is counted.
+		 */
+		case TIOCGICOUNT:
+			printk("rs_ioctl: TIOCGICOUNT called\n");
+			return 0;
+
+		case TIOCSERGWILD:
+		case TIOCSERSWILD:
+			/* "setserial -W" is called in Debian boot */
+			printk ("TIOCSER?WILD ioctl obsolete, ignored.\n");
+			return 0;
+
+		default:
+			return -ENOIOCTLCMD;
+		}
+	return 0;
+}
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+	unsigned int cflag = tty->termios->c_cflag;
+
+	if (   (cflag == old_termios->c_cflag)
+	    && (   RELEVANT_IFLAG(tty->termios->c_iflag)
+		== RELEVANT_IFLAG(old_termios->c_iflag)))
+	  return;
+
+
+	/* Handle turning off CRTSCTS */
+	if ((old_termios->c_cflag & CRTSCTS) &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		rs_start(tty);
+	}
+}
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct async_struct * info)
+{
+	unsigned long	flags;
+	struct serial_state *state;
+	int		retval;
+
+	if (!(info->flags & ASYNC_INITIALIZED)) return;
+
+	state = info->state;
+
+#ifdef SIMSERIAL_DEBUG
+	printk("Shutting down serial port %d (irq %d)....", info->line,
+	       state->irq);
+#endif
+
+	save_flags(flags); cli(); /* Disable interrupts */
+
+	/*
+	 * First unlink the serial port from the IRQ chain...
+	 */
+	if (info->next_port)
+		info->next_port->prev_port = info->prev_port;
+	if (info->prev_port)
+		info->prev_port->next_port = info->next_port;
+	else
+		IRQ_ports[state->irq] = info->next_port;
+
+	/*
+	 * Free the IRQ, if necessary
+	 */
+	if (state->irq && (!IRQ_ports[state->irq] ||
+			  !IRQ_ports[state->irq]->next_port)) {
+		if (IRQ_ports[state->irq]) {
+			free_irq(state->irq, NULL);
+			retval = request_irq(state->irq, rs_interrupt_single,
+					     IRQ_T(info), "serial", NULL);
+
+			if (retval)
+				printk("serial shutdown: request_irq: error %d"
+				       "  Couldn't reacquire IRQ.\n", retval);
+		} else
+			free_irq(state->irq, NULL);
+	}
+
+	if (info->xmit.buf) {
+		free_page((unsigned long) info->xmit.buf);
+		info->xmit.buf = 0;
+	}
+
+	if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->flags &= ~ASYNC_INITIALIZED;
+	restore_flags(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+	struct async_struct * info = (struct async_struct *)tty->driver_data;
+	struct serial_state *state;
+	unsigned long flags;
+
+	if (!info ) return;
+
+	state = info->state;
+
+	save_flags(flags); cli();
+
+	if (tty_hung_up_p(filp)) {
+#ifdef SIMSERIAL_DEBUG
+		printk("rs_close: hung_up\n");
+#endif
+		MOD_DEC_USE_COUNT;
+		restore_flags(flags);
+		return;
+	}
+#ifdef SIMSERIAL_DEBUG
+	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
+#endif
+	if ((tty->count == 1) && (state->count != 1)) {
+		/*
+		 * Uh, oh.  tty->count is 1, which means that the tty
+		 * structure will be freed.  state->count should always
+		 * be one in these conditions.  If it's greater than
+		 * one, we've got real problems, since it means the
+		 * serial port won't be shutdown.
+		 */
+		printk("rs_close: bad serial port count; tty->count is 1, "
+		       "state->count is %d\n", state->count);
+		state->count = 1;
+	}
+	if (--state->count < 0) {
+		printk("rs_close: bad serial port count for ttys%d: %d\n",
+		       info->line, state->count);
+		state->count = 0;
+	}
+	if (state->count) {
+		MOD_DEC_USE_COUNT;
+		restore_flags(flags);
+		return;
+	}
+	info->flags |= ASYNC_CLOSING;
+	restore_flags(flags);
+
+	/*
+	 * Now we wait for the transmit buffer to clear; and we notify
+	 * the line discipline to only process XON/XOFF characters.
+	 */
+	shutdown(info);
+	if (tty->driver.flush_buffer) tty->driver.flush_buffer(tty);
+	if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+	info->event = 0;
+	info->tty = 0;
+	if (info->blocked_open) {
+		if (info->close_delay) {
+			current->state = TASK_INTERRUPTIBLE;
+			schedule_timeout(info->close_delay);
+		}
+		wake_up_interruptible(&info->open_wait);
+	}
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&info->close_wait);
+	MOD_DEC_USE_COUNT;
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+}
+
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rs_hangup(struct tty_struct *tty)
+{
+	struct async_struct * info = (struct async_struct *)tty->driver_data;
+	struct serial_state *state = info->state;
+
+#ifdef SIMSERIAL_DEBUG
+	printk("rs_hangup: called\n");
+#endif
+
+	state = info->state;
+
+	rs_flush_buffer(tty);
+	if (info->flags & ASYNC_CLOSING)
+		return;
+	shutdown(info);
+
+	info->event = 0;
+	state->count = 0;
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
+	info->tty = 0;
+	wake_up_interruptible(&info->open_wait);
+}
+
+
+static int get_async_struct(int line, struct async_struct **ret_info)
+{
+	struct async_struct *info;
+	struct serial_state *sstate;
+
+	sstate = rs_table + line;
+	sstate->count++;
+	if (sstate->info) {
+		*ret_info = sstate->info;
+		return 0;
+	}
+	info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
+	if (!info) {
+		sstate->count--;
+		return -ENOMEM;
+	}
+	memset(info, 0, sizeof(struct async_struct));
+	init_waitqueue_head(&info->open_wait);
+	init_waitqueue_head(&info->close_wait);
+	init_waitqueue_head(&info->delta_msr_wait);
+	info->magic = SERIAL_MAGIC;
+	info->port = sstate->port;
+	info->flags = sstate->flags;
+	info->xmit_fifo_size = sstate->xmit_fifo_size;
+	info->line = line;
+	info->tqueue.routine = do_softint;
+	info->tqueue.data = info;
+	info->state = sstate;
+	if (sstate->info) {
+		kfree(info);
+		*ret_info = sstate->info;
+		return 0;
+	}
+	*ret_info = sstate->info = info;
+	return 0;
+}
+
+static int
+startup(struct async_struct *info)
+{
+	unsigned long flags;
+	int	retval=0;
+	void (*handler)(int, void *, struct pt_regs *);
+	struct serial_state *state= info->state;
+	unsigned long page;
+
+	page = get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	save_flags(flags); cli();
+
+	if (info->flags & ASYNC_INITIALIZED) {
+		free_page(page);
+		goto errout;
+	}
+
+	if (!state->port || !state->type) {
+		if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+		free_page(page);
+		goto errout;
+	}
+	if (info->xmit.buf)
+		free_page(page);
+	else
+		info->xmit.buf = (unsigned char *) page;
+
+#ifdef SIMSERIAL_DEBUG
+	printk("startup: ttys%d (irq %d)...", info->line, state->irq);
+#endif
+
+	/*
+	 * Allocate the IRQ if necessary
+	 */
+	if (state->irq && (!IRQ_ports[state->irq] ||
+			  !IRQ_ports[state->irq]->next_port)) {
+		if (IRQ_ports[state->irq]) {
+			retval = -EBUSY;
+			goto errout;
+		} else
+			handler = rs_interrupt_single;
+
+		retval = request_irq(state->irq, handler, IRQ_T(info),
+				     "simserial", NULL);
+		if (retval) {
+			if (capable(CAP_SYS_ADMIN)) {
+				if (info->tty)
+					set_bit(TTY_IO_ERROR,
+						&info->tty->flags);
+				retval = 0;
+			}
+			goto errout;
+		}
+	}
+
+	/*
+	 * Insert serial port into IRQ chain.
+	 */
+	info->prev_port = 0;
+	info->next_port = IRQ_ports[state->irq];
+	if (info->next_port)
+		info->next_port->prev_port = info;
+	IRQ_ports[state->irq] = info;
+
+	if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->xmit.head = info->xmit.tail = 0;
+
+#if 0
+	/*
+	 * Set up serial timers...
+	 */
+	timer_table[RS_TIMER].expires = jiffies + 2*HZ/100;
+	timer_active |= 1 << RS_TIMER;
+#endif
+
+	/*
+	 * Set up the tty->alt_speed kludge
+	 */
+	if (info->tty) {
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+			info->tty->alt_speed = 57600;
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+			info->tty->alt_speed = 115200;
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+			info->tty->alt_speed = 230400;
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+			info->tty->alt_speed = 460800;
+	}
+
+	info->flags |= ASYNC_INITIALIZED;
+	restore_flags(flags);
+	return 0;
+
+errout:
+	restore_flags(flags);
+	return retval;
+}
+
+
+/*
+ * This routine is called whenever a serial port is opened.  It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain.   It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+	struct async_struct	*info;
+	int			retval, line;
+	unsigned long		page;
+
+	MOD_INC_USE_COUNT;
+	line = minor(tty->device) - tty->driver.minor_start;
+	if ((line < 0) || (line >= NR_PORTS)) {
+		MOD_DEC_USE_COUNT;
+		return -ENODEV;
+	}
+	retval = get_async_struct(line, &info);
+	if (retval) {
+		MOD_DEC_USE_COUNT;
+		return retval;
+	}
+	tty->driver_data = info;
+	info->tty = tty;
+
+#ifdef SIMSERIAL_DEBUG
+	printk("rs_open %s%d, count = %d\n", tty->driver.name, info->line,
+	       info->state->count);
+#endif
+	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	if (!tmp_buf) {
+		page = get_free_page(GFP_KERNEL);
+		if (!page) {
+			/* MOD_DEC_USE_COUNT; "info->tty" will cause this? */
+			return -ENOMEM;
+		}
+		if (tmp_buf)
+			free_page(page);
+		else
+			tmp_buf = (unsigned char *) page;
+	}
+
+	/*
+	 * If the port is the middle of closing, bail out now
+	 */
+	if (tty_hung_up_p(filp) ||
+	    (info->flags & ASYNC_CLOSING)) {
+		if (info->flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->close_wait);
+		/* MOD_DEC_USE_COUNT; "info->tty" will cause this? */
+#ifdef SERIAL_DO_RESTART
+		return ((info->flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+#else
+		return -EAGAIN;
+#endif
+	}
+
+	/*
+	 * Start up serial port
+	 */
+	retval = startup(info);
+	if (retval) {
+		/* MOD_DEC_USE_COUNT; "info->tty" will cause this? */
+		return retval;
+	}
+
+	if ((info->state->count == 1) &&
+	    (info->flags & ASYNC_SPLIT_TERMIOS)) {
+		if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
+			*tty->termios = info->state->normal_termios;
+		else
+			*tty->termios = info->state->callout_termios;
+	}
+
+	/*
+	 * figure out which console to use (should be one already)
+	 */
+	console = console_drivers;
+	while (console) {
+		if ((console->flags & CON_ENABLED) && console->write) break;
+		console = console->next;
+	}
+
+	info->session = current->session;
+	info->pgrp = current->pgrp;
+
+#ifdef SIMSERIAL_DEBUG
+	printk("rs_open ttys%d successful\n", info->line);
+#endif
+	return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, struct serial_state *state)
+{
+	return sprintf(buf, "%d: uart:%s port:%lX irq:%d\n",
+		       state->line, uart_config[state->type].name,
+		       state->port, state->irq);
+}
+
+static int rs_read_proc(char *page, char **start, off_t off, int count,
+		 int *eof, void *data)
+{
+	int i, len = 0, l;
+	off_t	begin = 0;
+
+	len += sprintf(page, "simserinfo:1.0 driver:%s\n", serial_version);
+	for (i = 0; i < NR_PORTS && len < 4000; i++) {
+		l = line_info(page + len, &rs_table[i]);
+		len += l;
+		if (len+begin > off+count)
+			goto done;
+		if (len+begin < off) {
+			begin += len;
+			len = 0;
+		}
+	}
+	*eof = 1;
+done:
+	if (off >= len+begin)
+		return 0;
+	*start = page + (begin-off);
+	return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ * rs_init() and friends
+ *
+ * rs_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+/*
+ * This routine prints out the appropriate serial driver version
+ * number, and identifies which options were configured into this
+ * driver.
+ */
+static inline void show_serial_version(void)
+{
+	printk(KERN_INFO "%s version %s with", serial_name, serial_version);
+	printk(" no serial options enabled\n");
+}
+
+/*
+ * The serial driver boot-time initialization code!
+ */
+static int __init
+simrs_init (void)
+{
+	int			i;
+	struct serial_state	*state;
+
+	show_serial_version();
+
+	/* Initialize the tty_driver structure */
+
+	memset(&serial_driver, 0, sizeof(struct tty_driver));
+	serial_driver.magic = TTY_DRIVER_MAGIC;
+	serial_driver.driver_name = "simserial";
+	serial_driver.name = "ttyS";
+	serial_driver.major = TTY_MAJOR;
+	serial_driver.minor_start = 64;
+	serial_driver.num = 1;
+	serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver.subtype = SERIAL_TYPE_NORMAL;
+	serial_driver.init_termios = tty_std_termios;
+	serial_driver.init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver.flags = TTY_DRIVER_REAL_RAW;
+	serial_driver.refcount = &serial_refcount;
+	serial_driver.table = serial_table;
+	serial_driver.termios = serial_termios;
+	serial_driver.termios_locked = serial_termios_locked;
+
+	serial_driver.open = rs_open;
+	serial_driver.close = rs_close;
+	serial_driver.write = rs_write;
+	serial_driver.put_char = rs_put_char;
+	serial_driver.flush_chars = rs_flush_chars;
+	serial_driver.write_room = rs_write_room;
+	serial_driver.chars_in_buffer = rs_chars_in_buffer;
+	serial_driver.flush_buffer = rs_flush_buffer;
+	serial_driver.ioctl = rs_ioctl;
+	serial_driver.throttle = rs_throttle;
+	serial_driver.unthrottle = rs_unthrottle;
+	serial_driver.send_xchar = rs_send_xchar;
+	serial_driver.set_termios = rs_set_termios;
+	serial_driver.stop = rs_stop;
+	serial_driver.start = rs_start;
+	serial_driver.hangup = rs_hangup;
+	serial_driver.break_ctl = rs_break;
+	serial_driver.wait_until_sent = rs_wait_until_sent;
+	serial_driver.read_proc = rs_read_proc;
+
+	/*
+	 * Let's have a little bit of fun !
+	 */
+	for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
+
+		if (state->type == PORT_UNKNOWN) continue;
+
+		if (!state->irq) {
+			state->irq = ia64_alloc_irq();
+			ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
+		}
+
+		printk(KERN_INFO "ttyS%02d at 0x%04lx (irq = %d) is a %s\n",
+		       state->line,
+		       state->port, state->irq,
+		       uart_config[state->type].name);
+	}
+	/*
+	 * The callout device is just like normal device except for
+	 * major number and the subtype code.
+	 */
+	callout_driver = serial_driver;
+	callout_driver.name = "cua";
+	callout_driver.major = TTYAUX_MAJOR;
+	callout_driver.subtype = SERIAL_TYPE_CALLOUT;
+	callout_driver.read_proc = 0;
+	callout_driver.proc_entry = 0;
+
+	if (tty_register_driver(&serial_driver))
+		panic("Couldn't register simserial driver\n");
+
+	if (tty_register_driver(&callout_driver))
+		panic("Couldn't register callout driver\n");
+
+	return 0;
+}
+
+#ifndef MODULE
+__initcall(simrs_init);
+#endif

arch/ia64/kernel/smp.c

@@ -98,7 +98,7 @@ void
 handle_IPI (int irq, void *dev_id, struct pt_regs *regs)
 {
 	int this_cpu = smp_processor_id();
-	unsigned long *pending_ipis = &ipi_operation;
+	unsigned long *pending_ipis = &this_cpu(ipi_operation);
 	unsigned long ops;
 
 	/* Count this now; we may make a call that never returns. */
@@ -158,7 +158,7 @@ handle_IPI (int irq, void *dev_id, struct pt_regs *regs)
 static inline void
 send_IPI_single (int dest_cpu, int op)
 {
-	set_bit(op, &ipi_operation);
+	set_bit(op, &per_cpu(ipi_operation, dest_cpu));
 	platform_send_ipi(dest_cpu, IA64_IPI_VECTOR, IA64_IPI_DM_INT, 0);
 }
 

arch/ia64/kernel/unaligned.c

@@ -1305,11 +1305,7 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 	 * handler into reading an arbitrary kernel addresses...
 	 */
 	if (!user_mode(regs)) {
-#ifdef GAS_HAS_LOCAL_TAGS
-		fix = search_exception_table(regs->cr_iip + ia64_psr(regs)->ri);
-#else
-		fix = search_exception_table(regs->cr_iip);
-#endif
+		fix = SEARCH_EXCEPTION_TABLE(regs);
 	}
 	if (user_mode(regs) || fix.cont) {
 		if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)

arch/ia64/mm/fault.c

@@ -49,7 +49,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 	int signal = SIGSEGV, code = SEGV_MAPERR;
 	struct vm_area_struct *vma, *prev_vma;
 	struct mm_struct *mm = current->mm;
-	struct exception_fixup fix;
 	struct siginfo si;
 	unsigned long mask;
 
@@ -167,15 +166,8 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 		return;
 	}
 
-#ifdef GAS_HAS_LOCAL_TAGS
-	fix = search_exception_table(regs->cr_iip + ia64_psr(regs)->ri);
-#else
-	fix = search_exception_table(regs->cr_iip);
-#endif
-	if (fix.cont) {
-		handle_exception(regs, fix);
+	if (done_with_exception(regs))
 		return;
-	}
 
 	/*
 	 * Oops. The kernel tried to access some bad page. We'll have to terminate things

arch/ia64/mm/init.c

@@ -445,4 +445,4 @@ mem_init (void)
 #ifdef CONFIG_IA32_SUPPORT
 	ia32_gdt_init();
 #endif
-}
\ No newline at end of file
+}

arch/ia64/vmlinux.lds.S

@@ -66,6 +66,11 @@ SECTIONS
   machvec_end = .;
 #endif
 
+  __start___ksymtab = .;	/* Kernel symbol table */
+  __ksymtab : AT(ADDR(__ksymtab) - PAGE_OFFSET)
+	{ *(__ksymtab) }
+  __stop___ksymtab = .;
+
   /* Unwind info & table: */
   . = ALIGN(8);
   .IA_64.unwind_info : AT(ADDR(.IA_64.unwind_info) - PAGE_OFFSET)

include/asm-ia64/bitops.h

@@ -9,6 +9,8 @@
  *	    scheduler patch
  */
 
+#include <linux/types.h>
+
 #include <asm/system.h>
 
 /**
@@ -97,7 +99,7 @@ clear_bit (int nr, volatile void *addr)
 static __inline__ void
 __clear_bit (int nr, volatile void *addr)
 {
-	volatile __u32 *p = (__u32 *) addr + (nr >> 5);;
+	volatile __u32 *p = (__u32 *) addr + (nr >> 5);
 	__u32 m = 1 << (nr & 31);
 	*p &= ~m;
 }

include/asm-ia64/mman.h

@@ -9,6 +9,7 @@
 #define PROT_READ	0x1		/* page can be read */
 #define PROT_WRITE	0x2		/* page can be written */
 #define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
 #define PROT_NONE	0x0		/* page can not be accessed */
 
 #define MAP_SHARED	0x01		/* Share changes */

include/asm-ia64/system.h

@@ -397,13 +397,17 @@ extern void ia64_load_extra (struct task_struct *task);
 } while (0)
 
 #ifdef CONFIG_SMP
-  /*
-   * In the SMP case, we save the fph state when context-switching
-   * away from a thread that modified fph.  This way, when the thread
-   * gets scheduled on another CPU, the CPU can pick up the state from
-   * task->thread.fph, avoiding the complication of having to fetch
-   * the latest fph state from another CPU.
-   */
+
+/* Return true if this CPU can call the console drivers in printk() */
+#define arch_consoles_callable() (cpu_online_map & (1UL << smp_processor_id()))
+
+/*
+ * In the SMP case, we save the fph state when context-switching
+ * away from a thread that modified fph.  This way, when the thread
+ * gets scheduled on another CPU, the CPU can pick up the state from
+ * task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU.
+ */
 # define switch_to(prev,next) do {						\
 	if (ia64_psr(ia64_task_regs(prev))->mfh) {				\
 		ia64_psr(ia64_task_regs(prev))->mfh = 0;			\

include/asm-ia64/uaccess.h

@@ -320,4 +320,22 @@ struct exception_fixup {
 extern struct exception_fixup search_exception_table (unsigned long addr);
 extern void handle_exception (struct pt_regs *regs, struct exception_fixup fixup);
 
+#ifdef GAS_HAS_LOCAL_TAGS
+#define SEARCH_EXCEPTION_TABLE(regs) search_exception_table(regs->cr_iip + ia64_psr(regs)->ri);
+#else
+#define SEARCH_EXCEPTION_TABLE(regs) search_exception_table(regs->cr_iip);
+#endif
+
+static inline int
+done_with_exception (struct pt_regs *regs)
+{
+	struct exception_fixup fix;
+	fix = SEARCH_EXCEPTION_TABLE(regs);
+	if (fix.cont) {
+		handle_exception(regs, fix);
+		return 1;
+	}
+	return 0;
+}
+
 #endif /* _ASM_IA64_UACCESS_H */