Commit 2cf36834 authored by Yi Li's avatar Yi Li Committed by Linus Torvalds

Blackfin SPI Driver: fix bug - spi controller driver does not assert/deassert CS correctly

This bug can be observed when two SPI devices are sharing the spi bus: One
device is set as SPI CS 7, another one is using SPI CS 4.

In spi_bfin5xx.c: cs_active(), cs_deactive() are used to control SPI_FLG
register.  From the debug bellow:

cs_active: flag: 0x7f91, chip->flag: 0x7f80, cs: 7
cs_active: flag: 0xef91, chip->flag: 0xef10, cs: 4

When device A (cs_7) activate CS 7, SPI_FLG is set as 0x7f91 (however,
SPI_FLG should be set as 0x7f80, or 0x6f91 if in broadcast mode).

Due to some HW bug (very possibly), if SPI_FLG is set as 0x7f91, SPISSEL7
is asserted, however SPISSEL4 will be asserted too (I can see this using
the scope).  This is unreasonable according to HRM.
Signed-off-by: default avatarYi Li <yi.li@analog.com>
Signed-off-by: default avatarBryan Wu <cooloney@kernel.org>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent a963ea83
......@@ -189,6 +189,7 @@ static void cs_deactive(struct driver_data *drv_data, struct chip_data *chip)
{
u16 flag = read_FLAG(drv_data);
flag &= ~chip->flag;
flag |= (chip->flag << 8);
write_FLAG(drv_data, flag);
......@@ -1036,7 +1037,6 @@ static int setup(struct spi_device *spi)
struct bfin5xx_spi_chip *chip_info = NULL;
struct chip_data *chip;
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
u8 spi_flg;
/* Abort device setup if requested features are not supported */
if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
......@@ -1119,8 +1119,7 @@ static int setup(struct spi_device *spi)
* SPI_BAUD, not the real baudrate
*/
chip->baud = hz_to_spi_baud(spi->max_speed_hz);
spi_flg = ~(1 << (spi->chip_select));
chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
chip->flag = 1 << (spi->chip_select);
chip->chip_select_num = spi->chip_select;
switch (chip->bits_per_word) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment