Commit 2d1a3871 authored by Linus Torvalds's avatar Linus Torvalds

Merge http://gkernel.bkbits.net/irda-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
parents 9959faa8 d1230b63
...@@ -55,12 +55,22 @@ CONFIG_NSC_FIR ...@@ -55,12 +55,22 @@ CONFIG_NSC_FIR
<file:Documentation/modules.txt>. The module will be called <file:Documentation/modules.txt>. The module will be called
nsc-ircc.o. nsc-ircc.o.
CONFIG_TOSHIBA_FIR CONFIG_TOSHIBA_OLD
Say Y here if you want to build support for the Toshiba Type-O IR Say Y here if you want to build support for the Toshiba Type-O IR
chipset. This chipset is used by the Toshiba Libretto 100CT, and chipset. This chipset is used by the Toshiba Libretto 100CT, and
many more laptops. If you want to compile it as a module, say M many more laptops. This driver is obsolete, will no more be
here and read <file:Documentation/modules.txt>. The module will be maintained and will be removed in favor of the new driver.
called toshoboe.o. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called toshoboe.o.
CONFIG_TOSHIBA_FIR
Say Y here if you want to build support for the Toshiba Type-O IR
and Donau oboe chipsets. These chipsets are used by the Toshiba
Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called donauboe.o.
CONFIG_SMC_IRCC_FIR CONFIG_SMC_IRCC_FIR
Say Y here if you want to build support for the SMC Infrared Say Y here if you want to build support for the SMC Infrared
...@@ -165,3 +175,18 @@ CONFIG_ACT200L_DONGLE ...@@ -165,3 +175,18 @@ CONFIG_ACT200L_DONGLE
the normal 9-pin serial port connector, and can currently only be the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for ACTiSYS IR-200L dongles used by IrTTY. To activate support for ACTiSYS IR-200L dongles
you will have to start irattach like this: "irattach -d act200l". you will have to start irattach like this: "irattach -d act200l".
Mobile Action MA600 dongle (Experimental)
CONFIG_MA600_DONGLE
Say Y here if you want to build support for the Mobile Action MA600
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The MA600 dongle attaches to
the normal 9-pin serial port connector, and can currently only be
tested on IrCOMM. To activate support for MA600 dongles you will
have to insert "irattach -d ma600" in the /etc/irda/drivers script.
Note: irutils 0.9.15 requires no modification. irutils 0.9.9 needs
modification. For more information, download the following tar gzip
file.
There is a pre-compiled module on
<http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz>
...@@ -28,6 +28,7 @@ comment 'FIR device drivers' ...@@ -28,6 +28,7 @@ comment 'FIR device drivers'
dep_tristate 'IrDA USB dongles (EXPERIMENTAL)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate 'IrDA USB dongles (EXPERIMENTAL)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA
dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA
dep_tristate 'Toshiba Type-O IR Port (old driver)' CONFIG_TOSHIBA_OLD $CONFIG_IRDA
dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
dep_tristate 'SMC IrCC (EXPERIMENTAL)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA dep_tristate 'SMC IrCC (EXPERIMENTAL)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
......
...@@ -13,7 +13,8 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o ...@@ -13,7 +13,8 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o
obj-$(CONFIG_NSC_FIR) += nsc-ircc.o obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o
obj-$(CONFIG_TOSHIBA_FIR) += toshoboe.o obj-$(CONFIG_TOSHIBA_OLD) += toshoboe.o
obj-$(CONFIG_TOSHIBA_FIR) += donauboe.o
obj-$(CONFIG_SMC_IRCC_FIR) += smc-ircc.o irport.o obj-$(CONFIG_SMC_IRCC_FIR) += smc-ircc.o irport.o
obj-$(CONFIG_ALI_FIR) += ali-ircc.o obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -28,6 +28,6 @@ static inline __u16 irda_fcs(__u16 fcs, __u8 c) ...@@ -28,6 +28,6 @@ static inline __u16 irda_fcs(__u16 fcs, __u8 c)
} }
/* Recompute the FCS with len bytes appended. */ /* Recompute the FCS with len bytes appended. */
unsigned short crc_calc( __u16 fcs, __u8 const *buf, size_t len); unsigned short irda_calc_crc16( __u16 fcs, __u8 const *buf, size_t len);
#endif #endif
...@@ -48,7 +48,9 @@ ...@@ -48,7 +48,9 @@
/* This is used as an initial value to max_header_size before the proper /* This is used as an initial value to max_header_size before the proper
* value is filled in (5 for ttp, 4 for lmp). This allow us to detect * value is filled in (5 for ttp, 4 for lmp). This allow us to detect
* the state of the underlying connection. - Jean II */ * the state of the underlying connection. - Jean II */
#define IRCOMM_TTY_HDR_UNITIALISED 32 #define IRCOMM_TTY_HDR_UNINITIALISED 16
/* Same for payload size. See qos.c for the smallest max data size */
#define IRCOMM_TTY_DATA_UNINITIALISED (64 - IRCOMM_TTY_HDR_UNINITIALISED)
/* /*
* IrCOMM TTY driver state * IrCOMM TTY driver state
...@@ -83,6 +85,7 @@ struct ircomm_tty_cb { ...@@ -83,6 +85,7 @@ struct ircomm_tty_cb {
__u32 max_data_size; /* Max data we can transmit in one packet */ __u32 max_data_size; /* Max data we can transmit in one packet */
__u32 max_header_size; /* The amount of header space we must reserve */ __u32 max_header_size; /* The amount of header space we must reserve */
__u32 tx_data_size; /* Max data size of current tx_skb */
struct iriap_cb *iriap; /* Instance used for querying remote IAS */ struct iriap_cb *iriap; /* Instance used for querying remote IAS */
struct ias_object* obj; struct ias_object* obj;
......
This diff is collapsed.
...@@ -57,7 +57,7 @@ __u16 const irda_crc16_table[256] = ...@@ -57,7 +57,7 @@ __u16 const irda_crc16_table[256] =
0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
}; };
unsigned short crc_calc( __u16 fcs, __u8 const *buf, size_t len) unsigned short irda_calc_crc16( __u16 fcs, __u8 const *buf, size_t len)
{ {
while (len--) while (len--)
fcs = irda_fcs(fcs, *buf++); fcs = irda_fcs(fcs, *buf++);
......
...@@ -220,9 +220,16 @@ static int ircomm_param_service_type(void *instance, irda_param_t *param, ...@@ -220,9 +220,16 @@ static int ircomm_param_service_type(void *instance, irda_param_t *param,
/* /*
* Now the line is ready for some communication. Check if we are a * Now the line is ready for some communication. Check if we are a
* server, and send over some initial parameters * server, and send over some initial parameters.
* Client do it in ircomm_tty_state_setup().
* Note : we may get called from ircomm_tty_getvalue_confirm(),
* therefore before we even have open any socket. And self->client
* is initialised to TRUE only later. So, we check if the link is
* really initialised. - Jean II
*/ */
if (!self->client && (self->settings.service_type != IRCOMM_3_WIRE_RAW)) if ((self->max_header_size != IRCOMM_TTY_HDR_UNINITIALISED) &&
(!self->client) &&
(self->settings.service_type != IRCOMM_3_WIRE_RAW))
{ {
/* Init connection */ /* Init connection */
ircomm_tty_send_initial_parameters(self); ircomm_tty_send_initial_parameters(self);
......
This diff is collapsed.
...@@ -517,6 +517,23 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self) ...@@ -517,6 +517,23 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self)
del_timer(&self->watchdog_timer); del_timer(&self->watchdog_timer);
/* Remove LM-IAS object now so it is not reused.
* IrCOMM deals very poorly with multiple incomming connections.
* It should looks a lot more like IrNET, and "dup" a server TSAP
* to the application TSAP (based on various rules).
* This is a cheap workaround allowing multiple clients to
* connect to us. It will not always work.
* Each IrCOMM socket has an IAS entry. Incomming connection will
* pick the first one found. So, when we are fully connected,
* we remove our IAS entries so that the next IAS entry is used.
* We do that for *both* client and server, because a server
* can also create client instances.
* Jean II */
if (self->obj) {
irias_delete_object(self->obj);
self->obj = NULL;
}
/* /*
* IrCOMM link is now up, and if we are not using hardware * IrCOMM link is now up, and if we are not using hardware
* flow-control, then declare the hardware as running. Otherwise we * flow-control, then declare the hardware as running. Otherwise we
...@@ -527,7 +544,7 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self) ...@@ -527,7 +544,7 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self)
IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __FUNCTION__ ); IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __FUNCTION__ );
return; return;
} else { } else {
IRDA_DEBUG(2, "%s(), starting hardware!\n", __FUNCTION__ ); IRDA_DEBUG(1, "%s(), starting hardware!\n", __FUNCTION__ );
self->tty->hw_stopped = 0; self->tty->hw_stopped = 0;
......
This diff is collapsed.
...@@ -42,6 +42,7 @@ ...@@ -42,6 +42,7 @@
#include <net/irda/wrapper.h> #include <net/irda/wrapper.h>
#include <net/irda/timer.h> #include <net/irda/timer.h>
#include <net/irda/parameters.h> #include <net/irda/parameters.h>
#include <net/irda/crc.h>
extern struct proc_dir_entry *proc_irda; extern struct proc_dir_entry *proc_irda;
...@@ -163,6 +164,7 @@ EXPORT_SYMBOL(irda_task_delete); ...@@ -163,6 +164,7 @@ EXPORT_SYMBOL(irda_task_delete);
EXPORT_SYMBOL(async_wrap_skb); EXPORT_SYMBOL(async_wrap_skb);
EXPORT_SYMBOL(async_unwrap_char); EXPORT_SYMBOL(async_unwrap_char);
EXPORT_SYMBOL(irda_calc_crc16);
EXPORT_SYMBOL(irda_start_timer); EXPORT_SYMBOL(irda_start_timer);
EXPORT_SYMBOL(setup_dma); EXPORT_SYMBOL(setup_dma);
EXPORT_SYMBOL(infrared_mode); EXPORT_SYMBOL(infrared_mode);
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment