Commit 2e1d18c6 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'omap-for-v4.6/fixes-rc1' of...

Merge tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer
SoCs with few board fixes and a fix for a long time hwmod bug:

- Fix cpsw_emac0 link type for baltos-ir5221
- Fix interrupt type for TWD
- Fix edma memcpy channel allocation for am43x
- Fix am43x-epos sycntimer32k by using the correct assigned clock
- Fix interconnect barrier for dra7
- Fix a long time hwmod bug for updating sysconfig register properly
- Fix flakey booting on dm814x where USB reset needs a delay

And there is one minor change that is not strictly a fix, but is
good to have for proper hardware detection:

- Detect dra7 silicon revision 2.0 properly

* tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
  ARM: OMAP: Correct interrupt type for ARM TWD
  ARM: DRA722: Add ID detect for Silicon Rev 2.0
  ARM: dts: am43xx: fix edma memcpy channel allocation
  ARM: dts: AM43x-epos: Fix clk parent for synctimer
  ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
  ARM: OMAP2+: hwmod: Fix updating of sysconfig register
  ARM: OMAP2+: Use srst_udelay for USB on dm814x
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 3de7beeb 6f40fed1
......@@ -470,9 +470,12 @@ &davinci_mdio {
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&cpsw_emac1 {
......
......@@ -207,7 +207,7 @@ edma: edma@49000000 {
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <32 33>;
ti,edma-memcpy-channels = <58 59>;
};
edma_tptc0: tptc@49800000 {
......
......@@ -794,3 +794,8 @@ &mcasp1 {
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&synctimer_32kclk {
assigned-clocks = <&mux_synctimer32k_ck>;
assigned-clock-parents = <&clkdiv32k_ick>;
};
......@@ -70,7 +70,7 @@ local-timer@48240600 {
compatible = "arm,cortex-a9-twd-timer";
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
interrupt-parent = <&gic>;
};
......
......@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
case 0:
omap_revision = DRA722_REV_ES1_0;
break;
case 1:
default:
/* If we have no new revisions */
omap_revision = DRA722_REV_ES1_0;
omap_revision = DRA722_REV_ES2_0;
break;
}
break;
......
......@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
void __init dra7xx_map_io(void)
{
iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
omap_barriers_init();
}
#endif
/*
......
......@@ -1416,8 +1416,6 @@ static void _enable_sysc(struct omap_hwmod *oh)
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
/*
......@@ -1481,6 +1479,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
_set_master_standbymode(oh, idlemode, &v);
}
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
}
......
......@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
.user = OCP_USER_MPU,
};
/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x10,
.srst_udelay = 2,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET,
.idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
......
......@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment