CS89x0: Add networking support for QQ2440

QQ2440 is only another non-ISA board using CS89x0. This patch adds the
minimum bits required to make QQ2440 work with CS89x0.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/Kconfig

@@ -1498,7 +1498,7 @@ config FORCEDETH
 config CS89x0
 	tristate "CS89x0 support"
 	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || MACH_MX31ADS)
+		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
@@ -1512,7 +1512,7 @@ config CS89x0
 config CS89x0_NONISA_IRQ
 	def_bool y
 	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
+	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
 
 config TC35815
 	tristate "TOSHIBA TC35815 Ethernet support"

drivers/net/cs89x0.c

@@ -95,6 +95,9 @@
   Dmitry Pervushin  : dpervushin@ru.mvista.com
                     : PNX010X platform support
 
+  Domenico Andreoli : cavokz@gmail.com
+                    : QQ2440 platform support
+
 */
 
 /* Always include 'config.h' first in case the user wants to turn on
@@ -176,6 +179,10 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_IXDP2X01)
 static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_MACH_QQ2440)
+#include <mach/qq2440.h>
+static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
+static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
 #elif defined(CONFIG_MACH_MX31ADS)
 #include <mach/board-mx31ads.h>
 static unsigned int netcard_portlist[] __used __initdata = {
@@ -521,6 +528,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 #endif
 		lp->force = g_cs89x0_media__force;
 #endif
+
+#if defined(CONFIG_MACH_QQ2440)
+		lp->force |= FORCE_RJ45 | FORCE_FULL;
+#endif
         }
 
 	/* Grab the region so we can find another board if autoIRQ fails. */