Commit 2bd5bd15 authored by Pierre-Louis Bossart's avatar Pierre-Louis Bossart Committed by Mark Brown

ASoC: Intel: add bytct-rt5651 machine driver

based on bytcr-rt5640 with changes only on codec side
Quirk logic is kept as placeholder.
Signed-off-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent dc901a35
......@@ -103,6 +103,18 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
Say Y if you have such a device
If unsure select "N".
config SND_SOC_INTEL_BYTCR_RT5651_MACH
tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
depends on X86 && I2C
select SND_SOC_RT5651
select SND_SST_MFLD_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
platforms with RT5651 audio codec.
Say Y if you have such a device
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
depends on X86_INTEL_LPSS && I2C
......
......@@ -316,6 +316,9 @@ static int sst_acpi_remove(struct platform_device *pdev)
static struct sst_acpi_mach sst_acpi_bytcr[] = {
{"10EC5640", "bytcr_rt5640", "intel/fw_sst_0f28.bin", "bytcr_rt5640", NULL,
&byt_rvp_platform_data },
{"10EC5651", "bytcr_rt5651", "intel/fw_sst_0f28.bin", "bytcr_rt5651", NULL,
&byt_rvp_platform_data },
{},
};
......
......@@ -3,6 +3,7 @@ snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o
snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o
snd-soc-sst-broadwell-objs := broadwell.o
snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o
snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o
snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o
......@@ -15,6 +16,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o
obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o
obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o
......
/*
* bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform
* (derived from bytcr_rt5640.c)
*
* Copyright (C) 2015 Intel Corp
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include "../../codecs/rt5651.h"
#include "../atom/sst-atom-controls.h"
static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Internal Mic", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
};
static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
{"AIF1 Playback", NULL, "ssp2 Tx"},
{"ssp2 Tx", NULL, "codec_out0"},
{"ssp2 Tx", NULL, "codec_out1"},
{"codec_in0", NULL, "ssp2 Rx"},
{"codec_in1", NULL, "ssp2 Rx"},
{"ssp2 Rx", NULL, "AIF1 Capture"},
{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
{"IN2P", NULL, "Headset Mic"},
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
{"Speaker", NULL, "LOUTL"},
{"Speaker", NULL, "LOUTR"},
};
static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic1_map[] = {
{"DMIC1", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic2_map[] = {
{"DMIC2", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = {
{"Internal Mic", NULL, "micbias1"},
{"IN1P", NULL, "Internal Mic"},
};
enum {
BYT_RT5651_DMIC1_MAP,
BYT_RT5651_DMIC2_MAP,
BYT_RT5651_IN1_MAP,
};
#define BYT_RT5651_MAP(quirk) ((quirk) & 0xff)
#define BYT_RT5651_DMIC_EN BIT(16)
static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC1_MAP |
BYT_RT5651_DMIC_EN;
static const struct snd_kcontrol_new byt_rt5651_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Internal Mic"),
SOC_DAPM_PIN_SWITCH("Speaker"),
};
static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int ret;
snd_soc_dai_set_bclk_ratio(codec_dai, 50);
ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1,
params_rate(params) * 512,
SND_SOC_CLOCK_IN);
if (ret < 0) {
dev_err(rtd->dev, "can't set codec clock %d\n", ret);
return ret;
}
ret = snd_soc_dai_set_pll(codec_dai, 0, RT5651_PLL1_S_BCLK1,
params_rate(params) * 50,
params_rate(params) * 512);
if (ret < 0) {
dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
return ret;
}
return 0;
}
static const struct dmi_system_id byt_rt5651_quirk_table[] = {
{}
};
static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
{
int ret;
struct snd_soc_card *card = runtime->card;
const struct snd_soc_dapm_route *custom_map;
int num_routes;
card->dapm.idle_bias_off = true;
dmi_check_system(byt_rt5651_quirk_table);
switch (BYT_RT5651_MAP(byt_rt5651_quirk)) {
case BYT_RT5651_IN1_MAP:
custom_map = byt_rt5651_intmic_in1_map;
num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map);
break;
case BYT_RT5651_DMIC2_MAP:
custom_map = byt_rt5651_intmic_dmic2_map;
num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic2_map);
break;
default:
custom_map = byt_rt5651_intmic_dmic1_map;
num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic1_map);
}
ret = snd_soc_add_card_controls(card, byt_rt5651_controls,
ARRAY_SIZE(byt_rt5651_controls));
if (ret) {
dev_err(card->dev, "unable to add card controls\n");
return ret;
}
snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
return ret;
}
static const struct snd_soc_pcm_stream byt_rt5651_dai_params = {
.formats = SNDRV_PCM_FMTBIT_S24_LE,
.rate_min = 48000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
};
static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
int ret;
/* The DSP will covert the FE rate to 48k, stereo, 24bits */
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
/* set SSP2 to 24-bit */
params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
/*
* Default mode for SSP configuration is TDM 4 slot, override config
* with explicit setting to I2S 2ch 24-bit. The word length is set with
* dai_set_tdm_slot() since there is no other API exposed
*/
ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_IF |
SND_SOC_DAIFMT_CBS_CFS
);
if (ret < 0) {
dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
return ret;
}
ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
if (ret < 0) {
dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
return ret;
}
return 0;
}
static unsigned int rates_48000[] = {
48000,
};
static struct snd_pcm_hw_constraint_list constraints_48000 = {
.count = ARRAY_SIZE(rates_48000),
.list = rates_48000,
};
static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream)
{
return snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
&constraints_48000);
}
static struct snd_soc_ops byt_rt5651_aif1_ops = {
.startup = byt_rt5651_aif1_startup,
};
static struct snd_soc_ops byt_rt5651_be_ssp2_ops = {
.hw_params = byt_rt5651_aif1_hw_params,
};
static struct snd_soc_dai_link byt_rt5651_dais[] = {
[MERR_DPCM_AUDIO] = {
.name = "Audio Port",
.stream_name = "Audio",
.cpu_dai_name = "media-cpu-dai",
.codec_dai_name = "snd-soc-dummy-dai",
.codec_name = "snd-soc-dummy",
.platform_name = "sst-mfld-platform",
.ignore_suspend = 1,
.nonatomic = true,
.dynamic = 1,
.dpcm_playback = 1,
.dpcm_capture = 1,
.ops = &byt_rt5651_aif1_ops,
},
[MERR_DPCM_DEEP_BUFFER] = {
.name = "Deep-Buffer Audio Port",
.stream_name = "Deep-Buffer Audio",
.cpu_dai_name = "deepbuffer-cpu-dai",
.codec_dai_name = "snd-soc-dummy-dai",
.codec_name = "snd-soc-dummy",
.platform_name = "sst-mfld-platform",
.ignore_suspend = 1,
.nonatomic = true,
.dynamic = 1,
.dpcm_playback = 1,
.ops = &byt_rt5651_aif1_ops,
},
[MERR_DPCM_COMPR] = {
.name = "Compressed Port",
.stream_name = "Compress",
.cpu_dai_name = "compress-cpu-dai",
.codec_dai_name = "snd-soc-dummy-dai",
.codec_name = "snd-soc-dummy",
.platform_name = "sst-mfld-platform",
},
/* CODEC<->CODEC link */
/* back ends */
{
.name = "SSP2-Codec",
.be_id = 1,
.cpu_dai_name = "ssp2-port",
.platform_name = "sst-mfld-platform",
.no_pcm = 1,
.codec_dai_name = "rt5651-aif1",
.codec_name = "i2c-10EC5651:00",
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
| SND_SOC_DAIFMT_CBS_CFS,
.be_hw_params_fixup = byt_rt5651_codec_fixup,
.ignore_suspend = 1,
.nonatomic = true,
.dpcm_playback = 1,
.dpcm_capture = 1,
.init = byt_rt5651_init,
.ops = &byt_rt5651_be_ssp2_ops,
},
};
/* SoC card */
static struct snd_soc_card byt_rt5651_card = {
.name = "bytcr-rt5651",
.owner = THIS_MODULE,
.dai_link = byt_rt5651_dais,
.num_links = ARRAY_SIZE(byt_rt5651_dais),
.dapm_widgets = byt_rt5651_widgets,
.num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets),
.dapm_routes = byt_rt5651_audio_map,
.num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map),
.fully_routed = true,
};
static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
/* register the soc card */
byt_rt5651_card.dev = &pdev->dev;
ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
if (ret_val) {
dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
ret_val);
return ret_val;
}
platform_set_drvdata(pdev, &byt_rt5651_card);
return ret_val;
}
static struct platform_driver snd_byt_rt5651_mc_driver = {
.driver = {
.name = "bytcr_rt5651",
.pm = &snd_soc_pm_ops,
},
.probe = snd_byt_rt5651_mc_probe,
};
module_platform_driver(snd_byt_rt5651_mc_driver);
MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651");
MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:bytcr_rt5651");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment