Commit 2d7c22f6 authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Bryan Wu

leds: leds-gpio: set devm_gpio_request_one() flags param correctly

commit a99d76f9 leds: leds-gpio: use gpio_request_one

changed the leds-gpio driver to use gpio_request_one() instead
of gpio_request() + gpio_direction_output()

Unfortunately, it also made a semantic change that breaks the
leds-gpio driver.

The gpio_request_one() flags parameter was set to:

GPIOF_DIR_OUT | (led_dat->active_low ^ state)

Since GPIOF_DIR_OUT is 0, the final flags value will just be the
XOR'ed value of led_dat->active_low and state.

This value were used to distinguish between HIGH/LOW output initial
level and call gpio_direction_output() accordingly.

With this new semantic gpio_request_one() will take the flags value
of 1 as a configuration of input direction (GPIOF_DIR_IN) and will
call gpio_direction_input() instead of gpio_direction_output().

int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
{
..
	if (flags & GPIOF_DIR_IN)
		err = gpio_direction_input(gpio);
	else
		err = gpio_direction_output(gpio,
				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
..
}

The right semantic is to evaluate led_dat->active_low ^ state and
set the output initial level explicitly.
Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reported-by: default avatarArnaud Patard <arnaud.patard@rtp-net.org>
Tested-by: default avatarEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: default avatarBryan Wu <cooloney@gmail.com>
parent a49f0d1e
......@@ -127,7 +127,8 @@ static int create_gpio_led(const struct gpio_led *template,
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
ret = devm_gpio_request_one(parent, template->gpio,
GPIOF_DIR_OUT | (led_dat->active_low ^ state),
(led_dat->active_low ^ state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret < 0)
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment