regmap: Fixup the kernel-doc comments on functions/structures

Most of the kernel-doc comments in regmap don't actually generate
correctly. This patch fixes up a few common issues, corrects some typos
and adds some missing argument descriptions.

The most common issues being using a : after the function name which
causes the short description to not render correctly and not separating
the long and short descriptions of the function. There are quite a few
instances of arguments not being described or given the wrong name as
well.

This patch doesn't fixup functions/structures that are currently missing
descriptions.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/base/regmap/regcache.c

@@ -224,7 +224,7 @@ void regcache_exit(struct regmap *map)
 }
 
 /**
- * regcache_read: Fetch the value of a given register from the cache.
+ * regcache_read - Fetch the value of a given register from the cache.
  *
  * @map: map to configure.
  * @reg: The register index.
@@ -255,7 +255,7 @@ int regcache_read(struct regmap *map,
 }
 
 /**
- * regcache_write: Set the value of a given register in the cache.
+ * regcache_write - Set the value of a given register in the cache.
  *
  * @map: map to configure.
  * @reg: The register index.
@@ -328,7 +328,7 @@ static int regcache_default_sync(struct regmap *map, unsigned int min,
 }
 
 /**
- * regcache_sync: Sync the register cache with the hardware.
+ * regcache_sync - Sync the register cache with the hardware.
  *
  * @map: map to configure.
  *
@@ -396,7 +396,7 @@ int regcache_sync(struct regmap *map)
 EXPORT_SYMBOL_GPL(regcache_sync);
 
 /**
- * regcache_sync_region: Sync part  of the register cache with the hardware.
+ * regcache_sync_region - Sync part  of the register cache with the hardware.
  *
  * @map: map to sync.
  * @min: first register to sync
@@ -452,7 +452,7 @@ int regcache_sync_region(struct regmap *map, unsigned int min,
 EXPORT_SYMBOL_GPL(regcache_sync_region);
 
 /**
- * regcache_drop_region: Discard part of the register cache
+ * regcache_drop_region - Discard part of the register cache
  *
  * @map: map to operate on
  * @min: first register to discard
@@ -483,10 +483,10 @@ int regcache_drop_region(struct regmap *map, unsigned int min,
 EXPORT_SYMBOL_GPL(regcache_drop_region);
 
 /**
- * regcache_cache_only: Put a register map into cache only mode
+ * regcache_cache_only - Put a register map into cache only mode
  *
  * @map: map to configure
- * @cache_only: flag if changes should be written to the hardware
+ * @enable: flag if changes should be written to the hardware
  *
  * When a register map is marked as cache only writes to the register
  * map API will only update the register cache, they will not cause
@@ -505,7 +505,7 @@ void regcache_cache_only(struct regmap *map, bool enable)
 EXPORT_SYMBOL_GPL(regcache_cache_only);
 
 /**
- * regcache_mark_dirty: Indicate that HW registers were reset to default values
+ * regcache_mark_dirty - Indicate that HW registers were reset to default values
  *
  * @map: map to mark
  *
@@ -527,10 +527,10 @@ void regcache_mark_dirty(struct regmap *map)
 EXPORT_SYMBOL_GPL(regcache_mark_dirty);
 
 /**
- * regcache_cache_bypass: Put a register map into cache bypass mode
+ * regcache_cache_bypass - Put a register map into cache bypass mode
  *
  * @map: map to configure
- * @cache_bypass: flag if changes should not be written to the cache
+ * @enable: flag if changes should not be written to the cache
  *
  * When a register map is marked with the cache bypass option, writes
  * to the register map API will only update the hardware and not the

drivers/base/regmap/regmap-irq.c

@@ -398,13 +398,14 @@ static const struct irq_domain_ops regmap_domain_ops = {
 };
 
 /**
- * regmap_add_irq_chip(): Use standard regmap IRQ controller handling
+ * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
  *
- * map:       The regmap for the device.
- * irq:       The IRQ the device uses to signal interrupts
- * irq_flags: The IRQF_ flags to use for the primary interrupt.
- * chip:      Configuration for the interrupt controller.
- * data:      Runtime data structure for the controller, allocated on success
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
  *
  * Returns 0 on success or an errno on failure.
  *
@@ -659,12 +660,12 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
 
 /**
- * regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip
+ * regmap_del_irq_chip() - Stop interrupt handling for a regmap IRQ chip
  *
  * @irq: Primary IRQ for the device
- * @d:   regmap_irq_chip_data allocated by regmap_add_irq_chip()
+ * @d: &regmap_irq_chip_data allocated by regmap_add_irq_chip()
  *
- * This function also dispose all mapped irq on chip.
+ * This function also disposes of all mapped IRQs on the chip.
  */
 void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
 {
@@ -723,18 +724,19 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
 }
 
 /**
- * devm_regmap_add_irq_chip(): Resource manager regmap_add_irq_chip()
+ * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
  *
  * @dev: The device pointer on which irq_chip belongs to.
  * @map: The regmap for the device.
  * @irq: The IRQ the device uses to signal interrupts
  * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
  * @chip: Configuration for the interrupt controller.
  * @data: Runtime data structure for the controller, allocated on success
  *
  * Returns 0 on success or an errno on failure.
  *
- * The regmap_irq_chip data automatically be released when the device is
+ * The &regmap_irq_chip_data will be automatically released when the device is
  * unbound.
  */
 int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
@@ -765,11 +767,13 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
 
 /**
- * devm_regmap_del_irq_chip(): Resource managed regmap_del_irq_chip()
+ * devm_regmap_del_irq_chip() - Resource managed regmap_del_irq_chip()
  *
  * @dev: Device for which which resource was allocated.
- * @irq: Primary IRQ for the device
- * @d:   regmap_irq_chip_data allocated by regmap_add_irq_chip()
+ * @irq: Primary IRQ for the device.
+ * @data: &regmap_irq_chip_data allocated by regmap_add_irq_chip().
+ *
+ * A resource managed version of regmap_del_irq_chip().
  */
 void devm_regmap_del_irq_chip(struct device *dev, int irq,
 			      struct regmap_irq_chip_data *data)
@@ -786,11 +790,11 @@ void devm_regmap_del_irq_chip(struct device *dev, int irq,
 EXPORT_SYMBOL_GPL(devm_regmap_del_irq_chip);
 
 /**
- * regmap_irq_chip_get_base(): Retrieve interrupt base for a regmap IRQ chip
+ * regmap_irq_chip_get_base() - Retrieve interrupt base for a regmap IRQ chip
  *
- * Useful for drivers to request their own IRQs.
+ * @data: regmap irq controller to operate on.
  *
- * @data: regmap_irq controller to operate on.
+ * Useful for drivers to request their own IRQs.
  */
 int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
 {
@@ -800,12 +804,12 @@ int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
 EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base);
 
 /**
- * regmap_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
+ * regmap_irq_get_virq() - Map an interrupt on a chip to a virtual IRQ
  *
- * Useful for drivers to request their own IRQs.
+ * @data: regmap irq controller to operate on.
+ * @irq: index of the interrupt requested in the chip IRQs.
  *
- * @data: regmap_irq controller to operate on.
- * @irq: index of the interrupt requested in the chip IRQs
+ * Useful for drivers to request their own IRQs.
  */
 int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
 {
@@ -818,14 +822,14 @@ int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
 EXPORT_SYMBOL_GPL(regmap_irq_get_virq);
 
 /**
- * regmap_irq_get_domain(): Retrieve the irq_domain for the chip
+ * regmap_irq_get_domain() - Retrieve the irq_domain for the chip
+ *
+ * @data: regmap_irq controller to operate on.
  *
  * Useful for drivers to request their own IRQs and for integration
  * with subsystems.  For ease of integration NULL is accepted as a
  * domain, allowing devices to just call this even if no domain is
  * allocated.
- *
- * @data: regmap_irq controller to operate on.
  */
 struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data)
 {