Merge branch 'tegra/cleanups' into next/timer

Conflicts:
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-vexpress/core.h

The tegra Makefile was changed in four different branches
in the same line. This merge should reduce the amount
of churn.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
 config FIQ
 	bool
 
+config NEED_RET_TO_USER
+	bool
+
 config ARCH_MTD_XIP
 	bool
 
@@ -479,6 +482,7 @@ config ARCH_IOP13XX
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
 	select NEED_MACH_MEMORY_H
+	select NEED_RET_TO_USER
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -486,6 +490,7 @@ config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_RET_TO_USER
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
@@ -497,6 +502,7 @@ config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_RET_TO_USER
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/Kconfig.debug

@@ -81,25 +81,6 @@ choice
 	prompt "Kernel low-level debugging port"
 	depends on DEBUG_LL
 
-	config DEBUG_LL_UART_NONE
-		bool "No low-level debugging UART"
-		help
-		  Say Y here if your platform doesn't provide a UART option
-		  below. This relies on your platform choosing the right UART
-		  definition internally in order for low-level debugging to
-		  work.
-
-	config DEBUG_ICEDCC
-		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the EmbeddedICE macrocell's DCC channel using
-		  co-processor 14. This is known to work on the ARM9 style ICE
-		  channel and on the XScale with the PEEDI.
-
-		  Note that the system will appear to hang during boot if there
-		  is nothing connected to read from the DCC.
-
 	config AT91_DEBUG_LL_DBGU0
 		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 		depends on HAVE_AT91_DBGU0
@@ -108,20 +89,6 @@ choice
 		bool "Kernel low-level debugging on 9263, 9g45 and cap9"
 		depends on HAVE_AT91_DBGU1
 
-	config DEBUG_FOOTBRIDGE_COM1
-		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the 8250 at PCI COM1.
-
-	config DEBUG_DC21285_PORT
-		bool "Kernel low-level debugging messages via footbridge serial port"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port in the DC21285 (Footbridge).
-
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_DC21285_PORT
+		bool "Kernel low-level debugging messages via footbridge serial port"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port in the DC21285 (Footbridge).
+
+	config DEBUG_FOOTBRIDGE_COM1
+		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the 8250 at PCI COM1.
+
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
 		depends on ARCH_HIGHBANK
@@ -206,38 +187,42 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q.
 
-	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 0 for low-level debug"
+	config DEBUG_MSM_UART1
+		bool "Kernel low-level debugging messages via MSM UART1"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+		  their output to the first serial port on MSM devices.
 
-	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 1 for low-level debug"
+	config DEBUG_MSM_UART2
+		bool "Kernel low-level debugging messages via MSM UART2"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
+		  their output to the second serial port on MSM devices.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+	config DEBUG_MSM_UART3
+		bool "Kernel low-level debugging messages via MSM UART3"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on MSM devices.
 
-	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 2 for low-level debug"
+	config DEBUG_MSM8660_UART
+		bool "Kernel low-level debugging messages via MSM 8660 UART"
+		depends on ARCH_MSM8X60
+		select MSM_HAS_DEBUG_UART_HS
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
+		  their output to the serial port on MSM 8660 devices.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+	config DEBUG_MSM8960_UART
+		bool "Kernel low-level debugging messages via MSM 8960 UART"
+		depends on ARCH_MSM8960
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8960 devices.
 
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
@@ -255,42 +240,57 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_LL_UART_NONE
+		bool "No low-level debugging UART"
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
+		  Say Y here if your platform doesn't provide a UART option
+		  below. This relies on your platform choosing the right UART
+		  definition internally in order for low-level debugging to
+		  work.
 
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
+	config DEBUG_ICEDCC
+		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
+		  their output to the EmbeddedICE macrocell's DCC channel using
+		  co-processor 14. This is known to work on the ARM9 style ICE
+		  channel and on the XScale with the PEEDI.
+
+		  Note that the system will appear to hang during boot if there
+		  is nothing connected to read from the DCC.
 
 endchoice
 

arch/arm/include/asm/hardware/entry-macro-iomd.S

@@ -11,14 +11,6 @@
 /* IOC / IOMD based hardware */
 #include <asm/hardware/iomd.h>
 
-		.macro	disable_fiq
-		mov	r12, #ioc_base_high
-		.if	ioc_base_low
-		orr	r12, r12, #ioc_base_low
-		.endif
-		strb	r12, [r12, #0x38]	@ Disable FIQ register
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
 		ldr	\tmp, =irq_prio_h

arch/arm/include/asm/system.h

@@ -110,6 +110,7 @@ extern void cpu_init(void);
 
 void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
 
 #define UDBG_UNDEFINED	(1 << 0)
 #define UDBG_SYSCALL	(1 << 1)

arch/arm/kernel/entry-armv.S

@@ -19,7 +19,9 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
+#ifndef CONFIG_MULTI_IRQ_HANDLER
 #include <mach/entry-macro.S>
+#endif
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
@@ -1101,7 +1103,6 @@ __stubs_start:
  * get out of that mode without clobbering one register.
  */
 vector_fiq:
-	disable_fiq
 	subs	pc, lr, #4
 
 /*=============================================================================

arch/arm/kernel/entry-common.S

@@ -10,9 +10,15 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <mach/entry-macro.S>
 #include <asm/unwind.h>
 
+#ifdef CONFIG_NEED_RET_TO_USER
+#include <mach/entry-macro.S>
+#else
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+#endif
+
 #include "entry-header.S"
 
 

arch/arm/kernel/process.c

@@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void);
 
 static volatile int hlt_counter;
 
-#include <mach/system.h>
-
 void disable_hlt(void)
 {
 	hlt_counter++;
@@ -181,13 +179,17 @@ void cpu_idle_wait(void)
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
 /*
- * This is our default idle handler.  We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
  */
+
+void (*arm_pm_idle)(void);
+
 static void default_idle(void)
 {
-	if (!need_resched())
-		arch_idle();
+	if (arm_pm_idle)
+		arm_pm_idle();
+	else
+		cpu_do_idle();
 	local_irq_enable();
 }
 
@@ -215,6 +217,10 @@ void cpu_idle(void)
 				cpu_die();
 #endif
 
+			/*
+			 * We need to disable interrupts here
+			 * to ensure we don't miss a wakeup call.
+			 */
 			local_irq_disable();
 #ifdef CONFIG_PL310_ERRATA_769419
 			wmb();
@@ -222,20 +228,19 @@ void cpu_idle(void)
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();
-			} else {
+			} else if (!need_resched()) {
 				stop_critical_timings();
 				if (cpuidle_idle_call())
 					pm_idle();
 				start_critical_timings();
 				/*
-				 * This will eventually be removed - pm_idle
-				 * functions should always return with IRQs
-				 * enabled.
+				 * pm_idle functions must always
+				 * return with IRQs enabled.
 				 */
 				WARN_ON(irqs_disabled());
+			} else
 				local_irq_enable();
 		}
-		}
 		leds_event(led_idle_end);
 		rcu_idle_exit();
 		tick_nohz_idle_exit();

arch/arm/mach-at91/at91cap9.c

@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -313,6 +314,12 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
 	}
 };
 
+static void at91cap9_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -332,6 +339,7 @@ static void __init at91cap9_ioremap_registers(void)
 
 static void __init at91cap9_initialize(void)
 {
+	arm_pm_idle = at91cap9_idle;
 	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 

arch/arm/mach-at91/at91rm9200.c

@@ -289,6 +289,15 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
 	}
 };
 
+static void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
 static void at91rm9200_restart(char mode, const char *cmd)
 {
 	/*
@@ -314,6 +323,7 @@ static void __init at91rm9200_ioremap_registers(void)
 
 static void __init at91rm9200_initialize(void)
 {
+	arm_pm_idle = at91rm9200_idle;
 	arm_pm_restart = at91rm9200_restart;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)

arch/arm/mach-at91/at91sam9260.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -328,8 +329,15 @@ static void __init at91sam9260_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 }
 
+static void at91sam9260_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9260_initialize(void)
 {
+	arm_pm_idle = at91sam9260_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);

arch/arm/mach-at91/at91sam9261.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -286,8 +287,15 @@ static void __init at91sam9261_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 }
 
+static void at91sam9261_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9261_initialize(void)
 {
+	arm_pm_idle = at91sam9261_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);

arch/arm/mach-at91/at91sam9263.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -307,8 +308,15 @@ static void __init at91sam9263_ioremap_registers(void)
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
 }
 
+static void at91sam9263_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9263_initialize(void)
 {
+	arm_pm_idle = at91sam9263_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 

arch/arm/mach-at91/at91sam9g45.c

@@ -317,6 +317,12 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
 	}
 };
 
+static void at91sam9g45_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
@@ -337,6 +343,7 @@ static void __init at91sam9g45_ioremap_registers(void)
 
 static void __init at91sam9g45_initialize(void)
 {
+	arm_pm_idle = at91sam9g45_idle;
 	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 

arch/arm/mach-at91/at91sam9rl.c

@@ -11,6 +11,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -291,8 +292,15 @@ static void __init at91sam9rl_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 }
 
+static void at91sam9rl_idle(void)
+{
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
+
 static void __init at91sam9rl_initialize(void)
 {
+	arm_pm_idle = at91sam9rl_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 

arch/arm/mach-at91/at91x40.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <mach/at91x40.h>
 #include <mach/at91_st.h>
@@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk)
 	return AT91X40_MASTER_CLOCK;
 }
 
+static void at91x40_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+	cpu_do_idle();
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
+	arm_pm_idle = at91x40_idle;
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
 			| (1 << AT91X40_ID_IRQ2);
 }

arch/arm/mach-at91/include/mach/entry-macro.S

@@ -13,17 +13,11 @@
 #include <mach/hardware.h>
 #include <mach/at91_aic.h>
 
-	.macro	disable_fiq
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	ldr	\base, =at91_aic_base		@ base virtual address of AIC peripheral
 	ldr	\base, [\base]
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
 	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number

arch/arm/mach-at91/include/mach/system.h

-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-#ifdef AT91_PS
-	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Post-RM9200 processors need this in conjunction with the above
-	 * to save power when idle.
-	 */
-	cpu_do_idle();
-#endif
-}
-
-#endif

arch/arm/mach-bcmring/core.c

@@ -52,27 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-#define AMBA_DEVICE(name, initname, base, plat, size)       \
-static struct amba_device name##_device = {     \
-   .dev = {                                     \
-      .coherent_dma_mask = ~0,                  \
-      .init_name = initname,                    \
-      .platform_data = plat                     \
-   },                                           \
-   .res = {                                     \
-      .start = MM_ADDR_IO_##base,               \
-		.end = MM_ADDR_IO_##base + (size) - 1,    \
-      .flags = IORESOURCE_MEM                   \
-   },                                           \
-   .dma_mask = ~0,                              \
-   .irq = {                                     \
-      IRQ_##base                                \
-   }                                            \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",

arch/arm/mach-bcmring/include/mach/entry-macro.S

@@ -21,9 +21,6 @@
 #include <mach/hardware.h>
 #include <mach/csp/mm_io.h>
 
-		.macro	disable_fiq
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =(MM_IO_BASE_INTC0)
 		ldr	\irqstat, [\base, #0]		@ get status
@@ -77,6 +74,3 @@
 
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm

arch/arm/mach-bcmring/include/mach/system.h

-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-clps711x/common.c

@@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd)
 {
 	soft_restart(0);
 }
+
+static void clps711x_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov    r0, r0\n\
+	mov     r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+	arm_pm_idle = clps711x_idle;
+	return 0;
+}
+
+arch_initcall(clps711x_idle_init);

arch/arm/mach-clps711x/include/mach/entry-macro.S

@@ -10,15 +10,9 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-		.macro	disable_fiq
-		.endm
-
 		.macro	get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
 #if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
 #error INTSR stride != INTMR stride
 #endif

arch/arm/mach-clps711x/include/mach/system.h

-/*
- *  arch/arm/mach-clps711x/include/mach/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov	r0, r0\n\
-	mov	r0, r0");
-}
-
-#endif

arch/arm/mach-cns3xxx/include/mach/entry-macro.S

-/*
- * Low-level IRQ helper macros for Cavium Networks platforms
- *
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm

arch/arm/mach-cns3xxx/include/mach/system.h

-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-davinci/include/mach/entry-macro.S

@@ -11,17 +11,11 @@
 #include <mach/io.h>
 #include <mach/irqs.h>
 
-		.macro	disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		ldr \base, =davinci_intc_base
 		ldr \base, [\base]
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 #if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
 		ldr \tmp, =davinci_intc_type

arch/arm/mach-davinci/include/mach/system.h

-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-dove/include/mach/entry-macro.S

@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	ldr	\base, =IRQ_VIRT_BASE
 	.endm

arch/arm/mach-dove/include/mach/system.h

-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-ebsa110/core.c

@@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = {
 	&am79c961_device,
 };
 
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
 static int __init ebsa110_init(void)
 {
+	arm_pm_idle = ebsa110_idle;
 	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
 }
 

arch/arm/mach-ebsa110/include/mach/entry-macro.S

@@ -12,16 +12,10 @@
 
 #define IRQ_STAT		0xff000000	/* read */
 
-	.macro	disable_fiq
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	mov	\base, #IRQ_STAT
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
 	ldrb	\stat, [\base]			@ get interrupts
 	mov	\irqnr, #0

arch/arm/mach-ebsa110/include/mach/system.h

-/*
- *  arch/arm/mach-ebsa110/include/mach/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif

arch/arm/mach-ep93xx/core.c

@@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = {
 	.set_mctrl	= ep93xx_uart_set_mctrl,
 };
 
-static struct amba_device uart1_device = {
-	.dev		= {
-		.init_name	= "apb:uart1",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART1_PHYS_BASE,
-		.end	= EP93XX_UART1_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART1, NO_IRQ },
-	.periphid	= 0x00041010,
-};
-
-static struct amba_device uart2_device = {
-	.dev		= {
-		.init_name	= "apb:uart2",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART2_PHYS_BASE,
-		.end	= EP93XX_UART2_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART2, NO_IRQ },
-	.periphid	= 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
-static struct amba_device uart3_device = {
-	.dev		= {
-		.init_name	= "apb:uart3",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART3_PHYS_BASE,
-		.end	= EP93XX_UART3_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART3, NO_IRQ },
-	.periphid	= 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
 
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
 
 static struct resource ep93xx_rtc_resource[] = {
 	{

arch/arm/mach-ep93xx/include/mach/entry-macro.S

-/*
- * arch/arm/mach-ep93xx/include/mach/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm

arch/arm/mach-ep93xx/include/mach/system.h

-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-exynos/common.c

@@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
 	},
 };
 
-static void exynos_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init);
 int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = exynos_idle;
-
 	return device_register(&exynos4_dev);
 }
 

arch/arm/mach-exynos/dma.c

@@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device exynos4_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma0_pdata,
-	},
-	.res = {
-		.start = EXYNOS4_PA_PDMA0,
-		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
+	{IRQ_PDMA0}, &exynos4_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device exynos4_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma1_pdata,
-	},
-	.res = {
-		.start = EXYNOS4_PA_PDMA1,
-		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
+	{IRQ_PDMA1}, &exynos4_pdma1_pdata);
 
 static int __init exynos4_dma_init(void)
 {
@@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void)
 
 	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-exynos/include/mach/entry-macro.S

-/* arch/arm/mach-exynos4/include/mach/entry-macro.S
- *
- * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for EXYNOS4 platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm

arch/arm/mach-exynos/include/mach/system.h

-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-footbridge/include/mach/entry-macro.S

@@ -14,9 +14,6 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
 
-		.macro	disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		mov	\base, #dc21285_high
 		.if	dc21285_low
@@ -24,9 +21,6 @@
 		.endif
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\irqstat, [\base, #0x180]	@ get interrupts
 

arch/arm/mach-footbridge/include/mach/system.h

-/*
- *  arch/arm/mach-footbridge/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-gemini/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o devices.o gpio.o
+obj-y			:= irq.o mm.o time.o devices.o gpio.o idle.o
 
 # Board-specific support
 obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o

arch/arm/mach-gemini/idle.c

+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+	/*
+	 * Because of broken hardware we have to enable interrupts or the CPU
+	 * will never wakeup... Acctualy it is not very good to enable
+	 * interrupts first since scheduler can miss a tick, but there is
+	 * no other way around this. Platforms that needs it for power saving
+	 * should call enable_hlt() in init code, since by default it is
+	 * disabled.
+	 */
+	local_irq_enable();
+	cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+	arm_pm_idle = gemini_idle;
+	return 0;
+}
+
+arch_initcall(gemini_idle_init);

arch/arm/mach-gemini/include/mach/entry-macro.S

@@ -12,15 +12,9 @@
 
 #define IRQ_STATUS	0x14
 
-	.macro  disable_fiq
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 	ldr     \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
 	ldr     \irqnr, [\irqstat]

arch/arm/mach-gemini/include/mach/system.h

@@ -14,20 +14,6 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 
-static inline void arch_idle(void)
-{
-	/*
-	 * Because of broken hardware we have to enable interrupts or the CPU
-	 * will never wakeup... Acctualy it is not very good to enable
-	 * interrupts here since scheduler can miss a tick, but there is
-	 * no other way around this. Platforms that needs it for power saving
-	 * should call enable_hlt() in init code, since by default it is
-	 * disabled.
-	 */
-	local_irq_enable();
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	__raw_writel(RESET_GLOBAL | RESET_CPU1,

arch/arm/mach-gemini/irq.c

@@ -73,8 +73,8 @@ void __init gemini_init_irq(void)
 	unsigned int i, mode = 0, level = 0;
 
 	/*
-	 * Disable arch_idle() by default since it is buggy
-	 * For more info see arch/arm/mach-gemini/include/mach/system.h
+	 * Disable the idle handler by default since it is buggy
+	 * For more info see arch/arm/mach-gemini/idle.c
 	 */
 	disable_hlt();
 

arch/arm/mach-h720x/common.c

@@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd)
 {
 	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
 }
+
+static void h720x__idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+	arm_pm_idle = h720x__idle;
+	return 0;
+}
+
+arch_initcall(h720x_idle_init);

arch/arm/mach-h720x/include/mach/entry-macro.S

@@ -8,15 +8,9 @@
  * warranty of any kind, whether express or implied.
  */
 
-		.macro  disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 #if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
 		@ we could use the id register on H7202, but this is not

arch/arm/mach-h720x/include/mach/system.h

-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-#endif

arch/arm/mach-highbank/include/mach/entry-macro.S

-	.macro	disable_fiq
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm

arch/arm/mach-highbank/include/mach/system.h

-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-imx/mm-imx3.c

@@ -34,7 +34,6 @@ static void imx3_idle(void)
 {
 	unsigned long reg = 0;
 
-	if (!need_resched())
 	__asm__ __volatile__(
 		/* disable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
@@ -58,7 +57,6 @@ static void imx3_idle(void)
 		"orr %0, %0, #0x00000004\n"
 		"mcr p15, 0, %0, c1, c0, 0\n"
 		: "=r" (reg));
-	local_irq_enable();
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@ void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
+	arm_pm_idle = imx3_idle;
 }
 
 void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@ void __init imx35_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	pm_idle = imx3_idle;
+	arm_pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 

arch/arm/mach-imx/mm-imx5.c

@@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk;
 
 static void imx5_idle(void)
 {
-	if (!need_resched()) {
 	/* gpc clock is needed for SRPG */
 	if (gpc_dvfs_clk == NULL) {
 		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
 		if (IS_ERR(gpc_dvfs_clk))
-				goto err0;
+			return;
 	}
 	clk_enable(gpc_dvfs_clk);
 	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-		if (tzic_enable_wake())
-			goto err1;
+	if (tzic_enable_wake() != 0)
 		cpu_do_idle();
-err1:
 	clk_disable(gpc_dvfs_clk);
-	}
-err0:
-	local_irq_enable();
 }
 
 /*
@@ -108,7 +102,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	pm_idle = imx5_idle;
+	arm_pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)

arch/arm/mach-imx/pm-imx27.c

@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 #include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state)
 		cscr &= 0xFFFFFFFC;
 		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		/* Executes WFI */
-		arch_idle();
+		cpu_do_idle();
 		break;
 
 	default:

arch/arm/mach-integrator/core.c

@@ -35,67 +35,23 @@
 
 static struct amba_pl010_data integrator_uart_data;
 
-static struct amba_device rtc_device = {
-	.dev		= {
-		.init_name = "mb:15",
-	},
-	.res		= {
-		.start	= INTEGRATOR_RTC_BASE,
-		.end	= INTEGRATOR_RTC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
+#define KMI0_IRQ		{ IRQ_KMIINT0 }
+#define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static struct amba_device uart0_device = {
-	.dev		= {
-		.init_name = "mb:16",
-		.platform_data = &integrator_uart_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_UART0_BASE,
-		.end	= INTEGRATOR_UART0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static struct amba_device uart1_device = {
-	.dev		= {
-		.init_name = "mb:17",
-		.platform_data = &integrator_uart_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_UART1_BASE,
-		.end	= INTEGRATOR_UART1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi0_device = {
-	.dev		= {
-		.init_name = "mb:18",
-	},
-	.res		= {
-		.start	= KMI0_BASE,
-		.end	= KMI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi1_device = {
-	.dev		= {
-		.init_name = "mb:19",
-	},
-	.res		= {
-		.start	= KMI1_BASE,
-		.end	= KMI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,

arch/arm/mach-integrator/impd1.c

@@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev)
 
 		pc_base = dev->resource.start + idev->offset;
 
-		d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+		d = amba_device_alloc(NULL, pc_base, SZ_4K);
 		if (!d)
 			continue;
 
 		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
-		d->res.start	= dev->resource.start + idev->offset;
-		d->res.end	= d->res.start + SZ_4K - 1;
-		d->res.flags	= IORESOURCE_MEM;
 		d->irq[0]	= dev->irq;
 		d->irq[1]	= dev->irq;
 		d->periphid	= idev->id;
 		d->dev.platform_data = idev->platform_data;
 
-		ret = amba_device_register(d, &dev->resource);
+		ret = amba_device_add(d, &dev->resource);
 		if (ret) {
 			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			kfree(d);
+			amba_device_put(d);
 		}
 	}
 

arch/arm/mach-integrator/include/mach/entry-macro.S

@@ -11,15 +11,9 @@
 #include <mach/platform.h>
 #include <mach/irqs.h>
 
- 		.macro	disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 /* FIXME: should not be using soo many LDRs here */
 		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)

arch/arm/mach-integrator/include/mach/system.h

-/*
- *  arch/arm/mach-integrator/include/mach/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-integrator/integrator_cp.c

@@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = {
 	.gpio_cd	= -1,
 };
 
-static struct amba_device mmc_device = {
-	.dev		= {
-		.init_name = "mb:1c",
-		.platform_data = &mmc_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_CP_MMC_BASE,
-		.end	= INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
-	.periphid	= 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static struct amba_device aaci_device = {
-	.dev		= {
-		.init_name = "mb:1d",
-	},
-	.res		= {
-		.start	= INTEGRATOR_CP_AACI_BASE,
-		.end	= INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_CP_AACIINT, NO_IRQ },
-	.periphid	= 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
 /*
@@ -425,21 +407,8 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static struct amba_device clcd_device = {
-	.dev		= {
-		.init_name = "mb:c0",
-		.coherent_dma_mask = ~0,
-		.platform_data = &clcd_data,
-	},
-	.res		= {
-		.start	= INTCP_PA_CLCD_BASE,
-		.end	= INTCP_PA_CLCD_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.dma_mask	= ~0,
-	.irq		= { IRQ_CP_CLCDCINT, NO_IRQ },
-	.periphid	= 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&mmc_device,

arch/arm/mach-iop13xx/include/mach/entry-macro.S

@@ -16,9 +16,6 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  */
-	.macro  disable_fiq
-	.endm
-
 	.macro get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c15, c1, 0
 	orr	\tmp, \tmp, #(1 << 6)

arch/arm/mach-iop13xx/include/mach/system.h

-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-iop32x/include/mach/entry-macro.S

@@ -9,9 +9,6 @@
  */
 #include <mach/iop32x.h>
 
-	.macro	disable_fiq
-	.endm
-
 	.macro get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c15, c1, 0
 	orr	\tmp, \tmp, #(1 << 6)

arch/arm/mach-iop32x/include/mach/system.h

-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-iop33x/include/mach/entry-macro.S

@@ -9,9 +9,6 @@
  */
 #include <mach/iop33x.h>
 
-	.macro	disable_fiq
-	.endm
-
 	.macro get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c15, c1, 0
 	orr	\tmp, \tmp, #(1 << 6)

arch/arm/mach-iop33x/include/mach/system.h

-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-ixp2000/include/mach/entry-macro.S

@@ -9,15 +9,9 @@
  */
 #include <mach/irqs.h>
 
-		.macro  disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 
 		mov	\irqnr, #0x0              @clear out irqnr as default

arch/arm/mach-ixp2000/include/mach/system.h

-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}

arch/arm/mach-ixp23xx/core.c

@@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = {
 
 void __init ixp23xx_sys_init(void)
 {
+	/* by default, the idle code is disabled */
+	disable_hlt();
+
 	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
 	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
 }

arch/arm/mach-ixp23xx/include/mach/entry-macro.S

@@ -2,15 +2,9 @@
  * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
  */
 
-		.macro	disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
 		ldr	\irqnr, [\irqnr]	@ get interrupt number

arch/arm/mach-ixp23xx/include/mach/system.h

-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle();
-#endif
-}

arch/arm/mach-ixp4xx/common.c

@@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void)
 {
 	int i = 0;
 
+	/*
+	 * ixp4xx does not implement the XScale PWRMODE register
+	 * so it must not call cpu_do_idle().
+	 */
+	disable_hlt();
+
 	/* Route all sources to IRQ instead of FIQ */
 	*IXP4XX_ICLR = 0x0;
 

arch/arm/mach-ixp4xx/include/mach/entry-macro.S

@@ -9,15 +9,9 @@
  */
 #include <mach/hardware.h>
 
-		.macro	disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
 		ldr	\irqstat, [\irqstat]		@ get interrupts

arch/arm/mach-ixp4xx/include/mach/system.h

-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
-	/* ixp4xx does not implement the XScale PWRMODE register,
-	 * so it must not call cpu_do_idle() here.
-	 */
-#if 0
-	cpu_do_idle();
-#endif
-}

arch/arm/mach-kirkwood/include/mach/entry-macro.S

@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	ldr	\base, =IRQ_VIRT_BASE
 	.endm

arch/arm/mach-kirkwood/include/mach/system.h

-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-ks8695/include/mach/entry-macro.S

@@ -14,16 +14,10 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
-	.macro	disable_fiq
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
 

arch/arm/mach-ks8695/include/mach/system.h

-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks,
-	 */
-	cpu_do_idle();
-
-}
-
-#endif

arch/arm/mach-lpc32xx/include/mach/entry-macro.S

@@ -21,16 +21,10 @@
 
 #define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
 
-	.macro	disable_fiq
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 /*
  * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
  * as set if an interrupt is pending.

arch/arm/mach-lpc32xx/include/mach/system.h

-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-lpc32xx/phy3250.c

@@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = {
 	.remove		= lpc32xx_clcd_remove,
 };
 
-static struct amba_device lpc32xx_clcd_device = {
-	.dev				= {
-		.coherent_dma_mask	= ~0,
-		.init_name		= "dev:clcd",
-		.platform_data		= &lpc32xx_clcd_data,
-	},
-	.res				= {
-		.start			= LPC32XX_LCD_BASE,
-		.end			= (LPC32XX_LCD_BASE + SZ_4K - 1),
-		.flags			= IORESOURCE_MEM,
-	},
-	.dma_mask			= ~0,
-	.irq				= {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+	LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
 
 /*
  * AMBA SSP (SPI)
@@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
 	.enable_dma		= 0,
 };
 
-static struct amba_device lpc32xx_ssp0_device = {
-	.dev				= {
-		.coherent_dma_mask	= ~0,
-		.init_name		= "dev:ssp0",
-		.platform_data		= &lpc32xx_ssp0_data,
-	},
-	.res				= {
-		.start			= LPC32XX_SSP0_BASE,
-		.end			= (LPC32XX_SSP0_BASE + SZ_4K - 1),
-		.flags			= IORESOURCE_MEM,
-	},
-	.dma_mask			= ~0,
-	.irq				= {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+	LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
 
 /* AT25 driver registration */
 static int __init phy3250_spi_board_register(void)

arch/arm/mach-mmp/include/mach/entry-macro.S

@@ -8,12 +8,6 @@
 
 #include <mach/regs-icu.h>
 
-	.macro	disable_fiq
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro	get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
 	and	\tmp, \tmp, #0xff00

arch/arm/mach-mmp/include/mach/system.h

-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */

arch/arm/mach-msm/idle.S → arch/arm/mach-msm/idle.c

-/* arch/arm/mach-msm/include/mach/idle.S
+/* arch/arm/mach-msm/idle.c
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
@@ -16,21 +16,34 @@
  *
  */
 
-#include <linux/linkage.h>
-#include <asm/assembler.h>
+#include <linux/init.h>
+#include <asm/system.h>
 
-ENTRY(arch_idle)
+static void msm_idle(void)
+{
 #ifdef CONFIG_MSM7X00A_IDLE
-	mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */
-	bic     r0, r1, #(1 << 2)        /* clear dcache bit   */
-	bic     r0, r0, #(1 << 12)       /* clear icache bit   */
-	mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */
+	asm volatile (
 
-	mov     r0, #0                   /* prepare wfi value  */
-	mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */
-	mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */
-	mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */
+	"mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
+	"bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
+	"bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
+	"mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
 
-	mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */
+	"mov     r0, #0                   /* prepare wfi value  */ \n\t"
+	"mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
+	"mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
+	"mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
+
+	"mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
+
+	: : : "r0","r1" );
 #endif
-	mov     pc, lr
+}
+
+static int __init msm_idle_init(void)
+{
+	arm_pm_idle = msm_idle;
+	return 0;
+}
+
+arch_initcall(msm_idle_init);

arch/arm/mach-msm/include/mach/entry-macro.S

@@ -16,12 +16,6 @@
  *
  */
 
-	.macro	disable_fiq
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
 #if !defined(CONFIG_ARM_GIC)
 #include <mach/msm_iomap.h>
 

arch/arm/mach-msm/include/mach/system.h

@@ -12,7 +12,6 @@
  * GNU General Public License for more details.
  *
  */
-void arch_idle(void);
 
 /* low level hardware reset hook -- for example, hitting the
  * PSHOLD line on the PMIC to hard reset the system

arch/arm/mach-mv78xx0/include/mach/entry-macro.S

@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro  get_irqnr_preamble, base, tmp
 	ldr	\base, =IRQ_VIRT_BASE
 	.endm

arch/arm/mach-mv78xx0/include/mach/system.h

-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-mxs/devices.c

@@ -77,16 +77,18 @@ struct platform_device *__init mxs_add_platform_device_dmamask(
 
 int __init mxs_add_amba_device(const struct amba_device *dev)
 {
-	struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+	struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+		dev->res.start, resource_size(&dev->res));
 
 	if (!adev) {
 		pr_err("%s: failed to allocate memory", __func__);
 		return -ENOMEM;
 	}
 
-	*adev = *dev;
+	adev->irq[0] = dev->irq[0];
+	adev->irq[1] = dev->irq[1];
 
-	return amba_device_register(adev, &iomem_resource);
+	return amba_device_add(adev, &iomem_resource);
 }
 
 struct device mxs_apbh_bus = {

arch/arm/mach-mxs/devices/amba-duart.c

@@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = {		\
 		.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,	\
 		.flags = IORESOURCE_MEM,			\
 	},							\
-	.irq = {soc ## _INT_DUART, NO_IRQ},			\
+	.irq = {soc ## _INT_DUART},				\
 }
 
 #ifdef CONFIG_SOC_IMX23

arch/arm/mach-mxs/include/mach/entry-macro.S

@@ -23,9 +23,6 @@
 #define MXS_ICOLL_VBASE		MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
 #define HW_ICOLL_STAT_OFFSET	0x70
 
-	.macro	disable_fiq
-	.endm
-
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	ldr	\irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
 	cmp	\irqnr, #0x7F
@@ -36,6 +33,3 @@
 	.macro  get_irqnr_preamble, base, tmp
 	ldr	\base, =MXS_ICOLL_VBASE
 	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm

arch/arm/mach-mxs/include/mach/system.h

-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */

arch/arm/mach-mxs/pm.c

@@ -15,13 +15,12 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 
 static int mxs_suspend_enter(suspend_state_t state)
 {
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		arch_idle();
+		cpu_do_idle();
 		break;
 
 	default:

arch/arm/mach-netx/fb.c

@@ -92,18 +92,7 @@ void clk_put(struct clk *clk)
 {
 }
 
-static struct amba_device fb_device = {
-	.dev		= {
-		.init_name = "fb",
-		.coherent_dma_mask = ~0,
-	},
-	.res		= {
-		.start	= 0x00104000,
-		.end	= 0x00104fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
 
 int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
 {

arch/arm/mach-netx/include/mach/entry-macro.S

-/*
- * arch/arm/mach-netx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm

arch/arm/mach-netx/include/mach/system.h

-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
-

arch/arm/mach-nomadik/board-nhk8815.c

@@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void)
 #endif
 }
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+	{ IRQ_UART0 }, NULL);
 
-static struct amba_device uart0_device = {
-	.dev = { .init_name = "uart0" },
-	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
-	.irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
-	.dev = { .init_name = "uart1" },
-	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
-	.irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+	{ IRQ_UART1 }, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,

arch/arm/mach-nomadik/cpu-8815.c

@@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = {
 	GPIO_DEVICE(3),
 };
 
-static struct amba_device cpu8815_amba_rng = {
-	.dev = {
-		.init_name = "rng",
-	},
-	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
 
 static struct platform_device *platform_devs[] __initdata = {
 	cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = {
 };
 
 static struct amba_device *amba_devs[] __initdata = {
-	&cpu8815_amba_rng
+	&cpu8815_amba_rng_device
 };
 
 static int __init cpu8815_init(void)

arch/arm/mach-nomadik/include/mach/entry-macro.S

-/*
- * Low-level IRQ helper macros for Nomadik platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm

arch/arm/mach-nomadik/include/mach/system.h

-/*
- *  mach-nomadik/include/mach/system.h
- *
- *  Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif

arch/arm/mach-omap1/include/mach/entry-macro.S

@@ -14,15 +14,9 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
- 		.macro	disable_fiq
-		.endm
-
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
 		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]