Commit 2ce30137 authored by Banajit Goswami's avatar Banajit Goswami Committed by Kukjin Kim

ARM: SAMSUNG: Move PWM device definition from plat-s3c24xx to plat-samsung

This patch does the following:-
1. It moves file pwm.c from plat-s3c24xx to plat-samsung. This will
   enable all machines with Samsung SoCs to make use of the same code.
2. The device definitions have been separated to a new file dev-pwm.c
   for better clarity and structure.
3. It will enable all Samsung S3C and S5P series SoC's to use common
   PWM Kconfig definition.
Signed-off-by: default avatarBanajit Goswami <banajit.g@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent dd9c1549
...@@ -231,7 +231,7 @@ config MACH_HMT ...@@ -231,7 +231,7 @@ config MACH_HMT
select S3C_DEV_NAND select S3C_DEV_NAND
select S3C_DEV_USB_HOST select S3C_DEV_USB_HOST
select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_FB_24BPP
select HAVE_PWM select SAMSUNG_DEV_PWM
help help
Machine support for the Airgoo HMT Machine support for the Airgoo HMT
...@@ -249,8 +249,8 @@ config MACH_SMARTQ ...@@ -249,8 +249,8 @@ config MACH_SMARTQ
select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_FB_24BPP
select SAMSUNG_DEV_ADC select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS select SAMSUNG_DEV_TS
select HAVE_PWM
help help
Shared machine support for SmartQ 5/7 Shared machine support for SmartQ 5/7
......
...@@ -56,13 +56,6 @@ config S3C24XX_DCLK ...@@ -56,13 +56,6 @@ config S3C24XX_DCLK
help help
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
help
Support for exporting the PWM timer blocks via the pwm device
system.
# gpio configurations # gpio configurations
config S3C24XX_GPIO_EXTRA config S3C24XX_GPIO_EXTRA
......
...@@ -273,6 +273,19 @@ config SAMSUNG_DEV_KEYPAD ...@@ -273,6 +273,19 @@ config SAMSUNG_DEV_KEYPAD
help help
Compile in platform device definitions for keypad Compile in platform device definitions for keypad
config SAMSUNG_DEV_PWM
bool
default y if ARCH_S3C2410
help
Compile in platform device definition for PWM Timer
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
help
Support for exporting the PWM timer blocks via the pwm device
system
# DMA # DMA
config S3C_DMA config S3C_DMA
......
...@@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o ...@@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o
# DMA support # DMA support
......
/* linux/arch/arm/plat-samsung/dev-pwm.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (c) 2007 Ben Dooks
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
*
* S3C series device definition for the PWM timer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <plat/devs.h>
#define TIMER_RESOURCE_SIZE (1)
#define TIMER_RESOURCE(_tmr, _irq) \
(struct resource [TIMER_RESOURCE_SIZE]) { \
[0] = { \
.start = _irq, \
.end = _irq, \
.flags = IORESOURCE_IRQ \
} \
}
#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
.name = "s3c24xx-pwm", \
.id = _tmr_no, \
.num_resources = TIMER_RESOURCE_SIZE, \
.resource = TIMER_RESOURCE(_tmr_no, _irq), \
/*
* since we already have an static mapping for the timer,
* we do not bother setting any IO resource for the base.
*/
struct platform_device s3c_device_timer[] = {
[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
};
EXPORT_SYMBOL(s3c_device_timer);
...@@ -20,10 +20,8 @@ ...@@ -20,10 +20,8 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/pwm.h> #include <linux/pwm.h>
#include <mach/irqs.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h> #include <plat/regs-timer.h>
struct pwm_device { struct pwm_device {
...@@ -47,37 +45,6 @@ struct pwm_device { ...@@ -47,37 +45,6 @@ struct pwm_device {
static struct clk *clk_scaler[2]; static struct clk *clk_scaler[2];
/* Standard setup for a timer block. */
#define TIMER_RESOURCE_SIZE (1)
#define TIMER_RESOURCE(_tmr, _irq) \
(struct resource [TIMER_RESOURCE_SIZE]) { \
[0] = { \
.start = _irq, \
.end = _irq, \
.flags = IORESOURCE_IRQ \
} \
}
#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
.name = "s3c24xx-pwm", \
.id = _tmr_no, \
.num_resources = TIMER_RESOURCE_SIZE, \
.resource = TIMER_RESOURCE(_tmr_no, _irq), \
/* since we already have an static mapping for the timer, we do not
* bother setting any IO resource for the base.
*/
struct platform_device s3c_device_timer[] = {
[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
};
static inline int pwm_is_tdiv(struct pwm_device *pwm) static inline int pwm_is_tdiv(struct pwm_device *pwm)
{ {
return clk_get_parent(pwm->clk) == pwm->clk_div; return clk_get_parent(pwm->clk) == pwm->clk_div;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment