Commit 2e12f536 authored by Romain Perier's avatar Romain Perier Committed by David S. Miller

net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator

Currently, dwmac-rk uses a custom propety "phy_regulator" to get the name of the
right regulator to use to power on or power off the phy. This commit converts the
driver to use phy-supply devicetree property and the corresponding API, it cleans
the code a bit and make it simpler to maintain. This also replaces the property
phy_regulator by the standard property phy-supply in rk3288-evb-rk808.dts.
Signed-off-by: default avatarRomain Perier <romain.perier@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 68c3a884
......@@ -161,7 +161,7 @@ vcc_lcd: SWITCH_REG2 {
};
&gmac {
phy_regulator = "vcc_phy";
phy-supply = <&vcc_phy>;
phy-mode = "rgmii";
clock_in_out = "input";
snps,reset-gpio = <&gpio4 7 0>;
......
......@@ -32,7 +32,7 @@
struct rk_priv_data {
struct platform_device *pdev;
int phy_iface;
char regulator[32];
struct regulator *regulator;
bool clk_enabled;
bool clock_input;
......@@ -287,46 +287,25 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
{
struct regulator *ldo;
char *ldostr = bsp_priv->regulator;
struct regulator *ldo = bsp_priv->regulator;
int ret;
struct device *dev = &bsp_priv->pdev->dev;
if (!ldostr) {
dev_err(dev, "%s: no ldo found\n", __func__);
if (!ldo) {
dev_err(dev, "%s: no regulator found\n", __func__);
return -1;
}
ldo = regulator_get(NULL, ldostr);
if (!ldo) {
dev_err(dev, "\n%s get ldo %s failed\n", __func__, ldostr);
if (enable) {
ret = regulator_enable(ldo);
if (ret)
dev_err(dev, "%s: fail to enable phy-supply\n",
__func__);
} else {
if (enable) {
if (!regulator_is_enabled(ldo)) {
ret = regulator_enable(ldo);
if (ret != 0)
dev_err(dev, "%s: fail to enable %s\n",
__func__, ldostr);
else
dev_info(dev, "turn on ldo done.\n");
} else {
dev_warn(dev, "%s is enabled before enable",
ldostr);
}
} else {
if (regulator_is_enabled(ldo)) {
ret = regulator_disable(ldo);
if (ret != 0)
dev_err(dev, "%s: fail to disable %s\n",
__func__, ldostr);
else
dev_info(dev, "turn off ldo done.\n");
} else {
dev_warn(dev, "%s is disabled before disable",
ldostr);
}
}
regulator_put(ldo);
ret = regulator_disable(ldo);
if (ret)
dev_err(dev, "%s: fail to disable phy-supply\n",
__func__);
}
return 0;
......@@ -346,14 +325,14 @@ static void *rk_gmac_setup(struct platform_device *pdev)
bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
ret = of_property_read_string(dev->of_node, "phy_regulator", &strings);
if (ret) {
dev_warn(dev, "%s: Can not read property: phy_regulator.\n",
__func__);
} else {
dev_info(dev, "%s: PHY power controlled by regulator(%s).\n",
__func__, strings);
strcpy(bsp_priv->regulator, strings);
bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(bsp_priv->regulator)) {
if (PTR_ERR(bsp_priv->regulator) == -EPROBE_DEFER) {
dev_err(dev, "phy regulator is not available yet, deferred probing\n");
return ERR_PTR(-EPROBE_DEFER);
}
dev_err(dev, "no regulator found\n");
bsp_priv->regulator = NULL;
}
ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment