Commit 2e28f3e0 authored by Nikolai Kondrashov's avatar Nikolai Kondrashov Committed by Jiri Kosina

HID: uclogic: Use "frame" instead of "buttonpad"

Use the term "frame" instead of "buttonpad" for consistency, in UC-Logic
driver.
Signed-off-by: default avatarNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: default avatarJosé Expósito <jose.exposito89@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 2f290b39
......@@ -431,8 +431,8 @@ static int uclogic_params_frame_init_with_desc(
}
/**
* uclogic_params_frame_init_v1_buttonpad() - initialize abstract buttonpad
* on a v1 tablet interface.
* uclogic_params_frame_init_v1() - initialize v1 tablet interface frame
* controls.
*
* @frame: Pointer to the frame parameters to initialize (to be cleaned
* up with uclogic_params_frame_cleanup()). Not modified in case
......@@ -446,8 +446,7 @@ static int uclogic_params_frame_init_with_desc(
* Returns:
* Zero, if successful. A negative errno code on error.
*/
static int uclogic_params_frame_init_v1_buttonpad(
struct uclogic_params_frame *frame,
static int uclogic_params_frame_init_v1(struct uclogic_params_frame *frame,
bool *pfound,
struct hid_device *hdev)
{
......@@ -488,9 +487,9 @@ static int uclogic_params_frame_init_v1_buttonpad(
hid_dbg(hdev, "generic buttons enabled\n");
rc = uclogic_params_frame_init_with_desc(
frame,
uclogic_rdesc_buttonpad_v1_arr,
uclogic_rdesc_buttonpad_v1_size,
UCLOGIC_RDESC_BUTTONPAD_V1_ID);
uclogic_rdesc_frame_v1_arr,
uclogic_rdesc_frame_v1_size,
UCLOGIC_RDESC_FRAME_V1_ID);
if (rc != 0)
goto cleanup;
found = true;
......@@ -750,22 +749,22 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
goto cleanup;
} else if (found) {
hid_dbg(hdev, "pen v2 parameters found\n");
/* Create v2 buttonpad parameters */
/* Create v2 frame parameters */
rc = uclogic_params_frame_init_with_desc(
&p.frame,
uclogic_rdesc_buttonpad_v2_arr,
uclogic_rdesc_buttonpad_v2_size,
UCLOGIC_RDESC_BUTTONPAD_V2_ID);
uclogic_rdesc_frame_v2_arr,
uclogic_rdesc_frame_v2_size,
UCLOGIC_RDESC_FRAME_V2_ID);
if (rc != 0) {
hid_err(hdev,
"failed creating v2 buttonpad parameters: %d\n",
"failed creating v2 frame parameters: %d\n",
rc);
goto cleanup;
}
/* Link frame button subreports from pen reports */
p.pen.subreport_list[0].value = 0xe0;
p.pen.subreport_list[0].id =
UCLOGIC_RDESC_BUTTONPAD_V2_ID;
UCLOGIC_RDESC_FRAME_V2_ID;
goto output;
}
hid_dbg(hdev, "pen v2 parameters not found\n");
......@@ -779,21 +778,20 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
goto cleanup;
} else if (found) {
hid_dbg(hdev, "pen v1 parameters found\n");
/* Try to probe v1 buttonpad */
rc = uclogic_params_frame_init_v1_buttonpad(
&p.frame,
&found, hdev);
/* Try to probe v1 frame */
rc = uclogic_params_frame_init_v1(&p.frame,
&found, hdev);
if (rc != 0) {
hid_err(hdev, "v1 buttonpad probing failed: %d\n", rc);
hid_err(hdev, "v1 frame probing failed: %d\n", rc);
goto cleanup;
}
hid_dbg(hdev, "buttonpad v1 parameters%s found\n",
hid_dbg(hdev, "frame v1 parameters%s found\n",
(found ? "" : " not"));
if (found) {
/* Link frame button subreports from pen reports */
p.pen.subreport_list[0].value = 0xe0;
p.pen.subreport_list[0].id =
UCLOGIC_RDESC_BUTTONPAD_V1_ID;
UCLOGIC_RDESC_FRAME_V1_ID;
}
goto output;
}
......@@ -1067,7 +1065,7 @@ int uclogic_params_init(struct uclogic_params *params,
UCLOGIC_RDESC_UGEE_G5_FRAME_ID);
if (rc != 0) {
hid_err(hdev,
"failed creating buttonpad parameters: %d\n",
"failed creating frame parameters: %d\n",
rc);
goto cleanup;
}
......@@ -1096,12 +1094,12 @@ int uclogic_params_init(struct uclogic_params *params,
} else if (found) {
rc = uclogic_params_frame_init_with_desc(
&p.frame,
uclogic_rdesc_ugee_ex07_buttonpad_arr,
uclogic_rdesc_ugee_ex07_buttonpad_size,
uclogic_rdesc_ugee_ex07_frame_arr,
uclogic_rdesc_ugee_ex07_frame_size,
0);
if (rc != 0) {
hid_err(hdev,
"failed creating buttonpad parameters: %d\n",
"failed creating frame parameters: %d\n",
rc);
goto cleanup;
}
......
......@@ -652,12 +652,12 @@ const size_t uclogic_rdesc_pen_v2_template_size =
sizeof(uclogic_rdesc_pen_v2_template_arr);
/*
* Expand to the contents of a generic buttonpad report descriptor.
* Expand to the contents of a generic frame report descriptor.
*
* @_id: The report ID to use.
* @_size: Size of the report to pad to, including report ID, bytes.
*/
#define UCLOGIC_RDESC_BUTTONPAD_BYTES(_id, _size) \
#define UCLOGIC_RDESC_FRAME_BYTES(_id, _size) \
0x05, 0x01, /* Usage Page (Desktop), */ \
0x09, 0x07, /* Usage (Keypad), */ \
0xA1, 0x01, /* Collection (Application), */ \
......@@ -698,22 +698,22 @@ const size_t uclogic_rdesc_pen_v2_template_size =
0xC0, /* End Collection, */ \
0xC0 /* End Collection */
/* Fixed report descriptor for (tweaked) v1 buttonpad reports */
const __u8 uclogic_rdesc_buttonpad_v1_arr[] = {
UCLOGIC_RDESC_BUTTONPAD_BYTES(UCLOGIC_RDESC_BUTTONPAD_V1_ID, 8)
/* Fixed report descriptor for (tweaked) v1 frame reports */
const __u8 uclogic_rdesc_frame_v1_arr[] = {
UCLOGIC_RDESC_FRAME_BYTES(UCLOGIC_RDESC_FRAME_V1_ID, 8)
};
const size_t uclogic_rdesc_buttonpad_v1_size =
sizeof(uclogic_rdesc_buttonpad_v1_arr);
const size_t uclogic_rdesc_frame_v1_size =
sizeof(uclogic_rdesc_frame_v1_arr);
/* Fixed report descriptor for (tweaked) v2 buttonpad reports */
const __u8 uclogic_rdesc_buttonpad_v2_arr[] = {
UCLOGIC_RDESC_BUTTONPAD_BYTES(UCLOGIC_RDESC_BUTTONPAD_V2_ID, 12)
/* Fixed report descriptor for (tweaked) v2 frame reports */
const __u8 uclogic_rdesc_frame_v2_arr[] = {
UCLOGIC_RDESC_FRAME_BYTES(UCLOGIC_RDESC_FRAME_V2_ID, 12)
};
const size_t uclogic_rdesc_buttonpad_v2_size =
sizeof(uclogic_rdesc_buttonpad_v2_arr);
const size_t uclogic_rdesc_frame_v2_size =
sizeof(uclogic_rdesc_frame_v2_arr);
/* Fixed report descriptor for Ugee EX07 buttonpad */
const __u8 uclogic_rdesc_ugee_ex07_buttonpad_arr[] = {
/* Fixed report descriptor for Ugee EX07 frame */
const __u8 uclogic_rdesc_ugee_ex07_frame_arr[] = {
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x07, /* Usage (Keypad), */
0xA1, 0x01, /* Collection (Application), */
......@@ -736,8 +736,8 @@ const __u8 uclogic_rdesc_ugee_ex07_buttonpad_arr[] = {
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
const size_t uclogic_rdesc_ugee_ex07_buttonpad_size =
sizeof(uclogic_rdesc_ugee_ex07_buttonpad_arr);
const size_t uclogic_rdesc_ugee_ex07_frame_size =
sizeof(uclogic_rdesc_ugee_ex07_frame_arr);
/* Fixed report descriptor for Ugee G5 frame controls */
const __u8 uclogic_rdesc_ugee_g5_frame_arr[] = {
......
......@@ -117,23 +117,23 @@ extern const size_t uclogic_rdesc_pen_v1_template_size;
extern const __u8 uclogic_rdesc_pen_v2_template_arr[];
extern const size_t uclogic_rdesc_pen_v2_template_size;
/* Fixed report descriptor for (tweaked) v1 buttonpad reports */
extern const __u8 uclogic_rdesc_buttonpad_v1_arr[];
extern const size_t uclogic_rdesc_buttonpad_v1_size;
/* Fixed report descriptor for (tweaked) v1 frame reports */
extern const __u8 uclogic_rdesc_frame_v1_arr[];
extern const size_t uclogic_rdesc_frame_v1_size;
/* Report ID for tweaked v1 buttonpad reports */
#define UCLOGIC_RDESC_BUTTONPAD_V1_ID 0xf7
/* Report ID for tweaked v1 frame reports */
#define UCLOGIC_RDESC_FRAME_V1_ID 0xf7
/* Fixed report descriptor for (tweaked) v2 buttonpad reports */
extern const __u8 uclogic_rdesc_buttonpad_v2_arr[];
extern const size_t uclogic_rdesc_buttonpad_v2_size;
/* Fixed report descriptor for (tweaked) v2 frame reports */
extern const __u8 uclogic_rdesc_frame_v2_arr[];
extern const size_t uclogic_rdesc_frame_v2_size;
/* Report ID for tweaked v2 buttonpad reports */
#define UCLOGIC_RDESC_BUTTONPAD_V2_ID 0xf7
/* Report ID for tweaked v2 frame reports */
#define UCLOGIC_RDESC_FRAME_V2_ID 0xf7
/* Fixed report descriptor for Ugee EX07 buttonpad */
extern const __u8 uclogic_rdesc_ugee_ex07_buttonpad_arr[];
extern const size_t uclogic_rdesc_ugee_ex07_buttonpad_size;
/* Fixed report descriptor for Ugee EX07 frame */
extern const __u8 uclogic_rdesc_ugee_ex07_frame_arr[];
extern const size_t uclogic_rdesc_ugee_ex07_frame_size;
/* Fixed report descriptor for XP-Pen Deco 01 frame controls */
extern const __u8 uclogic_rdesc_xppen_deco01_frame_arr[];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment