dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl

Add device tree bindings for QDU1000 and QRU1000 TLMM devices.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221216230852.21691-2-quic_molvera@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
+
+maintainers:
+  - Melody Olvera <quic_molvera@quicinc.com>
+
+description: |
+  Top Level Mode Multiplexer pin controller found in the QDU1000 and
+  QRU1000 SoCs.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qdu1000-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 76
+
+  gpio-line-names:
+    maxItems: 151
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qdu1000-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|150)$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ atest_char, atest_usb, char_exec, CMO_PRI, cmu_rng,
+                dbg_out_clk, ddr_bist, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4,
+                ddr_pxi5, ddr_pxi6, ddr_pxi7, eth012_int_n, eth345_int_n,
+                gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_pps_in, hardsync_pps_in,
+                intr_c, jitter_bist_ref, pcie_clkreqn, phase_flag, pll_bist,
+                pll_clk, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+                qlink3_enable, qlink3_request, qlink3_wmss, qlink4_enable,
+                qlink4_request, qlink4_wmss, qlink5_enable, qlink5_request,
+                qlink5_wmss, qlink6_enable, qlink6_request, qlink6_wmss,
+                qlink7_enable, qlink7_request, qlink7_wmss, qspi_clk, qspi_cs,
+                qspi0, qspi1, qspi2, qspi3, qup00, qup01, qup02, qup03, qup04,
+                qup05, qup06, qup07, qup08, qup10, qup11, qup12, qup13, qup14,
+                qup15, qup16, qup17, qup20, qup21, qup22, SI5518_INT, smb_alert,
+                smb_clk, smb_dat, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tgu_ch4, tgu_ch5, tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tod_pps_in, tsense_pwm1, tsense_pwm2,
+                usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1,
+                vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@f000000 {
+        compatible = "qcom,qdu1000-tlmm";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 151>;
+        wakeup-parent = <&pdc>;
+
+        uart0-default-state {
+            pins = "gpio6", "gpio7", "gpio8", "gpio9";
+            function = "qup00";
+        };
+    };