Merge tag 'drm-vc4-next-2016-08-29' of https://github.com/anholt/linux into drm-next

This pull request brings in interlaced vblank timing and a 3D
rendering memory/CPU overhead reduction.

* tag 'drm-vc4-next-2016-08-29' of https://github.com/anholt/linux:
  drm/vc4: Don't force new binner overflow allocation per draw.
  drm/vc4: Enable/Disable vblanks properly in crtc en/disable.
  drm/vc4: Enable precise vblank timestamping for interlaced modes.
  drm/vc4: Reject doublescan modes.
  drm/vc4: Fix handling of interlaced video modes.
  drm/vc4: Disallow interlaced modes on DPI.

drivers/gpu/drm/vc4/vc4_crtc.c

@@ -163,14 +163,6 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	int vblank_lines;
 	int ret = 0;
 
-	/*
-	 * XXX Doesn't work well in interlaced mode yet, partially due
-	 * to problems in vc4 kms or drm core interlaced mode handling,
-	 * so disable for now in interlaced mode.
-	 */
-	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-		return ret;
-
 	/* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
 
 	/* Get optional system timestamp before query. */
@@ -191,11 +183,16 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 
 	/* Vertical position of hvs composed scanline. */
 	*vpos = VC4_GET_FIELD(val, SCALER_DISPSTATX_LINE);
-
-	/* No hpos info available. */
-	if (hpos)
 	*hpos = 0;
 
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		*vpos /= 2;
+
+		/* Use hpos to correct for field offset in interlaced mode. */
+		if (VC4_GET_FIELD(val, SCALER_DISPSTATX_FRAME_COUNT) % 2)
+			*hpos += mode->crtc_htotal / 2;
+	}
+
 	/* This is the offset we need for translating hvs -> pv scanout pos. */
 	fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay;
 
@@ -217,8 +214,6 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 		 * position of the PV.
 		 */
 		*vpos -= fifo_lines + 1;
-		if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-			*vpos /= 2;
 
 		ret |= DRM_SCANOUTPOS_ACCURATE;
 		return ret;
@@ -480,6 +475,9 @@ static void vc4_crtc_disable(struct drm_crtc *crtc)
 	int ret;
 	require_hvs_enabled(dev);
 
+	/* Disable vblank irq handling before crtc is disabled. */
+	drm_crtc_vblank_off(crtc);
+
 	CRTC_WRITE(PV_V_CONTROL,
 		   CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN);
 	ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1);
@@ -530,6 +528,33 @@ static void vc4_crtc_enable(struct drm_crtc *crtc)
 	/* Turn on the pixel valve, which will emit the vstart signal. */
 	CRTC_WRITE(PV_V_CONTROL,
 		   CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
+
+	/* Enable vblank irq handling after crtc is started. */
+	drm_crtc_vblank_on(crtc);
+}
+
+static bool vc4_crtc_mode_fixup(struct drm_crtc *crtc,
+				const struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	/* Do not allow doublescan modes from user space */
+	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) {
+		DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n",
+			      crtc->base.id);
+		return false;
+	}
+
+	/*
+	 * Interlaced video modes got CRTC_INTERLACE_HALVE_V applied when
+	 * coming from user space. We don't want this, as it screws up
+	 * vblank timestamping, so fix it up.
+	 */
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	DRM_DEBUG_KMS("[CRTC:%d] adjusted_mode :\n", crtc->base.id);
+	drm_mode_debug_printmodeline(adjusted_mode);
+
+	return true;
 }
 
 static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
@@ -819,6 +844,7 @@ static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
 	.mode_set_nofb = vc4_crtc_mode_set_nofb,
 	.disable = vc4_crtc_disable,
 	.enable = vc4_crtc_enable,
+	.mode_fixup = vc4_crtc_mode_fixup,
 	.atomic_check = vc4_crtc_atomic_check,
 	.atomic_flush = vc4_crtc_atomic_flush,
 };

drivers/gpu/drm/vc4/vc4_dpi.c

@@ -340,9 +340,20 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
 	}
 }
 
+static bool vc4_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
+				       const struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return false;
+
+	return true;
+}
+
 static const struct drm_encoder_helper_funcs vc4_dpi_encoder_helper_funcs = {
 	.disable = vc4_dpi_encoder_disable,
 	.enable = vc4_dpi_encoder_enable,
+	.mode_fixup = vc4_dpi_encoder_mode_fixup,
 };
 
 static const struct of_device_id vc4_dpi_dt_match[] = {

drivers/gpu/drm/vc4/vc4_gem.c

@@ -419,10 +419,6 @@ vc4_submit_next_bin_job(struct drm_device *dev)
 
 	vc4_flush_caches(dev);
 
-	/* Disable the binner's pre-loaded overflow memory address */
-	V3D_WRITE(V3D_BPOA, 0);
-	V3D_WRITE(V3D_BPOS, 0);
-
 	/* Either put the job in the binner if it uses the binner, or
 	 * immediately move it to the to-be-rendered queue.
 	 */

drivers/gpu/drm/vc4/vc4_hdmi.c

@@ -208,10 +208,35 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
+/*
+ * drm_helper_probe_single_connector_modes() applies drm_mode_set_crtcinfo to
+ * all modes with flag CRTC_INTERLACE_HALVE_V. We don't want this, as it
+ * screws up vblank timestamping for interlaced modes, so fix it up.
+ */
+static int vc4_hdmi_connector_probe_modes(struct drm_connector *connector,
+					  uint32_t maxX, uint32_t maxY)
+{
+	struct drm_display_mode *mode;
+	int count;
+
+	count = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+	if (count == 0)
+		return 0;
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed adapted modes :\n",
+		      connector->base.id, connector->name);
+	list_for_each_entry(mode, &connector->modes, head) {
+		drm_mode_set_crtcinfo(mode, 0);
+		drm_mode_debug_printmodeline(mode);
+	}
+
+	return count;
+}
+
 static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = vc4_hdmi_connector_detect,
-	.fill_modes = drm_helper_probe_single_connector_modes,
+	.fill_modes = vc4_hdmi_connector_probe_modes,
 	.destroy = vc4_hdmi_connector_destroy,
 	.reset = drm_atomic_helper_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
@@ -246,7 +271,7 @@ static struct drm_connector *vc4_hdmi_connector_init(struct drm_device *dev,
 	connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
 			     DRM_CONNECTOR_POLL_DISCONNECT);
 
-	connector->interlace_allowed = 0;
+	connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
 	drm_mode_connector_attach_encoder(connector, encoder);