Skip to content

L
linux
Commit 2cbe23e3 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge branch 'tegra/cleanups' into next/timer 

Conflicts:
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-vexpress/core.h

The tegra Makefile was changed in four different branches
in the same line. This merge should reduce the amount
of churn.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents b2f1df8d ed1b4acc
Show whitespace changes
Inline Side-by-side
Showing with 972 additions and 2871 deletions
arch/arm/Kconfig
View file @ 2cbe23e3
......@@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
config FIQ
bool
config NEED_RET_TO_USER
bool
config ARCH_MTD_XIP
bool
......@@ -479,6 +482,7 @@ config ARCH_IOP13XX
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
help
Support for Intel's IOP13XX (XScale) family of processors.
......@@ -486,6 +490,7 @@ config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB
......@@ -497,6 +502,7 @@ config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB
......
arch/arm/Kconfig.debug
View file @ 2cbe23e3
......@@ -81,25 +81,6 @@ choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
......@@ -108,20 +89,6 @@ choice
bool "Kernel low-level debugging on 9263, 9g45 and cap9"
depends on HAVE_AT91_DBGU1
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
......@@ -136,6 +103,20 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
......@@ -206,38 +187,42 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
their output to the first serial port on MSM devices.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
their output to the second serial port on MSM devices.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
their output to the serial port on MSM 8660 devices.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
......@@ -255,42 +240,57 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
their output to UART 0. The port must have been initialised
by the boot-loader before use.
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
their output to UART 1. The port must have been initialised
by the boot-loader before use.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
their output to UART 2. The port must have been initialised
by the boot-loader before use.
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
endchoice
......
arch/arm/include/asm/hardware/entry-macro-iomd.S
View file @ 2cbe23e3
......@@ -11,14 +11,6 @@
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
.macro disable_fiq
mov r12, #ioc_base_high
.if ioc_base_low
orr r12, r12, #ioc_base_low
.endif
strb r12, [r12, #0x38] @ Disable FIQ register
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first
ldr \tmp, =irq_prio_h
......
arch/arm/include/asm/system.h
View file @ 2cbe23e3
......@@ -110,6 +110,7 @@ extern void cpu_init(void);
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
extern void (*arm_pm_idle)(void);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
......
arch/arm/kernel/entry-armv.S
View file @ 2cbe23e3
......@@ -19,7 +19,9 @@
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
#ifndef CONFIG_MULTI_IRQ_HANDLER
#include <mach/entry-macro.S>
#endif
#include <asm/thread_notify.h>
#include <asm/unwind.h>
#include <asm/unistd.h>
......@@ -1101,7 +1103,6 @@ __stubs_start:
* get out of that mode without clobbering one register.
*/
vector_fiq:
disable_fiq
subs pc, lr, #4
/*=============================================================================
......
arch/arm/kernel/entry-common.S
View file @ 2cbe23e3
......@@ -10,9 +10,15 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
#include <asm/unwind.h>
#ifdef CONFIG_NEED_RET_TO_USER
#include <mach/entry-macro.S>
#else
.macro arch_ret_to_user, tmp1, tmp2
.endm
#endif
#include "entry-header.S"
......
arch/arm/kernel/process.c
View file @ 2cbe23e3
......@@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void);
static volatile int hlt_counter;
#include <mach/system.h>
void disable_hlt(void)
{
hlt_counter++;
......@@ -181,13 +179,17 @@ void cpu_idle_wait(void)
EXPORT_SYMBOL_GPL(cpu_idle_wait);
/*
* This is our default idle handler. We need to disable
* interrupts here to ensure we don't miss a wakeup call.
* This is our default idle handler.
*/
void (*arm_pm_idle)(void);
static void default_idle(void)
{
if (!need_resched())
arch_idle();
if (arm_pm_idle)
arm_pm_idle();
else
cpu_do_idle();
local_irq_enable();
}
......@@ -215,6 +217,10 @@ void cpu_idle(void)
cpu_die();
#endif
/*
* We need to disable interrupts here
* to ensure we don't miss a wakeup call.
*/
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
......@@ -222,20 +228,19 @@ void cpu_idle(void)
if (hlt_counter) {
local_irq_enable();
cpu_relax();
} else {
} else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
pm_idle();
start_critical_timings();
/*
* This will eventually be removed - pm_idle
* functions should always return with IRQs
* enabled.
* pm_idle functions must always
* return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
} else
local_irq_enable();
}
}
leds_event(led_idle_end);
rcu_idle_exit();
tick_nohz_idle_exit();
......
arch/arm/mach-at91/at91cap9.c
View file @ 2cbe23e3
......@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -313,6 +314,12 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
}
};
static void at91cap9_idle(void)
{
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
cpu_do_idle();
}
/* --------------------------------------------------------------------
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
......@@ -332,6 +339,7 @@ static void __init at91cap9_ioremap_registers(void)
static void __init at91cap9_initialize(void)
{
arm_pm_idle = at91cap9_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
......
arch/arm/mach-at91/at91rm9200.c
View file @ 2cbe23e3
......@@ -289,6 +289,15 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
}
};
static void at91rm9200_idle(void)
{
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
}
static void at91rm9200_restart(char mode, const char *cmd)
{
/*
......@@ -314,6 +323,7 @@ static void __init at91rm9200_ioremap_registers(void)
static void __init at91rm9200_initialize(void)
{
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
......
arch/arm/mach-at91/at91sam9260.c
View file @ 2cbe23e3
......@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -328,8 +329,15 @@ static void __init at91sam9260_ioremap_registers(void)
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
}
static void at91sam9260_idle(void)
{
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
cpu_do_idle();
}
static void __init at91sam9260_initialize(void)
{
arm_pm_idle = at91sam9260_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
......
arch/arm/mach-at91/at91sam9261.c
View file @ 2cbe23e3
......@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -286,8 +287,15 @@ static void __init at91sam9261_ioremap_registers(void)
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
}
static void at91sam9261_idle(void)
{
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
cpu_do_idle();
}
static void __init at91sam9261_initialize(void)
{
arm_pm_idle = at91sam9261_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
......
arch/arm/mach-at91/at91sam9263.c
View file @ 2cbe23e3
......@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -307,8 +308,15 @@ static void __init at91sam9263_ioremap_registers(void)
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
}
static void at91sam9263_idle(void)
{
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
cpu_do_idle();
}
static void __init at91sam9263_initialize(void)
{
arm_pm_idle = at91sam9263_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
......
arch/arm/mach-at91/at91sam9g45.c
View file @ 2cbe23e3
......@@ -317,6 +317,12 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
}
};
static void at91sam9g45_idle(void)
{
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
cpu_do_idle();
}
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
......@@ -337,6 +343,7 @@ static void __init at91sam9g45_ioremap_registers(void)
static void __init at91sam9g45_initialize(void)
{
arm_pm_idle = at91sam9g45_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
......
arch/arm/mach-at91/at91sam9rl.c
View file @ 2cbe23e3
......@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -291,8 +292,15 @@ static void __init at91sam9rl_ioremap_registers(void)
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
}
static void at91sam9rl_idle(void)
{
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
cpu_do_idle();
}
static void __init at91sam9rl_initialize(void)
{
arm_pm_idle = at91sam9rl_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
......
arch/arm/mach-at91/at91x40.c
View file @ 2cbe23e3
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
......@@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk)
return AT91X40_MASTER_CLOCK;
}
static void at91x40_idle(void)
{
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
cpu_do_idle();
}
void __init at91x40_initialize(unsigned long main_clock)
{
arm_pm_idle = at91x40_idle;
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
}
......
arch/arm/mach-at91/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -13,17 +13,11 @@
#include <mach/hardware.h>
#include <mach/at91_aic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
......
arch/arm/mach-at91/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-at91/include/mach/system.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/hardware.h>
#include <mach/at91_st.h>
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
static inline void arch_idle(void)
{
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
#ifdef AT91_PS
at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
#else
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
#endif
#ifndef CONFIG_CPU_ARM920T
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
* Post-RM9200 processors need this in conjunction with the above
* to save power when idle.
*/
cpu_do_idle();
#endif
}
#endif
arch/arm/mach-bcmring/core.c
View file @ 2cbe23e3
......@@ -52,27 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
#define AMBA_DEVICE(name, initname, base, plat, size) \
static struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0, \
.init_name = initname, \
.platform_data = plat \
}, \
.res = { \
.start = MM_ADDR_IO_##base, \
.end = MM_ADDR_IO_##base + (size) - 1, \
.flags = IORESOURCE_MEM \
}, \
.dma_mask = ~0, \
.irq = { \
IRQ_##base \
} \
}
AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
......
arch/arm/mach-bcmring/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -21,9 +21,6 @@
#include <mach/hardware.h>
#include <mach/csp/mm_io.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =(MM_IO_BASE_INTC0)
ldr \irqstat, [\base, #0] @ get status
......@@ -77,6 +74,3 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-bcmring/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-clps711x/common.c
View file @ 2cbe23e3
......@@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd)
{
soft_restart(0);
}
static void clps711x_idle(void)
{
clps_writel(1, HALT);
__asm__ __volatile__(
"mov r0, r0\n\
mov r0, r0");
}
static int __init clps711x_idle_init(void)
{
arm_pm_idle = clps711x_idle;
return 0;
}
arch_initcall(clps711x_idle_init);
arch/arm/mach-clps711x/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -10,15 +10,9 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
#error INTSR stride != INTMR stride
#endif
......
arch/arm/mach-clps711x/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-clps711x/include/mach/system.h
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
static inline void arch_idle(void)
{
clps_writel(1, HALT);
__asm__ __volatile__(
"mov r0, r0\n\
mov r0, r0");
}
#endif
arch/arm/mach-cns3xxx/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* Low-level IRQ helper macros for Cavium Networks platforms
*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-cns3xxx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright 2000 Deep Blue Solutions Ltd
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <asm/proc-fns.h>
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-davinci/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -11,17 +11,11 @@
#include <mach/io.h>
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =davinci_intc_base
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
ldr \tmp, =davinci_intc_type
......
arch/arm/mach-davinci/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* DaVinci system defines
*
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/common.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif /* __ASM_ARCH_SYSTEM_H */
arch/arm/mach-dove/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
......
arch/arm/mach-dove/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-dove/include/mach/system.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-ebsa110/core.c
View file @ 2cbe23e3
......@@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = {
&am79c961_device,
};
/*
* EBSA110 idling methodology:
*
* We can not execute the "wait for interrupt" instruction since that
* will stop our MCLK signal (which provides the clock for the glue
* logic, and therefore the timer interrupt).
*
* Instead, we spin, polling the IRQ_STAT register for the occurrence
* of any interrupt with core clock down to the memory clock.
*/
static void ebsa110_idle(void)
{
const char *irq_stat = (char *)0xff000000;
/* disable clock switching */
asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
/* wait for an interrupt to occur */
while (!*irq_stat);
/* enable clock switching */
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
static int __init ebsa110_init(void)
{
arm_pm_idle = ebsa110_idle;
return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
}
......
arch/arm/mach-ebsa110/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -12,16 +12,10 @@
#define IRQ_STAT 0xff000000 /* read */
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #IRQ_STAT
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, stat, base, tmp
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0
......
arch/arm/mach-ebsa110/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-ebsa110/include/mach/system.h
*
* Copyright (C) 1996-2000 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
/*
* EBSA110 idling methodology:
*
* We can not execute the "wait for interrupt" instruction since that
* will stop our MCLK signal (which provides the clock for the glue
* logic, and therefore the timer interrupt).
*
* Instead, we spin, polling the IRQ_STAT register for the occurrence
* of any interrupt with core clock down to the memory clock.
*/
static inline void arch_idle(void)
{
const char *irq_stat = (char *)0xff000000;
/* disable clock switching */
asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
/* wait for an interrupt to occur */
while (!*irq_stat);
/* enable clock switching */
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
#endif
arch/arm/mach-ep93xx/core.c
View file @ 2cbe23e3
......@@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = {
.set_mctrl = ep93xx_uart_set_mctrl,
};
static struct amba_device uart1_device = {
.dev = {
.init_name = "apb:uart1",
.platform_data = &ep93xx_uart_data,
},
.res = {
.start = EP93XX_UART1_PHYS_BASE,
.end = EP93XX_UART1_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_EP93XX_UART1, NO_IRQ },
.periphid = 0x00041010,
};
static struct amba_device uart2_device = {
.dev = {
.init_name = "apb:uart2",
.platform_data = &ep93xx_uart_data,
},
.res = {
.start = EP93XX_UART2_PHYS_BASE,
.end = EP93XX_UART2_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_EP93XX_UART2, NO_IRQ },
.periphid = 0x00041010,
};
static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
static struct amba_device uart3_device = {
.dev = {
.init_name = "apb:uart3",
.platform_data = &ep93xx_uart_data,
},
.res = {
.start = EP93XX_UART3_PHYS_BASE,
.end = EP93XX_UART3_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_EP93XX_UART3, NO_IRQ },
.periphid = 0x00041010,
};
static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
static struct resource ep93xx_rtc_resource[] = {
{
......
arch/arm/mach-ep93xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-ep93xx/include/mach/entry-macro.S
* IRQ demultiplexing for EP93xx
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-ep93xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-ep93xx/include/mach/system.h
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-exynos/common.c
View file @ 2cbe23e3
......@@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
},
};
static void exynos_idle(void)
{
if (!need_resched())
cpu_do_idle();
local_irq_enable();
}
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
......@@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init);
int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
/* set idle function */
pm_idle = exynos_idle;
return device_register(&exynos4_dev);
}
......
arch/arm/mach-exynos/dma.c
View file @ 2cbe23e3
......@@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = {
.peri_id = pdma0_peri,
};
struct amba_device exynos4_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma0_pdata,
},
.res = {
.start = EXYNOS4_PA_PDMA0,
.end = EXYNOS4_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
{IRQ_PDMA0}, &exynos4_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_PCM0_RX,
......@@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = {
.peri_id = pdma1_peri,
};
struct amba_device exynos4_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma1_pdata,
},
.res = {
.start = EXYNOS4_PA_PDMA1,
.end = EXYNOS4_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
{IRQ_PDMA1}, &exynos4_pdma1_pdata);
static int __init exynos4_dma_init(void)
{
......@@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void)
dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
amba_device_register(&exynos4_device_pdma0, &iomem_resource);
amba_device_register(&exynos4_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
amba_device_register(&exynos4_device_pdma1, &iomem_resource);
amba_device_register(&exynos4_pdma1_device, &iomem_resource);
return 0;
}
......
arch/arm/mach-exynos/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/* arch/arm/mach-exynos4/include/mach/entry-macro.S
*
* Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for EXYNOS4 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-exynos/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-exynos4/include/mach/system.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - system support header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_SYSTEM_H */
arch/arm/mach-footbridge/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -14,9 +14,6 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #dc21285_high
.if dc21285_low
......@@ -24,9 +21,6 @@
.endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #0x180] @ get interrupts
......
arch/arm/mach-footbridge/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-footbridge/include/mach/system.h
*
* Copyright (C) 1996-1999 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-gemini/Makefile
View file @ 2cbe23e3
......@@ -4,7 +4,7 @@
# Object file lists.
obj-y := irq.o mm.o time.o devices.o gpio.o
obj-y := irq.o mm.o time.o devices.o gpio.o idle.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
......
arch/arm/mach-gemini/idle.c 0 → 100644
View file @ 2cbe23e3
/*
* arch/arm/mach-gemini/idle.c
*/
#include <linux/init.h>
#include <asm/system.h>
#include <asm/proc-fns.h>
static void gemini_idle(void)
{
/*
* Because of broken hardware we have to enable interrupts or the CPU
* will never wakeup... Acctualy it is not very good to enable
* interrupts first since scheduler can miss a tick, but there is
* no other way around this. Platforms that needs it for power saving
* should call enable_hlt() in init code, since by default it is
* disabled.
*/
local_irq_enable();
cpu_do_idle();
}
static int __init gemini_idle_init(void)
{
arm_pm_idle = gemini_idle;
return 0;
}
arch_initcall(gemini_idle_init);
arch/arm/mach-gemini/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -12,15 +12,9 @@
#define IRQ_STATUS 0x14
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
ldr \irqnr, [\irqstat]
......
arch/arm/mach-gemini/include/mach/system.h
View file @ 2cbe23e3
......@@ -14,20 +14,6 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
static inline void arch_idle(void)
{
/*
* Because of broken hardware we have to enable interrupts or the CPU
* will never wakeup... Acctualy it is not very good to enable
* interrupts here since scheduler can miss a tick, but there is
* no other way around this. Platforms that needs it for power saving
* should call enable_hlt() in init code, since by default it is
* disabled.
*/
local_irq_enable();
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
......
arch/arm/mach-gemini/irq.c
View file @ 2cbe23e3
......@@ -73,8 +73,8 @@ void __init gemini_init_irq(void)
unsigned int i, mode = 0, level = 0;
/*
* Disable arch_idle() by default since it is buggy
* For more info see arch/arm/mach-gemini/include/mach/system.h
* Disable the idle handler by default since it is buggy
* For more info see arch/arm/mach-gemini/idle.c
*/
disable_hlt();
......
arch/arm/mach-h720x/common.c
View file @ 2cbe23e3
......@@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd)
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
static void h720x__idle(void)
{
CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
nop();
nop();
CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
nop();
nop();
}
static int __init h720x_idle_init(void)
{
arm_pm_idle = h720x__idle;
return 0;
}
arch_initcall(h720x_idle_init);
arch/arm/mach-h720x/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -8,15 +8,9 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
@ we could use the id register on H7202, but this is not
......
arch/arm/mach-h720x/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-h720x/include/mach/system.h
*
* Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* arch/arm/mach-h720x/include/mach/system.h
*
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/hardware.h>
static void arch_idle(void)
{
CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
nop();
nop();
CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
nop();
nop();
}
#endif
arch/arm/mach-highbank/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-highbank/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright 2010-2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-imx/mm-imx3.c
View file @ 2cbe23e3
......@@ -34,7 +34,6 @@ static void imx3_idle(void)
{
unsigned long reg = 0;
if (!need_resched())
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
......@@ -58,7 +57,6 @@ static void imx3_idle(void)
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
local_irq_enable();
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
......@@ -134,8 +132,8 @@ void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
arm_pm_idle = imx3_idle;
}
void __init mx31_init_irq(void)
......@@ -197,7 +195,7 @@ void __init imx35_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
pm_idle = imx3_idle;
arm_pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
......
arch/arm/mach-imx/mm-imx5.c
View file @ 2cbe23e3
......@@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk;
static void imx5_idle(void)
{
if (!need_resched()) {
/* gpc clock is needed for SRPG */
if (gpc_dvfs_clk == NULL) {
gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
if (IS_ERR(gpc_dvfs_clk))
goto err0;
return;
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (tzic_enable_wake())
goto err1;
if (tzic_enable_wake() != 0)
cpu_do_idle();
err1:
clk_disable(gpc_dvfs_clk);
}
err0:
local_irq_enable();
}
/*
......@@ -108,7 +102,7 @@ void __init imx51_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
pm_idle = imx5_idle;
arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
......
arch/arm/mach-imx/pm-imx27.c
View file @ 2cbe23e3
......@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
#include <mach/system.h>
#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
......@@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state)
cscr &= 0xFFFFFFFC;
__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
/* Executes WFI */
arch_idle();
cpu_do_idle();
break;
default:
......
arch/arm/mach-integrator/core.c
View file @ 2cbe23e3
......@@ -35,67 +35,23 @@
static struct amba_pl010_data integrator_uart_data;
static struct amba_device rtc_device = {
.dev = {
.init_name = "mb:15",
},
.res = {
.start = INTEGRATOR_RTC_BASE,
.end = INTEGRATOR_RTC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_RTCINT, NO_IRQ },
};
#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
#define KMI0_IRQ { IRQ_KMIINT0 }
#define KMI1_IRQ { IRQ_KMIINT1 }
static struct amba_device uart0_device = {
.dev = {
.init_name = "mb:16",
.platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART0_BASE,
.end = INTEGRATOR_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT0, NO_IRQ },
};
static AMBA_APB_DEVICE(rtc, "mb:15", 0,
INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
static struct amba_device uart1_device = {
.dev = {
.init_name = "mb:17",
.platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART1_BASE,
.end = INTEGRATOR_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT1, NO_IRQ },
};
static AMBA_APB_DEVICE(uart0, "mb:16", 0,
INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
static struct amba_device kmi0_device = {
.dev = {
.init_name = "mb:18",
},
.res = {
.start = KMI0_BASE,
.end = KMI0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT0, NO_IRQ },
};
static AMBA_APB_DEVICE(uart1, "mb:17", 0,
INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
static struct amba_device kmi1_device = {
.dev = {
.init_name = "mb:19",
},
.res = {
.start = KMI1_BASE,
.end = KMI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT1, NO_IRQ },
};
static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
......
arch/arm/mach-integrator/impd1.c
View file @ 2cbe23e3
......@@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev)
pc_base = dev->resource.start + idev->offset;
d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
d = amba_device_alloc(NULL, pc_base, SZ_4K);
if (!d)
continue;
dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->dev.parent = &dev->dev;
d->res.start = dev->resource.start + idev->offset;
d->res.end = d->res.start + SZ_4K - 1;
d->res.flags = IORESOURCE_MEM;
d->irq[0] = dev->irq;
d->irq[1] = dev->irq;
d->periphid = idev->id;
d->dev.platform_data = idev->platform_data;
ret = amba_device_register(d, &dev->resource);
ret = amba_device_add(d, &dev->resource);
if (ret) {
dev_err(&d->dev, "unable to register device: %d\n", ret);
kfree(d);
amba_device_put(d);
}
}
......
arch/arm/mach-integrator/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -11,15 +11,9 @@
#include <mach/platform.h>
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* FIXME: should not be using soo many LDRs here */
ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
......
arch/arm/mach-integrator/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-integrator/include/mach/system.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-integrator/integrator_cp.c
View file @ 2cbe23e3
......@@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = {
.gpio_cd = -1,
};
static struct amba_device mmc_device = {
.dev = {
.init_name = "mb:1c",
.platform_data = &mmc_data,
},
.res = {
.start = INTEGRATOR_CP_MMC_BASE,
.end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
.periphid = 0,
};
#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
static struct amba_device aaci_device = {
.dev = {
.init_name = "mb:1d",
},
.res = {
.start = INTEGRATOR_CP_AACI_BASE,
.end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_CP_AACIINT, NO_IRQ },
.periphid = 0,
};
static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
INTEGRATOR_CP_MMC_IRQS, &mmc_data);
static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
INTEGRATOR_CP_AACI_IRQS, NULL);
/*
......@@ -425,21 +407,8 @@ static struct clcd_board clcd_data = {
.remove = versatile_clcd_remove_dma,
};
static struct amba_device clcd_device = {
.dev = {
.init_name = "mb:c0",
.coherent_dma_mask = ~0,
.platform_data = &clcd_data,
},
.res = {
.start = INTCP_PA_CLCD_BASE,
.end = INTCP_PA_CLCD_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.dma_mask = ~0,
.irq = { IRQ_CP_CLCDCINT, NO_IRQ },
.periphid = 0,
};
static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
{ IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
......
arch/arm/mach-iop13xx/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -16,9 +16,6 @@
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)
......
arch/arm/mach-iop13xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-iop13xx/include/mach/system.h
*
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-iop32x/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -9,9 +9,6 @@
*/
#include <mach/iop32x.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)
......
arch/arm/mach-iop32x/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-iop32x/include/mach/system.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-iop33x/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -9,9 +9,6 @@
*/
#include <mach/iop33x.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)
......
arch/arm/mach-iop33x/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-iop33x/include/mach/system.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-ixp2000/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -9,15 +9,9 @@
*/
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0x0 @clear out irqnr as default
......
arch/arm/mach-ixp2000/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-ixp2000/include/mach/system.h
*
* Copyright (C) 2002 Intel Corp.
* Copyricht (C) 2003-2005 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-ixp23xx/core.c
View file @ 2cbe23e3
......@@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = {
void __init ixp23xx_sys_init(void)
{
/* by default, the idle code is disabled */
disable_hlt();
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
......
arch/arm/mach-ixp23xx/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -2,15 +2,9 @@
* arch/arm/mach-ixp23xx/include/mach/entry-macro.S
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
ldr \irqnr, [\irqnr] @ get interrupt number
......
arch/arm/mach-ixp23xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-ixp23xx/include/mach/system.h
*
* Copyright (C) 2003 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
#if 0
if (!hlt_counter)
cpu_do_idle();
#endif
}
arch/arm/mach-ixp4xx/common.c
View file @ 2cbe23e3
......@@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void)
{
int i = 0;
/*
* ixp4xx does not implement the XScale PWRMODE register
* so it must not call cpu_do_idle().
*/
disable_hlt();
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
......
arch/arm/mach-ixp4xx/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -9,15 +9,9 @@
*/
#include <mach/hardware.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts
......
arch/arm/mach-ixp4xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-ixp4xx/include/mach/system.h
*
* Copyright (C) 2002 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
static inline void arch_idle(void)
{
/* ixp4xx does not implement the XScale PWRMODE register,
* so it must not call cpu_do_idle() here.
*/
#if 0
cpu_do_idle();
#endif
}
arch/arm/mach-kirkwood/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
......
arch/arm/mach-kirkwood/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-kirkwood/include/mach/system.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-ks8695/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -14,16 +14,10 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
......
arch/arm/mach-ks8695/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-s3c2410/include/mach/system.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* KS8695 - System function defines and includes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks,
*/
cpu_do_idle();
}
#endif
arch/arm/mach-lpc32xx/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -21,16 +21,10 @@
#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* Return IRQ number in irqnr. Also return processor Z flag status in CPSR
* as set if an interrupt is pending.
......
arch/arm/mach-lpc32xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-lpc32xx/include/mach/system.h
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-lpc32xx/phy3250.c
View file @ 2cbe23e3
......@@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = {
.remove = lpc32xx_clcd_remove,
};
static struct amba_device lpc32xx_clcd_device = {
.dev = {
.coherent_dma_mask = ~0,
.init_name = "dev:clcd",
.platform_data = &lpc32xx_clcd_data,
},
.res = {
.start = LPC32XX_LCD_BASE,
.end = (LPC32XX_LCD_BASE + SZ_4K - 1),
.flags = IORESOURCE_MEM,
},
.dma_mask = ~0,
.irq = {IRQ_LPC32XX_LCD, NO_IRQ},
};
static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
/*
* AMBA SSP (SPI)
......@@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
.enable_dma = 0,
};
static struct amba_device lpc32xx_ssp0_device = {
.dev = {
.coherent_dma_mask = ~0,
.init_name = "dev:ssp0",
.platform_data = &lpc32xx_ssp0_data,
},
.res = {
.start = LPC32XX_SSP0_BASE,
.end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
.flags = IORESOURCE_MEM,
},
.dma_mask = ~0,
.irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
};
static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
......
arch/arm/mach-mmp/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -8,12 +8,6 @@
#include <mach/regs-icu.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
and \tmp, \tmp, #0xff00
......
arch/arm/mach-mmp/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* linux/arch/arm/mach-mmp/include/mach/system.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif /* __ASM_MACH_SYSTEM_H */
arch/arm/mach-msm/idle.S → arch/arm/mach-msm/idle.c
View file @ 2cbe23e3
/* arch/arm/mach-msm/include/mach/idle.S
/* arch/arm/mach-msm/idle.c
*
* Idle processing for MSM7K - work around bugs with SWFI.
*
......@@ -16,21 +16,34 @@
*
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <linux/init.h>
#include <asm/system.h>
ENTRY(arch_idle)
static void msm_idle(void)
{
#ifdef CONFIG_MSM7X00A_IDLE
mrc p15, 0, r1, c1, c0, 0 /* read current CR */
bic r0, r1, #(1 << 2) /* clear dcache bit */
bic r0, r0, #(1 << 12) /* clear icache bit */
mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
asm volatile (
mov r0, #0 /* prepare wfi value */
mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
"mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
"bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
"bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
"mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
"mov r0, #0 /* prepare wfi value */ \n\t"
"mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
"mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
"mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
"mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
: : : "r0","r1" );
#endif
mov pc, lr
}
static int __init msm_idle_init(void)
{
arm_pm_idle = msm_idle;
return 0;
}
arch_initcall(msm_idle_init);
arch/arm/mach-msm/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -16,12 +16,6 @@
*
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#if !defined(CONFIG_ARM_GIC)
#include <mach/msm_iomap.h>
......
arch/arm/mach-msm/include/mach/system.h
View file @ 2cbe23e3
......@@ -12,7 +12,6 @@
* GNU General Public License for more details.
*
*/
void arch_idle(void);
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
......
arch/arm/mach-mv78xx0/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
......
arch/arm/mach-mv78xx0/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-mv78xx0/include/mach/system.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-mxs/devices.c
View file @ 2cbe23e3
......@@ -77,16 +77,18 @@ struct platform_device *__init mxs_add_platform_device_dmamask(
int __init mxs_add_amba_device(const struct amba_device *dev)
{
struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
dev->res.start, resource_size(&dev->res));
if (!adev) {
pr_err("%s: failed to allocate memory", __func__);
return -ENOMEM;
}
*adev = *dev;
adev->irq[0] = dev->irq[0];
adev->irq[1] = dev->irq[1];
return amba_device_register(adev, &iomem_resource);
return amba_device_add(adev, &iomem_resource);
}
struct device mxs_apbh_bus = {
......
arch/arm/mach-mxs/devices/amba-duart.c
View file @ 2cbe23e3
......@@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \
.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \
.flags = IORESOURCE_MEM, \
}, \
.irq = {soc ## _INT_DUART, NO_IRQ}, \
.irq = {soc ## _INT_DUART}, \
}
#ifdef CONFIG_SOC_IMX23
......
arch/arm/mach-mxs/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -23,9 +23,6 @@
#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
#define HW_ICOLL_STAT_OFFSET 0x70
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
cmp \irqnr, #0x7F
......@@ -36,6 +33,3 @@
.macro get_irqnr_preamble, base, tmp
ldr \base, =MXS_ICOLL_VBASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-mxs/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_MXS_SYSTEM_H__
#define __MACH_MXS_SYSTEM_H__
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif /* __MACH_MXS_SYSTEM_H__ */
arch/arm/mach-mxs/pm.c
View file @ 2cbe23e3
......@@ -15,13 +15,12 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
#include <mach/system.h>
static int mxs_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
arch_idle();
cpu_do_idle();
break;
default:
......
arch/arm/mach-netx/fb.c
View file @ 2cbe23e3
......@@ -92,18 +92,7 @@ void clk_put(struct clk *clk)
{
}
static struct amba_device fb_device = {
.dev = {
.init_name = "fb",
.coherent_dma_mask = ~0,
},
.res = {
.start = 0x00104000,
.end = 0x00104fff,
.flags = IORESOURCE_MEM,
},
.irq = { NETX_IRQ_LCD, NO_IRQ },
};
static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
......
arch/arm/mach-netx/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-netx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Hilscher netX based platforms
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-netx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-netx/include/mach/system.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-nomadik/board-nhk8815.c
View file @ 2cbe23e3
......@@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void)
#endif
}
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
{ IRQ_UART0 }, NULL);
static struct amba_device uart0_device = {
.dev = { .init_name = "uart0" },
__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
.irq = {IRQ_UART0, NO_IRQ},
};
static struct amba_device uart1_device = {
.dev = { .init_name = "uart1" },
__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
.irq = {IRQ_UART1, NO_IRQ},
};
static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
{ IRQ_UART1 }, NULL);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
......
arch/arm/mach-nomadik/cpu-8815.c
View file @ 2cbe23e3
......@@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = {
GPIO_DEVICE(3),
};
static struct amba_device cpu8815_amba_rng = {
.dev = {
.init_name = "rng",
},
__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
};
static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
static struct platform_device *platform_devs[] __initdata = {
cpu8815_platform_gpio + 0,
......@@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = {
};
static struct amba_device *amba_devs[] __initdata = {
&cpu8815_amba_rng
&cpu8815_amba_rng_device
};
static int __init cpu8815_init(void)
......
arch/arm/mach-nomadik/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* Low-level IRQ helper macros for Nomadik platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-nomadik/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* mach-nomadik/include/mach/system.h
*
* Copyright (C) 2008 STMicroelectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-omap1/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -14,15 +14,9 @@
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
......
arch/arm/mach-omap1/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-omap1/include/mach/system.h
*/
#include <plat/system.h>
arch/arm/mach-omap1/pm.c
View file @ 2cbe23e3
......@@ -42,9 +42,9 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/atomic.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
......@@ -108,13 +108,7 @@ void omap1_pm_idle(void)
__u32 use_idlect1 = arm_idlect1_mask;
int do_sleep = 0;
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
#warning Enable 32kHz OS timer in order to allow sleep states in idle
......@@ -157,14 +151,12 @@ void omap1_pm_idle(void)
omap_writel(saved_idlect1, ARM_IDLECT1);
local_fiq_enable();
local_irq_enable();
return;
}
omap_sram_suspend(omap_readl(ARM_IDLECT1),
omap_readl(ARM_IDLECT2));
local_fiq_enable();
local_irq_enable();
}
/*
......@@ -583,8 +575,6 @@ static void omap_pm_init_proc(void)
#endif /* DEBUG && CONFIG_PROC_FS */
static void (*saved_idle)(void) = NULL;
/*
* omap_pm_prepare - Do preliminary suspend work.
*
......@@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL;
static int omap_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
disable_hlt();
return 0;
}
......@@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state)
static void omap_pm_finish(void)
{
pm_idle = saved_idle;
enable_hlt();
}
......@@ -687,7 +676,7 @@ static int __init omap_pm_init(void)
return -ENODEV;
}
pm_idle = omap1_pm_idle;
arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
......
arch/arm/mach-omap2/emu.c
View file @ 2cbe23e3
......@@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin");
#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000)
#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000)
static struct amba_device omap3_etb_device = {
.dev = {
.init_name = "etb",
},
.res = {
.start = ETB_BASE,
.end = ETB_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.periphid = 0x000bb907,
};
static struct amba_device omap3_etm_device = {
.dev = {
.init_name = "etm",
},
.res = {
.start = ETM_BASE,
.end = ETM_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.periphid = 0x102bb921,
};
static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
static int __init emu_init(void)
{
......@@ -66,4 +45,3 @@ static int __init emu_init(void)
}
subsys_initcall(emu_init);
arch/arm/mach-omap2/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/plat-omap/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for OMAP-based platforms
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-omap2/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-omap2/include/mach/system.h
*/
#include <plat/system.h>
arch/arm/mach-omap2/pm24xx.c
View file @ 2cbe23e3
......@@ -226,7 +226,6 @@ static int omap2_can_sleep(void)
static void omap2_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (!omap2_can_sleep()) {
......@@ -243,7 +242,6 @@ static void omap2_pm_idle(void)
out:
local_fiq_enable();
local_irq_enable();
}
#ifdef CONFIG_SUSPEND
......@@ -462,7 +460,7 @@ static int __init omap2_pm_init(void)
}
suspend_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
arm_pm_idle = omap2_pm_idle;
return 0;
}
......
arch/arm/mach-omap2/pm34xx.c
View file @ 2cbe23e3
......@@ -418,10 +418,9 @@ void omap_sram_idle(void)
static void omap3_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (omap_irq_pending() || need_resched())
if (omap_irq_pending())
goto out;
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
......@@ -434,7 +433,6 @@ static void omap3_pm_idle(void)
out:
local_fiq_enable();
local_irq_enable();
}
#ifdef CONFIG_SUSPEND
......@@ -848,7 +846,7 @@ static int __init omap3_pm_init(void)
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
pm_idle = omap3_pm_idle;
arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
/*
......
arch/arm/mach-omap2/pm44xx.c
View file @ 2cbe23e3
......@@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
* with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* by secondary CPU with CONFIG_CPUIDLE.
*/
static void omap_default_idle(void)
{
local_irq_disable();
local_fiq_disable();
omap_do_wfi();
local_fiq_enable();
local_irq_enable();
}
/**
......@@ -255,8 +253,8 @@ static int __init omap4_pm_init(void)
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
/* Overwrite the default arch_idle() */
pm_idle = omap_default_idle;
/* Overwrite the default cpu_do_idle() */
arm_pm_idle = omap_default_idle;
omap4_idle_init();
......
arch/arm/mach-omap2/prm_common.c
View file @ 2cbe23e3
......@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <mach/system.h>
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
......
arch/arm/mach-orion5x/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =MAIN_IRQ_CAUSE
.endm
......
arch/arm/mach-orion5x/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-orion5x/include/mach/system.h
*
* Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-picoxcell/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* entry-macro.S
*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* Low-level IRQ helper macros for picoXcell platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-picoxcell/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching and wait for interrupt
* tricks.
*/
cpu_do_idle();
}
#endif /* __ASM_ARCH_SYSTEM_H */
arch/arm/mach-pnx4008/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -25,15 +25,9 @@
#define SIC1_BASE_INT 32
#define SIC2_BASE_INT 64
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* decode the MIC interrupt numbers */
ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
......
arch/arm/mach-pnx4008/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-pnx4008/include/mach/system.h
*
* Copyright (C) 2003 Philips Semiconductors
* Copyright (C) 2005 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-prima2/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -20,10 +20,3 @@
cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f
movges \irqnr, #0
.endm
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-prima2/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-prima2/include/mach/system.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/mach-pxa/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-pxa/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for PXA-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-pxa/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-pxa/include/mach/system.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-realview/core.h
View file @ 2cbe23e3
......@@ -28,21 +28,11 @@
#include <asm/setup.h>
#include <asm/leds.h>
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0, \
.init_name = busid, \
.platform_data = plat, \
}, \
.res = { \
.start = REALVIEW_##base##_BASE, \
.end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0, \
.irq = base##_IRQ, \
}
#define APB_DEVICE(name, busid, base, plat) \
static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
#define AHB_DEVICE(name, busid, base, plat) \
static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
struct machine_desc;
......
arch/arm/mach-realview/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for RealView platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-realview/include/mach/irqs-pb1176.h
View file @ 2cbe23e3
......@@ -40,6 +40,7 @@
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16)
#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
......@@ -73,7 +74,6 @@
#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
#define IRQ_PB1176_GPIO0 -1
#define IRQ_PB1176_SCTL -1
#define NR_GIC_PB1176 2
......
arch/arm/mach-realview/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-realview/include/mach/system.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-realview/realview_eb.c
View file @ 2cbe23e3
......@@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = {
/*
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
#define GPIO2_IRQ { IRQ_EB_GPIO2 }
#define GPIO3_IRQ { IRQ_EB_GPIO3 }
#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
#define AACI_IRQ { IRQ_EB_AACI }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
#define KMI0_IRQ { IRQ_EB_KMI0 }
#define KMI1_IRQ { IRQ_EB_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
#define EB_SMC_IRQ { }
#define MPMC_IRQ { }
#define EB_CLCD_IRQ { IRQ_EB_CLCD }
#define DMAC_IRQ { IRQ_EB_DMA }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
#define SCTL_IRQ { }
#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
#define GPIO1_IRQ { IRQ_EB_GPIO1 }
#define EB_RTC_IRQ { IRQ_EB_RTC }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
#define SCI_IRQ { IRQ_EB_SCI }
#define EB_UART0_IRQ { IRQ_EB_UART0 }
#define EB_UART1_IRQ { IRQ_EB_UART1 }
#define EB_UART2_IRQ { IRQ_EB_UART2 }
#define EB_UART3_IRQ { IRQ_EB_UART3 }
#define EB_SSP_IRQ { IRQ_EB_SSP }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
......
arch/arm/mach-realview/realview_pb1176.c
View file @ 2cbe23e3
......@@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = {
/*
* RealView PB1176 AMBA devices
*/
#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ }
#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ }
#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ }
#define GPIO2_IRQ { IRQ_PB1176_GPIO2 }
#define GPIO3_IRQ { IRQ_PB1176_GPIO3 }
#define AACI_IRQ { IRQ_PB1176_AACI }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ }
#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ }
#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ }
#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ }
#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ }
#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ }
#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ }
#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ }
#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ }
#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
#define KMI0_IRQ { IRQ_PB1176_KMI0 }
#define KMI1_IRQ { IRQ_PB1176_KMI1 }
#define PB1176_SMC_IRQ { }
#define MPMC_IRQ { }
#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
#define SCTL_IRQ { }
#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG }
#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 }
#define GPIO1_IRQ { IRQ_PB1176_GPIO1 }
#define PB1176_RTC_IRQ { IRQ_DC1176_RTC }
#define SCI_IRQ { IRQ_PB1176_SCI }
#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 }
#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 }
#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 }
#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 }
#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 }
#define PB1176_SSP_IRQ { IRQ_DC1176_SSP }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
......
arch/arm/mach-realview/realview_pb11mp.c
View file @ 2cbe23e3
......@@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
* RealView PB11MPCore AMBA devices
*/
#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ }
#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ }
#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ }
#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 }
#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 }
#define AACI_IRQ { IRQ_TC11MP_AACI }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ }
#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ }
#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ }
#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ }
#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ }
#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ }
#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ }
#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ }
#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ }
#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ }
#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ }
#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ }
#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ }
#define KMI0_IRQ { IRQ_TC11MP_KMI0 }
#define KMI1_IRQ { IRQ_TC11MP_KMI1 }
#define PB11MP_SMC_IRQ { }
#define MPMC_IRQ { }
#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD }
#define DMAC_IRQ { IRQ_PB11MP_DMAC }
#define SCTL_IRQ { }
#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG }
#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 }
#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 }
#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC }
#define SCI_IRQ { IRQ_PB11MP_SCI }
#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 }
#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 }
#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 }
#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 }
#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
......
arch/arm/mach-realview/realview_pba8.c
View file @ 2cbe23e3
......@@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
* RealView PBA8Core AMBA devices
*/
#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
#define GPIO2_IRQ { IRQ_PBA8_GPIO2 }
#define GPIO3_IRQ { IRQ_PBA8_GPIO3 }
#define AACI_IRQ { IRQ_PBA8_AACI }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
#define KMI0_IRQ { IRQ_PBA8_KMI0 }
#define KMI1_IRQ { IRQ_PBA8_KMI1 }
#define PBA8_SMC_IRQ { }
#define MPMC_IRQ { }
#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD }
#define DMAC_IRQ { IRQ_PBA8_DMAC }
#define SCTL_IRQ { }
#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG }
#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 }
#define GPIO1_IRQ { IRQ_PBA8_GPIO1 }
#define PBA8_RTC_IRQ { IRQ_PBA8_RTC }
#define SCI_IRQ { IRQ_PBA8_SCI }
#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 }
#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 }
#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 }
#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 }
#define PBA8_SSP_IRQ { IRQ_PBA8_SSP }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
......
arch/arm/mach-realview/realview_pbx.c
View file @ 2cbe23e3
......@@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
* RealView PBXCore AMBA devices
*/
#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
#define GPIO2_IRQ { IRQ_PBX_GPIO2 }
#define GPIO3_IRQ { IRQ_PBX_GPIO3 }
#define AACI_IRQ { IRQ_PBX_AACI }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
#define KMI0_IRQ { IRQ_PBX_KMI0 }
#define KMI1_IRQ { IRQ_PBX_KMI1 }
#define PBX_SMC_IRQ { }
#define MPMC_IRQ { }
#define PBX_CLCD_IRQ { IRQ_PBX_CLCD }
#define DMAC_IRQ { IRQ_PBX_DMAC }
#define SCTL_IRQ { }
#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG }
#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 }
#define GPIO1_IRQ { IRQ_PBX_GPIO1 }
#define PBX_RTC_IRQ { IRQ_PBX_RTC }
#define SCI_IRQ { IRQ_PBX_SCI }
#define PBX_UART0_IRQ { IRQ_PBX_UART0 }
#define PBX_UART1_IRQ { IRQ_PBX_UART1 }
#define PBX_UART2_IRQ { IRQ_PBX_UART2 }
#define PBX_UART3_IRQ { IRQ_PBX_UART3 }
#define PBX_SSP_IRQ { IRQ_PBX_SSP }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
......
arch/arm/mach-rpc/Makefile
View file @ 2cbe23e3
......@@ -4,7 +4,7 @@
# Object file lists.
obj-y := dma.o irq.o riscpc.o
obj-y := dma.o fiq.o irq.o riscpc.o
obj-m :=
obj-n :=
obj- :=
......
arch/arm/mach-rpc/fiq.S 0 → 100644
View file @ 2cbe23e3
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/entry-macro.S>
.text
.global rpc_default_fiq_end
ENTRY(rpc_default_fiq_start)
mov r12, #ioc_base_high
.if ioc_base_low
orr r12, r12, #ioc_base_low
.endif
strb r12, [r12, #0x38] @ Disable FIQ register
subs pc, lr, #4
rpc_default_fiq_end:
arch/arm/mach-rpc/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -10,7 +10,3 @@
orr \base, \base, #ioc_base_low
.endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-rpc/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-rpc/include/mach/system.h
*
* Copyright (C) 1996-1999 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-rpc/irq.c
View file @ 2cbe23e3
......@@ -5,6 +5,7 @@
#include <asm/mach/irq.h>
#include <asm/hardware/iomd.h>
#include <asm/irq.h>
#include <asm/fiq.h>
static void iomd_ack_irq_a(struct irq_data *d)
{
......@@ -112,6 +113,8 @@ static struct irq_chip iomd_fiq_chip = {
.irq_unmask = iomd_unmask_irq_fiq,
};
extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
void __init rpc_init_irq(void)
{
unsigned int irq, flags;
......@@ -121,6 +124,9 @@ void __init rpc_init_irq(void)
iomd_writeb(0, IOMD_FIQMASK);
iomd_writeb(0, IOMD_DMAMASK);
set_fiq_handler(&rpc_default_fiq_start,
&rpc_default_fiq_end - &rpc_default_fiq_start);
for (irq = 0; irq < NR_IRQS; irq++) {
flags = IRQF_VALID;
......
arch/arm/mach-s3c2410/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -25,9 +25,6 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #S3C24XX_VA_IRQ
......@@ -71,8 +68,3 @@
@@ exit here, Z flag unset if IRQ
.endm
/* currently don't need an disable_fiq macro */
.macro disable_fiq
.endm
arch/arm/mach-s3c2410/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* arch/arm/mach-s3c2410/include/mach/system.h
*
* Copyright (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - System function defines and includes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/idle.h>
#include <mach/regs-clock.h>
void (*s3c24xx_idle)(void);
void s3c24xx_default_idle(void)
{
unsigned long tmp;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++) {
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
}
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
static void arch_idle(void)
{
if (s3c24xx_idle != NULL)
(s3c24xx_idle)();
else
s3c24xx_default_idle();
}
arch/arm/mach-s3c2412/s3c2412.c
View file @ 2cbe23e3
......@@ -32,8 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
......@@ -164,7 +162,7 @@ void __init s3c2412_map_io(void)
/* set our idle function */
s3c24xx_idle = s3c2412_idle;
arm_pm_idle = s3c2412_idle;
/* register our io-tables */
......
arch/arm/mach-s3c2416/s3c2416.c
View file @ 2cbe23e3
......@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/gpio-core.h>
......@@ -88,8 +87,6 @@ int __init s3c2416_init(void)
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
/* s3c24xx_idle = s3c2416_idle; */
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
......
arch/arm/mach-s3c64xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Low-level IRQ helper macros for the Samsung S3C64XX series
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-s3c64xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-s3c6400/include/mach/system.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - system implementation
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s5p64x0/common.c
View file @ 2cbe23e3
......@@ -146,15 +146,12 @@ static void s5p64x0_idle(void)
{
unsigned long val;
if (!need_resched()) {
val = __raw_readl(S5P64X0_PWR_CFG);
val &= ~(0x3 << 5);
val |= (0x1 << 5);
__raw_writel(val, S5P64X0_PWR_CFG);
cpu_do_idle();
}
local_irq_enable();
}
/*
......@@ -286,7 +283,7 @@ int __init s5p64x0_init(void)
printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
/* set idle function */
pm_idle = s5p64x0_idle;
arm_pm_idle = s5p64x0_idle;
return device_register(&s5p64x0_dev);
}
......
arch/arm/mach-s5p64x0/dma.c
View file @ 2cbe23e3
......@@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = {
.peri_id = s5p6450_pdma_peri,
};
struct amba_device s5p64x0_device_pdma = {
.dev = {
.init_name = "dma-pl330",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.res = {
.start = S5P64X0_PA_PDMA,
.end = S5P64X0_PA_PDMA + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_DMA0, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
{IRQ_DMA0}, NULL);
static int __init s5p64x0_dma_init(void)
{
if (soc_is_s5p6450()) {
dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
} else {
dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
}
amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
return 0;
}
......
arch/arm/mach-s5p64x0/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Low-level IRQ helper macros for the Samsung S5P64X0
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-s5p64x0/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - system support header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_SYSTEM_H */
arch/arm/mach-s5pc100/common.c
View file @ 2cbe23e3
......@@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
}
};
static void s5pc100_idle(void)
{
if (!need_resched())
cpu_do_idle();
local_irq_enable();
}
/*
* s5pc100_map_io
*
......@@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init);
int __init s5pc100_init(void)
{
printk(KERN_INFO "S5PC100: Initializing architecture\n");
/* set idle function */
pm_idle = s5pc100_idle;
return device_register(&s5pc100_dev);
}
......
arch/arm/mach-s5pc100/dma.c
View file @ 2cbe23e3
......@@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.peri_id = pdma0_peri,
};
struct amba_device s5pc100_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma0_pdata,
},
.res = {
.start = S5PC100_PA_PDMA0,
.end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0,
{IRQ_PDMA0}, &s5pc100_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_UART0_RX,
......@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.peri_id = pdma1_peri,
};
struct amba_device s5pc100_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma1_pdata,
},
.res = {
.start = S5PC100_PA_PDMA1,
.end = S5PC100_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1,
{IRQ_PDMA1}, &s5pc100_pdma1_pdata);
static int __init s5pc100_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
return 0;
}
......
arch/arm/mach-s5pc100/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -12,14 +12,8 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
.endm
arch/arm/mach-s5pc100/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-s5pc100/include/mach/system.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC100 - system implementation
*
* Based on mach-s3c6400/include/mach/system.h
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s5pv210/common.c
View file @ 2cbe23e3
......@@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
}
};
static void s5pv210_idle(void)
{
if (!need_resched())
cpu_do_idle();
local_irq_enable();
}
void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
......@@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init);
int __init s5pv210_init(void)
{
printk(KERN_INFO "S5PV210: Initializing architecture\n");
/* set idle function */
pm_idle = s5pv210_idle;
return device_register(&s5pv210_dev);
}
......
arch/arm/mach-s5pv210/dma.c
View file @ 2cbe23e3
......@@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = {
.peri_id = pdma0_peri,
};
struct amba_device s5pv210_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma0_pdata,
},
.res = {
.start = S5PV210_PA_PDMA0,
.end = S5PV210_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0,
{IRQ_PDMA0}, &s5pv210_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_UART0_RX,
......@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = {
.peri_id = pdma1_peri,
};
struct amba_device s5pv210_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma1_pdata,
},
.res = {
.start = S5PV210_PA_PDMA1,
.end = S5PV210_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1,
{IRQ_PDMA1}, &s5pv210_pdma1_pdata);
static int __init s5pv210_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
return 0;
}
......
arch/arm/mach-s5pv210/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Low-level IRQ helper macros for the Samsung S5PV210
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-s5pv210/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* linux/arch/arm/mach-s5pv210/include/mach/system.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - system support header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_SYSTEM_H */
arch/arm/mach-sa1100/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -8,17 +8,11 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #0xfa000000 @ ICIP = 0xfa050000
add \base, \base, #0x00050000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base] @ get irqs
ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
......
arch/arm/mach-sa1100/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-sa1100/include/mach/system.h
*
* Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-shark/core.c
View file @ 2cbe23e3
......@@ -149,10 +149,16 @@ static struct sys_timer shark_timer = {
.init = shark_timer_init,
};
static void shark_init_early(void)
{
disable_hlt();
}
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
.map_io = shark_map_io,
.init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
......
arch/arm/mach-shark/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -7,16 +7,10 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #0xe0000000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqstat, #0x0C
......
arch/arm/mach-shark/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-shark/include/mach/system.h
*
* by Alexander Schulz
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
}
#endif
arch/arm/mach-shmobile/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright (C) 2010 Paul Mundt
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-shmobile/include/mach/system.h
View file @ 2cbe23e3
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
......
arch/arm/mach-spear3xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-spear3xx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-spear3xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-spear3xx/include/mach/system.h
*
* SPEAr3xx Machine family specific architecture functions
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <plat/system.h>
#endif /* __MACH_SYSTEM_H */
arch/arm/mach-spear3xx/spear300.c
View file @ 2cbe23e3
......@@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = {
.irq_base = SPEAR300_GPIO1_INT_BASE,
};
struct amba_device spear300_gpio1_device = {
.dev = {
.init_name = "gpio1",
.platform_data = &gpio1_plat_data,
},
.res = {
.start = SPEAR300_GPIO_BASE,
.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
};
AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
/* spear300 routines */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
......
arch/arm/mach-spear3xx/spear3xx.c
View file @ 2cbe23e3
......@@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = {
.irq_base = SPEAR3XX_GPIO_INT_BASE,
};
struct amba_device spear3xx_gpio_device = {
.dev = {
.init_name = "gpio",
.platform_data = &gpio_plat_data,
},
.res = {
.start = SPEAR3XX_ICM3_GPIO_BASE,
.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
};
AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
/* uart device registration */
struct amba_device spear3xx_uart_device = {
.dev = {
.init_name = "uart",
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
};
AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
{SPEAR3XX_IRQ_UART}, NULL);
/* Do spear3xx familiy common initialization part here */
void __init spear3xx_init(void)
......
arch/arm/mach-spear6xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-spear6xx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-spear6xx/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-spear6xx/include/mach/system.h
*
* SPEAr6xx Machine family specific architecture functions
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <plat/system.h>
#endif /* __MACH_SYSTEM_H */
arch/arm/mach-spear6xx/spear6xx.c
View file @ 2cbe23e3
......@@ -34,7 +34,7 @@ struct amba_device uart_device[] = {
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
.irq = {IRQ_UART_0},
}, {
.dev = {
.init_name = "uart1",
......@@ -44,7 +44,7 @@ struct amba_device uart_device[] = {
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
.irq = {IRQ_UART_1},
}
};
......@@ -73,7 +73,7 @@ struct amba_device gpio_device[] = {
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
.irq = {IRQ_LOCAL_GPIO},
}, {
.dev = {
.init_name = "gpio1",
......@@ -84,7 +84,7 @@ struct amba_device gpio_device[] = {
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
.irq = {IRQ_BASIC_GPIO},
}, {
.dev = {
.init_name = "gpio2",
......@@ -95,7 +95,7 @@ struct amba_device gpio_device[] = {
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO, NO_IRQ},
.irq = {IRQ_APPL_GPIO},
}
};
......
arch/arm/mach-tegra/Kconfig
View file @ 2cbe23e3
......@@ -8,8 +8,16 @@ config ARCH_TEGRA_2x_SOC
select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_720789
select ARM_ERRATA_742230
select ARM_ERRATA_751472
select ARM_ERRATA_754327
select ARM_ERRATA_764369
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
......@@ -20,9 +28,15 @@ config ARCH_TEGRA_3x_SOC
select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
select USE_OF
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
select ARM_ERRATA_764369
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
......
arch/arm/mach-tegra/board-harmony-pinmux.c
View file @ 2cbe23e3
......@@ -53,7 +53,7 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GPU, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_I2CP, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_IRRX, TEGRA_MUX_UARTA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
......@@ -112,10 +112,10 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDD, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
......
arch/arm/mach-tegra/common.c
View file @ 2cbe23e3
......@@ -27,7 +27,6 @@
#include <asm/hardware/gic.h>
#include <mach/iomap.h>
#include <mach/system.h>
#include "board.h"
#include "clock.h"
......
arch/arm/mach-tegra/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/* arch/arm/mach-tegra/include/mach/entry-macro.S
*
* Copyright (C) 2009 Palm, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-tegra/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-tegra/include/mach/system.h
*
* Copyright (C) 2010 Google, Inc.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_SYSTEM_H
#define __MACH_TEGRA_SYSTEM_H
static inline void arch_idle(void)
{
}
#endif
arch/arm/mach-tegra/pcie.c
View file @ 2cbe23e3
......@@ -585,10 +585,10 @@ static void tegra_pcie_setup_translations(void)
afi_writel(0, AFI_MSI_BAR_SZ);
}
static void tegra_pcie_enable_controller(void)
static int tegra_pcie_enable_controller(void)
{
u32 val, reg;
int i;
int i, timeout;
/* Enable slot clock and pulse the reset signals */
for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
......@@ -639,8 +639,14 @@ static void tegra_pcie_enable_controller(void)
pads_writel(0xfa5cfa5c, 0xc8);
/* Wait for the PLL to lock */
timeout = 300;
do {
val = pads_readl(PADS_PLL_CTL);
usleep_range(1000, 1000);
if (--timeout == 0) {
pr_err("Tegra PCIe error: timeout waiting for PLL\n");
return -EBUSY;
}
} while (!(val & PADS_PLL_CTL_LOCKDET));
/* turn off IDDQ override */
......@@ -671,7 +677,7 @@ static void tegra_pcie_enable_controller(void)
/* Disable all execptions */
afi_writel(0, AFI_FPCI_ERROR_MASKS);
return;
return 0;
}
static void tegra_pcie_xclk_clamp(bool clamp)
......@@ -921,7 +927,9 @@ int __init tegra_pcie_init(bool init_port0, bool init_port1)
if (err)
return err;
tegra_pcie_enable_controller();
err = tegra_pcie_enable_controller();
if (err)
return err;
/* setup the AFI address translations */
tegra_pcie_setup_translations();
......
arch/arm/mach-tegra/usb_phy.c
View file @ 2cbe23e3
......@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
......@@ -730,6 +731,7 @@ struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
kfree(phy);
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
{
......@@ -738,6 +740,7 @@ int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
else
return utmi_phy_power_on(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on);
void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
{
......@@ -746,18 +749,21 @@ void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
else
utmi_phy_power_off(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off);
void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
{
if (!phy_is_ulpi(phy))
utmi_phy_preresume(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
{
if (!phy_is_ulpi(phy))
utmi_phy_postresume(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
enum tegra_usb_phy_port_speed port_speed)
......@@ -765,24 +771,28 @@ void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
if (!phy_is_ulpi(phy))
utmi_phy_restore_start(phy, port_speed);
}
EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
{
if (!phy_is_ulpi(phy))
utmi_phy_restore_end(phy);
}
EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
{
if (!phy_is_ulpi(phy))
utmi_phy_clk_disable(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable);
void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
{
if (!phy_is_ulpi(phy))
utmi_phy_clk_enable(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
void tegra_usb_phy_close(struct tegra_usb_phy *phy)
{
......@@ -794,3 +804,4 @@ void tegra_usb_phy_close(struct tegra_usb_phy *phy)
clk_put(phy->pll_u);
kfree(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_close);
arch/arm/mach-u300/core.c
View file @ 2cbe23e3
......@@ -94,19 +94,9 @@ static struct amba_pl011_data uart0_plat_data = {
#endif
};
static struct amba_device uart0_device = {
.dev = {
.coherent_dma_mask = ~0,
.init_name = "uart0", /* Slow device at 0x3000 offset */
.platform_data = &uart0_plat_data,
},
.res = {
.start = U300_UART0_BASE,
.end = U300_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_U300_UART0, NO_IRQ },
};
/* Slow device at 0x3000 offset */
static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
{ IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
#ifdef CONFIG_MACH_U300_BS335
......@@ -118,71 +108,28 @@ static struct amba_pl011_data uart1_plat_data = {
#endif
};
static struct amba_device uart1_device = {
.dev = {
.coherent_dma_mask = ~0,
.init_name = "uart1", /* Fast device at 0x7000 offset */
.platform_data = &uart1_plat_data,
},
.res = {
.start = U300_UART1_BASE,
.end = U300_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_U300_UART1, NO_IRQ },
};
/* Fast device at 0x7000 offset */
static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
{ IRQ_U300_UART1 }, &uart1_plat_data);
#endif
static struct amba_device pl172_device = {
.dev = {
.init_name = "pl172", /* AHB device at 0x4000 offset */
.platform_data = NULL,
},
.res = {
.start = U300_EMIF_CFG_BASE,
.end = U300_EMIF_CFG_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
/* AHB device at 0x4000 offset */
static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
/*
* Everything within this next ifdef deals with external devices connected to
* the APP SPI bus.
*/
static struct amba_device pl022_device = {
.dev = {
.coherent_dma_mask = ~0,
.init_name = "pl022", /* Fast device at 0x6000 offset */
},
.res = {
.start = U300_SPI_BASE,
.end = U300_SPI_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_U300_SPI, NO_IRQ },
/*
* This device has a DMA channel but the Linux driver does not use
* it currently.
*/
};
/* Fast device at 0x6000 offset */
static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
{ IRQ_U300_SPI }, NULL);
static struct amba_device mmcsd_device = {
.dev = {
.init_name = "mmci", /* Fast device at 0x1000 offset */
.platform_data = NULL, /* Added later */
},
.res = {
.start = U300_MMCSD_BASE,
.end = U300_MMCSD_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
/*
* This device has a DMA channel but the Linux driver does not use
* it currently.
*/
};
/* Fast device at 0x1000 offset */
#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
U300_MMCSD_IRQS, NULL);
/*
* The order of device declaration may be important, since some devices
......
arch/arm/mach-u300/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
*
* arch-arm/mach-u300/include/mach/entry-macro.S
*
*
* Copyright (C) 2006-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Low-level IRQ helper macros for ST-Ericsson U300
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-u300/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
*
* arch/arm/mach-u300/include/mach/system.h
*
*
* Copyright (C) 2007-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* System shutdown and reset functions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
arch/arm/mach-ux500/devices-common.c
View file @ 2cbe23e3
......@@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
struct amba_device *dev;
int ret;
dev = kzalloc(sizeof *dev, GFP_KERNEL);
dev = amba_device_alloc(name, base, SZ_4K);
if (!dev)
return ERR_PTR(-ENOMEM);
dev->dev.init_name = name;
dev->res.start = base;
dev->res.end = base + SZ_4K - 1;
dev->res.flags = IORESOURCE_MEM;
dev->dma_mask = DMA_BIT_MASK(32);
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->irq[0] = irq;
dev->irq[1] = NO_IRQ;
dev->periphid = periphid;
dev->dev.platform_data = pdata;
ret = amba_device_register(dev, &iomem_resource);
ret = amba_device_add(dev, &iomem_resource);
if (ret) {
kfree(dev);
amba_device_put(dev);
return ERR_PTR(ret);
}
......
arch/arm/mach-ux500/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* Low-level IRQ helper macros for U8500 platforms
*
* Copyright (C) 2009 ST-Ericsson.
*
* This file is a copy of ARM Realview platform.
* -just satisfied checkpatch script.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-ux500/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright (C) 2009 ST-Ericsson.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-versatile/core.c
View file @ 2cbe23e3
......@@ -582,58 +582,58 @@ static struct pl022_ssp_controller ssp0_plat_data = {
.num_chipselect = 1,
};
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_IRQ { IRQ_AACI }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
#define KMI0_IRQ { IRQ_SIC_KMI0 }
#define KMI1_IRQ { IRQ_SIC_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define SMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
#define SMC_IRQ { }
#define MPMC_IRQ { }
#define CLCD_IRQ { IRQ_CLCDINT }
#define DMAC_IRQ { IRQ_DMAINT }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
#define SCTL_IRQ { }
#define WATCHDOG_IRQ { IRQ_WDOGINT }
#define GPIO0_IRQ { IRQ_GPIOINT0 }
#define GPIO1_IRQ { IRQ_GPIOINT1 }
#define RTC_IRQ { IRQ_RTCINT }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
#define SCI_IRQ { IRQ_SCIINT }
#define UART0_IRQ { IRQ_UARTINT0 }
#define UART1_IRQ { IRQ_UARTINT1 }
#define UART2_IRQ { IRQ_UARTINT2 }
#define SSP_IRQ { IRQ_SSPINT }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
APB_DEVICE(aaci, "fpga:04", AACI, NULL);
APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
APB_DEVICE(kmi0, "fpga:06", KMI0, NULL);
APB_DEVICE(kmi1, "fpga:07", KMI1, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:00", SMC, NULL);
AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
AHB_DEVICE(smc, "dev:00", SMC, NULL);
AHB_DEVICE(mpmc, "dev:10", MPMC, NULL);
AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
AHB_DEVICE(dmac, "dev:30", DMAC, NULL);
APB_DEVICE(sctl, "dev:e0", SCTL, NULL);
APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
APB_DEVICE(rtc, "dev:e8", RTC, NULL);
APB_DEVICE(sci0, "dev:f0", SCI, NULL);
APB_DEVICE(uart0, "dev:f1", UART0, NULL);
APB_DEVICE(uart1, "dev:f2", UART1, NULL);
APB_DEVICE(uart2, "dev:f3", UART2, NULL);
APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
......
arch/arm/mach-versatile/core.h
View file @ 2cbe23e3
......@@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev);
extern struct of_dev_auxdata versatile_auxdata_lookup[];
#endif
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0, \
.init_name = busid, \
.platform_data = plat, \
}, \
.res = { \
.start = VERSATILE_##base##_BASE, \
.end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0, \
.irq = base##_IRQ, \
}
#define APB_DEVICE(name, busid, base, plat) \
static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
#define AHB_DEVICE(name, busid, base, plat) \
static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
#endif
arch/arm/mach-versatile/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-versatile/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Versatile platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-versatile/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-versatile/include/mach/system.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-versatile/versatile_pb.c
View file @ 2cbe23e3
......@@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = {
.irq_base = IRQ_GPIO3_START,
};
#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ }
#define UART3_IRQ { IRQ_SIC_UART3 }
#define SCI1_IRQ { IRQ_SIC_SCI3 }
#define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B }
/*
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
#define GPIO2_IRQ { IRQ_GPIOINT2 }
#define GPIO3_IRQ { IRQ_GPIOINT3 }
/*
* These devices are connected via the DMA APB bridge
*/
/* FPGA Primecells */
AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
APB_DEVICE(uart3, "fpga:09", UART3, NULL);
APB_DEVICE(sci1, "fpga:0a", SCI1, NULL);
APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
......
arch/arm/mach-vexpress/core.h
View file @ 2cbe23e3
#define AMBA_DEVICE(name,busid,base,plat) \
struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0UL, \
.init_name = busid, \
.platform_data = plat, \
}, \
.res = { \
.start = base, \
.end = base + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0UL, \
.irq = IRQ_##base, \
/* .dma = DMA_##base,*/ \
}
/* 2MB large area for motherboard's peripherals static mapping */
#define V2M_PERIPH 0xf8000000
......
arch/arm/mach-vexpress/ct-ca9x4.c
View file @ 2cbe23e3
......@@ -92,10 +92,10 @@ static struct clcd_board ct_ca9x4_clcd_data = {
.remove = versatile_clcd_remove_dma,
};
static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
......
arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
View file @ 2cbe23e3
......@@ -32,7 +32,7 @@
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_CT_CA9X4_CLCDC { 76 }
#define IRQ_CT_CA9X4_DMC { -1 }
#define IRQ_CT_CA9X4_DMC { 0 }
#define IRQ_CT_CA9X4_SMC { 77, 78 }
#define IRQ_CT_CA9X4_TIMER0 80
#define IRQ_CT_CA9X4_TIMER1 81
......
arch/arm/mach-vexpress/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-vexpress/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-vexpress/include/mach/system.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif
arch/arm/mach-vexpress/v2m.c
View file @ 2cbe23e3
......@@ -288,16 +288,16 @@ static struct mmci_platform_data v2m_mmci_data = {
.status = v2m_mmci_status,
};
static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL);
static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data);
static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL);
static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL);
static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL);
static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL);
static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
static struct amba_device *v2m_amba_devs[] __initdata = {
&aaci_device,
......
arch/arm/mach-vt8500/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -8,18 +8,12 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
@ physical 0xd8140000 is virtual 0xf8140000
mov \base, #0xf8000000
orr \base, \base, #0x00140000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base]
cmp \irqnr, #63 @ may be false positive, check interrupt status
......
arch/arm/mach-vt8500/include/mach/system.h
View file @ 2cbe23e3
......@@ -7,11 +7,6 @@
/* PM Software Reset request register */
#define VT8500_PMSR_VIRT 0xf8130060
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
writel(1, VT8500_PMSR_VIRT);
......
arch/arm/mach-w90x900/dev.c
View file @ 2cbe23e3
......@@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = {
void __init nuc900_board_init(struct platform_device **device, int size)
{
disable_hlt();
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
......
arch/arm/mach-w90x900/include/mach/entry-macro.S
View file @ 2cbe23e3
......@@ -15,9 +15,6 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #AIC_BA
......@@ -27,8 +24,3 @@
cmp \irqnr, #0
.endm
/* currently don't need an disable_fiq macro */
.macro disable_fiq
.endm
arch/arm/mach-w90x900/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-w90x900/include/mach/system.h
*
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
* Based on arch/arm/mach-s3c2410/include/mach/system.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
static void arch_idle(void)
{
}
arch/arm/mach-zynq/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/mach-zynq/include/mach/entry-macro.S
*
* Low-level IRQ helper macros
*
* Copyright (C) 2011 Xilinx
*
* based on arch/plat-mxc/include/mach/entry-macro.S
*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-zynq/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/* arch/arm/mach-zynq/include/mach/system.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/plat-mxc/include/mach/entry-macro.S deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
* Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/plat-mxc/include/mach/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
arch/arm/plat-omap/include/plat/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* Copied from arch/arm/mach-sa1100/include/mach/system.h
* Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/proc-fns.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
#endif
arch/arm/plat-s3c24xx/cpu.c
View file @ 2cbe23e3
......@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
......@@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void)
return __raw_readl(S3C2410_GSTATUS1);
}
static void s3c24xx_default_idle(void)
{
unsigned long tmp;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++)
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
arm_pm_idle = s3c24xx_default_idle;
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
......
arch/arm/plat-spear/include/plat/system.h deleted 100644 → 0
View file @ b2f1df8d
/*
* arch/arm/plat-spear/include/plat/system.h
*
* SPEAr platform specific architecture functions
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __PLAT_SYSTEM_H
#define __PLAT_SYSTEM_H
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
#endif /* __PLAT_SYSTEM_H */
drivers/amba/bus.c
View file @ 2cbe23e3
......@@ -497,37 +497,22 @@ static void amba_device_release(struct device *dev)
}
/**
* amba_device_register - register an AMBA device
* @dev: AMBA device to register
* @parent: parent memory resource
* amba_device_add - add a previously allocated AMBA device structure
* @dev: AMBA device allocated by amba_device_alloc
* @parent: resource parent for this devices resources
*
* Setup the AMBA device, reading the cell ID if present.
* Claim the resource, and register the AMBA device with
* the Linux device manager.
* Claim the resource, and read the device cell ID if not already
* initialized. Register the AMBA device with the Linux device
* manager.
*/
int amba_device_register(struct amba_device *dev, struct resource *parent)
int amba_device_add(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
device_initialize(&dev->dev);
/*
* Copy from device_add
*/
if (dev->dev.init_name) {
dev_set_name(&dev->dev, "%s", dev->dev.init_name);
dev->dev.init_name = NULL;
}
dev->dev.release = amba_device_release;
dev->dev.bus = &amba_bustype;
dev->dev.dma_mask = &dev->dma_mask;
dev->res.name = dev_name(&dev->dev);
if (!dev->dev.coherent_dma_mask && dev->dma_mask)
dev_warn(&dev->dev, "coherent dma mask is unset\n");
WARN_ON(dev->irq[0] == (unsigned int)-1);
WARN_ON(dev->irq[1] == (unsigned int)-1);
ret = request_resource(parent, &dev->res);
if (ret)
......@@ -582,9 +567,9 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
if (ret)
goto err_release;
if (dev->irq[0] != NO_IRQ)
if (dev->irq[0] && dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
if (ret == 0 && dev->irq[1] != NO_IRQ)
if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
......@@ -596,6 +581,74 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
err_out:
return ret;
}
EXPORT_SYMBOL_GPL(amba_device_add);
static void amba_device_initialize(struct amba_device *dev, const char *name)
{
device_initialize(&dev->dev);
if (name)
dev_set_name(&dev->dev, "%s", name);
dev->dev.release = amba_device_release;
dev->dev.bus = &amba_bustype;
dev->dev.dma_mask = &dev->dma_mask;
dev->res.name = dev_name(&dev->dev);
}
/**
* amba_device_alloc - allocate an AMBA device
* @name: sysfs name of the AMBA device
* @base: base of AMBA device
* @size: size of AMBA device
*
* Allocate and initialize an AMBA device structure. Returns %NULL
* on failure.
*/
struct amba_device *amba_device_alloc(const char *name, resource_size_t base,
size_t size)
{
struct amba_device *dev;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev) {
amba_device_initialize(dev, name);
dev->res.start = base;
dev->res.end = base + size - 1;
dev->res.flags = IORESOURCE_MEM;
}
return dev;
}
EXPORT_SYMBOL_GPL(amba_device_alloc);
/**
* amba_device_register - register an AMBA device
* @dev: AMBA device to register
* @parent: parent memory resource
*
* Setup the AMBA device, reading the cell ID if present.
* Claim the resource, and register the AMBA device with
* the Linux device manager.
*/
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
amba_device_initialize(dev, dev->dev.init_name);
dev->dev.init_name = NULL;
if (!dev->dev.coherent_dma_mask && dev->dma_mask)
dev_warn(&dev->dev, "coherent dma mask is unset\n");
return amba_device_add(dev, parent);
}
/**
* amba_device_put - put an AMBA device
* @dev: AMBA device to put
*/
void amba_device_put(struct amba_device *dev)
{
put_device(&dev->dev);
}
EXPORT_SYMBOL_GPL(amba_device_put);
/**
* amba_device_unregister - unregister an AMBA device
......
drivers/mmc/host/mmci.c
View file @ 2cbe23e3
......@@ -1326,7 +1326,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
if (ret)
goto unmap;
if (dev->irq[1] == NO_IRQ)
if (dev->irq[1] == NO_IRQ || !dev->irq[1])
host->singleirq = true;
else {
ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
......
drivers/of/platform.c
View file @ 2cbe23e3
......@@ -253,7 +253,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
if (!of_device_is_available(node))
return NULL;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
return NULL;
......@@ -283,14 +283,14 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
if (ret)
goto err_free;
ret = amba_device_register(dev, &iomem_resource);
ret = amba_device_add(dev, &iomem_resource);
if (ret)
goto err_free;
return dev;
err_free:
kfree(dev);
amba_device_put(dev);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
......
include/linux/amba/bus.h
View file @ 2cbe23e3
......@@ -60,6 +60,9 @@ extern struct bus_type amba_bustype;
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
void amba_device_put(struct amba_device *);
int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
......@@ -89,4 +92,37 @@ void amba_release_regions(struct amba_device *);
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
#define __AMBA_DEV(busid, data, mask) \
{ \
.coherent_dma_mask = mask, \
.init_name = busid, \
.platform_data = data, \
}
/*
* APB devices do not themselves have the ability to address memory,
* so DMA masks should be zero (much like USB peripheral devices.)
* The DMA controller DMA masks should be used instead (much like
* USB host controllers in conventional PCs.)
*/
#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
struct amba_device name##_device = { \
.dev = __AMBA_DEV(busid, data, 0), \
.res = DEFINE_RES_MEM(base, SZ_4K), \
.irq = irqs, \
.periphid = id, \
}
/*
* AHB devices are DMA capable, so set their DMA masks
*/
#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
struct amba_device name##_device = { \
.dev = __AMBA_DEV(busid, data, ~0ULL), \
.res = DEFINE_RES_MEM(base, SZ_4K), \
.dma_mask = ~0ULL, \
.irq = irqs, \
.periphid = id, \
}
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7